rd 53 used for sale

turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 30 rpm -Performance: TA = 0.06KPM -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 360/170/H175 mm -Weight: 14.2 kg

Luminous flux motor, motor, gear motor, electric motor, three-phase gear motor -Motor speed: 2950 rpm -Speed gearbox: 124 rpm -Power: 0.37 kW -Construction: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 44 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 630/220/H180 mm -Weight: 30 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Stöber type RD11-1003 -Motor manufacturer: ABB Motors Type M2AA071A -Engine power: 0.37 kW -Speed range adjustable: 64-641 rpm -Shaft: Ø15 x 40 mm -Dimensions: 450/210/H180 mm -Weight: 15.7 kg

End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

ILLIG RDM 70K Line, age 2000, Auto-Unwind stand, Preheater ILLIG VHW72, 2-Roll Preheater, Indramat Servo Motor Indexing, with ELAU Touch Pad Operator Control Panel, with display, Top & Lower heaters, total connected load top & bottom heaters 74.2 kW, Sheet Sag Control, Auto Transport Rail Spreading for PP, Max. material width 730 mm, Max. Indexing length 300 mm, Max. Forming Area 680 x 280 mm, Drive Motor 6.93 kW, Hydraulic Plug Assist, Max. Part height 125 mm, Hydraulic Power Pack, Inline ILLIG SZ73 Counter/ Stacker, Inline ILLIG RS75b Grinder (age 2003) with Control Panel & Regrind Blower., Siemens S5 PLC Controls, 400 V 3 ph 50 Hz, Line is running with PP., Continually well maintained !, Can be inspected in production

Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

General SKU253N183 LocationBarneveld MakeJohann Kreuziger Maschinenfabrik TypeRDH 500 RERE No.21159 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume450 Ltr. Motor80 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftmixer arm and dissolver disc With scrapercheck Motor57 kW (mixer): 20 kW (dissolver) With variable speed drivecheck With gear boxcheck With panø 950 x 650 mm (on wheels) Capacity450 l Outlet75 mm With hydraulic lifting(3,6 kW) MaterialStainless steel With jacketcheck General Year of construction1986 With switchgear(as is) Floorspace3,6 x 1,8 m Total height3,4 m Weight6000 kgOils & fatPaints & coatingsOintmentsFine chemicalsOther chemicalCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicPlanetary mixersKreuziger W ...

General SKU212T536 LocationBarneveld CEcheck MakeAmmag Main Features Motor1.5 KW Length1400 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Diameter187 mm Length1398,5 mm Shaft diameter106 mm Pitch103 mm InletDia. 200 mm OutletDia. 200 mm Motor1,5 kW 220-240/380-415 Volt (Ex) Screw speed96 rpm Outlet height388,9 mm Height between in- and outlet1130,1 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 With jacketcheck General TypeRDSCHN D187x1300x3,9° Mach.No.SR-1601 SG09 Year of construction2008 Floorspace1,1x0,5 m Total height0,65 m Weight230 kg ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganic ...

centrifugal blower, centrifugal fan, centrifugal fan, centrifugal fan used Manufacturer: EUROVENTILATORI SPA Type: TRC 1251 RDO ES12 Volume flow: 23724 m³/h at 15° / 71208 m³/h at 85° Pressure: 6207 Pa at 15° / 2675 Pa at 85° Diameter approx. 1800 mm Inlet approx. 800 mm Outlet: approx. 800 x 600 mm Explosion-proof: ATEX 94/9/EC ExII 2D c T125 90 kW 1429 rpm 400/690 V Dimensions: approx. 3000 x 2000 x 2300 mm All items are checked for function before delivery, if technically possible! Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

material width: 500 mm material thickness: 0,8-5 mm no. of straightening rolls: 7 sheet width: 500 mm plate thickness: 0,8 - 5 mm straightening roll diameter: 80 mm 2 pinch rolls, diameter: 80 mm Adjustable entry height Pass line: 505 mm Oiling system Roller cage Strip guide: 505 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 650 mm material thickness: 0,8 - 5 mm Feed speed: 8 m/min. total power requirement: 10 kW weight of the machine ca.: 1,5 t Material width: 650 mm Material thickness: 0.8 – 5.0 mm Feed speed: 8 m/min Total power requirement: 10 kW Machine weight: approx. 1.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m WEILER Bundle - RDU - LZ 330 - 2 x Commodor - UD 24 - DZ 67 V3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOFMANN RDI 400 ist ein waagrechter Rundtisch, ausgelegt für präzise Bearbeitungen mit hoher Genauigkeit und zuverlässigem Betrieb. Arbeitsmaße: Durchmesser 400 mm, Tischhöhe 100 mm, Anzahl T-Nuten: 4. Technische Eckdaten: Maschinengewicht ca. 40 kg; Abmessungen Länge 500 × Breite 400 × Höhe 100 mm. Ermöglicht enge Toleranzen und eignet sich für den Einsatz in Werkzeugmaschinenbau, Automobilindustrie, Luftfahrt, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

table diameter: 800 mm table load: 1100 Kg swivelling range: 360 Grad turning speeds: U/min connected load frequency: 400 V weight: 3,5 t Dimensions (LxWxH): 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 1100 Kg swivelling range: 360 Grad turning speeds: U/min connected load frequency: 400 V weight: 3,5 t Dimensions (LxWxH): 2,8 x 1,2 x 2,4 m Welding positioner - consisting of a column with RDM 50 slewing ring Typ RDM50 - RDM 11 rotary table Typ RDM 11 - System without control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multivac R 530 , built 2007 , film width 460 mm , print 480 mm , hard foil , M+R under-track labeler , 1000 ccm booster pump , Very good condition.

Used parts ex ISEKI TG 5390 AHL. 28 kw/40 hp turbo diesel, hydrostat drive 3-stage, 4-wheel drive, front power lifter, cabin, lawn tyres. Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Seat up shy sucking machine Tennant 530 E Manufacturer: Tennant Dealer: Müller conveyors Model: 530 E Serial No.: 530-7848 Year of construction: 1998 Weight: 4,600 kg : Engine diesel The scrubbing machine is no longer fully operational, but with low Effort to be repaired or used for spare parts. New price: approx. 12,000

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Cylinder head Exchange

Block/SOS bag machine with flat inside handle device, Carrier bag machine, 53bb + 43ct Bag width: 14-32cm Bottom width: 6-20cm Tube length 35-70cm with fotocell for preprinted paper, 1 ply option: 2 plies option: 4 or 5 colour tail end printer

RECON ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

HBS 533 band saw new Engine: 1.5 KW/ 400 V Cutting height: 270mm Cutting width: 514mm Roll diameter 530mm Precision roller guide Band length: 3865mm Table inclination -10°-+45° Weight: 163kg

Part Number 7405 SPECIFICATIONS - max cutting height 150mm - max element width 700mm - working width of the shaft with saws 530mm - max saw blade diameter 450mm (350mm installed) 350mm - blade bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed From below: - 2 pulling shafts, smooth - shaft with saws - Pulling shaft, smooth - 4 types of feed speeds - feed motor about 2kW - 30kW motor - machine dimensions length/width/height 2400x1700x1900mm - weight about 3000kg – Polish production – used machine, very good condition Net price: 45 900 PLN Net price: 10 432 EUR depending on the price 4,40 EUR (Prices are subject to change with higher fluctuations)

Front lift, front force lifter ex Iseki TX 5390. Further hoist also in stock ex Iseki 5040, suitable 5035, 5135, 5140. Other parts available, also diesel engine with turbocharger, 28 kw. Shipping worldwide. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Used packaging machine by Multivac model R 530. New 2007. Throughput up to 10 bars/min (8 pcs/min). Format Wedges Film machine : - bottom hard width 450 mm, thickness 400 µm - upper soft width 450 mm, thickness 88 µm Included: - templates for product insertion - traverse for printing on packaging with Hitachi printers - spare cutting bar sharpened by Multivac packed in a box - spare sealing plate - spare seal for sealing mould - inserts for changing the depth of the extruded film - basic set of spare parts - documentation and instruction manual Media connection : - current : 400v Rated power 20.5kW Rated current 47A - Air: Pressure min. 6-7 Bar - water: pressure approx. 3 Bar flow rate 2l/min Dimensions: L 9600mm W 1100mm H 2070mm

Gear hobbing machine 53A50H, STANKO, with change gears

Electronic module, brand new, 533360, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. Current market price: approx. € 94 Excl. VAT The parts were taken from a brand new valve assembly in ist original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. If you buy more than 1 item you will get a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms ...

