129,235 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
servocontroller for Rapid DGL double mitre saws we can deliver this controller suitable with firmware and parameters "plug and play" for all Rapid DGL machines with controller system PCE5000 new- or reparied units with 2 years warranty Contact us for more information
Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm
RAPIDMIX – MOBILE CONTINUOUS MIXING PLANT Rapidmix is a high-capacity mobile mixing system developed over two decades of engineering. It delivers accurate, reliable continuous mixing for large construction and civil projects. With output options of 400 TPH or 600 TPH, the plant provides outstanding productivity and cost efficiency. Fully self-contained and hydraulically erected, Rapidmix moves easily between sites and is ready for operation within minutes. The built-in weighing system ensures precise measurement and process control for all materials. KEY FEATURES • Mobile continuous mixing plant • Output options: 400 TPH and 600 TPH • Integrated weighing system for all materials • Onboard 6-cylinder diesel generator • Hydraulic setup for fast commissioning • Single-load road-towable transport • Automated control system with 15" touch-screen HMI • 40-tonne onb ...
TRAKMIX – MOBILE CONTINUOUS MIXING UNIT First introduced in 2015, Trakmix is a tracked mobile continuous mixing unit designed for rapid deployment and high-volume production. Its tracked undercarriage eliminates the need for transportation permits, allowing easy movement between sites. Capable of producing up to 250 TPH, it delivers precise and consistent mixing for a wide range of construction applications. The unit is fully self-contained and can be set up in minutes via remote control, with complete weighing of all materials for operational accuracy. KEY FEATURES • Tracked undercarriage for ultra mobility • No transportation permits required • Continuous mixing capacity up to 250 TPH • Self-contained unit with onboard diesel generator • Integrated silo, hopper, mixer, and control panel • Rapid remote-controlled setup • Full weighing capability for all material ...
RAPID RECLAIMER – CONCRETE RECOVERY UNIT The Rapid Reclaimer is a dedicated recovery system for unused concrete. It separates and recovers washed-out sand, aggregate, and grey water, providing an efficient recycling solution for concrete production sites. The unit is capable of processing up to 20 m³ of slurried concrete. FEATURES • Rugged, one-piece, all-welded mild steel construction • Integrated control panel • Built-in overload protection Find more here - / Contact us at -
Key data: 500 mm
The Double mitre saw Manufacturer: Rapid Maschinenbau Type: DGL 220 S/N: 007501159 Year of Make: 2021 Tool size: max. 500 mm Weight: 1500 kg Working pressure: 6 bar Control cabinet with control panel, touchscreen version mobile single-bag dust extraction Höcker Polytechnik Gr 3, Year of manufacture: 2020, Suction nozzle diameter: 160 mm, Engine power: 2.2 kW is part of the ONLINE AUCTION of the Operating and office equipment of a window construction company approx. 400 positions best. e.g. from: Hegla Maschinenbau GmbH & Co. KG LPLF Q15F, processing line for plastic profiles for window frames and frames Schirmer Maschinen GmbH, sash/frame assembly line Urban GmbH & Co. Maschinenbau KG, semi-automatic hardware assembly line Urban GmbH & Co. Maschinenbau KG, glass assembly line, glazing bead assembly line Urban GmbH & Co. Maschinenbau KG, manual vertical hard ...
Groove milling machine rapid Contur380 Cmhight VoltTisch 220 x 1000 mmTiefe 150 Cmwidth 150 140 cmNutlänge of 10-200 mmNutbreite 3-25 mmGuter condition fully functional
Rapid Original TRM 350 Quick Release Holder type TRM350 Indexing 0.005 With 7 alternating necks 4 Pcs 201/350 34mm 1 St 202/350 Prima 32mm 2 Pcs 216/350 Diameter 50mm
The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Tiller head, control panel, control unit, steering, steering unit -Manufacturer: Rapid, control panel steering completely from electric stacker RVT 2500 -Number: 1x drawbar available -Price per piece -Dimensions: 720/420/H180 mm -Weight: 14 kg/pc.
Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Rapid, chassis drive motor faus electric stacker RVT 2500 -Drive motor::LS Leroy Somer type T15 24V 2.0 kW -Motor brake: Lenze -Individual components: see photos -Dimensions: 290/285/H700 mm -Weight: 76 kg
RAPID 4535 Granulator 3 fly 2 dead blades 2 x Screens 1 x Frame Safety system Spare set of blades
Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,
Manufacturer: Rapid, Type: Kettenstemmer, Year: ca.1980, Min.-max. workpiece height in mm: 200-1200, Vertikal moulding unit: 1, Motor kW: ca.1,0, Travel top to down mm: 150, Travel longitudinal mm: ca.300, Max door width mm: 1200, Max. mortise hole dimensions L X W X D mm: 150 X ca.300, Drill spindles: 1, Face plate aggregate: no, Key hole boring aggregate: no, Year :ca.1980
Separator - S+S Rapid Vario FS70 Year of Make: 2011 Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible.
