rd used for sale

Material container made of stainless steel, 150 l, mobile, with telescopic suction tube and hinged lid

2 big bag emptying stations available, each unit includes. A - A support frame with safety grid. B - A pneumatic emptying aid + big bag docking device Material: stainless steel 1.4301 C - A hopper Material: stainless steel 1.4301 D - Dosing and transfer screw DS 200 Capacity: 2,000 kg / h Power: 2.2 kW ATEX classification E - Pneumatic closing valve Nominal diameter: 200 Material: aluminium / stainless steel ATEX classification F - Pneumatic transfer supply unit. Diameter: 80 G - Hoist and spreader Equipment: Yale ES1 Capacity: 1000 kg Quantity available: 2

PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm

ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts

Complete RDF installation, consisting of: first shredder Lindner Jupiter 1800 second shredder Lindner Komet 2800 windshifter eddy current and magnet dust filter all conveyors

Technical data of the bale opener line: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special  ...

Pneumatic ratchet, with torque adjustment INGERSOLL-RAND, CHARLES MAIRE BALD 3203 RD5 / 35 ( BALD3203RD5/35 ) Pmax: 6.3 bar Pmin: 4 bar Speed: 250 rpm Tool holder: 3/8 New ! Dimension ( pneumatic ratchet ): 390 x 80 x 60 mm Dimension ( packaging ): 520 x 110 x 90 mm

Bremswiderstand SIEMENS, CGS RDL9141 900Vdc 400R ( RDL9141900Vdc400R ) 6SE3290-0DA87-2RA0 80 W 400 Ω Dimensions: 280 x 80 x 60 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 25 S ( RDRKL25S ) 0,8 kVA Prim. 3 x 380 V sec. 24 V DC 25 A 50 - 60 Hz Spare part for TRAUB TND300 ! used, tested, with downstream three-phase bridge rectifier ! Dimensions: 210 x 210 x 190 mm

Bremswiderstand SIEMENS, CGS RDL9143 900Vdc 85R ( RDL9143900Vdc85R ) 6SE3290-0DC87-2RA0 400 W 90 Ω used, tested ! Dimensions: 400 x 105 x 70 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 10 S ( RDRKL10S ) 0,34 kVA Prim. 3 x 380 V sec. 24 V DC 10 A 50 - 60 Hz Spare part for TRAUB TND300 ! used, with downstream three-phase bridge rectifier ! Dimensions: 165 x 155 x 160 mm

Throttle check valve, hydraulic valve FAG RDRRV10-40-P 500 bar Connections: G1/2 New ! Dimensions: 90 x 35 x 100 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 30 K ( RDRKL30K ) 0.9 kVA Prim. 3 x 220 V sec. 24 V DC 30 A 50 - 60 Hz with downstream three-phase bridge rectifier ! used, tested ! Dimensions: 210 x 210 x 210 mm

Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 Piston Ø 125 mm stroke 200 mm rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm

RD24 cable socket, 13 pieces BINDER series 693 99 4226 00 07 Connection: Connector socket, straight Pole: 6 + PE Diameter: Ø 29 mm Length: 64 mm New Dimensions (single plug): 64 x 29 x 29 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Pneumatic cylinder JOUCOMATIC PES 100 TA 50 RDM 450 70 755 Piston diameter Ø 100 stroke 50 mm rod diameter Ø 25 mm New ! Dimensions: 300 x 180 x 125 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKG 40 KM ( RDRKG40KM ) 1,2 kVA Prim. 3 x 230 / 400 - 480 V sec. 24 V DC 40 A 50 - 60 Hz with downstream three-phase bridge rectifier ! Dimensions: 285 x 230 x 210 mm

Differential pressure transducer GLATT RDNT-423-050R Pressure range: 0 - 5 kPa ( 0 - 0.05 bar ) Output signal: 4 - 20 mA Supply voltage: 24 V DC for DIN rail mounting New ! Dimensions ( differential pressure transducer ): 130 x 68 x 44 mm Dimensions ( packaging ): 195 x 95 x 60 mm

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

Due to a clearance sale this Machine is on Sale at a CLEARANCE Price Inline ILLIG RDM 63/ 15d Thermoformer with: Auto unwind stand Auto Start System Servomotor Indexing Double heating, Sheet Sag Control Auto Rail Spreading for PP Plug assist Max. form area 750 x 305 mm Max. film width 770 mm Max. index 360 mm Max. depth of draw 150 mm Encoder on the Main Drive Shaft SCHLEICHER P-SK 2/ 126F Modern PLC Controller for Control of Form Air, Blow- off etc. Pneumatic Cylinders for automatically raising the Transport Rails after Forming Cycle. aids in removal of difficult Products from the Mold Separate Control Cabinet Machine is ready for PP

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Dresser-Rand steam turbine (new price 2.8 million EUR), unused and as good as new - built 2009 - inlet steam stream 53,000 kg/h - 1 generator type Syn. 3 phases - 60 Hz, 12.3 MW - 4,500 rqm / 1,800 rqm - gearbox RENK type TL-500, BJ. 2009, GEA surface capacitor, type 2/III/H, BJ 2007, 2 condensate pumps type Etanorm G080-400 G11, BJ 2007

