reco used for sale

Available two units of this SIAT RECOPACK recovery boiler. This boiler recovers the heat from the exhaust gases of turbines or engines, but it doesn't have burner to produce his own heat. They are disassembled and ready to be load. Power 493kW pressure 12 bar Capacity 5065 l YOM 2009 Model Recopack

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

CAT C13 overhault engine bloc (RECON) CAT C13 overhault crankshaft (RECON) CAT C13 overhault connecting rods (RECON)

-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg

saw blade diameter: 315/350 mm capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 160x90 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 90 mm capacity 60 degrees: flat: 80x100 mm total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,6 x 1,22 x 1,06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 50 mm -Clamping depth: max. 110 mm -Dimensions: 460/160/H120 mm -Weight: 36 kg

Machine vise, sturdy vise, drill vise -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Roto Record, four-jaw chuck Ø 315 mm -Throughout: Ø 98 mm -Hole circle: Ø 290 mm -Weight: 30 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 355 mm -Admission thread pitch: 4 mm -Rezess: Ø 70 mm -Weight: 35 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 24.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg

diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Record Panda1000 flow wrapper Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph

Semi-automatic, Fabr. Schmidt, Record,

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 19 kg

Recycling machine trade AGICOM-Pedergnana OG:The JMC 200 has a mechanically adjustable counter holder. The scissor head is operated with a foot pedal for single cuts or continuous cutting. The scissor head is protected with a safety cage. Overall dimensions: L 1100 x W 600 x H 1400 mm Total weight: approx. 550 kg Knife length: 203 mm Max. knife opening: 140 mm Cutting force: 52 tons Cutting capacity: round bar 38 mm diameter (ST 37) Main drive: 3 phases: 4 kW Cutting strokes p/min.: up to 20 / min

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg

ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg

ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates

Semi-automatic, Fabr. Schmidt, Type Record30 tlg, Size 1 / 20 - 70 g

Semi-automatic, Fabr. Schmidt, Type Record30 tlg, Size 1 / 20 - 70 g

Semi-automatic, Fabr. Schmidt, Record,

Semi-automatic, Fabr. Schmidt, Record,

Semi-automatic, Fabr. Schmidt, Record,

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece -Total dimensions: Ø 50 x 143 mm -Weight: 0.6 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Weight: 6 kg

SECOND-HAND WORKING CENTER SCM MOD. RECORD 1 - CE RULES - table mm. 2000X800 - year 1996

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -exciting: centric -Replaceable jaws: soft -Weight: 22 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

SCM machining centre model RECORD 220 : - Useful axis stroke 3250 x 1300 x 300 mm - workpiece useful passage 320 mm - 3180 x 1250 mm multifunctional worktop - 3+3 reference stops for pendulum machining - Becker vacuum pump of 250 mc/h - Centralized automatic lubrication - NUM 1040 electronic control, with Alphacam software - machine according to CE standards, with bumpers and perimeter protections - year of production 1998 - Machine weight kg 8100 Operating units: - vertical electrospindle with inverter 900 – 18,000 rpm, ISO30 connection, with 4th VECTOR rotary axis, served by an on-board tool changer 10-position (RAPID 10) - drilling unit with vertical axis with independent control and encoder, and with 39 spindles as follows: 15 vertical spindles on X-axis 14 vertical spindles on Y-axis 2+2 horizontal spindles on X-axis 3+3 horizontal spindle ...

2004 Record Jaguar MD S.S Flow wrapping machine Find more here - / Contact us at -

Used R&B RECORD 12 wierhooder 12000 BPHTechnical Specifications & Performance DataThe Wirehooder RECORD 12 with double distributor is a high-efficiency machine engineered for securing wire cages on sparkling wine and similar glass bottles in industrial packaging environments. Designed for continuous operation in a used bottling line or as a standalone station, it delivers reliable, second hand performance for beverage production where consistency and throughput are essential.Model: RECORD 12Maximum speed: 12,000 bphRotation direction: Clockwise, left to rightYear of manufacture: 2016Double distributor: Supports 2-leg and 4-leg wire cagesDual magazines: Approx. 6,000 cages eachContainer handling: Designed for Glass bottle handlingAdvanced Automation & Control SystemsEngineered to reduce changeover time and operator intervention, this wirehooder integrates recipe-driven automation and prec ...

Plastic recycling plant, Starlinger Recostar 65 U2; Roto diameter = 400 mm, Roto speed = 73/76 d/dk; Number of knives = 48, Shredder capacity = 350 kg/h, Screw diameter / length= 65/24D, Performances  PP = 90- 180 kg/h, HDPE = 90-180 kg/h, LDPE = 110 -200 kg/h  HP = 110 - 200kg/h Dimensions = 9930 mm X 7050 mm X3150 mm

Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001