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

Working width: 530 mm Length of the planing table: 3.000 mm Number of knives: 4-TERSA St. Motor output: 5,5 kW FIMAL surface planer type PF 530 N --------------------------------------- NEW MACHINE Partnership Edition Technical specifications: --------------------------------------- Planing table dimensions: 3,000 x 530 mm Feed table length: 1,800 mm Dressing fence dimensions: 1,500 x 175 mm Swivel range stop: 0 - 45 ° 4-knife cutterblock system TERSA d = 120mm: 5,000 rpm Max. Chip removal dressing according to CE: 8 mm Motor 380 volts / 50 Hz .: 5.5 kW Sound level according to EN 27960: 82.9 - 88.9 dB (A) Basic equipment: Electrics according to CE standards Magnetic brake Extraction nozzle d = 150mm Bridge protection control panel operated above Original AIGNER aluminum stop with integrated auxiliary stop --------------------------------------- Special offer from stock: 8,990.00 euros  ...

Nilpeter FA5 Labelpress - 10 – Colour – 535mm Year of Manufacture: 2010 ________________________________________ Technical Description: Web specifications: • Number of printing units: 10 printing units for UV colour • Printing unit 1 and printing unit 10 UV ink and water-based ink (varnish) possible • Max. web width: 535 mm • Corona: Vetaphone 3.0 KW • Turning cross: yes - flexible on rails • DE - RE Lam Station: printing unit 1 + 2 + 3 + 4 • Double Layer Station: SpilkerCold embossing unit: yes, with rail-based unwinding and rewindingDie cutter: Kocher & Beck / Gap Master System • Register control: P2P/ P2C (manual and automatic electronic register system for each printing unit) • Drying: GEW - UV drying - Rhino system • Hot air drying: printing unit 1 and printing unit 10 • Cooling: Cooling water rollers in each printing unit  ...

The used cleaning machines are all checked for functionality, cleaned and, if necessary, overhauled. Technical details: Manufacturer: Kärcher Model: BR 530 BAT, battery-powered Year of construction: 1998-2006! subject to availability Condition: very good Nominal voltage 24 V Battery capacity 75 Ah (5h) Power consumption 1200 W (1560) Suction motor power 500 W Brush motor power 600 W Suction power, air volume 30 litres/second Suction power, vacuum 140 mbar Cleaning brush working width mm 460 diameter mm 96 Brush speed 1500 rpm Theoretical area performance 1840 m²/h Volume fresh/dirty water tank 40/40 litres Total weight 150 kg Sound pressure level (EN 60704-1) 70 dB Total vibration (ISO 5349) 0.4 m/s² Built in 1998-2006! subject to availability Additional support wheels on the suction beam and at the front. We would like to point out that with regard to the  ...

Brake ring conical, 9v 532KB160, Demag, new Special offer! If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part comes from the spare parts warehouse of a certified manufacturing company, has never been used and is in mint condition. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Bakon cream blower Type: Top Cream 530 Year of construction: 2011 Stainless steel digital control Temperature indicators 1.5kW As good as new condition Height: 115cm Width: 50cm Depth: 64cm

Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, manoeuvrability and reliability needed to meet the demands of both the job and the operator. The optimal balance of attention to detail, advanced technology, a solid foundation and ergonomics meets the requirements is the advantage of the SC series. Whether indoor or outdoor, the SC Series forklifts provide a working environment that makes life easier for the operator. The position of the D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-round visibility in all directions Robust masts with double T-profile that withstand longitudinal, lateral and torsional bending forces well. Integrated sideshift with fork carriage that protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and produced by  ...

Mobile container heating system Year of construction 2023 Original price: 178.500,- € gross Boiler Buderus GE615 Power: approx. 511–570 kW Burner Weishaupt WM-L10/3-A Monarch Oil burner (tbsp heating oil) Regulation Buderus Logamatic 5311 Other components Two large heating buffer tanks Chimney outside Hydraulics complete in the container Connection cables for heating network Location of the machine: 76661 Philippsburg The facility can be visited on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.