recycling used for sale

1 used BIBKO RAM 16, built in 1996. without control and in need of rep., from stock, immediately available, free loading

We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.

TBL SREC 12 - residual concrete recycling plant - COMPLETE - with STETTER RA 12 Washing drum factory new 0.0 operating hours with guarantee including control unit including feeding table Includes 3 submersible pumps (1 piece submersible pump, for truck mixer washing pipe 2.2 kW, 1 submersible pump for returning the recycling water to the washing drum 2.2 kW, 1 submersible pump for draining the recycling water to the water dosing hopper of the concrete mixing plant 3 kW) Washing capacity for normal concrete 12 m3/h Washing capacity for normal mortar 5 m3/h max. particle size 63 mm Separation cut 0.2mm Rinse water volume (adjustable) 7-12 m3/h Rinse water connection for washing drum DN 50 Drain pipe DN 200 Water content of the drum (fill level) 2 m3 Washing drum follow-up time (adjustable) 20 min If required, including delivery, assembly and commissioning Pri ...

HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg

Complete plastics recycling plant in operation. PRICE MACHINE WITH 2 PISTON FILTERS: 520.000€ PRICE MACHINE WITH 1 PISTON FILTER AND A 1 BRITAS FILTER MODEL ABMF 1050-12: 660.000€ 8,500 HOURS OF WORK. IN PERFECT CONDITION. PRODUCTION /HOUR: 900/1,000 KGS. MATERIAL: LDPE, QUALITIES 98/2 AND 99/1 AFTER 1 WASH.

Complete Britas filter with many spare parts. Off site, available immediately.

UNOTECH package press from 2018 with approx. 13 - 14,000 Bh. and a sufficient package of wearing parts. the baling press is designed for baling of metal cans and metal blanks Find more here - .ucymachines/

Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - .ucymachines/

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - .ucymachines/ Contact us at - sales@ucymachines

For sale: Paper recycling and sorting machine with integrated reversible conveyor belt system 1) Paper Processing Machine Manufacturer: Hartner Year of Manufacture: 2013 Operating Hours: 3500 2) Reversible Conveyor Belt Manufacturer: Hillebrand Model: 4 GB 1400 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Mogensen Model: AF091 Year of Manufacture: 2003 Type of Machine : Optical Flake sorter Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Wackerbauer Model: TM 75 Year of Manufacture: 2013 Type of Machine : separation mill Food waste (out-of-date and/or packaged food, manufacturing waste) from the food industry, organic waste, etc., is conveyed into the separation mill via a conveyor system. There, the material is unpacked, separated from impurities, and ground into a virtually impurity-free substrate with a two-dimensional grain size of max. 12 mm. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: EREMA Model: 1514T Application: Designed for Post-Industrial processing (no filters or gas extractor). Usage: Very few operating hours, previously used with BOPP edges. Technical details: - Unique 140mm spindle - Nominal capacity: 1,200 kg/h Included equipment: - Wet cutting head unit - Aggregator - Conveyors - Extruders - PREVIERO mill -Model: Q4 GR -Year of Manufacture: 2013 - Metallic structure (compatible with mill if installation height allows) Find more here - .ucymachines/ Contact us at - sales@ucymachines

GAMMAMECCANICA Compac 125 mm. Construction year 1998 Including Loading conveyor belt, Metal detector, Compactor with driven haul off for reels, master dosing unit Engin Plast, Extruder 125 mm diam. 36 L/D with degassing pump d.c. Ansaldo drive 197 kW, Total installed power 501 kW motor, BD plast non-stop screenchanger diam. 200 mm, hydraulic power station, water ring pelletizer M 8500, Electrical cabinet, Type of machine: GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm.

Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Lundberg ‎ Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8) transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - .ucymachines/ Contact us at - sales@ucymachines

used screening machine, function-tested, immediately available

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

AMB pre-shredding machine type 753 The plant is already completely dismantled, incl. the hydraulic aggregates and would be ready for pick-up The machine was built in 2004 and was used by us for the pre-shredding of household and bulky waste. It then served as a backup from 2010 to 2022. We have already dismantled the machine and hydraulic unit and stored them on site. Before dismantling, we carried out another test run - without any problems. As the plant had already been dismantled, there was no time pressure. As part of the optimization of the system, the manufacturer AMB installed two additional drives for the shafts - as can be seen in the pictures. Find more here - .ucymachines/ Contact us at - sales@ucymachines

An untested vacuum distillation unit/solvent recycling unit Lömi for the recovery of organic solvents is available. Volume: 50l, operating volume: 30l, distillation capacity range: 8l-20l/h, max. operating temperature: 250°C, protection: EX, vacuum pump type: LÖ/V 6, max. vacuum pressure: 80mbar. Machine dimensions X/Y/Z: approx. 1450mm/600mm/1800mm, weight: approx. 300kg. An on-site inspection is possible.

