rear used for sale

new rear light, incorrectly ordered, from stock

The scope of delivery includes: 01x rear wall grille, used Material color: sendzimir galvanized Total width: approx. 2,700 mm Total height: approx. 1,500 mm Mesh size: approx. 103 x 53 mm Mesh size (elevation): approx. 53 x 53 mm Frame profile illustration: L approx. 30 x 30 mm Wire thickness: approx. 1.75 mm Hole diameter: approx. 7 mm Hole grid spacing: approx. 25 mm Weight/ pcs.: approx. 10,40 kg

Rear weight, forklift weight -Manufacturer: Clark, rear weight from forklift type C500-Y80 -Recording/Dimensions: see photos -Dimensions: 1275/570/H940 mm -Weight: 1405 kg

Rear weight, forklift weight -Manufacturer: Clark, tail weight -Recording/Dimensions: see photos -Transport dimensions: 1110/1000/H650 mm -Weight: 1900 kg

The scope of delivery includes: 01x Rear wall grille, used Material color: similar. beige overall width: approx. 1,200 mm total height: approx. 1,100 mm Mesh size (outer): approx. 93 x 53 mm Mesh size (inside): approx. 88 x 48 mm Frame profile dimensions: L-profile 30 x 30 mm The rear wall grilles are rusted, partially the frame profile is damaged, see pictures.

Year: 2017 - technically efficient, ready to work - after full service - processing of 2 profiles - support table

Rear axle, steering axle -Manufacturer: Linde, rear axle steering axle from front forklift type H30T -Individual components: see photos -Price/Fee: complete -Dimensions: 1140/410/H350 mm -Weight: 105 kg

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,200 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 8,14 kg Internal designation: RW-2

Year: 2012 - technically efficient, ready to work - after full service - processing of 2 profiles - wing/frame

Auction-ID: A1-45411-206

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,000 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 7,17 kg Internal designation: RW-3

Used rear wall grille for pallet racks - approx. 1,500 x 2,780 x 30 mm Used lattice back panel from a pallet rack in very good condition. With this lattice rear wall, you can secure walkways and driveways behind a pallet rack against falling stored goods. However, they can also be used for other applications, such as safeguarding machines or workplaces. These grids are also often used to demarcate storage areas or picking stations. Properties: - Used back wall grid for pallet racks - For securing running areas - Dimensions: 1,500 x 2,780 x 30 mm - Mesh size: 45 x 45 mm - Frame painted in blue - In very good condition - Available or ready for pick-up by arrangement Properties: Frame color: blue Grid: galvanized Mesh: 45 x 45mm Dimensions: Height: 1,500mm Width: 2.780mm Depth: 30mm

We offer: 1 used rear wall grille Dimensions: approx. 2,700 x 850 mm There are 15 pieces in stock 21698 Harsefeld Per piece € 80,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.

Technical data according to Muller Martini

Two new Meritor bridges, serial number R96661073

Auction-ID: A1-45411-216

Rear grinding machine with permanent magnetic clamping plate JUNG type HA 20EquipmentNo: 3344Profile depth: max. 15 mmAngle adjustment: 0 to 2Magnetic plate: 115 x 115 mmClamping range: 110 x 75 mmHeight magnetic plate: 119 mmWorkpiece dimensions L x W x H: max. 60 x 100 x 50 mmPower consumption: 1 ampereOperating voltage: 24 volts, direct voltage (V/DC)- mechanically switchable permanent magnetDimensions L x W x H: 500 x 200 x 125 mmWeight: 25 kggood conditionSuitable for cutting tool mold making for conical background cutting plates or

The scope of delivery includes: 01x Rear wall grille, used Material colour: yellow Overall width: approx. 2,740 mm Total height: approx. 1,100 mm Mesh size: approx. 50 x 50 mm Frame profile size: approx. 40 x 40 x 4 mm Wire thickness: approx. 3.0 mm Weight | Pcs.: approx. 26.84 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Complete Retrofit Rear Window + Windshield Wiper + Fastening Material new and unused Fits normal Linde 386, E16, E18, E20 (not special height or EX protected) Loading onto pallet trucks no problem Delivery by freight forwarder possible on request. Auction-ID: A1-45449-1025

Equipped with conditioner; 3-point connection; 8 discs with 2 knives each; Auction-ID: A1-40133-252

Mercedes-Benz Sprinter 313 CDI Flatbed – Reinforced axle version General vehicle data • Manufacturer: Mercedes-Benz • Model: Sprinter 313 CDI (Type 906 OK 35) • Registration date: 13.03.2007 • Mileage: 150,000 km • Engine: 2,148 cc diesel (OM646) • Power: 95 kW / 129 hp • Transmission: 6-speed manual transmission • Propulsion: rear-wheel drive • Emission standard: Euro 4 with diesel particulate filter • Permissible total weight: 3,500 kg • Payload: approx. 1,350 kg • Towing capacity: 2,000 kg braked / 750 kg unbraked • Technical inspection valid until: 06/2026 • Approval: Truck open box Chassis / axles (reinforced version) • Front axle reinforced – axle load 1,650 kg • Rear axle reinforced – axle load 2,250 kg Structure • Flatbed with aluminium side walls • Lashing eyes in the loading floor • Side wall closures ...

Mateng Dynamic 220 – rear and side mulcher (new machine built in 2025) General data • Machine type: rear / side mulcher • Manufacturer: Mateng • Model: Dynamic 220 • Year of construction: 2025 • Working width: 2,200 mm • Weight: approx. 832 kg • Condition: New machine Technical equipment • Suitable for tractors of approx. 80–120 hp • Tilt angle: approx. -50° to +90° • Hydraulic side shift • Displacement: left 672 mm / right 1,528 mm • PTO: 540 rpm • CMR gearbox with freewheel • 4 belt drive • Rotor electronically dynamically balanced • Rotor speed: approx. 2,047 rpm • Rotor Ø: 168 mm (with flail Ø 436 mm) • 24 mallets, staggered • Flail weight: approx. 1.37 kg • Hammer bolt M16 • Adjustable back-up roller Ø 168 mm • Two rows of counter blades for optimal shredding • Collision protection • Robust cons ...

Mateng RFMax 280 – front and rear mulcher (new machine built in 2025) For sale is a new Mateng RFMax 280 front and rear flail mower. General data • Machine type: Front / rear mulcher • Manufacturer: Mateng • Model: RFMax 280 • Year of construction: 2025 • Working width: 2,750 mm • Overall width: approx. 2,995 mm • Weight: approx. 1,560 kg • Condition: New machine Technical equipment • Suitable for tractors from approx. 120–220 hp • Front and rear mounting possible • Hydraulic side shift (left 506 mm / right 614 mm) • PTO drive: 1,000 rpm • CMR gearbox with freewheel • Automatic belt tensioning • 5 belt drive • Rotor electronically dynamically balanced • Rotor speed: approx. 2,192 rpm • Rotor Ø: 203 mm (with flail Ø 455 mm) • 24 mallets, staggered • Flail weight: approx. 1.2 kg • Hammer bolt M16 • Adjustabl ...