128,439 used machines on RESALE, but how to find them? Machine Search
8/4000mm, 14/5000mm Auction-ID: A1-43752-114
Relay module MORS 681.039.2 1 x relay TEC 1401831100 24 V DC spare part for Toyoda HES52 ! used ! Dimensions: 70 x 50 x 75 mm
Pressure regulator manually adjustable, ultrapure gas regulator DRUVA type: LMD-500-01 inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm
Pressure regulator hand-adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262-242H283 inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2260-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2262-242-009 inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2261-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm
Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM Type: 44-3262H283-001 Inlet pressure: max. 35 bar Outlet pressure: 0 - 7 bar stainless steel ! Mint ! Dimensions: 140 x 140 x 100 mm
Good day We hereby offer you a used cable rewinding system (cable rewinding system) with length measuring device, for picking and winding cables to other drum diameters. Manufacturer Jakub Thaler GmbH, Germany Type KU-07 PPS Type Meter ME01 Year of construction 2019 Operating hours only 3,550 hours Load capacity 10,000 kg Usable cable diameter 10 – 80 mm Measurement accuracy +/- 0.5% Min. drum diameter 500 mm Max. drum diameter 2,800 mm Max. drum width 1,750 mm Drive power 5.5 kW Flushing speed 1 – 85 m/min. Hint: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: Cable rewinding system with length measuring device Stratification trestle with length measuring device Cable Reel ...
Fire Brigade Rescue Kitz, Rescue Scissors, Spreader Condition see photos.
AMUTEC TCR S 1200, reel-to-reel pre-cut bags, Construction year 2003,, totally revisioned in 2024 by Constructors technicians, very well maintained
Hoshizaki HNC-120AE-L Sushi Display Case 120 cm Product Description The beautifully designed display cases keep the temperature and humidity at a constant level, unlike air circulation systems that dry out the sushi on display. As a result, the sushi stays fresh longer and the quality is visible at the highest level. The Hoshizaki display cases do not thaw so that no condensation drips onto the sushi on display. This always prevents contamination of the products. The included display grilles can be turned upside down to increase cooling performance. Manufacturer: Hoshizaki Model No.: HNC-120AE-L Sushi display case Width: 1200 mm Height: 280 mm Voltage: 220-240 Watts: 150 RRP 2900,-€ You can find more chest freezers in other sizes - new and used - in our shop! International shipping costs on request!
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control, radio transmitter -Manufacturer: Ikusi, radio remote control for crane remote control -Type: TM70/1.13 -Scope of delivery: as per pictures, plug/connection cable (without remote control). -Dimensions: 320/290/H110 mm -Weight: 2.9 kg
List of defects: Knocks on the right and left rear door Slight left and right front bump offset due to an impact at the front of the vehicle, slightly damaged grille New front panel Right rear side scratches Vehicle Passed the technical inspection 2 registration documents and partial digital follow-up at Renault The storage compartment is missing inside GPS and Bluetooth Auction-ID: A3-43369-35031
Retro Motorino Torino scooter. Classic style urban moped, ideal for daily use or as a light mobility vehicle. Key included. Mileage shown: approx. 790 km (not verified). Status: - Used - Untested operation - Possible signs of wear and tear Sold in the condition it is in. Pre-inspection is recommended. The lot includes only what is visible in the photographs. Keywords: retro scooter, urban moped, classic scooter, light motorcycle, urban vehicle, motorino scooter, motorino torino, vintage scooter, modern moped, city bike, classic style scooter, mobility vehicle, second hand scooter, light motorcycle, city scooter, automatic moped, black scooter, compact motorcycle, urban practical vehicle, scooter with key Auction-ID: A1-46312-4
\" Tool batches consisting of machine reamers, mainly HSS, in various diameters, lengths and designs. Included are cylindrical shafts and square drives, some of which are labeled (e.g. H7 / H8). • Tool type: machine reamers • Material: mainly HSS • Tolerances: partly marked H7 / H8 • Shaft shapes: cylindrical / square (mixed) • Manufacturer: mixed, including Garant • Condition: used, occasionally new • Quantity: larger number of pieces (unsorted) Weight: • Net weight total: approx. 17 kg \" Auction-ID: A7-46417-180
\"r lot of hand reamers and machine reamers for metal, tool and fixture construction. The batch consists of different designs, lengths and diameters, loose and partly still in original paper packaging. Included are straight and spiral grooved reamers, mainly made of HSS, with square or shaft mounting. • Types: • Hand reamers • Machine reamers • Versions: • Straight grooved • Spiral grooved • Material: • Predominantly HSS • Holder: • Square • Cylindrical shank • Diameter: • Mixed sizes (several mm gradations) • Packaging: • Loose • Cartons Weight • Net weight: 17 kg \" Auction-ID: A7-46417-185
\" Hardness comparison blocks (HRC) for the inspection, adjustment and control of hardness testers (Rockwell C). The blocks are individually marked and are each in protective packaging or cases. In some cases, calibration certificates / certificates are included (e.g. MPA NRW, DKD / UKAS). Item: Hardness Reference Blocks / Hardness Test Reference Blocks Hardness Scale: Rockwell C (HRC) Quantity: 3 pieces Condition: used, very good condition Certificates: available (MPA NRW / DKD / UKAS, see documents & photos) Hardness values of the individual blocks: • 60.86 HRC • 61.4 HRC • 60.24 HRC \" Auction-ID: A7-46417-232
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control, radio remote control, radio transmitter -Manufacturer: ABUS, radio remote control with transmitter and receiver for crane remote control -Type: ABURemote AR611 -Scope of delivery: as shown in the pictures, plug/connection cable (without remote control). -Dimensions: 570/510/H180 mm -Weight: 5.5 kg
Tank comes from Linde H30T model 392, suitable for every model 391, 392 and 393 from Linde. Loading onto trucks no problem Auction-ID: A1-45451-1021
Vision Optics EVS Maxport Mobile Reading Aid Screen Reader Reader Auction-ID: A7-46327-68
0,6m3 / approx. 30 pieces / Superior Quality Red Alder American Superior Planed Goods / boards edged on 4 sides / Red Alder / 2.50m long / max width board 27cm / thickness board 40mm / dry air-dried Auction-ID: A1-46501-1538
Unaudited Auction-ID: A7-46327-256
0.72 m3 Auction-ID: A1-46501-3010
automatic air hose reel 15 meters and an automatic cable reel 15 meters. unused Auction-ID: A1-40418-244
automatic air hose reel 15 meters and an automatic cable reel 15 meters. unused Auction-ID: A1-40418-149
SCHNELL SHEAR LINE 300 rebar cutting and bending line was built in 2008 in Italy by Schnell S.p.a. The electrical installation was overhauled in 2024. The SCHNELL SHEAR LINE 300 is a reliable system designed for serial machining of rebar with a maximum diameter of 50 mm. It integrates all the necessary equipment that is responsible for cutting, bending, optimising, storing and handling bars. The entire production cycle, from feeding to the collection of the finished parts, is performed fully automatically. The SCHNELL SL 300 stirrup production machine is fully complete and consists of the following components: – control console – FA/6/14 storage rack for steel – SCHNELL CGS 300 HDY guillotine shears – SCHNELL VBM 12/2 measuring and cutting track with single-sided unloading – SCHNELL ROBOMASTER 45 automatic rebar bending machine – rebar storage and retrieval system ...
Replacement blades for cutting machines -Knife size: 127x25.4x1.1mm -Urschel: 46097 -Number: 33x available -Price: per piece -Weight: 25 g/piece
Replacement blades for cutting machines -Manufacturer: Stumabo -Blade size: 127x25.4x1.5 2GØ10.4 (90°) -Quantity: 25x available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 25 g
Replacement blades for cutting machines -Knife size: 205x125x1.47 -Type: 676 FB99262 -Number: 18x available -Price: per piece
Replacement blades for cutting machines -Knife size: 205x63x1.47 -Type: 675 FB99261 -Number: 5x available -Price: per piece
Replacement blades for cutting machines -Brand: Stumabo -Blade size: 190x50x5 mm -Type: 2114662 -Number: 162x available -Price: per piece -Minimum order: 3 pieces -Dimensions: 190/50/H5 mm -Weight: 0.27 kg
used, technically overhauled cutting machine Peddinghaus Simplex 60 H Hydraulic hold-down. The cut is triggered by a footswitch with emergency stop function. The shears are electro-hydraulically driven. Connected load 11KW 400V/32A Max. cutting capacity 3 bars 28mm diameter reinforcing steel.
Used, technically overhauled reinforcing steel shears. Footswitch with emergency stop function. Hydraulic counter holder Cutting capacity max.1 rod 45mm D. Power 11 KW.
The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...
Universal cutting machine with circular knife, d 250 mm
Kitchen slicer, crooked, type KSSM-V 1.4 D
Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool ...
used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,
Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50Identical to CEBORA ash. No. 244311 Year of construction approx. 1992Power 50 Amp. = 35 % ED 30 Amp. = 100 % EDEsetting range 2 stagesHose package length approx. 6 metersCompressed air connection 4.7 barMains connection 400 Volt, 50 Hz, 32 Amp. PlugSpace required L x W x H 500 x 350 x 700 mmWeight approx. 80 kgGood condition; used
Plasma cutting machine CLOOS type CPS 40/80Year of construction 1990Power at 60 % ED 80 Amp.Power at 100 % ED 40 Amp.Adjustment range 40 and 80 Amperes (2 steps)Cutting capacity for steel max. 25 mmHose package length 5.5 metersMains connection 400 Volt with 32 Amp. Plug and hand torch CLOOndimension L x W x H 700 x 600 x 750 mmWeight 160 kgGood condition; used
CNC flame cutting machine BACH type ACW 2500Flame cutting machine with CNC control NBS 400Masch. No. 14 561-06 Year of manufacture 2006Cutting area 2500 x 6500 mmRaceway length 8000 mmTrack width 3345 mmHeight of the raceway 650 mm2x Machine cutting torchwith burning table; used
Plasma Cutting Machine, Plasma Cutting Machine MESSER GRIESSHEIM Type Plasmastar HA 95Fabr. No. 4040 Year of construction 1990Power 95 Amp. - 60% ED 45 Amp. - 70 % EDEsetting range 2 stepsCutting capacity 25 mm (clean cut)Separating cut max. 45 mmHand torch PHC 95/140Power connection 380 volts, 50 Hz, 32 Amp. Plug- Water-cooled- 8 meters hose package length- Operating instructionsSpace required L x W x H 900 x 480 x 850 mmWeight 160 kgvery good condition; used
maximum number of results exceeded
please refine your search
60 € 
