reach used for sale

KUKA robot KR45-2 Built in 2000 Reach of 2000mm weight 880kg load 45kg good condition KUKA control KRC1 weight 136kg software version V4. 1 7 Teachpendant KUKA KCP1 Connection cables 7 m / 15 m Or with KUKA control KRC2 weight 185kg software version V4. 1.7 Teachpendant KUKA KCP2 Connection cables 7 m / 15 m .

1 piece robot KUKA KR30-2 Built in 2000 Reach 2000mm weight 880kg load capacity 30kg control KRC1 or also KRC2 weight 136kg / 185kg software version V4. 1 7 Teachpendant KUKA KCP1/KCP2 Connection cables 7 m / 15 m .

Cobot collaborative robot Dobot CR10 new - with Safeskin Reach: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, gr ...

1 piece robot KUKA KR16-2 Mint Year 2011 reach 1611mm weight 235kg payload 16kg control KRC4 Weight 141kg Teachpendant KUKA touchpad KCP4 Connection cables 7 m .

Robot KUKA KR210 2 F Serie2000 Foundry Built in 2005 Reach 2700mm Weight 1267kg Load 210kg Control KRC2ed05 Weight 185kg Software version V5. 4.11 KUKA KCP2ed05 Connection cables 7 m / 15 m .

Cobot collaborative robot Dobot CR5 new - with Safeskin Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grind ...

KUKA robot KR240L180-2 Serie2000 Built in 2008 Reach 3100mm Weight 1267kg Payload 180kg Control KRC2ed05 (Daimler version) Built in 2005 Weight 185kg Software version V5. 4.11 KUKA KCP2ed05 Connecting cables 15 m .

KUKA KR360 built in 2004 Reach 2826mm Load 360kg Equity Wicht 2350 kg KUKA control VKRC2 (VW/Audi version) Weight 185kg Software V4. 1. 7SP08 (standard software) KUKA KCP2 KUKA set .

- Manufacturer: Jungheinrich - Type: ETV 214 - reach truck - Drive type: Electric - Load capacity: 1400kg - Lifting height: 5300 mm - Centre of gravity: 600 mm - Year of construction: 2008 - Operating hours: 15,224 -Battery from October 2019 Condition: fully functional, the truck has been inspected & maintained annually from food wholesale warehouse fleet. - Mast type: Triplex - Lifting height: 5300 mm - Fork length: 1150 mm - Height:2400mm - with load protection grille & side shift - also available as deep-freeze storage version. Incl. charger! Price net plus VAT Several identical devices different. Years of construction and operating hours available - just ask!

Lift trucks - counterweight forklifts - drawbar forklifts without battery to hobbyists pickers, also called "order pickers", are used for the sprinking of pallets in pure storage operation. The types LO2.0 M and LO2.0 are designed for the predominant access in the first level , the operator can also reach into the 2nd level with the help of the integrated ascent in the corner back. For the intensive picking in the first and second level, the type LO2.0 L was equipped with additional platform hub. With the foot switches in the ground for electric lifting and lowering, the operator has both sides free when picking. ; as is

Robots industrial robots KUKA KR200-2 comp Built in 2007 Reach 2400mm Weight 1267kg Load 200kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)

For sale is a used base plate with accessories. For sale only within Europe. Price factory Travenhorst. Foundation plate No.: 543688 80, 3x Holder 528729 02, 9x Screw Tel: 0049 45569819444 ---------------------------------------------------------------------- ------------- Our company: For many years now, we have been supporting national and international companies as a recovery plant for separators. In our new plant, Alfa Laval and Tetra Pak separators / centrifuges are generally overhauled at the highest level for our customers and converted on request.Our centerpiece, the test bench, is constantly being expanded in order to reach the highest performance of the various machines permanently and reliably. As a result, our customers profit from the modernized separators in terms of availability and costs. Benefit from our experience - benefit from our services!

For sale is a refurbished Mercedes OM-444 LA with the engine number 444.901-500-09-020982. The price for the replacement engine is €38,500 plus €25,000 used part deposit. The old part deposit will be refunded if you return your old, identical engine to us. The old engine may be inoperable, but not completely destroyed. Massive damage to the relevant components will be charged after a professional assessment. Are you looking for a different diesel engine? We offer new and replacement engines for many commercial vehicles as well as railway, industrial and agricultural engines with warranty. We sell used, new and refurbished diesel engines from numerous well-known manufacturers. A large number of motors are immediately available from stock. A cost-effective alternative to the new engine is the professional general overhaul of your engine. We can repair this with high quali ...