This used PY-D continuous distillation unit converts waste engine oil, pyrolysis fuel oil, and heavy crude oil into non-standard diesel fuel with a high yield of 80–90%. The horizontal-type reactor operates at normal pressure using a hot-air heating method and cycle-water cooling, making it a reliable, low-maintenance solution for industrial waste oil recycling. Emission control is handled by a new DE-sulfurization smoke scrubber system. Full Technical Specifications - Equipment Model: PY-D - Suitable Raw Materials: Waste engine oil, Pyrolysis fuel oil, Crude oil - Structure: Horizontal Type - Daily Capacity: 5 – 6.5 MT - Work Pressure: Normal Pressure - Oil Yield: 80% – 90% - Power Consumption: 18 kW/H - Cooling Method: Cycle water - Condensers: 4 pieces of Vertical condensers - Emission Treatment: DE-sulfurization Smoke Scrubbers - Heating Method: Hot Air - Type of Installation ...

For sale: a complete waste recycling plant, fully equipped with automated sorting,shredding, separation, and material recovery systems. Overall Process Summary 1. Feeding and battery detection (WeSort AI) with pre-shredding and screening 2. Ballistic separation into flat fraction, rolling fraction, and fines 3. Multiple NIR sorting stages (P2000 / PV2000 / P2800) for PVC, EBS, Wood, PP/PS/PE/EPS 4. X-Ray mineral sorting, ISS Eddy Current separation, Zig-Zag air classification, overband magnets, flip-flow screening 5. Post-shredding with Lindner Komet and SRF dosing with secondary shredding 6. Final SRF/EBS discharge with ferrous and reject handling 7. Manual sorting cabin with dust extraction (Schuko filter system) 1. Feeding and Pre-Treatment - Feeding crane - Feed bunker - Intermediate feed conveyor and screen feed conveyor - Screen and screen discharge conveyor - Analysis  ...

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

Compactor for SALE - good price! Producer - Pottinger Type - MP1900 Year of production - 2004 Power - 5.5 kW Condition - used in working condition (without reconstruction)

Type - HKV Manufacturer - Ludden & Mennekes Year of manufacture - 2013 Stationary operation. Operates from the loading ramp. EXW Vilnius - 5000 EURO

Complete, fully integrated wood pelletizing and shredding line, delivered new in May 2023. Originally engineered and supplied as a turnkey solution. The plant processes A1 waste wood and single use pallets into DIN compliant heating pellets, covering the full process from automatic material feed through two stage shredding to pellet pressing, cooling and bagging. Year of manufacture: 2023 Condition: Used, like new Manufacturers: AMIS, SPANEX, Grecon, ECOKRAFT Technical Data - Purpose: processing of A1 single use pallets, ideal input moisture 10 to 12 percent, into heating - pellets with 6 mm die - Tested output: approximately 460 kg per hour total, 230 kg per hour per ECOKRAFT LP22 pellet - press, using 2 percent corn starch as binder, dust content under 3 percent - Total connected load: 275.5 kW - Required supply fuse rating: 500 A at 400V - Footprint: approximately 23 x 18.5 meter ...

For a full 3D tour of the installation: https://my.matterport.com/show/?m=eC14zRUg6Fw 24/7 Plastic Recycling plant according to the Pyrolysis process, processing capacity approximately 30T plastic per day, (yield at least 22,500L pyrolysis oil) The lot from the Tender sale will also be offered in parts via an online auction: https://www.troostwijkauctions.com/a/fabriekssluiting-cct-circular-cle antech-b-v-chemische-recyclingfabriek-voor-plastic-afval-A1-48582 . The client awards at its own discretion to the bidder on the whole (direct sale) or to the bidders per lot and thus does not award the whole (online auction). Award in one route excludes award in the other. Auction-ID: A1-48583-1

For a full 3D tour of the installation: https://my.matterport.com/show/?m=v6b3Sjbw3xB Complete \"Bollegraaf\" plastic sorting installation; Equipped with Coarse/for shredder \"Lindner\" type Micromat 2000, (2018), 132 kW, equipped with 68 chisels on shaft, reducer \"Stiebel\" (2018), 45,000 Nm/682 kg, single shaft principle, odometer reading 190; Fine shredder \"Lindner\" type Komet 2200 (2019), 2x 132 kW, equipped with 60 chisels on shaft, closed receiving hopper, single shaft principle, odometer reading 910; Sorting and screening installation, \"Lubo\" type AWS 330/2540/7500, equipped with color sorter, \"Tomra\" Autosort unit, (2018), working width 2800 mm, roller screen with sorting belt, under collection hopper and discharge belt, cross discharge conveyor belt, type HBGT 250/1000, (2022), equipped with Nir +color detection, EM 3 sensor, ultra high resolution, minimum detect s ...