127,271 used machines on RESALE, but how to find them? Machine Search
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t Optional: with Bollegraaf steel plate strip according to picture
Honda Emergency Power Generator 8 kVA - NEW with E-start, AVR ESC, 45 litre tank - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - - - - - Generator - Manufacturer: NSM, Italy - Power: 7.7 / 8 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - - - - - Start System - Electric starter via ignition lock - Start by cable pull also possible - - - - - Facilities - Large 45 liter tank - AVR regulator (for exact voltage compliance) - Electric start - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optionally orderable) - Wheelset + push rods - Service kit for initial maintenance - 2.5 mtr. Flexible exhaust hose - - - - - Other data: - Dimensions: 79 x 58 x 65 cm - Weight: 99 kg - Consumption: approx. 2.0 ltr. (50%) / 2.7 ltr. (75%) - - - - - Shipping: - Germany-wi ...
An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.
- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.
HONDA generator set 9 kVA - NEW Soundproofed - Stage V emission standard - - - - - Engine: - Honda - Model: GX390 - 1 cylinder - Gasoline - Air-cooled - Displacement: 389 cc - - - - - Generator: - Manufacturer: NSM (Italy) - 7.7 / 8.5 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hertz - AVR regulator - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - ATS interface, for easy plugging in of an ATS automatic start box - Hour meter - 1x 400V 16A socket - 2x 230V socket - - - - - Equipment: - AVR voltage regulator (so sensitive devices can also be operated) - Electric start - Oil pressure sensor - Overload protection - Automatic start interface (ATS connection) for easy plugging in / retrofitting of an automatic start box - Stage V emission standard: The device can therefore also be used for mobile application ...
Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!
Cooling cell with quail cooling motor Year of construction 2011 Coolant: R134a 2207 Height: 250cm Width: 90cm depth: 225cm
Honda Emergency Power Generator 7 / 8 kVA NEW with E-start and AVR controller - - - - - Engine - Honda GX390 - 1 cylinder - Air-cooled - 389 cc - - - - - Generator - Power: 7 / 7.7 kVA - Voltage: 230 / 400 volts - Frequency: 50 Hz. - AVR regulator - - - - - Start System - Electric start via ignition lock - Start by cable pull also possible - - - - - Facilities - Electric start - AVR regulator (for exact voltage compliance) - Sockets: 1x 230 V, 1x 400V 16A - - - - - Additional equipment (optional for an extra charge) - Wheel set + push bars: 120 € net - - - - - Other data: - Dimensions: 79 x 57 x 68 cm - Weight: 101 kg - Consumption: approx. 1.5 ltr. (50%) / 2.1 ltr. (75%) - - - - - Shipping: - Germany-wide transport including unloading is possible for an extra charge - To be able to quote an exact freight price, please sen ...
Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator
High-pressure pumps are used to clean plants and apparatus, allowing containers, filter cloths from filter presses and pipelines to be cleaned. Name: High Pressure Pump Used Manufacturer: Uraca Type: KD613 Year of construction: 1991 Material: Normal steel Drive motor: 54 kW Dimensions: L 1800 x W 1000 x H 750 mm Empty weight: approx. 2000 kg Speed: 468 rpm Flow rate: 270 liters / min. Condition: Used Tech. Documentation: Yes Price: On request
Deutz MWM Gas Power Generator Set 150 kVA - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - Used - The device comes from a waterworks and was installed there for emergency power protection / for occasional use - The engine was cooled via an external cooling circuit - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice with VAT will be generated - - - - - Other: - Sale of used machines in their current condition to tradespeople under exclusion of any warranty
Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA
Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp
max. wheel diameter: 0-200 mm max. module: 25 min. module: 0,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SDMO Power Generator 8 kVA + + With wheel set + + - - - - - Engine: - Suzuki - 1 cylinder - Air-cooled - - - - - Generator: - SDMO (France) - Power: 5.5 / 6 kVA - 230 volts - 50 Hertz - - - - - Condition and origin: - The generator set was used for rare private purposes and has only been running for a few hours - The engine starts and runs well - The generator generates 230 V and 50 Hz - A test run with load acceptance was done - - - - - Scope of delivery: - SDMO generator set 6 kVA - With wheelset - Incl. integrated tank - Exhaust / silencer - 2x 230V socket - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice is created - Margin taxation according to ...
MOSA generator set 15 kVA soundproofed - year 2014 - 500 hours - - - - - Engine: - Lombardini (Italian manufacturer of diesel industrial engines) - 2 cylinders - Diesel - Air-cooled - - - - - Generator: - Manufacturer: Sincro (Italy) - Power: 13.5 / 15 kVA - 230 / 400 volts - 50 Hertz - - - - - Control cabinet: - Ignition lock for starting - Generator monitoring: Volts, Hertz - Engine monitoring (engine temperature, fuel shortage, battery voltage, oil level) - Hour meter - 1x 400V 32A socket - 1x 400V 16A socket - 1x 230V CEE socket - 1x 230V Schuko socket - - - - - Condition and origin: - The generator set was only used for occasional purposes - It has only run for 500 hours of operation - A test run with load acceptance was done - The engine runs well and the generator generates 230 / 400 volts and 50 hertz - - - - - Scope of deliv ...
Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm
modernized machine with new LTG-StoreControl P control system Control expansion optionally possible Exterior Dimensions: Overall height 8,700 mm Overall width 3,500 mm Installation depth 1,580 mm 51 carriers with a payload of 350 kg each in clear usable dimensions: H = 255 mm W = 3,050 mm T = 520 mm Chain jump 305 mm 51 galvanized intermediate floors Total payload up to 19,000 kg Side table in 990 mm above OKFF with NiRo worktop, 315 mm deep Colour scheme grey Motor power drive 1 x 3.8 kW / 400 Volt subject to errors, technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in D, A and other neighboring countries
ROMACO KILIAN TABLET PRESS, MODEL S370 PRIME Medium-sized single-layer rotary tablet press. Modular and compact, for flexible tablet production. Made in Germany. Built in 2022. CHARACTERISTICS - Interchangeable die table - Tablet chute on one side - Simple and intuitive HMI control system - Connectable tablet control unit for automatic in-process control - Weight: 1.925 kg PRODUCTION - Output: 156,000 to 330,000 (depending on tablet size and pressing material) - Printing stations: 26 to 44 - Number of dies: 44; 40; 32; 26 - Tool type (EU and TSM): B; D - Die type: BBS; BB; B; D - Max. pre-compression force: 40 kN - Max. main compression force: 80; 100 kN - Max. tablet diameter: 11; 13; 16; 25 mm - Max. die fill: 16; 20 mm ENERGY CONSUMPTION - Drive power: 5.5 kW - Standard voltage, frequency: 400 V, 50/60 Hz - Compressed air: 6 bar
We offer an LTG-TowerMax L 67.9-245-3050-610-4360 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 4360 mm Overall width 3380 mm Overall depth 2312 mm Total machine payload up to 2 x 33,950 kg 29 carriers for up to 245 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 3050 mm T = 610 mm Usable height up to 50 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high; with automatic lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.75 kW / 400 Volt Door drive 0.25 k W Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring cou ...
Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood
We offer LTG-TowerMax L 20.0-250-1250-825-6900 storage systems modernized by us with a completely new StoreControl L control system. currently still 5 of 6 identical machines available Exterior Dimensions: Height 6900 mm Overall width 1580 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 50 to 750 mm Start of the operating opening in 860 mm above OKFF, then 1000 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installati ...
Type 012 F86 completely stainless steel 5.6 kW 30 L. funnels Capacity: 800 kg/h Dimensions (L x W x H) : ± 970 x 430 x 1,520 mm
+ + PRE-ORDER + + Due to the current high demand, this model is currently sold out. It is already reordered. The estimated production time is 8-12 weeks. You can pre-order the PTO generator of your choice from us. - - - - - PTO generator 80 kVA Year of construction 2021 - NEW Description: - PTO generator - 80 / 88kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 400 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt (125 A) Other equipment: - Residual current circuit breakers (from Schneider Electric, Germany) - Circuit breakers (from Schneider Electric, Germany) --> Other PTO generators with 18 kVA to 65 kVA are available. Price: - 5.750,- € + 19% VAT = 6.842,50 € Dispatch: - A Germany-wide transport includin ...
We offer LTG-TowerMax L 20.0-250-1250-825-5900 storage systems modernized by us with a completely new StoreControl L control system. currently 4 identical machines available Exterior Dimensions: Overall height 5900 mm Overall width 1580 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 68 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 50 to 750 mm Start of the operating opening in 860 mm above OKFF, then 1000 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation ...
Specifications: - BIA tested welding suction device - Articulated suction arm 3000 mm - Air volume flow approx. 1000 m³/h - static pressure 2700 pa - Filter area approx. m² - Filter control - Light for filter change - Separation efficiency 99.9 % - Compressed air connection 6 bar - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg
We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
+ + + PRE-ORDER + + + Due to the high demand, all PTO generators are currently sold out. All models are reordered and are in production. Unfortunately, an exact completion date is not yet known, as there are supply bottlenecks for important components that are required for production. Longer delivery times may be expected. A pre-order can be placed. - - - - - PTO Generator / PTO Generator --> This PTO unit is available in the power classes 18 - 65 kVA. List with prices can be found below in the text. Description: - PTO generator - 18 kVA / 22 kVA / 27 kVA / 38 kVA / 65 kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 428 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt Other equipment: - Residual current circuit breakers ( ...
We offer LTG-TowerMax L 20.0-250-1250-825-10.000 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Height 10,000 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 65 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, pictures of an identical machine ...
New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.
Multi-blade saw with feed belt, suitable for the very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Power of the main motor : 3 / 4 kW Diameter of the shaft: 30 mm Length of shaft: 400 mm Width of the feed belt: 400 mm Power of the feed motor: 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 300 mm KuSING has been manufacturing woodworking machines since 1991. Machine in stock.
We offer an LTG-TowerMax L 40.0-500-1300-863-6000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 6,000 mm Overall width 1630 mm Installation depth 2980 mm Total payload machine up to 2 x 10,000 kg 30 carriers for up to 500 kg payload each, in clear usable dimensions: W = 1300 mm T = 863 mm Usable height up to 50 to 750 mm Start of the operating opening in 870 mm above OKFF, then 845 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey//blue, carrier galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries
We offer an LTG-TowerMax L 67.3-210-3050-813-5450 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 4360 mm Overall width 3380 mm Overall depth 2312 mm Total machine payload up to 2 x 33,950 kg 29 carriers for up to 245 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 3050 mm T = 610 mm Usable height up to 50 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high; with automatic lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.75 kW / 400 Volt Door drive 0.25 k W Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring cou ...
Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.
Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg
Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake
Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg
We offer a paternoster LTG-TowerMax P 2.4-120-20-380-4780 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,780 mm Overall width 3,385 mm Overall depth 1,180 mm 20 carriers with a payload of 120 kg each in clear usable dimensions: H = 380 mm W = 2,950 mm T = 410 mm Chain jump 412 mm 20 galvanized intermediate floors for 55 kg payload each Total payload up to 2,380 kg Side table in 1000 mm above OKFF with wooden worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, supporting cases anthracite Motor power drive 1 x 1.8 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.
Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65
We offer a paternoster LTG-TowerMax P 4.0-165-25-380-5860 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 5,860 mm Overall width 2,940 mm Overall depth 1,180 mm 25 carriers with a payload of 165 kg each in clear usable dimensions: H = 380 mm W = 2,500 mm T = 410 mm Chain jump 412 mm Total payload up to 4,125 kg 1000 mm side table above OKFF with rubberized worktop, 300 mm deep, manually operated lifting door, Brown/n-grey colouring, grey straps Motor power drive 1 x 1.8 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg
We offer an LTG-TowerMax L 20.0-190-1850-825-9500 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Overall height 9,500 mm Overall width 2200 mm Installation depth 2700 mm Total payload machine up to 2 x 10,000 kg 58 carriers for up to 190 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1850 mm T = 825 mm Usable height up to 65 to 750 mm Start of the control opening in 870 mm above OKFF, then 800 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighbori ...
Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools
We offer an LTG-TowerMax L 20.0-210-1650-825-8700 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Overall height 8,700 mm Overall width 2000 mm Installation depth 2700 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 210 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1650 mm T = 825 mm Usable height up to 75 to 750 mm Start of the control opening in 870 mm above OKFF, then 800 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighbo ...
New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.
maximum number of results exceeded
please refine your search
