129,247 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Hassia Type: Redatron The packaging machine is designed a vertical hose bag packaging machine for continuous operation. 60 packages per minute Size of packaging: maximum length: 400 mm maximum width 200mm optionally with euro hole tear-open thread 3 x 380 V 220 V 50 Hz
Machine for stripping cables - see picture
Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...
Technical data for the pallet rack traverse: Shelving system: Redirack Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 120 x 50 mm Clear width: 3,205 mm load per pair of trusses 2,575 kg, at the same time. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried o ...
Vulcatherm Infra Red Oven 250degC max temp with control ID 320x130x2000mm
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed...
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...
Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...
Trough chain conveyor TKF Redler up to 120 to/Hused Trough width inside approx.: 300 mm Trough depth inside approx.: 320 m Trough length approx.: 6800 mm Inlet opening approx.: 300 x 400 mm Exhaust opening approx.: 300 x 600 mm Taker distance approx.: 130 mm Drive motor NORD 220/380 V, 1.5 kW, 1410/18 rpm by replacing the engine, power can be increased Total length approx.: 6900 mm Other names: TKF, Reedler, Chain Conveyor
Protection level: 9 - 13 M Power supply: 3 Volt weight: 2 kg dimensions: 300 x 240 x 240 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Redpack P200 Flow wrapper Serial: 660 Stainless flow wrapper, 5500mm overall length with 3500mm infeed, 300mm jaw width, max product height 120mm,
The scope of delivery includes: 18x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: red Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | Pcs.: 0.790 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pla ...
The scope of delivery includes: 112x open fronted storage boxes, used Manufacturer: SSI Schaefer Type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls Colour: red Material: Polypropylene External dimensions LxWxH: 500x156x143mm Inside dimensions LxW: 448x123mm Usable height in stack: 127 mm Dimensions bulkhead opening: 85x60 mm (WxH) Capacity: 7.60 litres Stackable: yes Weight | Pcs.: 0.790 kg Note: These are used stacking boxes. There may be scratches, dirt and Color errors may be present. Application: The open fronted storage boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the pl ...
1 IBELUS laboratory HT beaker dyeing machine, type LABIbelus 12 Infra Red, with 1 set of 12 high temperature beakers, maximal dyeing temperature 140º C, dye cycle controller IBELUS type IL-720
Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V
Hassia Redatron FlexiBag 40/25 vertical form, fill & seal machine for pouches with auger dosing, bag size min. 60 x 50 mm (LxW), max. 400 x 260 mm (LxW), filling volume max. 4.4 litre, max. width of the foil reel 540 mm, maximum diameter of the foil reel 600 mm, electrics 3X230/400 V/50 Hz, capacity up to 150 cycles per minute
Bruks RR800 Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 800 mm measured 1500 mm from the root and Length min 3,2 m max 6,2 m Number of cutting tools 30 Cutting tool width 60 mm Cutting motor 37 kW, 1500 rpm Cutting length 900 mm Roller chain driver: gear reductior transmission motor of 2.2 kW Hydraulic unit 5,5 kW Total weght including main motor 5000 kg
Filmbelichter / Film Processor ECRM 360 Laser Red Serial-No. 4943 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...
measuring range X-axis: 300 mm measuring range Y-axis: 250 mm measuring range Z-axis: 600 mm tool diameter: mm Table dimensions: mm Control: weight: 700 kg dimensions of machine: 2600 x 1400 x 1900 mm coolant tank: 800 x 600 x 920 mm Presetting, shrinking and measuring machine Software saturn 1 Zoller Multivision II Without toolholders. On 30. May 2022 the machine was checked by a technician from ZOLLER. Shrinking is currently not possible. The induction spool and the control unit for it must be renewed. The purchase price of a comparable new machine (incl. software) from ZOLLER is approx. 100.000 EUR, with a current delivery time of approx. 52 weeks ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used hermetic, self-cleaning centrifuge made by REDA, model: RE150T, capacity: 15.000 liters / hour, new: 1998 Centrifuge serviced. Last service on February 16, 2022.
Height=0.4 m, Overall length= 0.45 m, Overall width= 0.45 m, Net weight= 20 kg,
APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm
Height=0.46 m, Overall length= 0.63 m, Overall width= 0.59 m, Net weight= 48 kg,
Relay Module 16 chanal model : RP-05W Input:24 VDC Output: 220VAC 5A brand : Primus
Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG eco 2800 K complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 30 – 280 amps Duty cycle 30% ED at 280 amps 60% ED at 210 amps 100% ED at 180 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 97 kg Age 12 months Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of ...
Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.
used
1 UNITECH stenter type Redevo, year 2014, width 220 cm, 6 fields, gas heating, combined pin and clip horizontal chain, BIANCO finishing padder, MAHLO weft streigthener
Diagonal duct fan, 3x230V, 500mm, 9880m³/h, TDE 500 D4, Red Ring, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. Diagonal tube fan, 3x230V, 500mm, 9880m³/h, 1.5 KW, TDE 500 D4, Red Ring, as good as new -40% Aluminium housing and impeller 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and cond ...
