reach used for sale

Lifting height: 10,700mm, load: 1.4t, weight: 2.12t.

Description: serial no. 91016810 drive electric 48 Volt operating hours according to counter 11.513 overall height 2400 mm lifting height 5600 mm Vulcolan tires battery 48 Volt charger 48 Volt fork length 1150 mm Approx. Onsite Dimension. (l x w x h): 2,600 x 1,150 x 2,400 mm, weight approx.: 2,800 kg

Description: Load capacity 1,400 kg Serial no. 91090213 Electric 48 volt drive Operating hours according to counter 6,967 Overall height 2800 mm Lifting height 6800 mm Vulcolan tires Battery 48 Volt Fork length 1200 mm - 2000 mm Sideshift Fork adjustment Hydraulic fork extension Approx. Onsite Dimension. (l x w x h): 1,300 x 2,800 x 2,500 mm, weight approx.: 3,500 kg

Description: Lifting height: 3000 mm Lifting capacity: 1250 kg Fork length: approx. 1100 mm Operating hours read off: 8440 Incl. charger Approx. Onsite Dimension. (l x w x h): 2,100 x 1,200 x 2,100 mm, weight approx.: 1,500 kg

Description: 2 Ton lifting capacity fork length 900 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,900 x 2,500 mm, weight approx.: 2,000 kg

Description: Jungheinrich ETV216 sliding column forklift  , Max. lifting height: 9920mm Max. lifting capacity: ,1600kg Travelling speed: 14km/h  , Serial number 91087832 Year of production 2013  , Other main features: Continuously serviced! With valid inspections, , 2 batteries + charger. has fork camera and leveling function.  , Keyboard and monitor shown in picture not included. loading capacity: 1,6 to, lifting height: 9,920 mm, battery and charger available: yes, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,270 x 2,200 mm, weight approx.: 3,000 kg, charging voltage: 48

TECNA 4608N spot welding machine which was built in 2008 in Italy is used for precision welding of two sheets of steel or aluminium with a maximum thickness of 4 mm each. During the machining process, the electrodes heat the workpieces until they reach a plastic state in order to become one inseparable piece after cooling. The adjustment of arm reach and electrode stroke enables adaptation of the machine to the user’s individual production requirements. The 4608N resistance welding machine is equipped with a state-of-the-art TECNA TE90 Mark II microprocessor controller, designed to ensure a smooth and uninterrupted welding process. The control system enables the programming of 12 different process parameters and control of the SCR thyristor, responsible for regulating the welding current. The offered TECNA spot and projection welding machine also comes with, among others, a set of e ...

YASKAWA MOTOMAN GP35L industrial robot was built in Japan in 2021. This compact machine with an extremely robust body and extended reach is ideal for a wide range of applications i.e. load handling, machine operation and grinding/polishing. Thanks to its compact size and weight, it can be installed in hard-to-reach areas in a small amount of space, reducing at the same time interference with peripheral equipment. The YASKAWA robot is additionally equipped with a MOTOMAN YRC1000 controller with the ability to use extended commands and create advanced motion functions. The offered GP35L robot is brand new and has never been used. The total weight of the machine is 600 kg. Technical specifications of the YASKAWA MOTOMAN GP35L robot - number of axes: 6 - arm reach: 2538 mm - maximum payload: 35 kg - axis motion range S axis: ± 180° L axis: +135°/-90° U axis: +206°/-80° R axi ...

KUKA KR16 L6 ARC-C robotic welding machine together with the PO-2t6m-01 rotary positioner was commissioned in 2017 and its purpose was to very precisely weld gates and fence spans, but it can also weld various types of structures that fit within the range of the rotary positioner. The welding station includes a robotic arm built in 2009, which was previously only used for testing. The whole thing has only worked for 50 hours. The KUKA KR 16 L6 ARC-C robotic welding system is equipped with: – welding robot: KUKA KR16 L6 ARC-C – controller: KUKA KR C2 – rotary manipulator: PO-2t6m-01 – current power source: FRONIUS TransPuls Synergic 4000 CMT R – software: KUKA System Software (KKS) – torch cleaning device: TBi BRG-2-ES-DAE – wire feeder: FRONIUS ROBACTA DRIVE CMT – track The rail-moving KUKA KR16 ARC industrial robot with a reach of 6 m allows excellent preci ...

