ray used for sale

C - sheet, Ziehm Exposcop 8000, monitor trolley with double monitor, multiple digital image memory, good condition, also available as a rental device

Siemens VertIx U-Schwenkbuegel Roentgengeraet with Siemens Polydoros LX-Generator and mobile rotary table

Siemens mammography machine, digital - PRIME technology (approx. 30% dose reduction) - Year of construction 2014 - very well maintained area

23 cm BV, LIH, patient archive system, double monitor. Device for export or veterinary medicine.

BV 17 cm, LIH, CRT double monitor, patient archive system

C - elbow, type Ziehm Vision R in very good technical and optical condition.

C - arch in very good technical and optical condition. Little used.

Ziehm Exposcop 8000 with flat screen monitors. Very good technical and optical condition. Little used.

C - elbow Siemens Cios FD with detector system. Perfect technical and optical condition. Minimally used.

MRI Siemens Magnetom Trio . Also individual spare parts, coils, etc.

Mobile C-arm with high power for angiography etc.

Siemens CT, type Somatom Scope 16 lines, good technical and optical condition.

used, complete handover or as a spare parts dispenser

Hitachi CT Type: Eclos 16 slice with only 119 000 scan / Disassembled / Location : Koblenz

Mobile Xray C-Arm Ziehm 8000

Fuji Capsula XL II CR System incl. PC / Monitor / Keyboard / CD / manuals tested from technican #Welcome to inspect & test # EXW Germany

Zeiss Intrabeam System Irradiation Device, Accelerator. Used in ophthalmic therapy, tumor irradiation. With PTW dosing device. Complete with instruction manual, samples, etc.

C - Bow, Type Ziehm Vison Solo Very good technical and optical condition

Endometry RAYPEX 5 Apexlocator, Charger, Cable, Instructions

Siemens Compact L c.arm manf. 2007 / Image Intensifier Sirecon 23-2 Software version. 2VD01E Sony B/W printer 2x Flat screen monitor Excellent for EXPORT # welcome to inspect & test #

The MX-20 is a high-throughput planar radiography system that allows researchers to monitor animals quickly and affordably. This digital system can scan two to three animals at a time, depending on their size, and scans typically last 12 to 15 seconds. KV and exposure time settings can be easily changed using the computer screen or push buttons on the front of the unit. The MX-20 has geometric magnification capabilities up to 5X to provide ultra-high resolution images of small animals and specimens. The MX-20 has an energy range of 10-35KV and a tube current of 300uA. The focal spot size is

Pinacho Rayo 180 Ø 360 x 1000 mm CNC Swing over bed: 360 mm Swing over cross-slide: 198 mm Distance centre tot centre: 1000 mm Dia of spindle bore: 42 mm Power on the spindle: 5,5 HP Number of speeds: 100 > 4000 rpm Command: Heidenhain Length: 2870 mm Width: 1510 mm Height: 1550 mm Weight: 1,5 ton

Radar system, radar system -For more information, see photos

- First ownership: from own use and first hand - Center height: 180 mm - Center width: 1000 mm - Diameter over bed: 360 mm - Bed width: 250 mm - Diameter of the main spindle: 42 mm - Control: Fagor 8055 TC - Constant cutting speed: 100-4000 rpm - Working feed Z.X: 0-7000 mm/min - Rapid traverse Z.X: 10 m/min - Main engine 5.5 kW

General SKU408T1292 LocationBarneveld MakeMettler-Toledo TypeXS 3 Advancheck No.37000019 Year of construction2010 Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck Information Mounted on framecheck With switchas is Weight530 kg CEcheck Floorspace1,6x2,2 m Total height1,9 m Extra SpecificationsAccuracy class: XIII(1) Metal detectorsMettler ToledoPackaging machines > Metal detectorsBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU408T1293 LocationBarneveld MakeMettler-Toledo TypeXS 3 Advancheck No.37000027 Year of construction2010 Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck Information Mounted on framecheck With switchas is Weight530 kg CEcheck Floorspace1,6x2,2 m Total height1,9 m Extra SpecificationsAccuracy class: XIII(1) Metal detectorsMettler ToledoPackaging machines > Metal detectorsBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

This is a completely new Handheld XRF Gun in full working order ready for use still in factory warranty. It has a great performance comparible to XRF such as Thermo Niton, Olympus Vanta or Bruker Titan or even other ED X-Ray Benchtop Spectrometer like Spectro Midex, Thermo Scientific, Bruker Mistral or Fischerscope. Original price of the system is more than 30.000Euros. It can analyze Precious Metals and Catalytic Converters very fast in 30sec. It is sold because we do not use it as much. SciAps X-505 Precious Metals Analyzer. Part No 910-500066 PM. Ultra lightweight X-ray analyzer featuring tapered, ergonomic design ideal for testing requirements. The X-505 utilizes a miniaturized X-ray tube, Rh anode (50 kV, 200 uA, 5 W) and high resolution, high count rate silicon drift detector (25 mm2 SDD, 140 eV at 5.95 Mn K-alpha line, at 90+% live time, 250k cps) for fast alloy chemistry  ...

Output: up to max. 330 containers / minute (plastic bottles with delicatessen sauces 200 g), single-beam X-ray inspection device (side view), Tube replacement in Sept 2022 - 1 additional new X-ray tube included, max. bandwidth 156 mm, Scanning height: 425 mm, Power max. 600 W, Voltage: continuously adjustable up to 60 kV,, Current: up to 10 mA, continuously adjustable, Designed as a curtain-free X-ray scanner, Scanner tape: 2600 x 190.5 Intralox, Total length of the system: approx. 2706, Working height: 950 - 1050 mm, Working direction: left - right, Elimination: short-stroke pusher, Belt conveyor belt with IMOT drive unit (servo motor) for, Overtracking., Tool-free quick-change device for replacing the, belt., Continuous adjustment of the transport speed via the, Control of the machine. Small transfer radii for optimal, Product transfer situation on the incoming and outgoing conveyor.,  ...

CARTRIDGES FILTER MANUFACTURER: DONALDSON TORIT manufacturer: Original Donaldson Torit filter material: Extremist web original type: 262-5026 (Open available: 20 pieces of price: each 90.-? 262-5002 (lids) Available: 3 pieces of price: each 90.-? 262-5015 (Open available: 5 pieces of price: each 70.-? suitable for ray arrangements Ray cabin Lackieranlage plasma Absaugung etc.

Fischerscope XDLM 237 XRAY / X-ray fluorescence spectrometer XRAY spectrometer for non-destructive determination of layer thicknesses for all common metal coatings as well as other material analyses using X-ray fluorescence. Contact us if you have any questions about the previous application. The device is fully functional and will be reset to factory settings before delivery. All maintenance was carried out by the manufacturer's service team according to the manufacturer's specifications. Any repairs and acceptances were also commissioned from the manufacturer. It is a full protection device with the appropriate type approval. Periodic inspections in accordance with the requirements of the Radiation Protection Ordinance have always been carried out by approved experts.

ULTRAFOCUS DXA is a high-resolution X-ray Dual Photon Absorption (DEXA) imaging and measurement system. The entire system comprises an X-ray unit and a workstation, and can be installed on the laboratory bench or directly in the vivarium to protect the integrity of the colony. With its 10 x 15 cm CMOS detector and energy range from 10 to 100 kV, ULTRAFOCUS DXA is ideal for imaging a wide range of samples and for true DEXA analysis. The microfocus tube and geometric magnification - up to X 6 - provide images with a resolution of 8 μm. In DEXA mode, the system automatically calculates lean and fat mass (BMD - BMC) with percentages. Data for the whole body and the area of interest (ROI) are presented. Used under GMP conditions, it has been out of service since November 2023.

General SKU300U907 LocationBarneveld MakeSiemens TypeDiffraktometer D5000 Year of construction1991 Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice. MiscellaneousSiemens - ElmoMiscellaneous > MiscellaneousBrand > Siemens - Elmo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

Generator -Monobloc design; 2.2kW Compact digital generator; Housing heat capacity: 1040,000Hu; Housing heat capacity: 1,040,000HU X-ray Tube - Stationary anode, dual focal spots 0.6 and 1.4mm; Tube assembly total filtration ³ 3.0mm Al; Anode heat capacity: 76,000HU; Anode cooling rate: 37,000Hu/min Collimator - Iris collimation; Dual opposing parallel semi-transparent shutters (180° rotation) Image Intensifier - Tri-mode 23/15/11cm (9/6/4.5); Grid: 8:1 ratio 40 l/cm (102 l/in.) TV Camera - High resolution CCD-Camera; Matrix: 752 x 582; Bandwidth: 20MHz; Video signal: CCIR /50Hz, 625 lines Fluoroscopy - Focal spot: 0.6mm; kVp range: 40-110; mA range: 0.1-4.0 0.2-8mA (snapshot); Fluoro modes: - Continuous, - Snapshot, - Pulsed (2p/3s); ABC: Automatic Brightness Control; Dose area product (optional); Skin spacer 30cm (optional) Radiography - Focal spot: 1.4mm; kVp ra ...

Philips X-ray with fluoroscopy Type multinational Diagnost 3 with digitally Fluoro-Radiografie, DFR

X-ray tube assembly type SRM 2250 red abzugen GS-500.

Checks the level of liquids using X-ray and checks to see whether has no plastic or metal cap.

CT with almost new X-ray tube Assembly

Lithotripter with X-ray unit in good condition

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Lithotripter Wolf Piezolith 3000 Table Ultrasound C-arm X-ray Calibrate tools Manuals

Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blaw-Knox in 1923. • Ma ...

30 cm image amplifier with 2 x magnifying glass function 100 Hz double monitor, Black Vision, 250 Image Memory Usb DFP, DAP Resolution 1.2 - 1.4 Lp/mm X-ray emitter scan replaced in 2019 Refurbished

Product number: 2397P Weber slicer Type: CCS904 Serial number: 7096 Year of construction: 2007 Capacity: 2000 RPM Slice thickness: 0.5 - 50 mm Compressed air: 10 Bar, 150 L/min. Power: 3 x 400V, 50Hz, 10 kW Dimensions: 13400 x 1900 x 2600 mm Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit Multivac thermoformer Type: R530 Serienummer: 115612 Year of construction: 2007 Film width: 560 mm Index: 1200 mm Dye: 3.5 Power: 3 x 400V, 50Hz, 36.5kW Dimensions: 14850 x 1300 x 2450 mm Hard film machine for vacuum and gas flush Pago labeler Type: System 516 Serial number: 212516068 Year of construction: 2012 Mettler Toledo metaldetector and checkweigher Type: XS3 Serial number: 35000430 Year of construction: 2008 With reject Mettler Toledo X-ray machine Type: Safeline R20 Serial number: 3113R20V3268 Year of construction: 2013 ...

Used Heuft Empty Bottle Inspector InLine IXs reflexx Device No. 2ZG044698 Condition: very good, ready for use at short notice ·       Commissioning 6 May 2012 ·       Upgrade for later integration of additional ground control using X-ray technology ·       Tape control Heuft Synchronous TX ·       Network Heuft Hlan ·       Haylofts two ways discharge with div. Heuft container transport Convejor ·       Troubleshooting Software Wizard ·       Software assistant guided instructions for the different container changes ·       Power max. 46,000 fl./h ·       5 Variety licenses incl. scope of delivery: ·       Belt control Spectrum TX ·       Measuring bridges for inlet control and discharges incl. height connections ·       2 x Discharge Delta K  ...

Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages                            Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator

Can filling line capacity: approx. 24,000 cph Filling Product: Soft drinks Can size: 330 ml and 500 ml standard cans Can Type: 211/202 consisting of: 1. Can depalletizer King with automatic can infeed system with Siemens S7 PLC including can table, pallet magazine, sheet removal system the depalletizer is fixed for the following pallet dimensions: 1.180 x 1.250 mm 2. Can rinser Transtech Hysek to rins new cans with filtered water infeed height: approx. 2,500 mm Outfeed Height: approx. 1,200 mm 3. Can filler and seamer KHS / Ferrum - Filler Innofill EMD 76 with 76 filling valves blocked with - Can seamer Ferrum type: F708G with 8 seaming stations the filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S7 including Danfoss frequency inverter including beer pressure regulating valve including CIP  ...

1. Qty. 1 Second-hand process tank Mfc.: Glencore Volume: 26 m³ Built: 1999 Dia.: 3.0 m Height: 3.85 m Stopped: 2018 Material: AVESTA 2205 (Super Duplex Steel) Asset: Zinc Asturine Capacity: 440,000 t/Year Useful Volume: 20 m³ Diameter: 3000 mm Overall Height: 3850 mm Design: Atmospheric Pressure Service Temperature: 35º C Stored Product: Return Acid Density: 1.24 kg/dm³ Welding According to API 650 X-Ray According to API 650 Empty Weight: 2355 kg Weight in Service 24.800 kg Construction Structural Element Thickness Material Roof 6 mm AVESTA 2205 Depth 6 mm AVESTA 2205 Ferrule 4 mm AVESTA 2205

Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt