ravo used for sale

Hoist, car lift, hoist, lifting device, pit jack, axle free jack, truck hoist, axle jack, free jack -Manufacturer: RAV Ravaglioli, axle lift pit jack -Type: unfortunately without nameplate/ techn. Data -Load capacity: 2x kg -Lifting height: 240 mm -Jacking points: adjustable, center approx. 770 to 1220 mm -Pit width: adjustable, approx. 780 to 1050 mm -Dimensions: see photos -Transport dimension: 890/370/H245 mm -Total weight: 83 kg

Double crankshaft mechanical press RAVNE DE 315 2 crankshaft, closed type, simple action press DE 315 Manufactured by Zelezarna Ravne, Yugoslavia Press is in excellent working condition, has moving table and hydro cushion YOM 1990 Description Capacity 315 tons Slider stroke 400mm Number of strokes per minute 18 Table dimensions 2500 x 1400 mm Slider dimensions 2500 x 1400 mm Distance adjustment between table and slider 250mm Distance between table and slider in its lower and upper adjustment position 700mm Force of hydro cushion 8 tons Stroke of hydro cushion 155 mm Weight 75 tons

Key data: 2000 , 9470

Turning diameter: 2000 mm Turning length: 9470 mm Turret positions: 0 Make: Ravensburg Type: KVH3 - 1000 CNC YOP: 2005 Max. turning Ø:2.000mm X-Axis:        780mm Z-Axis:        9.470mm Spindle bore:  150mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:4 Length:        17.000 mm  Width:         6.500 mm  Height:        3.200 mm  Weight:        67.000 kg  Work load 15 t (20t) Hydrostatic guideways support Chuck 1300 mm Siemens 840 power line X/Z/C Axis C Axis 360.000 direct driven Sauter 4 position tool system CAPTO C6 2 x Steady rest 500 + 750 mm Milling attachment Sk40 / 1500 RPm / 4,5 kW

Code: 0583 Brand: RAVNE Model: 3700 Integral steel Knife (blade) for veneer guillotine mm 3600 Length mm 3700 Height mm 110 Thickness mm 12

Plan copy lathe make RAVENSBURG type K 600 KHKom. -No: 8792 built in 1972Technical specifications:Turning diameter over bed: 1000 mmTurning diameter over facing slide: 600 mmfor face plates up to: 800 mm dia.max.distance between faceplate and support: 600 mmLongitudinal feed: 1 - 170 mm / minPlan feed: 1 - 170 mm / minMain spindle diameter: 166.68 mmSpindle bore: 80 mm12 spindle speeds: 1.7 - 600 rpm.gr. torque on the faceplate: 500 mkggr. workpiece weight: 500 kgDrive power: 22 kWWeight approx: 5.8 tExternal dimensions L x W x H approx .: 3500 x 2000 x 2000 mmWith- swiveling control panel- separate control cabinet- hydr. Copier- Thyristor drive- separate hydraulicsWITHOUT the lining shown!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be plea ...

Facing lathe Fabr. RAVENSBURGMachine -No: 7416, built in 1974Faceplate diameter: 1000 mmCenter height in the offset: 930 mmTurning diameter in the crank: 1860 mmTop height ü. Support: 450 mmTurning diameter ü. Support: 900 mm12 spindle speeds: 6 - 270 rpm.24 autom. Feed rates: 0.04 - 2.82 rpm.Support - Longitudinal travel: 1250 mmSpindle bore: 80 mmDrive power: 15 kWExternal dimensions: 4000 x 1500 x 1800 mmWith- Face plate 1000 mm Drm.- Quadruple steel holder- Support travel longitudinally and transverselyused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

No. 4944: 1 gebr. Lathe Fabr. RAVENSBURG, type K 66 - 3500 ( 4500 ),Bauj. 1972 Arb.-Ber.: Sph. 1100xSpw 3500 (4350) mm, Accessories: Plate of 1500 mm Tailstock Bed extension Rollers - Support bracket Bezel Grinding support Other: Speed range 0.6 - 250 min-1 Space requirement approx. Weight approx.

: Ravensburg A2,2 circulation diameter max.: 2.200 mm diameter of quill: 90 mm weight of the machine ca.: 1,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical shaping machine manufactured by RAVENSBURG type S 200Technical specifications:Large stroke of the ram: 200 mmRam adjustment: 200 mmRound table diameter: 440 mmThroat: 410 mmGroove width max: 32 mmHeight between table and ram guide: 370/470 mmLongitudinal table displacement: 375 mmCross table displacement: 350 mm4 lifting speeds: 33/49/75/110 H / min6 feeds, lengthways per slide stroke: 0.03 - 0.3 mmacross per ram stroke: 0.07 - 0.7 mmround per ram stroke at 100 mm diameter: 0.05 - 0.5 mmDrive power: 3.0 kWDimensions approx: 1000 x 1600 x 2200 mmWeight: 2000 kgWith- Round dividing tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Ma ...

Head lathe, face lathe Manufacturer Ravensburg Type PKZ Center height 1140mm Center width 3000mm Turning diameter over base plate 2200mm Turning diameter via bed carriage 1700mm max. workpiece weight in the feed 3000kg workpiece weight between the tips 8000kg The machine is technically and optically in very good condition.

Manufacturer / model RAVENSBURG P 30 New in 1976 / 2019 Swing Over Bed 3.040 mm. Swivel diameter in pocket 4.300 mm. Turning length 3.600 mm Turning length 140 mm. Speed Range 0.18-92 rpm. Speeds 36 4 axis digital readout system HEIDENHAIN 8 independent jaw chuck Ø2.500 mm. INCLUDED Max workpiece allowed 25.000 kg Equiped with tolos and jaws INCLUDED Total power 56 kW Machine weight 55.000 kg Machine dimensions (LxWxH) 9.450 x 4.700 x 4.400 mm.

Capacity, ton 630 Ram stroke, mm 300 Ram adjustment, mm 220 Number of strokes per minute 15 Table dimensions, mm 1100 x 1500 Slider dimensions, mm 1000 x 1250 Distance between table and slider in its lower and upper adjustment position, mm 650 Ram ejector stroke, mm 100 Capacity of hydro cushion, ton 55 Stroke of hydro cushion, mm 150 Main motor power, kW 55 Press weight, kg 63000

The force of 500 tons. stroke 305 mm. Adjust slide bar 254 mm. Distance between table and slide 485 mm. Distance between columns 3050 mm. Table size 2740 x 1370 mm. Pusher in table 155 mm. Maximum press height above floor level 6900 mm. Power 37 kW. Number of RAM strokes 12 strokes/min. Weight 93 tons.

Capacity: 250 ton Slider stroke: 400 mm Number of strokes per minute: 25 Table dimensions: 2500x1250 mm Slider dimensions: 2500x1250 mm Distance adjustment between table and slider: 250 mm Distance between table and slider in its lower and upper adjustment position: 800 mm Clamping plate thickness: 100 mm Hydro-cushion: -Force: 46 ton -Stroke: 160 mm Weight: 70 ton

3 guideway flat bed lathe Distance between centers: 6100 mm Swing over bed: 1500 mm Swing over cross-slide: 1320 mm

Retrofitted in 1998 and revised in 2012 by SIRMU Technical datas: Stroke: 2000 mm Inclination of the platform: 0-60 ° Rotation: 360° Table diameter: 4.500 mm Maximum table load: 50,000 kg Plate diameter: 2.250 mm Movement 4 stages 1 28 mm / min 2 100 mm / min 3 280 mm / min 4 560 mm / min tilting of the table: 0-60 ° 4 stages 2 0.7 ° / min 3 2 ° / min 4 4 ° / min 5 7 ° / min Rotation of the table 4 stages 1 270 mm / min referring to a diameter of 3,500 mm 2 890 mm / min 3 2,700 mm / min 4 5,400 mm / min Total weight: 90,000 kg

faceplate diameter: 1300 mm turning diameter over slide rest: 850 mm centre distance: 1800 mm turning diameter: 2150 mm turning speeds: 3,15-160 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1200 mm turning diameter over slide rest: 900 mm turning length: 2000 mm Control: Siemens spindle passage: 90 mm type: Sinumerik 3T Tool changer: 16 number of spindle speeds: 2,4-900 U/min spindle motor: 54 kW tail stock: 3 jaw chuck Forckrath: 630 mm chip conveyor: total power requirement: 87 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 11x4,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 0 mm turning diameter over slide rest: 900 mm turning length: 1.000 mm total power requirement: 25 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m Height of centres 550 mm Max. turning Æ 1200 mm Max. turning Æ over slides, approx. 900 mm Max. turning length, approx. 1000 mm Spindle bore, approx. 90 mm 24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/min Total load, approx. 25 kW - 380 V - 50 Hz Weight, approx. 8000 kg Accessories/specialities Two separate slides, each equipped with 2-coordinate copying equipment, program controlled by plugboard, strengthened bearings and spindle, hardened and ground guideways, FORKHARDT 3-jaw chuck/ face plate, separate switch cabinet and cooling equipment. This machine ...

Turning diameter: 1200 mm Center distance: 6500 mm Spindle bore: 150 mm Numbers of bed guide ways: 3 Weight between centres maximum: 7000 kg CNC Brand: Siemens CNC latheRavensburg - KV1 - 700 CNC  Work load flying in chuck 2500 Kg Work load supported 10000 Kg 4 Chuck 1000 mm with heavy jaws Clamping inside 200-1120 mm  Clam;ping outside 80-1000 mm  C-Steady rest 100-450 mm x 7000 Kg C-Steady rest 400-600 mmx 7000 kg Sauter 6 position revolver Swing over bed Ø:        1200mm Swing over cross slide Ø:700mm DBC Turning Length:      6500mm Spindle bore:            150mm Spindle power:           80kW Tailstock spindle Ø:     200Ø Stroke pinole:           200mm Spindle taper:        &nbs ...

turning diameter external: 4.300 turning length: 3.600 mm swing diameter over bed slide: 3.040 mm bar passage: 140 mm turning speed range: 0.18-92 U/min digital readout: HEIDENHAIN total power requirement: 56 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 9.450 x 4.700 x 4.400 m New in 1976 / 2019 - 8 independent jaw chuck Ø2.500 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largest stroke of the plunger: 500 mm ram adjustment: 400 mm Inclined position of the plunger, on both sides up: 20 Grad (°) : 380 mm Maximum distance between table and plunger: 1 280 mm throat: 775 mm height between table -ram: 700 mm table diameter: 700 mm table hole: Ø 130 x 100 mm longitudinal travel: 600 mm cross travel: 600 mm stroke speed: 3 - 80 m/min longitudinal feeds, infinitely variable: 0.01 - 1 mm Smallest increment of the rotary table: 0.01 Grad (°) Rapid traverse speed: 2 000 mm/min. cutting capacity: 2 500 kp total power requirement: 45 kW weight of the machine ca.: 7 t Control: Siemens SINUMERIK 810 N Machine geometrical Digital readout, many accessories! Operating voltage 400 V / 50 Hz Total operating power 45 kW Tank capacity 200 liters Cooling and heating capacity 4.6 / 1.5 kW elivery rate gear pump 20 l/min at 6 bar CBN grinding wheel diameter 45 / 65 / 70 / 75 / ...

max. ram stroke: 350 mm throat: 650 mm table diameter: 750 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: 350 mm throat: 650 mm table diameter: 750 mm total power requirement: 5,5 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Toshiba cassette climator RAV SM804UT-E incl. outdoor unit RAV SM803AT-E; Consisting of: 1 x Toshiba 4-way cassette transformer RAV SM804UT-E 1 x outdoor unit RAV SM803AT-E 1 x Standard Remote Toschiba RBC-AMT32E inverter compressorheating function room size large 50m2 max 115m3 The new 4-way cassette is A newly developed turbo axial fan allows the geraete to work very quietly While the improved design of the ceiling panels guarantees a perfect air distribution with very low temperature differences. Main ceiling panels with direct or wide semite-emitting airflow Individual multi-lame control function Auto diagnostic system Very low size height of only 256 and 319 mm Fresh air supply with external fan possible unit: RAV-SM804UT E Cooling power (power range) kW 6.70 (1.50-7.40) Power consumption kW 2.09 EER W/W 3.21 SEER 5.6 3heating power (power range) kW 8.00 (1.50-9.00) Heat power ...

Weibert RAV 32 Feeder 3 rolls 4 Speeds large. Projection 700mm 188W 400V Roll diameter: 80mm Roll width 28mm G&RO-14_9930

Weibert RAV 34 Feeder Large tripod projection 1100mm 3 feed rollers 120 x 60mm 4 Speeds 750W/ 400V Weight: 27+34kg G&RO-14-9933

7pcs Zeta REV HP XT 18.4 master-slave control 1 piece Zeta REV HP XT 12.4 Zeta REV HP XT 18.4 / EC 1P - hydraulic module with one pump LN - Soundproofed RUB - Shut-off valves compressors BC - Storage capacitor for electronic expansion valve VEC - EC Fans FVP - Flowzer VP FVDE - FLOWZER VDE RA - Antifreeze Heater PBA - BaCnet™ protocol on TCP-IP FM6 - Multilogic function for master with management of up to 6 slaves 1 of 7 and 7 slave SETV - Variable setpoint shift above 0-1V, 0-10V, 0-4mA or 0-20mA Signal RMMT - Voltage Monitoring IACV - Circuit breakers for Compressors and fans A43 - Power supply 400/3/50 AG - Rubber vibration dampers RAV - Antifreeze heating resistor for Condensate collection basin and Zeta REV HP XT 12.4 / EC 1P - hydraulic module with one pump LN - Soundproofed RUB - Shut-off valves compressors BC - Storage capacitor  ...

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

Item condition: New. Machine is delivered pre-assembled and tested! Specifications / Specifications S-720/T CNC-Fraesmaschine and G raviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.- and engraving machine you acquire old-fashioned technology with the certain I-Tpfelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingess esons up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This i ...

Various threaded rings, border raven gauges, measuring rings Etc in the item

oven 10 - 1150 Celsius inner 1x1x2m plc auto door various size possible Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteö fen Chargentrockner Drucksinteröfen Durchlauföfen Kipp – Tiegelöfen Laboröfen siehe Lack – Einbrennöfen Lack – Trockenöfen Messing – Glühöfen Muffelöfen Magnesium –Schmelzöfen Ölversorgungsanlagen Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfe n Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce  ...

Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: TER Tecno Elettrica Ravasi, crane remote control with cable / portable crane control panel -Cable length: 25m -Dimensions: 700/560/H380 mm -Weight: 18 kg

Linear drive, linear gear, screw jack, spindle drive -unused: from warehouse liquidation -Linear drives: with toothed belt -unused: from warehouse liquidation -ravel: 1230 mm -without motor -Dimensions: 500/550/H1900 mm -Number: 5x linear drives available -Price: per piece

General SKUR0811 LocationBarneveld MakeCMR Brevetti Ravinet (Ita) Type2500 ltr No.2010 Year of construction1989 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor3.6 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity3610 ltr (nett. 2500 ltr) Vessel sizesdia.1600mm x 2170mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connections3x DN200, 4x DN100, OutletDN100 Half coil jacketed(140 ltr( Max. temperature-30/200 degr.C With propellor stirrercheck Motor3.6 kW, 380 Volt(EX) Speed mixing shaft235 rpm Information Total height3,4 M Weight1700 Kg Floorspace2,2x2,2 M ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRub ...

General SKUR0823 LocationBarneveld MakeCMR Brevetti Ravinet (Ita) Type16900 ltr Mach.No.1998 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4435 (316L) Nutsche filter/dryercheck Filter surface8 m2 Capacity16900 ltr Vessel sizesdia.3300 x 2250mm Top connections2x DN600, DN200, 4x DN80, 2x DN40 Solids outletDN100 Liquid outlet10x DN40 With jacket(70 ltr) Max. temperature-30/200 degr.C With stirrercheck Motor15 kW, 380 Volt (EX) Stirrer speed8 rpm Cake capacity4000 Ltr Stirrer can be liftedcheck Information Year of construction1988 Total height5,0 M Floorspace4,0x4,0 M Weight8000 Kg ATEX compatiblecheckMinerals & inorganicAPIBiopharmaceuticalAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnolog ...

General SKUR0824 LocationBarneveld MakeCMR Brevetti Ravinet (Ita) Mach.No.1997 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface8 m2 Capacity16900 ltr Vessel sizes3300x2500mm Top connections2x DN600, DN200, 4x DN80, 4x DN50, 2x DN40 Solids outletDN100 Liquid outlet10x DN40 With jacket(70 ltr) Max. temperature-30/200 degr.C With stirrercheck Motor15 kW, 380 Volt (EX) Stirrer speed8 rpm Cake capacity4000 Ltr Stirrer can be liftedcheck MaterialStainless steel 1.4435 (316L) Information Year of construction1989 Mounted on framecheck Floorspace4,0x4,0 M Total height5,0 M Weight8200 Kg ATEX compatiblecheckMinerals & inorganicAPIBiopharmaceuticalAgrochemicalsSolid pharmaceuticsConfectioneryBiotech ...

Used Filling Monoblock OCIM 24 32 8 up to 10000 bph The OCIM 24 32 8 filling monoblock stands as a pinnacle in bottling technology It offers an unparalleled capacity of up to 10000 bottles per hour Crafted by OCIM in 1998 this machinery embodies reliability and efficiency Specifically designed to cater to the demands of filling glass containers particularly those housing oil products Technical Details At the heart of this monoblock lies its rinser equipped with 24 grippers meticulously engineered to ensure a secure hold on the containers Operating with precision the rinser utilizes compressed air for treatment guaranteeing optimal cleanliness throughout the filling process Moving seamlessly to the filler which serves as the core component of the monoblock we encounter a marvel of engineering Boasting 32 filling valves this monoblock is capable of handling even the most demanding bottling ...