rapide used for sale

Rapidex 476 stitcher

external diameter: 110 mm bore diameter in mm: 32 mm width: 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 100 mm bore diameter in mm: 32 mm width: 120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 131 mm bore diameter in mm: 38 mm width: 151 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for fully automatic grinding of all known tooth geometries (e.g. flat, alternating, trapezoidal tooth) from HM – circular saw blades on the face and back in one clamping. The free programming also allows the Machining of special tooth shapes. Accesories: Pallet loader with 3 stations,, Coolant system with total enclosure,, Integrated hollow tooth grinding device,, Software package W 1 alternate tooth,, Software package W 2 flat tooth,, Software package W 3 flat/trapezoidal tooth (with tooth height difference),, Software package W 4 flat / roof tooth (with tooth height difference),, Software package W 5 trapezoidal tooth,, Software package W 6 pointed on one side,, Software package W 7 tooth face processing,,, Software package W 8 free programming of special tooth forms,, automatic tool positioning axis, Automatic D-axis for machining chip breaker grooves, auto. fire extinguish ...

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good  ...

Code 171314 Description Controlled rapide radialdrilling machine Make DONAU Model DANUMERIC 340 Serial No. 6110 – 3 Year 1995 Control Donau Drilling cap. in St. 60 in full 40 mm Drilling cap. in Castiron GG 22 in full 50 mm Thread cutting in St. 60 M 36 Thread cutting in Castiron GG 22 M 45 Spindle taper ISO 40 Spindle speeds stepless 15 - 2800 rpm Quill movement 200 mm Feeds stepless 5 - 2000 mm/min Min/max radius of spindle 540 / 1590 mm Working surface table 1800 x 600 mm Min/max height spindlenose / top of table 85 / 695 mm Motor 5,5 kW 400 V Dimension 1800 x 2500 x 2300 (2700) mm (L x W x H) Weight 2900 kg Accessoiries Position controlled in X – Y – Z and spindle Coolant Machine can also be used without control Condition Machine is in very good condition

Code 0736 Description hydraulic surface grinding machine Make ORION ( HAHN & KOLB ) Model 308 Serial No. 5128 Year 1978 Tablesize 1520 x 300 mm Table grinding size L x B x H 800 x 350 x 500 mm Magnetical plate size L x B 800 x 300 mm Speed table movement 2 - 30 m/min. Rapide vertical movement 0,4 m/min Max. distance table – centre grinding wheel 640 mm Max Grindingstone diameter x Wide x Taper 300 x 50 x Ø 76 mm Spindel power 5,5 and 7,5 kW Spindel speed 1440 and 2880 rpm Weight 3500 kgs Motor power 5,5 / 7,5 kW – 380 Volt Accessoiries Elec. Magneticplate 800 x 300 mm Coolant Condition Machine is in good condition

Code 4925 Description Surface grinding machine Make ELB Model OPTIMAL 1 VA II Serial No. 180730982 Year 1982 Tablesize 900 x 250 mm Table grinding size L x B x H 600 x 300 x 250 mm Magnetical plate size L x B 500 x 250 mm Speed table movement 1 – 25 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 500 mm Grinding stone dim. Stone x Wide x Taper 300 x 50 x Ø 75 mm Spindel power 3,7 and 4,5 kW Spindel speed 1400 and 2800 rpm Weight 3500 kgs Motor power 3,7 and 4,5 kW – 380 Volt Accessoiries Elec. Magneticplate 500 x 250 mm Coolant with paperfilter 2 x DRO Grinding stones, etc. Condition Machine is in good condition

Code 61047 Description Hydr. Surface grinding machine Make ALPA Model RT 1000 Serial No. 53377 Year 1985 Tablesize 1200 x 300 mm Table grinding size L x B x H 1000 x 350 x 400 mm Base size L x B 1000 x 300 mm Speed table movement 3 – 40 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 600 mm Grinding stone diam. Stone x Wide x Taper Ø 400 x 50 x 127 mm Spindel power 8,8 kW Spindel speed 1460 rpm Weight 3000 kgs Motor power 8,8 kW – 380 Volt Accessoiries Magneticplate 1000 x 300 mm Coolant Grinding stones, etc. Condition Machine is in normal condition

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 180 to Total stroke: 150 mm Rapide stroke Execution: 4 columns Table surface: Length: 800 mm Width: 500 mm Distance from table to slide-nose: min.: 540 mm max: 690 mm Passage between columns: longitudinal: 460 mm Lateral: 260 mm Min. stroke: 16.6 mm/s Max. stroke: 83.3 mm/s Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Necessary air quantity Machine´s weight about: 5000 kg Overall dimensions machine: Length: 2000 mm Width: 1800 mm Height: 3500 mm Various accessories: Lower extractor

This is a Hammer Mill from Nuova Guseo Italy in great working condition. This Griding Machine, has been recently been refurbished and works perfectly for many applications. 15kw Motor 9 X 4rows = 36pieces of hammers with 6mm thickness Hammers can be turned and used 4 times to all 4 sides Amperage indication on the panel 10 different sieves (9 in the photos one is installed) with diameter Φ1.5mm, Φ2mm, Φ8mm, Φ15mm, Φ16mm, Φ22mm, Φ25mm, 2pcs X Φ30mm. HAMMER MILL – SERIES RAPIDE Between all size reduction equipment, hammer mills are more widely used than any other to grind minerals and fodder. Now thanks to some special features of the mills series RP, they can be used in foodstuffs and chemicals industries too. Of simple, yet robust design, the hammer mills are suitable to meet the most medium size reduction requirements. They can be used to mill various mater ...

Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition

Furnacce 1200 hardness tester 300x300x500 mm Temperature max 1200C Ölbrenneranlagen Retortenöfen Teil Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen Tunnelofen Haubenofen Schachtofen Sonderanlagen Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmaschinen Drehherdöfen Doppelkammeröfen buerstlein Draht Glühöfen Durchlauföfen zirlguss Elevatoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herd ...

Code 0733 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 4 MA S/N 2204-1372 Year 1987 Control Grundig - Contour 2 Table 800 x 460 mm Longitude ( X – axis ) table 485 mm Vertical ( Y – axis ) table 380 mm Cross ( Z – axis ) spindle 385 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 63 - 3150 rpm Feeds X-Y-Z 2 - 3000 mm/min Rapides 3 m/min Spindle motor 3,7 / 4,4 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Agitator,stainless steel,Rapidex,for mounting in top flange,D 100 mm 3-bladed propeller.

Code 221213 Description Centrelathe Make P.B.R. Type T - 450 Serial No. 45 / 216 Year 1983 Distance between centers 2000 mm Swing over bed 920 mm Swing in gap 1200 mm Swing over support 630 mm Spindle bore 130 mm Number of spindle speeds 24 Spindle speeds 5 - 1000 rpm Feeds Long, cross and toolpost Rapides Long, cross and toolpost Motor power 22 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries Cooling equipment Lubrification Fixed steady of 400 mm Toolpost 3 jaw chuck of 500 mm Condition Machine is in good condition

Code 4923 DESCRIPTION Universal milling machine Make DEBER Model FU 1 Serial No. 228 Year Table 1250 x 300 mm Longitude table 750 mm Vertical table 405 mm Cross table 240 mm Spindle taper 40 ISO Speeds 40 - 2000 rpm Feeds X-Y-Z 14 - 700 mm/min Rapides 1 and 2 m/min Spindle motor 5,5 kW - 380 Volts Weight of machine 2000 kgs Accessories universal millinghead ( 2 x turnable ) Coolant Condition Machine is in very good condition

A description of the machine: RECORD 125 NESTING CNC machining centre with loading and unloading for milling, cutting, clearing, drilling, etc. The machine for sale has recently been taken out of service. It is in good working order. A twin machine can be seen on site, only the spindle is different between the two machines. Model RECORD 125 NESTING Power supply 400V - 50/60 Hz X-Y-Z axis travel 3700x1720x400mm X-Y-Z axis speed up to 80-55-22m/mn Real part passage (light) 335(310)mm OSAI system Water-cooled ELECTROMANDRIN power supply Electromandrel 6.6kW 24000rpm (no angular gear heads) Magasin Rapide12 - HSK 63 12-position automatic tool magazine 2 Becker 250m3 dry vane vacuum pumps Multiple chuck drilling head Movable control panel NUM1040PC control unit with Xilog Plus and Telesolve 3 safety mats Mesh protection perimeter Automatic slide lubrication Our in-stoc ...