Industrial tube fan with accessories, D560mm, TGT 560-4D + .., Red Ring, new -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. Industrial duct fan with accessories from Red Ring consists of: - Industrial duct fan TGT 560-4D, 230/400V, 1440rpm, 0.75KW, flange D660/565mm, TK625mm Z=12, - Extension pipe VL-T 560, L 195 mm, - 2 protective grilles SG-T 560 - Mounting bracket AK-T 560, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in ca ...
Manufacturer: REDMER Model: 3-K10/200 Year of Manufacture: 1989 Press Force: 1000 kN (10 Ton) Motor Power: 3.74 kW Find more here - / Contact us at -
Gearboxes, bevel gears, worm gears, roller conveyor gears -Manufacturer: Düspohl, gearbox with encoder -Translation: i = ? -Hollow shafts: Ø 32 x 80 mm -Shaft distance: 197 to 206 mm, dimensions see photo technical drawing -Encoder: Red Lion Controls 4601200 -Dimensions: 1120/100/H155 mm -Weight: 28 kg
Kündig Brilliant-2 1100 REd Paint Quality product from Switzerland CONSTANT TABLE MACHINE / automatic Headhead delivery Wide-belt calibration fine grinding machine 1. Grinding unit with rubber contact roller in proven hardness 2. Grinding unit DIAGONAL with segment sanding pad 22 mm 2 belt drive motors 15 kW and 11 kW, with soft start Working width 1100 mm Lacquer sanding package Contact roller level infinitely height-adjustable according to abrasive grain scale Pneumatic lifting/lowering of the contact roller according to the choice of unit Entire sanding pad unit can be tilted 10° Vacuum device for entire work table with additional perforations for smaller workpieces Automatic thickness adjustment over the entire working width Stepless regulation of chip removal Electronic feed control on the control panel, infinitely variable 3 - 15 m/min PLC control/programming touc ...
Finishing machine single-sided machining or double-sided machining, second-hand 3 FLAKKO units with 4 disc tools each: Drive power 7.5kW Spindle speed 300 - 2500 rpm Feed speed 2-20 m/min Wet machining Tool diameter 230mm Working width 400mm for single-sided machining Working width 200mm for double-sided machining with turning device Special magnetic inserts designed for hot machining IPC control with PLC Connected load 3x 400V 50Hz Connected load approx. 52 kW Overhaul of all units with conversion to new 4-point bearing between 2021 and 2023. Special-price 25.000 EURO, net -free loaded truck- Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Overview This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, d ...
Used Reda pastoeurizer - speed 1800LhTechnical Specifications & Performance DataThis Pasteurizer manufactured by Reda delivers reliable thermal processing performance for beverage production and dairy applications. Engineered for consistent heat treatment, it is suitable for pulp-free juices and milk, ensuring product safety, extended shelf life, and stable sensory profiles. Ideal for second hand industrial packaging and used bottling line integrations, it supports continuous operation in modern processing environments.Manufacturer: RedaType: Pasteurizer (flash process capability)Capacity: 1800 L/hYear of manufacture: 2000Maximum pressure: 6 barMaximum temperature: 130 °CProduct compatibility: Pulp-free juices, milkThermal balance note: With cold-water service available, inlet and outlet temperatures at 4 °C can be maintainedAdvanced Automation & Control SystemsDesigned for dependa ...
Using, for example: with four side moulder Width: 1590 mm Length: 1850 mm Height. : 2160 mm Hole size: 250x180 mm Transport dimensions: 2160x1850x1590 mm
Pressure reducing valve, XLC 410, DN50, PN25, CSA, new We have set the lowest price for the new part on the market. If you have a UID number, we will be happy to issue you an invoice without VAT. New! The part was bought from a spare parts warehouse of a company and has never been in operation and is completely new. The CSA model XLC 410 is a hydraulically operated automatic control valve that reduces and stabilizes the pressure behind the valve to a constant value, regardless of fluctuations in requirements and pressure conditions in front of the valve. Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.
Pressure reducer, pressure regulator, pressure gauge -for nitrogen -Inlet pressure: max. 25 bar -Output pressure: 0-1.5 bar adjustable -Quantity: 1x Minor available -Weight: 1.3 kg
Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.
Pressure reducers, pressure regulators, manometers -for forming gas -Inlet pressure: max. 200 bar -Output: flow meter -Number: 2x reducers available -Price: per piece -Weight: 1.8 kg/piece
Pressure reducers, pressure regulators, manometers -for nitrogen -Inlet pressure: max. 200 bar -Outlet pressure: 0 - 50 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.6 kg/piece
maximum number of results exceeded
please refine your search
18 € 