Description: • Telehandler • Spanish registration number: E 9267 BHD • Serial number JCB5XK2GJK2790857 • Maximum load capacity 3200kg • Maximum lifting height 7000 mm • Maximum front reach 3720 mm • Load capacity at maximum height 2750 kg • Load capacity at maximum reach 1675 kg • Reach with 1000 kg load: 3720 mm • With bucket with useful dimensions approx. 2260 x 1200 x 1000mm • JCB EcoMax engine, power 81 KW • IMPORTANT: • The buyer is responsible for everything related to the loading of this equipment • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 6,380 x 2,360 x 2,500 mm, weight approx.: 7,600 kg

1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to absorb the technology and the Enclosure of the approximately 7 m high powders Loading technology with flow vessel and powder delivery Technology through a Safeline metal detector in the truck filler neck. with rope glide staircase to reach Floor 1 and Floor 2 with complete steel construction for Wall and roof construction 1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to accommodate the technology and the Enclosure of the approximately 7 m high powder Loading technology with feed vessel and powder dispenser Technology through a safeline metal detector in the truck filler neck. with a stairway to reach it Floor 1 and Floor 2 with entire steel construction for Wall and roof construction

Universal crimping system for tank bottoms or container bottoms of all kindsFabr. ECKOLD type BA 75, year of construction 1976Max. Floor size: 4000 x 4000 mmMax. Material thickness aluminum: 5.0 mm: Steel: 4.0 mm: VA: 3.0 mmHorizontal reach: 2150 mmVertical projection: 1320 mmhydr. Cylinder stroke: 1000 mmMax. Pressure: 110 barMax. Compressive force: 55 kNDrive power: 7.5 kWOutside dimensions approx: 3030 x 1030 x 1410 mmWith- Swiveling extension arm 0 - 200 °- built-in hydraulic cylinder- Flare shape receiving head- turntable- Hydraulic unit- pneum. Lifting and balancing device (Conco-Balancier)- mobile crimping device and pressure tongs type B 75 - 50xa0xa0 Worker 7.5 Mpxa0xa0 Pressure 490 barxa0xa0 Horizontal reach 150 mmxa0xa0 Projection vertical 230 mmxa0xa0 Weight approx. 45 kgThe universal flaring system is suitable for flanging all common tank or container bottoms in round, oval ...

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

Long reach - flail mower for rear three point attachment, cutter head 125 cm with hammers (380 g) and bottom roller. Bowden cable control, own hydraulic system, drive via PTO 540 RPM. Range horizontal 507 cm from tractor centerline, vertically to 500 cm, tractor weight minimum 2100 kg; min. 37 kw/50 hp required (factory specifications). Other smaller long-reach flail mowers and mower technology on stock!

Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance perfect as a supplement to large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus all-plastic sheet. • Handle profile on all elements • Snap edge on the large elements • Element widths up to 90 cm Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance, perfect as additional large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus solid plastic panel. • Handle profile on all elements • Knuckle edge on the large elements • Element widths up to 90 cm

FANUC S-420iW industrial robot was manufactured in Japan in 1996. A handling robot characterised by maximum performance and reliability has many applications in the industrial sector. The arm with a long reach of 2850 mm and a load capacity of 155 kg, together with 6 axes equipped with mechanical brakes, will meet even the most demanding challenges. The S-420i W robot has an integrated FANUC R-J2 controller, which uses advanced technology to improve and optimise overall productivity. The total weight of the machine is 1600 kg. Technical specifications of the FANUC S-420iW articulated robot - integrated controller: FANUC R-J2 - number of axes: 6 - arm reach: 2850 mm - payload: 155 kg - portable teach pendant: FANUC - motion range of robot axes J1 axis: 360° J2 axis: 142° J3 axis: 135° J4 axis: 600° J5 axis: 260° J6 axis: 720° - movement speed of robot axes J1 axis:  ...

Hydraulic lifting crane with two supporter feet, and a turntable Splited telescopic cranehand, without hydraulic power supply. Manufacturer: ATLAS Load Capacity: 2,0 t Horizontal Reach: 6,0 m Reach height: 5,0 m

Self-propelled telescopic boom lift 360° The JLG Toucan 1010 boom lift is equipped with a robust and easy-to-maintain electric motor. It allows 2 people to work at a height of 10.10 m or with a lateral reach of up to 3.12 m. High-quality components from well-known manufacturers guarantee a long service life and short-term spare parts procurement even after years. Its non-marking tyres make it ideal for indoor use on sensitive ground. This makes it ideal for maintenance and assembly work at heights. All functions can be controlled from the basket. The movement is possible in all positions, even at full height. The superstructure can be rotated so that lateral working areas can also be reached. Specifications: Brand: JLG Type: Toucan 1010 max. working height: 10.10 m max. platform height: 8.10 m Platform size (LxWxH): 0.9 x 0.7 x 1.1 m Stage load capacity: 200 kg  ...