Granulator Rapid- G15035-DT (3 pcs.) Year of manufacture: 2013-2014 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the sieve - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Separator - S+S Rapid Vario FS70 Year of Make: 2011 Location: Lodz, Poland Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Stock# UG6393 Used cutting mill by Rapid (SE) model G200-48 KURF. Mill is driven by 7.5 kW, 1470 rpm, 230-400 V, 50 Hz. Main feeding inlet has dimensions: 480 mm x 230 mm. Mill has also additional side feeding inlet for work on profiles. Rotor has bolted 12 knives, on side walls of milling chamber there are bolted two static knives. Bottom discharge via screen (10 mm) through blower, cyclone into the collection station.
General SKU439X1391 LocationBarneveld CEcheck MakeRapid Main Features Motor5.5 KW Inlet diameter200 mm Width360 mm Specified Features - Granulator Granulatorcheck Rotor diameter200 mm Number of rotor knives3 With hopper360x200 mm Inlet360x80 mm Motor5,5 kW, 415 V Rotor speed260 rpm With fancheck MaterialMild steel, Stainless steel Information Type2036-KUP No.380.173 Year of construction1999 Mounted on wheelscheck With switchcheck Floorspace1,7 x 0,80 m Total height1,90 m Weight550 kg Extra SpecificationsWith suction unitGranulatorsRapidMills > GranulatorsBrand > Rapid What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU299S435 MakeRapid (S) LocationBarneveld CEcheck Type205-A Main Features Motor4 KW Inlet diameter200 mm Width220 mm Specified Features - Granulator Rotor width225mm Rotor diameter180mm Open rotorcheck Number of rotor knives3 Inlet290x230mm (1x) , 400x280mm (1x) Hinged topcheck Motor4 kW 230/400 volt Feeding with screwcheck Motor1,5 kW 220-240/380-420 volt With fancheck Motor0,14 kW 220/380 volt MaterialMild steel Information No.25.5833 Year of construction1996 Mounted on wheelscheck With switchcheck Floorspace1,8x1,1 M Total height1,5 M Weight400 KgGranulatorsRapidMills > GranulatorsBrand > Rapid What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...
This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine.
Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SSB, gear motor from automatic saw, drill and mill Rapid DGL / BFA -Type: DSG-012 / 20-0410.208.40 - K1 - B5 -Gearbox: Type 012 i = 6.98 -Speed: 380/40 rpm -Power: 0.75 kW -Construction: B14 Hole circle: O 100 mm (O10 mm) - Shaft: O 20 x 40 mm -Protection class: IP 44 -Brake: 24 V 1.3 A. -Dimensions: 515/230 / H170 mm -Weight: 22 kg
Electric motor, three-phase motor -Manufacturer: Himmel, electric motor from saw-drill / milling machine Rapid DGL / BFA -Type: 2 HR 80 -Power: 1.3 kW -Speed: 2820 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 270/200 / H250 mm -Weight: 11 kg
Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height: 70 mm (max. ca. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° -Chip extraction: with gate valve for connection to a central extraction system -Dimensions 1020/850/H1300 mm -Weight: 188 kg
Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm -Weight: 162 kg
Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg
Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 850/850/H1310 mm -Weight: 176 kg
Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg
New. Unused. Adjustable. Dismantled. Inner diameter passage: 155 mm Total height: 190 cm
0: 4000,5000 mm Working height: 120 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CATALOG NUMBER 6631 TECHNICAL DATA - 285x305mm loading hopper inlet - 7.35kW engine - number of knives 3pcs + 2 counter knives - knife size 300x75mm - sieve (2 types) 10mm, 8mm - diameter of the extraction nozzle 100mm - dimensions length / width / height 1070x900x1980mm - weight 613 kg ADVANTAGES - Swedish production - additional sieve - very good condition - used chipper Net price: PLN 22900 Net price: EUR 5089 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)
Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg
Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm
Notching milling machine -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm
Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Pneumatically adjustable angle between 45° and 90° Pneumatic material tensioners Suction Max. saw blade diameter: 500 mm
Max. saw blade diameter: 500 mm Infinitely adjustable hydropneumatic saw blade feed Pneumatic material tensioners Weight: approx. 450 kg
WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM S. No.: 5950798 Equipment / Additional information: With heating Also very interesting for the textile industry
This grinder has 2 fixed knives and 15 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.
Description Inlet size: 450mm x 350mm Cutting Chamber Size: 450mm x 380mm Engine power: 18.5 kW Rotating blades: 3 Fixed blades: 2 Grid hole size: 8 mm Drawer Material: Drawer New grille and belts, ground blades New grille and belts, ground blades
This grinder has 2 fixed knives and 12 rotating blades. The motor power is 2.2 kW. The grid is replaceable, so the grain size can be changed. Everything works perfectly, motor, bearings, rotor, knife are fine. It's ready to use. I have several of them. There are also other document shredders for sale. Please also see my other ads.
Power: 55 kw Shredding field: 1300 x 700 mm Equipped with 2010 mat dimensions: 3000 x 1300 mm Excellent blown product mill
Serie: 2070 Zaagbladdiameter: 500 mm Maximale snelheid: 2800 tpm Gewicht: 320 kg
