Grooving machine RAUSCH RS 6-1300 with extensive accessories -Slide stroke / stroke length max. 1300mm -Pulling force 6000 kg -Operating voltage 380 volts -including 38 x broaching pins -including 95 x guide bushes -Intermediate leaflets -Crane -Workbench -Pedestal -2 x Tool cabinets Dimensions: LxWxH 1.6x1.7x2.3 meters / weight 2000 kg
Key data: 30 kN, 1000 mm
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Title: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Type: RS 30/1000 Machine No.: 3813 Year of Make: 2019 Never put into operation Full documentation without broaching needles Workspace Stroke: 1000 mm Gross tractive force: 30 kN small/large cutting speed: 1.0 – 7.5 m/min small/large return speed: 1.0 – 7.5 m/min Indoors: Tool feeder: by hand/independently Large workpiece Ø: 300 mm Outdoor spaces: fixed/movable/rotatable workpiece clamping plate Area of clamping plate: 255mm x 400mm T-slots: 2 pieces, 14mm wide, parallel/perpendicular to the clamping surface of the tool carriage Accessories/special equipment: Coolant Setup Broaching tool safety Machine hood to protect the working area Area requirement: 0.72m x 1.3m x ...
General / technical data: Manufacturer: Rausch Type: RS6/1000 Year of construction: 07/2000 Machine no.: 60305 Weight: approx. 750kg Tractive force: 60kN (80kN) Clearing speed: 4m/min Return speed: 8m/min stroke: 1000mm Maximum tool length: 1200mm Maximum workpiece diameter: Ø approx. 900mm Table opening: Ø 90mm for standard clearing mandrels Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to the floor without superstructures) Current type: 400 Volt / 50Hz – 6 / 7,5kW Accessories/ Special equipment: – electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) – integrated coolant system with check valve and drain valve – patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is energized in our wareho ...
General / technical data: used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 4000 KG Clearance speed: 3m/min Return speed:6m/min maximum stroke: 1000mm maximum tool length: 1200mm Table area: 450mm x 250mm Table break: 90mm Workpiece diameter: any Dimensions ( h x w x t): 1610 x 630 x 855mm Engine power: 2.2 / 3.5KW Power supply:400 volts 50 HZ Accessories / Optional equipment: - integrated coolant/cutting agent system -electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) - Central lubrication system - CE machine marking Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has a very quiet machine ...
used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 3000 KG Clearance speed: 3m/min Return speed: 3m/min maximum stroke: 800mm Ropcmo87 maximum tool length: 1000mm Table area: 350mm x 220mm Table break-in: 90mm Workpiece diameter: any Dimensions (h x w x t): 1260 x 500 x 720mm Engine power: 1.1 / 1.5KW Power supply: 380 volts 50 HZ Accessories / Optional equipment: - integrated coolant / cutting agent system - Machine documentation Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has been partially overhauled, all bearings, shaft seals and seals of the trapezoidal spindles and gearbox have been renewed. The drawing head is re-ground and adjusted, the machine body is ...
Manufacturer: Noise Model: RS4/1000 machines no.: 5123/706 Year of construction: 4/1989 weight: approx.: 540 KG General information / technical data: used mechanical vertical Innenräummaschineim of very good immediate quiet machine running Zugkraftbei 3m / min: 4000 KG Räummgeschwindigkeit: 3m / min and 5m / min Return speed: 10 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Engine power: 2.2 / 4,7KW Stromversorgung380 Volt 50 HZ Optional accessories: -Kühlmittel / thread cutting fluid pump electric power meter -electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) Comment: The double spindle drive ensures a quiet and central point of the train, as well as a ...
used
General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle drive ensures ...
A Rausch robot-based deburring machine is available. Support height: 1050mm, spindle speed: 50000rpm, power: 1kW, max. burr thickness: 0.2mm, max. workpiece diameter: 500mm, gear types: straight/helical/angled, max. helix angle: 40°, max. chamfer angle: 45°, max. workpiece length over chuck: 450mm, max. workpiece weight: 50kg. Machine dimensions X/Y/Z: approx. 2050mm/1200mm/2100mm, weight: approx. 1300kg, operating hours: 1271h, utilization time: approx. 8h. Documentation available. An on-site inspection is possible.