Robots industrial robots KUKA KUKA KR100-3 comp safe­robot KRC2ed05 Year 2011 Reach 2400mm Weight 1155kg Load 100kg Control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 4.14 Software safe­robot V1. 1.1 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m (several Creative Commons, orange)

Robots industrial robots Manufacturer: Kuka KUKA Type: KR210-2 Serie2000 Year 2011 Reach 2700mm Weight of 1430kg Load 210kg control KRC2ed05 Weight 185kg Processor 2 GHz WinXP language Software version V5. 6.6 Teachpendant KUKA KCP2ed05 Connection cables 7 m / 15 m

Technical data Drilling capacity approx. 100 mm Spindle mount Mt 6 Reach 3000 mm 21 spindle speeds 18-1800 rpm 18 feeds 0,0375 - 2 mm / Rev Column diameter 600 mm Weight approx. 15000 kg max. distance plate - spindle 2100 mm Prepared for container loading

Stock# UG6236 Little used vertical gap mill by Bauermeister (Germany) type GM 80.1 EX. Machine is driven by el motor 75 kW, 3000 rpm. Working output depends on product and can reach up to 800 kg/h. Maximal feed size up to 1.5 mm. Reported maximal output finess up to 200 microns. Mill has adjustable gap in range from 1 up to 5 mm and is equipped with ASIMA rotor working with speed up to 123 m/s. Milling elements designed in hardened steel. Mill has ATEX Ex II 1/2D T 100 C certificate. Shipping dimensions: L 2140 mm x W 1270 mm x H 1470 mm x W 1900 kg.

For sale is a refurbished Mercedes OM-444 LA with the engine number 444.901-500-017.537. The price for the replacement engine is €38,500 plus €25,000 used part deposit. The old part deposit will be refunded if you return your old, identical engine to us. The old engine may be inoperable, but not completely destroyed. Massive damage to the relevant components will be charged after a professional assessment. Are you looking for a different diesel engine? We offer new and replacement engines for many commercial vehicles as well as railway, industrial and agricultural engines with warranty. We sell used, new and refurbished diesel engines from numerous well-known manufacturers. A large number of motors are immediately available from stock. A cost-effective alternative to the new engine is the professional general overhaul of your engine. We can repair this with high quality ...

Robot Industrial Robots KUKA Kuka KR60-3 F Foundry Built in 2006 Reach 2033 mm Weight 665 kg Payload 60 kg Kuka Control KRC2ed05 Weight 185 kg Processor 2GHz Language WinXP Software status V5.6.8 Kuka Teachpendant KCP2ed05 Kuka interconnectors 7 m / 15 m repainted

For sale is a refurbished Mercedes OM-444 LA with the engine number 444.901-500-018.101. The price for the replacement engine is €38,500 plus €25,000 used part deposit. The old part deposit will be refunded if you return your old, identical engine to us. The old engine may be inoperable, but not completely destroyed. Massive damage to the relevant components will be charged after a professional assessment. Are you looking for a different diesel engine? We offer new and replacement engines for many commercial vehicles as well as railway, industrial and agricultural engines with warranty. We sell used, new and refurbished diesel engines from numerous well-known manufacturers. A large number of motors are immediately available from stock. A cost-effective alternative to the new engine is the professional general overhaul of your engine. We can repair this with high quality ...

Robot Industrial Robots KUKA Kuka KR60-3 Built in 2005 Reach 2033 mm Weight 665 kg Payload 60 kg Kuka Control KRC2 Weight 185 kg Processor 733MHz Language Win95 Software status V4.1.7 SP08 Kuka Teachpendant KCP2 Kuka interconnectors 7 m / 15 m (repainted) Can also be offered with a KRC2ed05 controller Kuka Control KRC2ed05 Weight 185 kg Processor 2GHz Language WinXP Software status V5.6.6

For sale is a new Mercedes OM-444 LA with the engine number 444.901-500-500.557. The price for the replacement engine is €38,500 plus €25,000 used part deposit. The old part deposit will be refunded if you return your old, identical engine to us. The old engine may be inoperable, but not completely destroyed. Massive damage to the relevant components will be charged after a professional assessment. Are you looking for a different diesel engine? We offer new and replacement engines for many commercial vehicles as well as railway, industrial and agricultural engines with warranty. We sell used, new and refurbished diesel engines from numerous well-known manufacturers. A large number of motors are immediately available from stock. A cost-effective alternative to the new engine is the professional general overhaul of your engine. We can repair this with high quality accordi ...

Carrier Doka H20 Top P The carriers are manufactured by Doka 8.415m - available lengths: 2.45m 2.65m 2.90m 3.90m € 3.85 per meter Formwork carriers as a well-used com-po nen ten for vie-le-relungs-sys-me. Formwork carriers are available as ba sis vie'ler Scha-lungs-sys-te-me and uni-ver-sell. The carefully used carriers are suitable for the years of the construction. The location is our warehouse in 5202 Neumarkt For further information or a visit I am at your disposal at any time. You can reach us at Tel.Nr: +43 664 1296830 or by e-mail: office@berger-international.at Berger Construction Equipment Ltd.

Vacuum system with 3 vacuumpumps, max. 450m³/h, VB.MM 0140-A3-1, Busch, used tested Condition! The central vacuum system is in very good condition. We have tested all 3 vacuum pumps. The pumps run smoothly and reach an absolute vacuum of 60mbar (i.e. -940mbar). I would be happy to send you the videos of the pump tests. Central vacuum system consisting of: - 1 piece Busch rotary lobe vacuum pump MM 1142 B V03, 140 - 175m³/h - 2 pieces Busch rotary lobe vacuum pumps MM 1142 AV, 140m³/h - 1 piece Busch vacuum container VB 100 AV - 1 piece Busch control and switch cabinet Triplex 3.0 - 1 piece Busch standing filter STAVI-250 - Documentation, setting table, circuit diagram, service and maintenance manual. The Endress and Hauser RIA 450 process indicators display and monitor analog measured values. The pump control ensures that the vacuum requirement is maintained and th ...

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

Kuka Robot KR6 R700 sixx, Mobile SZ AGILUS V2 Year of construction: 2016 Reach: 706 mm Weight: 50 kg Payload: 6 kg Kuka KRC4 compact controller KUKA. SystemSoftware KSS SR 8.2 Kuka SmartPAD 1.0 Kuka connecting cable 7m Dimensions 900 x 1200 x 1850mm Weight 295kg Ideal for training or trade fair

pressure: 100 t distance between columns: 1500 mm stroke: 380 mm working feed: 2,47 mm/sec : 700 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 1740 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 1396 mm total power requirement: 2,2 kW weight of the machine ca.: 2060 kg dimensions of the machine ca.: 1,74 x 2,07 x 2,04 m This 100 ton straightening press has a manually movable portal and is exclusively made in the Netherlands. Thanks to the movable portal and cylinder you can easily reach every point of the ‘to be pressed’ surface. The design of this portal press makes it possible to place heavy material on the large working table with a crane and to slide the portal over the material when the pressing starts. The quality of these hydraulic straightening presses is very high. Furthermore, the hydraulic unit is equ ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used fine impact mill Hosokawa Alpine Contraplex CW 400 pin mill. The Contraplex pin mill is fitted with two contrarotating pin discs achieving high relative speeds, allowing it to reach finer end products than our traditional universal mill type UPZ. This grinder is suitable to comminute many different products for all kind of industries, like chemicals, food, pharma, etc. Material ...

: 50 mm roll diameter: 148 mm : 13,6-27,2 Upm engine output: 2,2 kW turning speed range - power take off spindle: 13 U/min dimensions of the machine ca.: 750 x 1450 x 800 mm Features: 2 rollers powered settings readout on scale easy reach emergency button supplied with standard roller set optional: various roller sets (available on request) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZTS KOSICE LEK 160 eccentric press was built in 1985 in Czechoslovakia. The press, operating with a force of 160 tonnes and a slider making up to 50 strokes per minute, is designed for, e.g. punching, cutting and pressing of workpieces. Machining is performed on a large work table with a length of 1000 mm and a width of 740 mm, with full illumination in the form of a lamp mounted on the body of the KOSICE LEK 160 machine. The total weight of the machine is 12180 kg. Technical data of the ZTS KOSICE LEK 160 press - maximum press force: 160 t (1600 kN) - work space dimensions (L x W): 1000 x 740 mm - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 32/min - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider adjustment range: 100 mm - reach: 355 mm - workspace illumination - weight of the KOSICE LEK-160 machine: 12180 kg

turning speeds: 400 U/min working range: 500 - 1600 mm thread: M3 - M 12 collets: 6 weight of the machine ca.: 20 kg The AT II series pneumatic tapping machines have a radius of up to 1600 mm. The construction of the machines enables you to reach the workpiece quickly. Easily mounted on a work surface. For professional use. Accessories: M3-M12 supplied with reducer/lubrication set including tapping adapters (6 pcs) including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The RE100 tempering oven is a product manufactured in the former GDR and dates back to 1982. It has a rated output of 18 kW and can reach a maximum temperature of 300 degrees Celsius. The furnace type RE100 is particularly robust and suitable for various industrial applications where high temperatures are required. With dimensions of 1.8 meters in length, 1.3 meters in width and a height of 2.05 meters, the tempering furnace offers enough space for larger batches of material. Although the product has been around for several years, it is in good condition and functional. ---------------------------------------------------------------------- -------------------------------- The tempering furnace RE100 was manufactured in the former GDR in 1982. This furnace type has a rated power of 18 kW and a maximum operating temperature of 300 degrees Celsius. With exterior dimensions of 1.8 mete ...

28 fields pallet rack with 2 truss levels each - 29 stands / 112 trusses - Truss length 2.70 m - Load per level 2.4 tons - Shelf height: 3.50 m depth 1.10 m -Dismantled - all small parts (screws, locking pins, feet/floor plates etc.) new! Item location: Bavaria (Rosenheim area) / Germany / Hesse (Fulda area) / Germany / Tyrol /Austria Prior sale is reserved ______________________________________________________ Freight / Delivery Current non-binding estimated freight costs for the German federal territory amount to 450 euros. Delivery time up to approx. 4 weeks Shipping throughout Europe by arrangement and mail confirmation. Commercial customers from EU countries (Austria, Italy, etc.) with a corresponding VAT number (e.g. AT/IT) will each receive a net invoice. Assembly On request, we will also be happy to make you an offer for the assembly. Contact  ...

The KR QUANTEC series, the best-selling robot series from KUKA, is characterized by being sturdy, powerful, sleek, and flexible . A top performer in its class, the KR 210 R2700 prime industrial robot from the KR QUANTEC prime product family has an ideal payload capacity and a long reach. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KR210 R2700 prime Condition: Refurbished with 1 year of warranty Year: 2013 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: The Base and gripper As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

The RE100 tempering oven is a product manufactured in the former GDR and dates back to 1982. It has a rated output of 18 kW and can reach a maximum temperature of 300 degrees Celsius. The furnace type RE100 is particularly robust and suitable for various industrial applications where high temperatures are required. With external dimensions of 1.8 meters in length, 1.3 meters in width and a height of 2.05 meters (internal dimensions 1x1x1.3m), the tempering furnace offers enough space for larger material batches. Although the product has been around for several years, it is in good condition and functional. ---------------------------------------------------------------------- -------------------------------- The tempering furnace RE100 was manufactured in the former GDR in 1982. This furnace type has a rated power of 18 kW and a maximum operating temperature of 300 degrees Celsius. ...

Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer a Mitsubishi Industry 6-axis articulated arm robot. RV Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV series offers a highly dynamic 6-axis articulated robot for the highest level of quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

FANUC M6IB 6S (year 2006) Available: (1) M16IB + FANUC SYSTEM R J3IB Controller + console (1) M16IB + FANUC SYSTEM R J3IB Controller The FANUC M-6iB/6S is a short arm for tight, confined spaces. The robotic arm of the M6iB/6S RJ3iC is used to treat products where parts sizes and envelopes are of little concern. The M 6iB/6S can perform acute, lightweight material handling with a repeatability of +/- 0.08 mm and a maximum payload capacity of 6 kilograms. Robot Specifications Axes: 6 Reach: 900mm Repeatability: ±0.08mm Robot Motion Speed J1 - 200 °/s (3,49 rad/s) J2 - 200 °/s (3,49 rad/s) J3 - 260 °/s (4,54 rad/s) J4 - 400 °/s (6,98 rad/s) J5 - 400 °/s (6,98 rad/s) J6 - 720 °/s (12,57 rad/s) Robot Motion Range J1 ±170° J2 ±125° J3 ±155° J4 ±190° J5 ±140° J6 ±360°

Adjusting height maximum: 6000 mm Boom arm reach: 3000 mm SPECIFICATIONS Welding tower / boom height   6000 mm Arm length  3000 mm Number / Power source in AMP  1000 AMP

This pressure vessel has a generous volume of 1500 liters, which provides enough space for your requirements. The container is designed for a permissible operating pressure of 11 bar, which ensures safe handling and storage. In addition, it is suitable for a permissible operating temperature of up to 50 degrees Celsius, so that it also works reliably at higher temperatures. This pressure vessel was manufactured in 2000 and has therefore been in operation for some time. Nevertheless, it is in excellent condition and continues to meet the required safety standards. Contact us without hesitation for more information or to request a personalized quote. We are confident that we can offer you the best possible price and are open to negotiations. Do not hesitate to contact us so that we can find a solution together." I hope this description meets your requirements. If you need more  ...

Stock number UG6348 Used disc centrifuge by Alfa Laval model MAB 205. Bowl design - purifier. Machine is equipped with pump. Output depends on product and can reach 500 l/h. Machine in working condition. Renovation in 2016

The KUKA KPC4 industrial robot from 2014 is a high-quality and powerful solution for industrial applications. This robot provides precise and reliable movements to perform various tasks in manufacturing or automation. The robot is in very good condition and has been carefully maintained. For further information on technical details and properties, please refer to the attached images. There you will find all relevant information, such as working range, load capacity and other specific features. If you would like more information about this industrial robot or have specific questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. We are confident that we can come to an agreement on the price. Please do not hesitate to contact us for more information and possible negotiations. Please note that additional details an ...

ERMAK HAP 2600 X 80 CNC hydraulic press brake was manufactured in 2005 by the Turkish company ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine characterised by high performance and robustness, performs precision bending of workpieces with a maximum length of 2600 mm and a thickness of 6 mm with a force of 80 tonnes. The machining parameters in the X and R axes are programmed easily and conveniently through the CYBELEC DNC 60 CNC controller located on a mobile arm. The HAP 2600-80 press brake also offers a high level of operator safety, thanks to an emergency button and light curtains made by FIESSLER ELEKTRONIK to prevent unauthorised entry into the machine’s working area. The total weight of the press brake is 5600 kg. Technical specifications of the ERMAK HAP 2600 X 80 CNC press brake - press force: 80 t (800 kN) - feed in X/R axis: 500/160 mm - maximum sheet metal length: ...

Welding robot make KUKA type KR 6 ARCYear of construction 2008Technical specifications:Load capacity 6.0 kgNumber of axles 6Repeatability +-0.1mmMax Reach 1823.5mmWeight around 235 KGWith- Control KR C2used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

LXSHOW LXW 2000 W FIBER laser cleaner manufactured by Chinese manufacturer LXSHOW Jinan Lingxiu Laser Equipment Co., Ltd. in 2022, is a widely used industrial device designed to remove e.g. rust, paint, oil and oxide layers from the surface of workpieces. The use of the laser cleaner guarantees the removal of contaminants without any damage to the surface and achieves exceptional cleanliness, impossible to achieve with conventional workpiece cleaning. Laser cleaning is performed without the use of chemicals or cleaning solutions, making the fiber laser cleaner environmentally friendly. At the end of the process, the waste takes the form of a solid powder, easy to store and recycle. The LXSHOW fiber laser offered together with the reliable 2 kW RAYCUS RFL-C2000 generator ensures long-lasting, uninterrupted and highly efficient performance at a low cost of operation. The LXSHOW LXW20 ...

Dobot collaborative robot Cobot CR12 - new Reach 1200mm Payload 12kg Axes 6 Collaborative robot series CR12 Cobot Improves Product Quality: The DOBOT CR12 series is equipped with interactive programming, convenient and easy to master. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also because of its universal communication interfaces. With multiple I/O ...

Dobot collaborative robot Cobot CR12 with SafeSkin- new Reach 1200mm Payload 12kg Axes 6 Collaborative robot series CR12 Cobot Improves Product Quality: The DOBOT CR12 series is equipped with interactive programming, convenient and easy to master. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also because of its universal communication interfaces. With ...

Dobot collaborative robot Cobot CR5 - new Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing Mu ...

Dobot collaborative robot Cobot CR7 - new Collaborative robot series Payload 7kg Reach: 800mm Axes 6 The CR7 robotic arm is an automation solution designed for industrial and educational purposes. DOBOT's CR7 series can be adapted to various applications and is easy to use and quick to perform. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also becau ...

Stock number: UG6347 Used stainless steel conical mill by Frewitt (CH) model TC-150. Machine is driven by el motor with power 4 kW. Mill works with adjustable rotation in range from 500 up to 3800 rpm. Reported output depends on product and mesh of screen and can reach from 250 up to 600 kg/h. Machine is equipped with conical sieves with mesh 0.5 mm, 0.7 mm and 1 mm. Includes technical documentation.

Dobot collaborative robot Cobot CR7 with SafeSkin - new Collaborative robot series Payload 7kg Reach: 800mm Axes 6 The CR7 robotic arm is an automation solution designed for industrial and educational purposes. DOBOT's CR7 series can be adapted to various applications and is easy to use and quick to perform. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools,  ...