ready used for sale

Key data: 90

A brand-new extrusion recycling product UMAC (EREMA Group) series READYMAC Type 1109 TVE for processing polyethylene (PE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and polyamide 6 (PA6), with screen changer type SW RF, for processing printed films. Fully equipped. Capacity up to 450 kg/h, electrics 240/400 volts, 50 heart, immediately available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

REF-0 WINUS C2-W11 READY GLYCOL WATER COOLER Brand: WINUS Model: C2-W11 Ready Serial no.: 002094 Year: 2012 Glycol water chiller for different applications. It controls automatically the temperature of both the glycol and the product. Suitable for up to 8 connections. Complete with all the accessories of the hydraulic circuit, including the circulation pump, the storage tank and their respective safety devices. Power supply: 400 V/3P/50 Hz + N/PE Auxiliary circuit voltage: 12/24 V Cooling capacity (1) / (2): 11 kW / 4.5 kW Refrigerant gas: R-404A Refrigerant charge: 3.7 kg Max. pressure low side/high side: 22.6 bar/28 bar Air flow rate: 5,000 m3/h Glycol water flow rate: 3,200 l/h Overall dimensions (mm): 1,250 x 1,170 x 1,010 (LxWxH) Weight: approx. 250 kg CE marking

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

PRT WATER RING PELLETIZER, for PE PP PS PC ABS, nominal capacity 600-700 kg/h (tested up to 900 with PS), N.4 cutting blades, N.1 thermoregulation zones, Heating power 8.00 kW, Cutting motor power 4.00 kW, N.1 water pumps, heat exchanging unit, Single water pump power 3.00 kW, Vertical centrifuge power 5.50 kW, Steam vacuum power 0.25 kW, soundproofed discharging cyclon, Total installed power 20.75 kW, constructed in 2006, only 200 worked hours, installed power - used power in work: about 60-65% : 20.75, availability: immediate, capacity: 600-700 kg/h (tested with PS 900 kg/h), PRESENT CONDITIONS: as new, excellent quality, price is less than 50% of a new one

PRT RECYCLING EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, Constructed in year 2000 - very few hours of work, NEW Crammed feeder new 2023 FF85VE, 60 kw Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, Manual screenchanger, NEW 2023 Water ring pelletizer WF150, Drying centrifuge, Total installed power cutting group 14 kw, Vibro classifier, Total weight about 3 Tonnes, excellent conditions, MATERIALS: PE PP PC PS ABS PS, capacity: ca.200 kg/h depending on materials and feeding rate, availability: ready-to-go

VIBRATING SCREEN 2 OUTLETS, Support structure made of painted carbon steel, Screen dimensions 1500x500 mm, n.2 material discharge outlets, upper screening frame 8 mm., closed at the start for 200 mm, with flow deflector flaps, AISI 304 stainless steel mesh, Drive system comprising 0.75 kW, 1 HP B3 P4 400 V 50 Hz electric motor,, eccentric drive unit., Fixed side and top safety guards,, Electrical system with start/stop switch and emergency stop button., Safety side protection carters, Instructions manual, CE, electrical drawings., If you need anything different please give us the following details., HEIGHT - LENGTH - SCREEN HOLES - NUMBER OF SCREENS - CAPACITY in kg/h, Standard classifying surface is 1500×500 mm. (x 1.000 mm H) which covers most extruders up to 1300 kg./h, but you can have longer surfaces when a cooling action is needed, particularly for PVC, or for higher capacity extr ...