rd used for sale

PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm

Diesel Generator 8kW 230V 50Hz Weight 530kg

ILLIG RDM70Kb Mold for PP Cups, Ø73 mm 32 Cavities, complete with Stacker Basket with Rods & Brushes & Rake, age May, 1997., Manufacturer: MARBACH

ILLIG RDM70K Mold, dia. Ø70 mm, for PP Cups, 21 Cavities, age 1995, with 1 set of inserts and Stacker basket with Rods with Brushes.

ILLIG RDM70K Mold for Ø75 mm dia. PS Cups, 21-Cavities, with 1 set of inserts, no Stacking Basket, age 1995. missing engraved Cup bottom discs, as these are the intellectual property of the previous owner. Very sparingly used !

Age 1990, refurbished in 2003 Consisting of : With auto-start facility Unwind Stand Indramat Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump Inline ILLIG UG70b Counter/ Stacker, with delivery conveyor Inline Grinder with Blower EXW our Warehouse Enger, Germany, max. mateerial width: 730 mm, max. Form Area: 680 x 280 mm, Infeed length: 300 mm, max. draw: 125 mm

Lid Mold Manufactured by TERMOSTAMPI to fit Drinking Cups Ø98 mm, Age 2022, Forming mold 24 cavities (6 x 4 arrangement), 2 sets of inserts for:, Dome Lid For Cup Ø9 8mm ., Flat Lid For Cup Ø 98mm, Hole Punch Mold - Punch and Die., 24 cavities to Punch 24 holes diam.25 mm on Dome Lid., 24 cavities to Punch 24 cross cut., Steel Rule Pucning Mold :, with 24 cavities for both Dome and Flat Lid., Stacking Device:, for Domes and Flat Lids

PET Coextrusion + Inline ILLIG RDKP72g Thermoforming Line, Age 2010, this equipment is suitable for PET, PP & PS Trays, Fruit & Vegetable baskets etc. :-, Inline S Plastic SRL PET Coextrusion line to produce pet sheet in-line with ILLIG RDKP72g 4-Station Thermoformer (.samplastco. hole punch station) Age 2010 :, Maximum output 680 kg/ hr, Maximum sheet width 800 mm, The line includes:, Electrical Control Panel, MSM Plastic Engineering Gravimetric Feeder, fed directly from the PET Dryer + additional Component for masterbatch or additive, Main extruder Model ED 100-40 dia. Ø100 mm, L/D 40, BP Plast BDO X2 100 Double plate hydraulic screen changer, MAAG Gear pump, Co-extruder Model E60-40 dia. Ø60 mm, L/D 40 with Gravimetric feeder, BP Plast Single plate hydraulic screen changer, MAAG Gear pump, 3- Layer (ABA) Melt Feed Adapter, Special extrusion die for PET, width 900 mm, 3-Roll Polished ...

ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts

Brake resistance SIEMENS, CGS RDL9141 900Vdc 400R ( RDL9141900Vdc400R ) 6SE3290-0DA87-2RA0 80 W 400 Ω Dimensions: 280 x 80 x 60 mm

Pneumatic Ratchet, Pneumatic Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD 3203 RD5 / 35 ( BALD3203RD5/35 ) Pmax: 6.3 bar Pmin: 4 bar Speed: 250 rpm Tool Holder: 3/8 New ! Dimension ( Air Ratchet ): 390 x 80 x 60 mm Dimension ( Packaging ): 520 x 110 x 90 mm

Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 piston Ø 125 mm stroke 200 mm Rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm

Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 25 S ( RDRKL25S ) 0.8 kVA Prim. 3 x 380 V sec. 24 V DC 25 A 50 - 60 Hz spare part for TRAUB TND300 ! used, tested, with downstream three-phase bridge rectifier ! Dimensions: 210 x 210 x 190 mm

Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 10 S ( RDRKL10S ) 0.34 kVA Prim. 3 x 380 V sec. 24 V DC 10 A 50 - 60 Hz spare part for TRAUB TND300 ! used, with downstream three-phase bridge rectifier ! Dimensions: 165 x 155 x 160 mm

Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKG 40 KM ( RDRKG40KM ) 1.2 kVA Prim. 3 x 230 / 400 - 480 V sec. 24 V DC 40 A 50 - 60 Hz with downstream three-phase bridge rectifier ! Dimensions: 285 x 230 x 210 mm

Brake resistance SIEMENS, CGS RDL9143 900Vdc 85R ( RDL9143900Vdc85R ) 6SE3290-0DC87-2RA0 400 W 90 Ω used, tested ! Dimensions: 400 x 105 x 70 mm

https://www.sony.at/electronics/support/home-video-dvd-players-recorde rs/rdr-at205/specifications Auction-ID: A7-45172-162

This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine.

