We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,106 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
sheet width: 2040 mm plate thickness: 3.0 mm thickness at Niro-steel: 1.5 mm no. of strokes: 50 Hub/min cutting angle: 1.4 Grad table height: 750 mm distance between columns: 2120 mm back stop - adjustable: 1.0 - 550 mm column arm: 100 mm Control: manuell engine output: 5.5 kW weight of the machine ca.: 2050 kg. range L-W-H: 2600 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 1.0 - 550 mm - Machine side stand with projection .. 100 mm - manual cutting gap adjustment - 1x hold-down bar - 1x long side stop - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - 2x EMERGENCY stop buttons at the front - ...
used
sheet width: 2540 mm plate thickness: 2 mm strokes per minute until: 63 throat: 100 mm cutting angle: 1,13 ° table height: 750 mm table width: 320 mm table height over floor: 750 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 3,1 x 2 x 1,3 m Electric 380 Volt: Rear register front operated: 15 - 550 Foot switch: Squaring arm: Support arms: 3 x Motorized guillotine shears in the swing cutting system with adjustable from the front manual backgauge with analogue display and reading optics. Power transmission via gearbox, eccentric shaft and connecting rod on the cutter bar. Less noise level because the gear is only switched on during the cutting process is. Hold-down beam with continuous pressure element made of elastomers material that ensures secure clamping of the sheet metal. The cutting performance refers to 400 N/mm² strength. Ma ...
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket, for notching machine, sheet metal notching machine, notching shear, corner notching machine, corner shear, corner shear -Manufacturer: Raskin, punching unit type 125 NIA 111.163.0 -Punching capacity: 3mm -Dimensions: see photos -Dimensions: 270/200/H150 mm -Weight: 30.5kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg
used
plate thickness: 1,5 mm roll diameter: 76 mm bending speed: 4,7/9,4 m/min total power requirement: 0,37/0,55 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 0,6 x 0,6 m Electric 380 Volt: Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine Type: Guillotine Shears Manufacturer: RAS Model: 54.30 Year of construction: 1975 Condition: very good Offer Type: Used Machine Specifications: Capacity: 1040 x 4.0 mm Drive type: el./mech. Propulsion: 7.3 kW Remark: rip fence, Material supports and stop at the front, 2 spare blades Weight: 2000 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
used
4 columns tool testing press, pressing force 250 tons,
used
45 Number of conrods 2 Table dimensions ( x-y/mm) 700 X 450 Slide Dimensions X-Y (mm) 700 X 360 Stroke (mm) 10 - 50 Light at T.D.C.(mm) 305 Strokes type Adjustable Stroke per minute 80 - 400 Location Germany Machine Conditions Ce Marked
used
Hydraulic tool testing press and small batch press, Nominal force : 400to, Stroke: 600mm , Table surface/ ram surface: 2500 x 1500mm 4200 operating hours, weight: 32to. To be visited under electricity.
used
sheet width: 4040 mm plate thickness: 5,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 9,20 t dimensions of the machine ca.: m • Angle stop 1700 mm • Support arms according to photo • Backgauge controlled 1000 mm • pneumatic sheet metal holding device • automatic cutting gap adjustment • Small parts switch to the front • Control System 2005 • Rear safety light barrier Dimensions: L 4.8 x W 2.20 (plus support arms) x H 1.75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 1250 mm plate thickness: 1 mm pre-bending: - shaft diameter: 56 mm weight of the machine ca.: 170 kg dimensions of the machine ca.: 1,5 x 0,55 x 1 m Manual 3-roller round bending machine with asymmetrical roller arrangement operated with hand crank via wheel transmission, upper roller can be swung out, lower rollers with annular groove, rear shaft adjustable for conical bending, front shaft adjusted via eccentric lever, rear roller adjusted via adjusting lever, rollers crowned. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 3200 mm plate thickness: 2,5 mm weight of the machine ca.: 3,5 t Tools recentely grounded. Bending angle preselection via potentiometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
sheet width: 2040 mm plate thickness: 2.00 mm thickness at Niro-steel: 1.25 mm no. of strokes: 63 Hub/min cutting angle: 1.10 Grad table height: 750 mm distance between columns: 2120 mm back stop - adjustable: 0 - 550 mm column arm: 100 mm Control: manuell engine output: 2.8 kW weight of the machine ca.: 1100 kg. range L-W-H: 2650 x 1980 x 1400 mm Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - manual backgauge, with analogue position display adjustable from the front Continuous adjustment over the entire travel range Adjustment range 0.0 - 550 mm - Machine side stand with projection .. 100 mm - 1x hold-down bar - 1x long side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal slide - Connection cable including plug - original instruction man ...
used
pressure:150 t throat:450 mm stroke:115 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:2250 x 1090 mm table height over floor:900 mm passage to the back:1900 mm ram surface:1900 x 900 mm ram adjustment:100 mm power requirement:16,0 kW weight:19,5 t Dimensions (WxDxH):3,0 x 2,3 x 3,9 m
used
Pressure:150 t stroke:fix 80 mm no. of strokes:30 - 150 /min distance between columns:930 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:880x1300/1500x600 mm hole in the table:760 x 180 mm table height over floor:1270 mm column travel -side:650 mm ram surface:920x1000/1300x600 mm weight:27,5 t Dimensions (WxDxH):3,1 x 1,8 x 4,3 m WITHOUT feeder:can be offered optionally
used
CONTROLS conventional PRESS FORCES total force (nominal): 30 to PRESS TABLE table surface (left-right): 350 mm table surface (front-back): 330 mm SLIDE (MECHAN. PRESS) stroke rate (min.): 250 /min stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS total weight approx.: 3800 kg ATTACHMENTS (PRESSES) decoiler: yes strip feeder: yes feeder type: roll feeder
used
CONTROLS conventional PRESS FORCES total force (nominal): 30 to SLIDE (MECHAN. PRESS) stroke rate (min.): 200 /min stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS total weight approx.: 3600 kg ATTACHMENTS (PRESSES) decoiler: yes strip feeder: yes feeder type: roll feeder
used
Beading machine RAS REINHARDT RAS 12.31 Sheet thickness: max. 1.75 mm projection: 280 mm roll center distance: up to 65 mm , on 85 mm motor: 0.37 kW 380 V with foot switch ! Right / Left rotation switchable used, checked! Dimensions: 830 x 430 x 1350 mm
used
BAP prism light weight L = 1260 B = 325 height 93 mm. = energy-saving reflector only 1x36W VVG. Orginalverpackt, unused, remaining stock. Sale. For OWA ceilings, false ceilings. Info under 0170 / 2204056 E-mail at fa.raupp@t-online
used
Height 1350 Width 1700 mm Length 700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Chamber dimentions 500 mm
used
Palletizer ACMI – mod. RASAR P 135 – automatic: Year: 2001 Producer: ACMI -MACHINE IN VERY GOOD CONDITIONS 1) Machine suitable for cartons and packs 2) Automatic pallet loading system 3) Aquifer system provides automatic 4) Perimeter protection 5) machine with wrapper robopack 2001 -MACHINE TOTALLY RECONDITIONED Code R 2
used
chemical pump, water pump, centrifugal pump JENAER GLASWERK Type: KRS 40 / 120 Ras Capacity: 16 m3/h Delivery altitude: 12 m Material pump housing: Glas Connections ( inner diameter ): Ø 40 mm Motor: VEM KMR 100S2 ( KMR100S2 ) 2,2,8 kW 2890 rpm 220 / 380 V 3AC 50 Hz Ex-proof ! used, tested ! Dimensions: 570 x 255 x 310 mm
used
Chemical pump, water pump, centrifugal pump JENAER GLASWERK KRS 25 / 100 RAS Capacity: 4 m3/h Delivery altitude: 8 m Material pump housing: Glas Motor: VEM KMR 71G2 ( KMR71G2 ) 0,6 kW 2670 rpm 380 V 3AC 50 Hz explosion-proof ! New ! Dimensions: 410 x 190 x 260 mm
used
Pillow block bearing, with insert bearing INA RASEL40-N 2 pieces ! housing: GG. ASE08 Insert bearing: GLE40-KRR-B shaft diameter: Ø 40 mm Dimensions (single bearing): 179 x 43 x 99 mm New ! Dimensions (packaging): 180 x 90 x 100 mm
used
Pillow block bearing, with insert bearing INA RASE50-N 2 pieces ! Housing: GG. ASE10 Bearings: GE 50-KRR-B Shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 63 x 115 mm New ! Dimensions (packaging): 200 x 130 x 120 mm
used
Pillow block bearing, with insert bearing INA RASEY50-N 2 pieces ! housing: GG. ASE10 Insert bearing: GEY 50-KRR-B Shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 52 x 115 mm New ! Dimensions (packaging): 200 x 110 x 120 mm
used
Pillow block bearing, with insert bearing INA RASEL50-N 2 pieces ! Housing: GG. ASE10 Insert bearing: GLE 50-KRR-B Shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 50 x 115 mm New ! Dimensions (packaging): 200 x 100 x 120 mm
used
Pillow block bearing, with insert bearing INA RASE50-N 10 pieces ! Housing: GG. ASE10 Insert bearing: GE 50-KRR-B Shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 63 x 115 mm New ! Dimensions (packaging): 520 x 260 x 120 mm
used
Pillow block bearing, with insert bearing INA RASEL50-N 2 pieces Housing: ASE10 Bearings: GLE 50 KRRB FA115 Shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 50 x 115 mm New ! Dimensions: 200 x 100 x 120 mm
used
Pillow block bearing, with insert bearing INA RASE50-N 2 pieces Housing: ASE10 Insert Bearing: GE 50 KRRB Shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 63 x 115 mm New ! Dimensions: 200 x 130 x 120 mm
used
Pillow block bearing, with insert bearing INA RASEY60-N housing: gg. ASE12 Bearings: GYE 60 KRRB shaft diameter: Ø 60 mm New ! Dimensions: 240 x 60 x 140 mm
used
Pillow block bearing, with insert bearing INA RASE25-N 10 pieces ! Housing: GG. ASE05 Insert bearing: GL25-KRR-B shaft diameter: Ø 25 mm Dimensions (single bearing): 132 x 45 x 75 mm New ! Dimensions (packaging): 265 x 225 x 80 mm
used
Pillow block bearing, with tension bearing INA RA SE70 housing: GG. ASE14 Tension bearing: GE 70-KRR-B shaft diameter: Ø 70 mm New ! Dimensions: 260 x 65 x 156 mm
used
The scope of delivery includes: 01x Folding box / folding box, used Manufacturer: SSI Schaefer Type designation: FK 6220 Material color: blue External dimensions: 600 x 400 x 220 mm (LxWxH) Internal dimensions: 570 x 370 x 215 mm (LxWxH) Dimensions folded: 600 x 400 x 70 mm (LxWxH) Volume: 45 l Weight: 2.44 kg/pcs. Material: Polypropylene Handles: open on the front wall side Side Type: Closed Bottom Finish: Smooth, Closed It is a second-hand item, there may be scratches, dents and traces of use exist. General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery.
used
Fold former, folding machine, form folding machine, profiling machine, profiling system -Transfer: in the current condition as seen -Machine: has no motor and is therefore sold as a spare parts carrier -Profiling stations: 7 pieces -Sheet thickness max: 1.5 mm -max web height: 20 mm -1x set of rollers: -Work shaft diameter: Ø 28 mm -Center distance of the working shafts: -vertical: mm -horizontal: mm -Dimensions: 1460/740/H1050 mm -Weight: 352 kg
used
properties: Used roller conveyor folding element Condition: fully functional with traces of usage Expertly dismantled and packaged Price per pc. Technical data: Dimensions of the flap Total length: 1.180mm Total width incl. feet approx.: 670mm Conveyor width: 460mm Min. height top edge roll: 570mm Axle spacing: 75mm Roll diameter: 50mm In stock: 3 pieces Price per piece Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for compani ...
used
From one place in germany: folding machine Manufacturer: Faltex A3 4 bags Price: on request Collator Manufacturer: UCHIDA A3 8 stations Price: on request Package Price: on request
used
Antike Falzmaschine - Antique Machine folding machine Brehmer 1/504 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
A Theisen & Bonitz with 10 stations and HFS is offered. Format 35 X50 cm, 30 cm stacking height Pictures and further information on request.
A Theisen & Bonitz with 10 stations and HFS is offered. Format 35 X50 cm, 30 cm stacking height Pictures and further information on request.
used
Folding machine HELMUT LOTZE 3100×9 CNC (A3709) Max worklength 3100 mm Max tickness 9 mm Distance between clampblock — ram 300 mm Eletric motor (power) 15 kW Length 5050 mm Depth 1875 mm Hight 2040 mm Weight 15 ton ACCESORIES yes Additional info Type 116 Mechanical drive Cybelec CNC control Cap: 2500 x 10 mm / 2000 x 12 mm
used
1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery
used
Size: 520 mm Equipments: 1x 1.ST Nr. 3 gate fold 4 Folding units for Heidelberg Stahlfolder TI 52 1st Unit 1x 1.ST Nr. 2 gate fold 1x 1.ST Nr. 4 gate fold 1x 1.ST Nr. 1 gate fold
new
DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°
R25532/08W Cosmos Vega Folding Carton Gluing Machine Model: 145 Built: 2003 refurbished 2010 for corrugated board Available: immediately
R25591/08V KECK Folding Carton Adhesive Machine Model: SF 80 Built: 1990 Availability: instantly Unused: 800 mm Fasson glue work from the cliché Longitudinal cross-gluing, selective - Striped glue for 1 x longitudinal bonding, cliché glue for cross-gluing Still in operation: Yes Available: immediately
used
4 + 4 bags Sniffer Output Available: Immediately
used
folder Creaser adhesive machine Double fold head, 1 for perforation use as an option 3 Foldable Pockets + Gate Folds Adhesive system Format 50x100cm up to 480 grams Machine very suitable for covers with flaps, heavy bearing gate folding brothel etc. optional bag foldable possible MHGraphics is a Fidia dealer. We organize installation and instruction of trained mechanic Verf Gbar: immediately / Instant