ras 73 used for sale

Marchesini RIBATINO RIB. 730 turning conveyor for folding cartons, belt width 70 mm, electrics 1x220V+N+PE/50Hz, max. absorbed power 2 A, max. trip out value 6 kA, machine floor space approx. 1300 x 700 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 120 kg

Inv. Num. : 8328 Type: KMX 732 evo Producer: MANURHIN Created: 2013 Parameters: Control system: FANUC Operating hours: 20723 h Max. rod diameter: 32 mm Number of Spindles: 7 plus 2 pieces Maximum spindle speed: 10000 1/min Spindle bore: 37 mm Spindle stroke: 410 mm Weight: 4500 kg Equipment: Collets Bar Feeder Ducts (21 and 13 mm) Telescopic reduction inserts (inner diameter 21 and 13 mm)

Machine for punching and sharpening belts at the same time

GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A

pressure: 3 - 6,5 kg / cm² bar rate of flow: 26 l/min diameter of die - min./max.: -- mm Ratio: 73 : 1 rated current: 1,65 KW weight of the machine ca.: 100 kg dimensions of the machine ca.: 730 x 760 x 1200 mm noise level: 78 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heftköpfe für Sammelhefter - Stitching heads for Saddle Stitcher Polygraph Heftköpfe 731 - 745 - 750 Serial-No. 731-745-750

HAVE A GDY SIR; WE VE 3 PCS USED WOODWARD 733 CONTROL UNITS. AT OUR STOCK PART NO 8237-1177 REVISION B 3PCS WE 1 PC USED WOODWARD LS-5 CONTROL UNIT PART NO 8440 - 2077 A IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

feed pressure: 10,0 bar intake capacity: 727 L/min Effective free air delivery: 582 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 4,0 kW weight of the machine ca.: 91,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed, 2-stage compressor block - with 2 cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directi ...

GUK FA 21/4 S2 SVA/730 stand-alone leaflet folding machine, 4 folding pockets, sheet format unfolded: min. 60 x 90 mm, max. 215 x 320 mm, smallest folding 15 mm, recommended paper weight 50-70 g/m², automatic drum suction feeder SVA/730, PCE barcode reader, double sheet control, output up to 460 folds/min., infinitely variable drive, electrical connection 400V/3Ph/50Hz, rated power consumption 1.76 kW, machine footprint approx. 1650 x 1075 mm (LxW), machine height approx. 1470 mm, machine net weight approx. 300 kg, machine in mobile version on wheels

Offer a stator winding machine Schümann. Winding speed: 50 / 63 / 100 / 125 turns/min Voltage 380V

Rexroth Bosch MA4/200-7301-M Control Unit 1070079888 GA1 Robot Controller Module Item condition: Used, in perfect condition R14A1_PD(BOR) You can find more control units - new and used - in our shop! International shipping costs on request!

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 735 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 739 , Generator Hz: 60 , Generator Volts: 380/220 , Generator Amps: 1234.5 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/mtu-12v2000g42-generator-739-k va-used/371, , = More information =, , Empty weight: 8.500 kg, Type number: 12V2000G42 GENERATOR 739 KVA

x-travel: 730 mm y-travel: 850 mm z-travel: 560 mm control: Mazatrol Matrix Main spindle:: turning speed range - main spindle: 35 - 10.000 min/-1 power capacity - main spindel: 30 / 22 kW tool taper: SK 50 Tool changer: 30 pos. size of pallet: 630 x 500 mm workpiece weight max.: 500 kg A-Axis: -120 ~ +30 ° C-Axis: 360 ° rapid traverse ( X / Y / Z ): 42 m/min total power requirement: 64 kVA weight of the machine ca.: 19 t dimensions of the machine ca.: 5,5 x 2,69 x 3,5 m 5-axis simultaneous machining centre: - 5-axis CNC control Mazatrol Matrix & handwheel - NC Rotary Table swivable - 30-fold tool changer (SK 50) - IKZ 20 bar - Chip conveyor - Renishaw RMP 600 Operating/switch-on hours: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertices: • Compensation choke from a well-known German manufacturer • Currently available directly from the manufacturer – no waiting for production • Fast and uncomplicated delivery • Ideal for time-critical applications or ongoing projects • Warranty for devices is 5 years (starting 01.06.2025)

cutting diameter: - mm saw band length: - mm cutting width: - mm table - swivable: ja Grad weight of the machine ca.: 200 kg dimensions of the machine ca.: - m with welding equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This panel saw was manufactured in 2011. It features a maximum panel width of 4500 mm and length of 2200 mm, with a saw blade projection of 127 mm. It includes a lifting table, 9 grippers on the sliding stop, and flexible grippers for NC positioning. The saw unit supports a tool diameter up to 470 mm and operates with a motor power of 18.5 KW. Consider the opportunity to buy this SELCO WNTR 730 panel saw. Contact us for more information.