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

bore capacity in steel (diameter): 20 mm turning speeds: Max. 2580 U/min tool adaptor: MK2 weight of the machine ca.: 0,05 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drilling machine make CONTIMAC type RDP 20 AMachine -No: 1001003 built in 2009Technical specifications:Max. drilling capacity: 13 mmSpindle mount: MK 29 spindle speeds: 240 - 2840 rpm.Quill stroke: 80 mmHead rotatable by: 360°Column diameter: 80mmTable size: 450 x 700 mmDistance between table - spindle: 450 mmDistance spindle - base plate: 620 mmMachine height: 1500 mmDrive power: 0.56 kWWeight approx.: 100 kgWith- baseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 400 mm Table height: 100 mm Number of T-channels: 4 Machine´s weight about: 40 kg Dimensions: Length: 500 mm Width: 400 mm Height: 100 mm

Turret Lathe Fabr. WEILER Type RDU 260/38Machine -No: 1554Center height: 125 mmSpindle bore: 38 mm14 spindle speeds: 110 - 3600 rpm.Commute d. Revolver slide: 100 mmTurret: with 6 toolsDrive power: 0.5 / 1.2 hpExternal dimensions: 1400 x 600 x 1170 mmWith- integrated collet device andCollet set- Parting support- Revolver stick- 2 quick-change steel holders m. different.insertsused, from operating resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Revolving Lathe (Post-Lathe) make WEILER type RDU 38Masch. -No: 2371/1287 built in 1973Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over cut-off carriage: 125 mmTop width: 380 mmSpindle passage: 38 mmSpindle mount: DIN 800 A12 spindle speeds: 125-2800 rpm.Drive power: 0.9 kWDimensions L x W x H: 1300 x 600 x 1200 mmWeight approx: 400 kgWith- Collet device- Parting support- 6-fold revolver tailstock- additionally flanged collet chuck Nannxa0xa0 with 16 collets up to 35 mm diameterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Turning diameter: 250 mm - Center height: 125 mm - Turning length: 800 mm - Speed range: 3,000 rpm - Total power: 9 kW - Machine weight: 650 kg - Space requirements (W x D x H): 1.4 x 0.8 x 1.85 m - Documentation: yes - Condition: very good Details Lever pliers quick clamp chuck mounted on main spindle via intermediate flange. For compression collets type 173E. Otherwise in standard design according to the present original underlay, GDW lever with push button for spindle start, GDW material stop mounted on the grooving carriage behind the center of rotation, monitoring by Beru switch by means of actuating plungers. Ram diameter 5.0 mm, standby light 3-colour with functions: "locked"-"standby"-"operation", GDW set-up key holder for safe bridging of the stop function, very well maintained machine from a workshop for the disabled, little running Accessories SCM collets:  ...

Turret lathe make WEILER type RDU 260/38Fabr. -No: 12304/442 Year 1971Center height 125 mmSpindle bore 38 mmTurning diameter over bed 260 mmmax. tip distance 500 mmBed length 1020 mm16 spindle speeds 125 - 2800 rpm.Drive power 0.5 / 1.2 hpDimensions L x W x H approx.: 1400 x 700 x 1400 mmWith- built-in electr. Collet chuck- collet set- Parting supportused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

OCTAX brand laser and laser pedal. Used in human assisted reproduction, in perfect condition it has been used very little. Year of purchase 2017

RDRK 60/S/SW

The Vierwerke Rapida RDC 106 rotary die-cutter can be configured in different variants to carry out different processes – punching, creasing, perforating, embossing Format max. 740 x 1060 mm Format min. 340 x 480 mm Material thickness from 0.03 to 0.6 mm (grammage 60-450 g/m2) The maximum mechanical capacity is 15,000 sheets/h. Equipment: • Magnetic cylinder in each punching unit to which the dies are fixed • Drivetronic SIS and a camera system to control the sheet guidance in the feeder and in the delivery. • Automatic punch pressure adjustment accuracy of 1 μm, separated for each side • Fast, tool-free change of dies - "Click&Cut" system, set-up times – up to 5 minutes for repeat jobs. • Dynamic arch brake and anti-static system

5 warp knitting machines Karl Mayer: 1 electronic machine - 2015, Italy 3 machines - 2015, Italy 1 machine - 1998, Germany

GB 800 / 7.5 / 23200, 7500mm tape length, 780mm belt width

This REIS ROBOTICS Robot System - RDT 40 / SRV 6 / RDT 40 was manufactured in the year 2001. It is a 6-axis robot system with 2 stations operated with each tilt and turn module having a load capacity of 500kg. It comes with control panel, light barrier and Fronius Magic Wave 2600 for TIG welding. See layout plan attached.

Machine was overhauled, including moulds and tools.

Operating pressure: 2bar, operating temperature: 110-450°C, weight: 1.92t, with drive and mixing screw.

Volume flow: 700m³/h, connected load: 25kW.

-for pipes up to 3"; -Bending capacity: 60.5 x 4.5 mm.

Roll Roller Plate Roller Removable top roller Max. sheet thickness: 18mm Bottom roller diameter: 220mm Top roller diameter: 210mm

Featured: adjustable spindle speed using V-snare

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Luminous flux motor, motor, gear motor, electric motor, three-phase gear motor -Motor speed: 2950 rpm -Speed gearbox: 124 rpm -Power: 0.37 kW -Construction: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 44 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 630/220/H180 mm -Weight: 30 kg

Electric motor, three-phase motor -Power: 1.15 kW -Speed: 500 rpm -Shaft diameter: 19 mm -Construction: B5 -Protection class: IP 44 -Weight: 11 kg