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

Manitou 170 AETJL aerial work platform with 16.90 m working height The 170 AETJ-L aerial platform makes it easy to reach the most remote work areas. Equipped with an articulated structure, this model is characterized by an exceptional offset and overhang to be able to work at different heights and in different places without having to move the machine. Take advantage of the flexibility of its hydraulic movements for precise positioning in the work area! With its perforated platform floor, inclination detectors and load sensors, cylinder valves and negative braking system, the 170 AETJ-L aerial work platform allows you to carry out your work safely. This machine complies with: European Directives: 2006/42/EC - Machinery (recast EN 280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low Voltage) Make: Manitou Type: Articulated telescopic platform Type: 170 AETJ Year of construction: 20 ...

1x Jungheinrich reach truck, condition: fully functional, the truck was checked and serviced annually and repaired if necessary - from a food wholesale warehouse fleet with its own maintenance workshop. Incl. charger! Price gross incl. VAT! Shipping possible for an extra charge. - Manufacturer: Jungheinrich - Type: ETV 214 - Reach truck - Drive type: Electric - Load capacity: 1400kg - Lifting height: 5300 mm - Load centre of gravity: 600 mm - Fork length: 1150 mm - Height: 2300mm - Year of construction: 2014 - Hours: 13225 - Battery from 01/2020 - with full free lift, load protection grille & side shifter. Also available as a cold store version! Several identical devices with a lifting height of 5.3m are also available. Miscellaneous Years of construction and operating hours available - just inquire!

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Operating hours: 12800 h Switch-on hours: 6000 h Number of axis: 6 horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200-3 COMP Condition: USED Year: 2011 Reach in mm-2400 mm Payload-200 kg Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant Not Included: Externals on the manipulator, Gripper and the Base Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 L170-2 COMP Condition: Used and tested Year: 2007 Reach in mm-2600 mm Payload-170 kg Controller: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant Not Included in the Price: 7th Axis and 7th Drive but can be offered with extra pricing, engineering consultancy, VAT, Shipment and custom duties As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your production need

Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200 COMP Condition: USED Year: 2005 (Multiple options available) Reach in mm-2800 mm Payload-200 kg Included: Manipulator and Wire Sets NOT included: Externals attached to the manipulator + KRC2 Control Cabinet + Teach Pendant (We can try to find these items for you which are not included in the price) Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs.

Powered by a reliable FRONIUS TransPuls Synergic 4000 power source, the robotic welding station enables efficient MIG/MAG welding in all positions and ensures low operating costs. The industrial robot located in the welding cell, thanks to its high repeatability of positioning and stability, is able to guarantee the highest quality and precision of welding. A robust body with a 1500 mm reach arm, combined with six high-speed axes, contributes to a significant reduction in production cycles. The welding cell consists of: industrial robot: REIS RV 10-6 RSV, FRONIUS TransPuls Synergic 4000 welding source with a capacity of 400 A (50%), 365 A (60%), 320 A (100%), SRM 100 rotary table with a lifting capacity of 100 kg and dimensions of 1200 x 750 mm each, cooler, control cabinet, user manual in Polish and German. Technical Specifications: number of axles: 6 arm reach: 1500 mm maximum lo ...

Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.

We are an authorized SUBARU dealer in Poland, In addition, we have over 30 years of experience in the trade of cars, trucks and specialized equipment. Please visit our official sites to confirm our authenticity! gruchel.subaru.pl / mgc.pl / facebook.com/p/MGC-Auto-Centrum-Subaru-100063910875053/ = \ For sale directly from the port of Sweden Varberg, we offer a powerful Svetruck TMF 12/9 forklift truck with an unladen weight of 50 Tons and a maximum load capacity of 12t lifted up to 7.5 meters. Forklift / Reach stacker from new to one owner in the Port dealing with unloading and loading of wooden logs on ships. The price includes dismantling the stroller into parts to prepare it for transport. (Gripper separately, arm separately, carriage separate) - - We also purchased an interchangeable arm from ELME from 2004, thanks to which this trolley can be converted into a Reach  ...

FANUC Arc Mate 100iC robotic welding machine manufactured in 2014, is designed for welding workpieces with even the most complex shapes. The FANUC robotic welding system is equipped with: – robotic arm: FANUC Arc Mate 100iC (2 units) – 3-axis manipulator: PEHh-3-450 – controller: FANUC SYSTEM R-30iB – welding source: LINCOLN ELECTRIC Power Wave S350 (2 units) – light curtains – liquid-cooled welding torch: ABICOR BINZEL ABIROB W500 (2 pcs.) – torch cleaning device: ABICOR BINZEL BRS-CC – wire feeder: LINCOLN ELECTRIC 4R100 (2 pcs.) – wire reel cassette with clamping system (2 pcs.) – operator’s panel – water cooler: LINCOLN ELECTRIC COOLARC-50 (2 pcs.) – control cabinet – attaching fixtures (2 pcs.) – strain relief hanger and cable relief (2 pcs.) – covers with service door and lock with safety switch – platform (2 pcs.) In order to ...