Description The Krones Checkmat 731 (built in 2016) is a high-performance inspection system for quality control in beverage filling lines. The machine reliably checks the fill level, closure, label presence and other quality-relevant parameters. Thanks to its seamless integration into Krones' high-speed lines, it ensures consistent product quality and efficient rejection of defective containers. Specifications Manufacturer: Krones Model No.: Checkmat 731 Year 2016 Condition Used Stock number 103822 Current type and system AC 1/N/PE Voltage 230 V Frequency 50

Large pizza oven, manufactured by Pizza Master, model PM 731 E. 400V, 50 Hz, 9,5kW

Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...

General SKU327X688 MakeM. Roth LocationBarneveld CEcheck Type735 l Pressure Working pressure4 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume735 Ltr. Motor0.25 KW Vacuumcheck Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Closed stirring vesselcheck Capacity735 l. Vessel sizesø 800 x 1600 mm Dished bottomcheck Manholecheck DN400 Top connectionscheck Outletcheck DN25 with valve Max. temperature144 °C With propellor stirrercheck Motor0,25 kW, 415 V, 1355 rpm, (Ex) Speed mixing shaft75—500 l./min Information No.B650 Year of construction2008 Mounted on legscheck Floorspace0,80 x 0,80 m Total height2,60 mStirring vesselsM.rothStirring vessels > Stirring vesselsBrand > M.roth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any  ...

General SKU327X687 MakeM. Roth LocationBarneveld CEcheck Type735 l Pressure Working pressure4 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume735 Ltr. Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Closed stirring vesselcheck Capacity735 l. Vessel sizesø 800 x 1500 mm Dished bottomcheck Manholecheck DN400 side manhole Top connectionscheck Outletcheck DN25 with pneumatic valve Max. temperature144 °C Without motorcheck Information No.B654 Year of construction2008 Mounted on legscheck Floorspace0,80x1,00 m Total height2,40 m Weight430 kgStirring vesselsM.rothStirring vessels > Stirring vesselsBrand > M.roth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 160 mm -Function: double-acting -Piston tube outer diameter: 190 mm -Piston rod: Ø 100 mm -Stroke: 730 mm -Total length when retracted, center of mount to center of hole: 430 mm -Piston rod mounting: Ø 100 mm -Cylinder mounting: Ø 110 mm -Thread for screw-in fitting: G3/4 -Hydraulic fitting: 20S -universally applicable: can be used -Number: 2 cylinders available -Price: per piece -Dimensions: 1530/430/H270 mm -Weight: 250 kg/piece

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with return filter, pressure regulating valve and level indicator -Filter: EPE Eppensteiner type RL601 P= 16 bar -Pressure regulating valve: Bosch 0811 101 177 -Tank capacity: approx. 420 liters -Dimensions: 1870/730/H1070 mm -Weight: 278 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: internal grinding spindle -Drive motor: BBC 1.5 kW / 2870 rpm -Spindle speed: approx. 9800 rpm -Shaft axis: adjustable max. height 460 mm -Recording/Dimensions: see photos -Total dimensions: 730/400/H535 mm -Weight: 105 kg

hydraulic motor, oil motor, hydraulic pump -Manufacturer: GSL (German Standard Lift), Hydraulic pump for driving work platforms -Type: 730-0080-130-002 -Drive shaft: Ø 25 x 40 mm -universally applicable -Number: 1x engine available -Price: per piece -Dimensions: 240/135/H130 mm -Weight: 13.2 kg/piece

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Stralfors, side channel blower with control box and filter -Type: 739641 704793-04 -Serial No: 04-BLOW-16 -Drive: Emerson Electric 250W -Speed: 2850 rpm -Individual components: see photos -Dimensions: 460/370/H310mm -Weight: 20kg

Wheel loader mount, adapter frame, universal carrier -Wheel loader mount: adapter frame, solid design -Inner mounting width: 680 to 730 mm -Mounting: shaft Ø 50 mm, dimensions see photos -Forks: can be supplied at an additional cost, large selection available -Dimensions: 1500/340/H660 mm -Own weight: 104 kg

pressure reducer, pressure regulator, bladder accumulator, high-pressure bladder accumulator, hydraulic accumulator, pressure accumulator, diaphragm accumulator -Manufacturer: Olaer, pressure accumulator -Type: 140-7315-533-611 -Operating pressure: max. 210 bar -Volume: 1.4 L -Dimensions: Ø 150 x 295 mm -Weight: 4.4 kg

Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV Lenze, clamping cylinder stroke 20 mm -Type: 40 TGL 30-7312 -Shaft Ø 25 mm -Number: 8x clamping cylinders available -Price: per piece -Dimensions: Ø 70 x 133 mm -Weight: 2.8 kg/piece

Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV Lenze, clamping cylinder stroke 25 mm -Type: 63 TGL 30-7312 -Shaft Ø 32 mm -Number: 4x clamping cylinders available -Price: per piece -Dimensions: Ø 90 x 160 mm -Weight: 5.2 kg/piece

Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WMW, clamping cylinder stroke 30 mm -Type: 40 30-7311 -Shaft Ø 20 mm -Number: 4x clamping cylinders available -Price: per piece -Dimensions: Ø 55 x 160 mm -Weight: 1.8 kg/piece

Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WMW, clamping cylinder stroke 15 mm -Type: 25 30-7312 -Shaft Ø 14 mm -Number: 12x clamping cylinders available -Price: per piece -Dimensions: Ø 50 x 96 mm -Weight: 1.2 kg/piece

Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks, hydraulic cylinders -Manufacturer: WMW, clamping cylinder stroke 20 mm -Type: 25 TGL 30-7311 -Shaft Ø 14 mm -Number: 16x clamping cylinders available -Price: per piece -Dimensions: Ø 35 x 127 mm -Weight: 0.6 kg/pc.

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dollies, double turntable steering, heavy-duty trailers -Heavy-duty transport vehicle: Industrial trailer with 1-axle turntable steering -Platform: 7310/1100/H460 mm -Load capacity: 12 t -Tires: Continental Elastic 525/120-3 solid rubber twin tires -Dimensions total: 8380/1290/H1425 mm -Weight: 1150 kg

for glass scale, scale, digital display, measuring rod, length measuring system, linear scale, fluorescent display, glass scale, scale, length measuring device, linear scale, positioning display, digital scales, digital scale -Manufacturer: RSF Elektronik, digital display from coordinate measuring machine Stiefelmayer C 100 413514 -Type: Z 735M -Dimensions: 275/120/H170 mm -Weight: 3.4 kg

Manufacturer: IMA, Type: BIMA G X60 R 160/730, Year: 2012, Control: IMA Woop, Software: ICOS CNC, Work piece width min-max mm: 1600-2000, Min.-max. workpiece length in mm: 7000 oder 2 X 2900, Min.-max. workpiece height in mm: ca. 250, Working range X: 7300, Working range Y-axis: 1600-2000, Working range Z: 500, C axis: yes, B-axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1600-2000, Min.-max. workpiece length in mm: 7000 oder 2 X 2900, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 16, rpm 1): 0-24000, Number of tool changers: 2, Tellerwechseler: 18-fach und 2 fach, Vertical drills-X: 11, Drill vertical Y: 11, Horizontal drills-X: 2, Drill horizontal Y: 3, Traverse table: 8, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 140,  ...

Volvo TAD 734 - Used - 250 kW - 250 hrs

Engine Brand: MWM, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 762 Kw, Rated Speed: 1500 Rpm, Generator KVA: 738 , Generator Hz: 50 , Generator Volts: 400/231 V , Generator Amps: 1065 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6709, , = More information =, , Type number: TBG620V12 GENERATOR 738KVA

Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation

Engine Brand: MWM, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 762 Kw, Rated Speed: 1500 Rpm, Generator KVA: 738 , Generator Hz: 50 , Generator Volts: 400/231 V , Generator Amps: 1065 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/mwm-tbg620v12-generator-738kva -used/264, , = More information =, , Type number: TBG620V12 GENERATOR 738KVA

Engine Brand: DEUTZ, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Working Hours: 999999 Hour(s), Engine Condition: Core , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 762 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 738 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 1065.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-a05i450710-generator- 738-kva-used/612, , = More information =, , Empty weight: 9.500 kg, Type number: A05I450710 Generator 738 KVA

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 oxygen sensor OD Accuracy: ±0.5% OD Concentration: 0.00 - 20.00 / 0 - 90 mg/L Dissolved oxygen - saturation: 0.0 - 200.0 / 0 - 600% (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature range: 0.0...+50.0 °C Temperature accuracy: ±0.1°C Power supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode/5000 in automatic mode In good condition

Electric motor, three-phase motor with 2 speeds -Power: 1.6/2.2/6.6 kW -Speeds: 730/980/1460 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP 54 -pole changing -Dimensions: 595/385/H310 mm -Weight: 105 kg

Shunt motor, three-phase motor, electric motor, -Power: 28/6.5 kW -Speed: 1470/735 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 710/480/H385 mm -Weight: 164 kg

Three-phase motor, electric motor -Power: 13/19 kW -Speed: 730/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 670/357/H440 mm -Weight: 198 kg

Electric motor, three-phase motor -Power: 5/7 kW -Speed: 735/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 EX -Brake: with temperature sensor -Dimensions: 920/400/H330 mm -Weight: 175 kg

Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hex head screws: M20 x 170 73 Box of 10 pcs. -Quality: DIN 931 8.8 galvanized -Manufacturer: Reyher -Price: complete -Total weight: 381 kg

electric motor, three-phase motor -Power: 32/46 kW -Speed: 730/1470 rpm -Shaft: Ø 55 mm -Design: B3 -Protection rating: IP55 -Quantity: 1x motor available -Dimensions: 970/630/H520 mm -Weight: 465 kg

Electronic module, coordinate measuring board ZEISS 608483-9103.730 608483-9003 spare part for 3D coordinate measuring machine ! used, tested ! Dimensions: 235 x 180 x 15 mm