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

Transformer Michael Riedel RDRK 30/36 Manufacturer: Michael Riedel Transformatorenbau GmbH Type: RDRK 30/36 Primary voltage: 3 × 380/400/420 V Secondary voltage: – 24 V DC (30.0 / 36.0 A) – 15 V DC stabilized (1.5 A) Frequency: 50/60 Hz Power: 0.74 / 0.88 kW Insulation class: IP00, 100% ED Dimensions: approx. 130 × 210 × 200 mm Weight: 10 kg Condition: used, dismantled from STAMA MC 325/S Price: on request / plus VAT

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

TEXTILE ROTARY PRINTING MACHINE; STORK RD4 MAKE : STORK TYPE : RD-IV NO.OF COLORS : 8 YOC : 1985 , RENEWED / MAJOR OVERHAUL 2008 WW : 1850 MM HEATING : STEAM WITH FLUFF REMOVER TYPE : STORK TYPE SU-II/1850 DRYER : 6 CHAMBERS

Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

3X Identical Steam Turbine sets Each steam turbine set is a complete system except the boiler for the steam generation. If sufficient water vapour is already available from another source, this can also be used. In this case, a boiler is no longer required. The three sets have never been run (like new), however, this sets are already more than 10 years old (year of production 2009). The project for which this sets were purchased has never been implemented. The steam turbine sets are running on 60 Hz. Depending on the country, where the steam turbine sets should be used, they may have to be converted to 50 Hz (replacing the gearbox and the clutch of the generator). This is possible and can be done by experienced companies. We can recommend a German company that has extensive experience in the errection and maintenance of this type of steam turbine. The unused steam turbine sets are pa ...

Transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Riedel, three-phase transformer -Type: RDRKL 16 -Power: 0.5 kVA -Primary: 3x380 V -Secondary: 24 V -Dimensions: 205/200/H140 mm -Weight: 8.9 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Riedel, three-phase transformer -Type: RDRK 25KM -Power: 0.63 kVA -Primary: 3x380-400-420V -Secondary: 24V DC -Dimensions: 190/190/H170 mm -Weight: 1.1 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

1 x Used ILLIG RDM70K PP-Mold for 8-Cavity, Rectangular Containers 145.5 x 65.3 x 41 mm age December 2007. Product drawing is attached.

ILLIG RDM75K Thermoformer age 1998, refurbished in 2019 with Siemens S5 PLC Controls, used only for ca. 50,000 hrs, Consisting of:, ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023., No Tooling or Format Parts are included with the Line., Max Stacking Area: 750 x 350 mm, Min dia. of product: Ø 40 mm, Max dia. of Product: Ø 150 mm, Total Dri ...

1 x Used ILLIG RDM70K PP-Mold, 5-Cavites, Strawberry Containers 174 x 103 x 90 mm, age December 2005. Product drawing is attached.

Refrigeration Compressor / Condenser Unit Second Hand Manufacturer: Franchill Ltd Model: SP3X45-RDM-FS 400V-1PH-50Hz Compressor / Heater Model: ZB45KCE-TFD 3 x 4.6kw For more information and more available stock please visit us at - advancedbrewing.co.uk

Used Illig RDM 37/ 10 with top heater, No Sheet Sag Control, Heater moved forward manually, Auto-unwind stand, mechanical indexing, Auto start mechanism, Pneumatic Plug assist, Form Area 475 x 250 mm, Max. Film width 495 mm, Max. Draw 100 mm, Age 1975, basic Machine, in production Condition, Please make an offer !

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m WEILER Bundle - RDU - LZ 330 - 2 x Commodor - UD 24 - DZ 67 V3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Total weight: 584 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Stöber type RD11-1003 -Motor manufacturer: ABB Motors Type M2AA071A -Engine power: 0.37 kW -Speed range adjustable: 64-641 rpm -Shaft: Ø15 x 40 mm -Dimensions: 450/210/H180 mm -Weight: 15.7 kg

End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

: 2000,3000 mm Working width: 200 mm Wheel width: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dresser-Rand steam turbine (new price 2.8 million EUR), unused and as good as new - built 2009 - inlet steam stream 53,000 kg/h - 1 generator type Syn. 3 phases - 60 Hz, 12.3 MW - 4,500 rqm / 1,800 rqm - gearbox RENK type TL-500, BJ. 2009, GEA surface capacitor, type 2/III/H, BJ 2007, 2 condensate pumps type Etanorm G080-400 G11, BJ 2007

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Number of color 12 Width 1850 mm

Age 1989 Consisting of: Indramat Servomotor Indexing With auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Bosch-Rexroth Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump Inline ILLIG UG70b Counter/ Stacker, On Sale on a Special Price!, Film width: 700 mm, Form Area: 680 x 280 mm, Infeed length: 300 mm, max. draw: 125 mm