KAWASAKI 3RS050N-BC02 palletizing robot built in 2018, is designed to increase the productivity of production lines in many industries by automating the process of palletising products. This 6-axis packaging robot features a compact design with a sturdy arm and a long reach, guaranteeing fast handling of goods weighing a maximum of 50 kg. The total weight of the machine is 555 kg. Technical specifications of the KAWASAKI 3RS050N-BC02 industrial robot - number of axes: 6 - arm reach: 2100 mm - maximum payload: 50 kg - axis movement range JT1 axis: ± 180° JT2 axis: + 140° / -105° JT3 axis: + 135° / -155° JT4 axis: ± 360° JT5 axis: ± 145° JT6 axis: ± 360° - axis motion speed JT1 axis: 180°/s JT2 axis: 180°/s JT3 axis: 185°/s JT4 axis: 260°/s JT5 axis: 260°/s JT6 axis: 360°/s - repeatability: ± 0.06 mm - mounting: floor, ceiling - power requirement:  ...

COMAU SMART 5 PAL 260-3.1 palletizing robot built in 2016, has been specifically designed and configured to increase the productivity of production lines in industries where speed and high precision are required. The use of the machine in the factory allows to fully automate the process of palletising products while maintaining high productivity, optimisation of the process and short cycle times. The packaging robot has a robust arm with 4 dynamic axes with a long reach, allowing it to handle goods with a maximum weight of 260 kg. The COMAU PAL-260-3.1 industrial robot weighs 1250 kg. Technical specifications of the COMAU SMART 5 PAL 260-3.1 robot - number of axes: 4 - arm reach: 3100 mm - maximum payload: 260 kg - additional forearm capacity: 50 kg - axis movement range axis 1: ± 180° axis 2: -49° / +95° axis 3: -68° / -208° axis 6: ± 2700° - axis motion speed axis ...

Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach radius: 3.2m Handling Weight: 130kg Year of construction: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator. Palletizing robot for cartons Manufacturer: ABB Type: IRB 6640-130/3.2 / IRB 6640 M2004 Reach Radius: 3.2m Handling weight: 130kg Year of manufacture: 2010 Incl. tool for palletizing cartons by means of vacuum. Without vacuum generator.

CONTROLS   CNC controls YASKAWA DX200 4-axis palletizing robot as good as new, never in use Payload 500 kg Up to 1200 cycles/hour Vertical reach 3024 mm Horizontal reach 3159 mm Weight 2300 kg 2 units available

Robot Kuka KR200-2 construction year 2000 reach 2400 mms weight 1125 kg load 200 kg control KRC1 with 7-th axis in the construction cupboard weight 136 kg software state V2.3.24 Kuka KCP1 connecting pipelines 7 m .

Robot Kuka KR210L180 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180 series in 2000 construction year 2001 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR150L110 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 110 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

Robot Kuka KR30-2 construction year 2002 reach 2000 mms weight 867 kg load 30 kg ontrol KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 / 15 m

We have for sale a number of used hydrocyclones from the German manufacturer AKW A+V. Condition: USED Type: RWS 105 Nominal Diameter mm: 50 mm Cut Size dT50,?m: 5-15 Pressure Loss,bar: 1,5 - 3.0 Capacity ,m3/h: 2,4 -7,6 - High pressure resistance, The best operating pressure is much higher than the like products, much easier to reach the better separating effect, good cost performance. - Each type of hydrocyclones has big amount of successful applications, it can ensure that every operating hydrocyclone has the balance feeds. - The involute design from Germany makes the AKW hydrocyclones having better effects of concentration and separation. - Extra long lifetime. - Standardized parts, it is very convenient to change the spare parts.

Robot Kuka KR6-2 construction year 2001 reach 1500 mms weight 220 kg load 6 kg control KRC1 weight 136 kg software state V2.3.24 Kuka KCP1 connecting pipelines 7 m .

Robot Kuka KR150 series in 2000 construction year 2006 reach 2700 mms weight 1245 kg load 150 kg control KRC2 ed05 weight 185 kg software state V5.3.6 Kuka KCP2 ed05 connecting pipelines 15 m .

Robot Kuka KR150L110 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 110 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180L130 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 130 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180L150 series in 2000 construction year 2002 reach 2900 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .