ray used for sale

Fischerscope XRF X-RAY 5400 X-ray fluorescence - EDXRF spectrometer Year of manufacture 2010 2010/11 has measured with ca-400 hours of operation, only sporadically in a pilot plant (sputtering LEYBOLD) New price: 100.000 € 5400 x RAY X-ray fluorescence - spectrometer (EDXRF) are designed for use in industrial production facilities, specially designed for continuous measurement in the manufacturing process, to the non-destructive analysis and measurement of thin layers and layer systems. For the industrial requirements and continuous operation, they are particularly robust and low-maintenance design.

Raystat / Krebser Swivel Bracket US-Uni with - Generator CPI CMP 200 DR - Tube RAD 14 Fa. Varian 0.6/1.2 - Mobile patient couch • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Single beam X-ray inspection device,, was used for cylindrical jars and cans,, Capacity: approx. 150 glasses / min,, with ejection of contaminated containers,, with conveyor belt,, in use until 04/2024.

Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high vo ...

End-of-line X-ray scanner for professional foreign body detection,, Ideal introduction to state-of-the-art X-ray inspection,, easy integration into existing production lines,, comfortable user interface,, easy, fast and thorough cleaning,, Max Product, Height/width: See enclosed beam chart, Running direction: L->R, conveyor belt, height: 850 – 950 mm (adjustment range), Throughput: approx. 100 pcs/min (please contact us before submitting an offer), Degree of protection: IP 65, Sorting: using band-stop, Total length: 1,800mm, Bandwidth: 420 mm, Scan width: 400 mm, VPN access: yes, EKS: Yes, X ray lamp, Monitored yellow: yes, Light red: yes (active with FK detection), Statistics export: yes, Basic machine equipment, a) General machine data, • Industry scanner made of stainless steel with open profile, • Power supply connection:, o 110-230VAC / 50/60Hz / 1Ph I o approx. 2.2 kVA I o ap ...

Manufacturer: Precision X-Ray Model: X-Rad 160 XL Year of Manufacture: 2024 Run time: Approximately 80 hours, based on unit logs Machine type: X-ray irradiation system Input voltage: 1PH 230VAC, 50/60Hz FLA (Full Load Amps): 40 Amp Application: Used to irradiate semiconductor ICs for robustness testing to X-ray exposure Usage history: The project this unit was purchased for has concluded. It was found the exposure type could not be well quantified for future qualification needs, so the unit has not been used much recently. Condition: Fully functional, but displays error messages that do not clear during warm-up or irradiation. When this occurs the unit must be restarted, and it may take several attempts to complete warm-up and function. Cooling: The tube cooler is wall-mounted to save space, but can also be set on the floor.Hoses allow the unit to be positioned at least 10 feet  ...

Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, trace heating thermostat -Manufacturer: Raychem, thermostat with temperature sensor -Type: TRDR -Temperature range: - 0-15 °C / 0-15 °C -Dimension: 160/105/H55 mm -Weight: 0.6 kg

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

General SKU408T1293 MakeMettler-Toledo LocationBarneveld CEcheck TypeXS 3 Advancheck Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck General No.37000027 Year of construction2010 Mounted on framecheck With switchas is Floorspace1,6x2,2 m Total height1,9 m Weight530 kg Extra SpecificationsAccuracy class: XIII(1)Oils & fatPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesMetal detectorsFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesBiopharmaceuticalAPIMett ...

table length: 3048 mm table width: 1524 mm burner heads: 1 stroke: 270 mm speed: 100 m/min dimensions: 8900 x 2260 x 2220 mm weight of the machine ca.: 7.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Trotec Model: Rayjet Type of Machine : CO₂ laser cutting and engraving machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU423U1428 LocationBarneveld CEcheck MakeMettler Toledo Main Features MaterialStainless steel Motor2.3 KW Specified Features - Miscellaneous Capacity3,600 scans/sec Motor2.3 kW, 240 volt MaterialStainless steel With jacketcheck General TypeR20 Mach.No.1009R20V1321 Year of construction4-2009 Floor space2,00 x 1,00 m Total height2,40 m Weight600 kg Extra SpecificationsScan speed 3,600 scans/sec, diode size 0.2, 0.4, 0.8 or 1.5 mm.touchscreen control.input belt conveyor with motor, 0.37 kW, 1380/168 rpmair pressure 6 bar- easy to implement in a systemOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-wast ...

General SKU408T1292 MakeMettler-Toledo LocationBarneveld CEcheck TypeXS 3 Advancheck Main Features MaterialStainless steel/Polypropylene Specified Features - Metal detector Metal detectorcheck Tunnel sizes270x160 mm Product space270x160 mm With conveyor beltcheck Belt width290 mm Belt length2170 mm With motorcheck With variable speed drivecheck Belt speed50 m/min Inlet270x160 mm Capacity120 pcs/min With air pulse ejectioncheck General No.37000019 Year of construction2010 Mounted on framecheck With switchas is Floorspace1,6x2,2 m Total height1,9 m Weight530 kg Extra SpecificationsAccuracy class: XIII(1)Oils & fatPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesMetal detectorsFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesBiopharmaceuticalAPIMett ...

General SKU327U784 MakeRayneri Groupe VMI (FR) TypeDynablox SB 35 SE No.100853 Year of construction02-1999 Mounted on framecheck Main Features MaterialStainless steel Motor1.5 KW Length900 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length900mm Sizes stirring headDia: 300mm Number of stirrers on shaft1 Motor1,5 kW, 230/400 Volt 1410rpm With frequency controllercheck Speed mixing shaft354 rpm Mounted on supportcheck Adjustable height(manual) MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General LocationBarneveld With switchgear(as is) Floorspace1,6x1,1 m Total height3,0 m Weight350 kg CEcheck Extra SpecificationsThe machine comes with an additional spiral-cup agitator.Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotech ...

General SKU215X090 MakeVMI Rayneri TypeDYNAVAR SB 25 No.129542 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Length1300 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1300 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft350 — 1750 rpm MaterialStainless steel 1.4306 (304L) General Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceutic ...

General SKU292M361 LocationBarneveld MakeVMI Rayneri TypePIL.direct 15/750 VF No.75953 Main Features MaterialStainless steel Motor0.75 KW Length700 mm Specified Features - Stirrer Propellor stirrercheck Shaft length± 700mm Sizes stirring headø 110mm Motor0,75 KW, 230/400 Volt With frequency controllercheck Speed mixing shaft100-808 rpm Mounted on supportcheck Adjustable heightcheck MaterialStainless steel General Year of construction1996 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,1 x0,8 M Total height1,7 M Weight150 KGOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCos ...

This 3-axis Trotec Rayjet R400 was manufactured in 2021. It features a powerful 100 W DC CO2 laser source and a generous working area of 1030 x 630 mm. The machine is equipped with an air assist system, LED lighting, and a control panel for precise laser positioning. If you are looking to get high-quality laser engraving capabilities, consider the Trotec Rayjet R400 laser engraving machine we have for sale. Contact us for further details.

A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. ...

Technical data Brand: XGUARD IQ / XNDT Type: Vario C 3326 Machine Type: Digital Industrial X-ray Cabinet Year of Make: 2012 Generator: Orange 1025HF X-ray tube: Toshiba D-124 Voltage range: 40–100 kV mAs Range: 0.32–30 mAs Exposure time: 0.02–2.5 s Detector: DR3326 (1210P Rayence) Resolution: 3.60 lp/mm Pixel size: 127 μm Active Area: 2080 × 2560 pixels Mains connection: 230 VAC / 50-60 Hz / 16 A Configuration Full-protection X-ray system for non-destructive testing (NDT) PC workstation with monitor and software available Warning light and safety devices integrated Technical documents and training documents available Application: Quality Control and Die Casting Inspection New price according to documents > 75,000 € Technical acceptance may be required for recommissioning Auction-ID: A7-49302-3039

Offered is a digital X-ray - workplace, type Siemens MULTIX choice DR Year 2012 in very good condition. System is still in clinical use and will be released beginning March, 2015.

Multifunction X-ray machine Built in 2005 Generator Poydoros SX 65/80 Image storage LIH (last image hold) Image intensifier 23 cm Tube Optitop 150/30/50 Very good optical condition

Ladies and gentlemen, below the offer for a used 200 beds hospital The entire technology can be checked before handover. Prices: on request We are also happy to offer you other new and used medical devices. We would be pleased to have your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buye ...

X-ray unit Siemens Multix / Vertix with 3D III Deckensrativ and Polydorus LX X-ray Generator

A-197 Varian X-ray tubes CE-No. 0086 perm. FILT. 0.7 AL / 75 kVP 150 KL. Focus 0.30 Gr. Focus 0.80 Price on request

Siemens Uroskop Access in gutem technischen und optischen Zustand Baujahr 2005 alle technischen Unterlagen und viel Zubehör

GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...

X-ray tube for multi star Type: MEGALIX 125/40/82CM-120W

Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Picker SureView M2 with: Tube M-147 0.1/0.3 Bucky 18x24 and 24x30 Without radiation protection wall complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into ...

GE Revolution XR/d with the following system components: Generator Jedi 80 tube MX 100 0.6/1.25 1 x detector 41cm 41cm separate mobile X-ray table company Zetta • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Ziehm Vision RFD 3D is the world's only 3D C-arm with flat-panel technology that provides a 16 cm edge length per scan volume combines 2D and 3D functionality to offer maximum intraoperative control. THE ULTIMATE C-ARM TO OUTPERFORM The treatment of cardiovascular and degenerative musculoskeletal conditions calls for high-performance intraoperative imaging technologies. Incorporating the latest CMOS technology for excellent image quality, the Ziehm Vision RFD is the ideal product. In addition to the cardiovascular-focused 20.5 cm x 20.5 cm flat-panel version, the Ziehm Vision RFD is available with a 31 cm x 31 cm CMOS flat-panel detector. This is the preferred model for highly demanding orthopedic, trauma or cardiovascular interventions that require more information in one image. Both systems are equipped with a powerful generator for optimum penetration, Advanced Active Cooling to e ...

Siemens AXIOM sire Skop SD with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0.6/1.0 digital image processing Fluorospot compact Image intensifier Sirecon 40-4 HDR 40 cm The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

C - bow, Ziehm Exposkop 8000, monitor cart with dual monitor. digital image storage, good condition, also as a possible loaner

C arm, monitor cart with dual monitor, digital multi image storage, good condition

Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is  ...

Sirona Small X-ray / Intraoral Machine Heliodent Plus with Tube D 3507 0.4 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...

Helmut Fischer XDL-XYmZ X-ray fluorescence device For sale is a professional X-ray fluorescence device (XRF) from the brand Helmut Fischer GmbH + Co, model XDL-XYmZ. Power: 120 W Voltage: 230 V / 50–60 Hz Model Number: XDL-XYmZ Made in Germany The instrument is ideal for precise material analysis in the laboratory, quality control and industrial environment. Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...

Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...

Siemens Vertix 3D built 2010, refurbished 2019 The offer includes the following components: 3D ceiling stand with integrated cassette holder for ENT recording Grid wall 3D hydraulic multixtable Polydoros LX 30/50 Generator with touchscreen control panel Dose area productmeasuring device Agfa CR 85X Memory Film Scanner Transportation €860.00 Installation €2500.00 Optional: Full body grid wall AGFA CR Easylift, new X-ray tube, C-bow Ziehm Vista 6 months warranty When ordering by 01.03.2020 10% discount

Siemens Polydoros IT 80 with control panel (touchscreen) Model No. 07759793 (generator cabinet) 10410669 (control panel) Year of Manufacture: 2008 (generator cabinet) 2021 (control panel) Condition: used, removed from functional system (Siemens Multix MT) The generator is often used in combination with Siemens X-ray systems such as Multix, Ysio or Siregraph. So it is perfect for replacing a defective generator for these systems. • Before taking over, all devices or systems have been tested on site for their functionality. • The generator is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the generator in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany ...

Universal and variable X-ray system. Mobile C-bow with 80 kW power iruund compact design. Particularly suitable for vascular diagnosis and surgery, cardiology, neurology, orthopedics, etc. Very good image quality through CCD Camera, image postprocessing, DICOM etc.

Siemens MAMMOMAT INSPIRATION, built in 2009 with detector from 2007 in very good technical and optical condition

Siemens Tube OPTI 150/30/50 HC Tubular housing: OPTI 150/30/50 HC - 100, Model No. 4803404 Tube Model No. 4803388 Focal spot 0.6/1.0 Depth Aperture Model No. 8375040 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as  ...

Siemens Small X-ray / Intraoral Device Heliodent MD with tube SR 60/70/7 0.7 • Before takeover, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "IST" state from the freiberg (EXW), Saxony, Germany, and prepayment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation and configuration of the system or parts must be carried out by a specialist or technician authorized by the manufacturer! • The offer is subject to interim sale.

As good as new measuring frame with X-ray radiation for basis weight measurement on web fabrics up to a maximum width of 1000 mm. YOC 2014, approx. 2 ́100 operating hours, fully functional X-Ray-Gauge in good condition, for meassuring coatings or material weights up to max. 1000 mm widht. YOC 2014, about 2 ́100 running hours, fully functionable