We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,256 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
pressure:015 t throat:200 mm stroke:4 - 70 mm no. of strokes:140 /min distance table/ram, max. stroke up, adjustment up:310 mm table surface area:430 x 395 mm hole in the table:165 x 160 mm table height over floor:560 - 735 mm table adjustable:175 mm ram surface:160 x 130 mm ram adjustment:80 mm power requirement:1,2 kW weight:0,9 t Dimensions (WxDxH):1,0 x 1,25 x 1,8 m clutch:Drehkeil overload protection in ram:mechanical
used
pressure:100 t throat:350 mm stroke:6 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:850 x 700 mm hole in the table:470 x 150 mm table height over floor:855 mm ram surface:450 x 300 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,0 t dimensions (WxDxH):1,5 x 2,3 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
used
pressure:040 t stroke:8 - 50 mm no. of strokes:50 - 300 /min distance between columns:600 mm distance table/ram, max. stroke up, adjustment up:285 mm table surface area:590 x 500 mm hole in the table:590 x 40 - 100 mm table height over floor:860 mm column travel -side:280 mm ram surface:590 x 380 mm ram adjustment:80 mm material width of feeder:150 mm power requirement:7,5 kW clutch:pneumatic ram adjustment:motoric pincer feed:mechanical
used
pressure:035 t throat:225 mm stroke:8 - 100 mm no. of strokes:110 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:580 x 460 mm hole in the table:250 x 150 mm table height over floor:700 mm table adjustable:230 mm ram surface:355 x 120 mm ram adjustment:70 mm power requirement:2,2 kW weight:1,5 t dimensions (WxDxH):1,0 x 1,5 x 2,05 m clutch:rolling key overload protection in ram:mechanical
used
pressure:080 t throat:360 mm stroke:8 - 112 mm no. of strokes:78 /min distance table/ram, max. stroke up, adjustment up:467 mm table surface area:900 x 650 mm hole in the table:250 mm table height over floor:800 mm passage to the back:330 mm ram surface:650 x 400 mm ram adjustment:80 mm power requirement:11,0 kW dimensions (WxDxH):1,2 x 2,2 x 2,9 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanisch
used
pressure:2000 t distance between columns:975 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:1000 mm table surface area:1015 x 1050 mm table height over floor:800 mm capacity of ejector in table:6,3 t ejector stroke in table:100 mm capacity of ejector in ram:65 t ejector stroke in ram:100 mm ram surface:975 x 1050 mm return capacity:150 t speed down:235 mm/s speed up:250 mm/s working speed:5 - 20 mm/s oil volume:4000 l height over floor:3,65 m height beneath floor:3,75 m power requirement:194,0 kW weight:105,0 t dimensions (WxDxH):5,0 x 6,5 x 7,4 m
used
pressure:063 t throat:450 mm stroke:8 - 100 mm no. of strokes:65 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:720 x 800 mm hole in the table:280/250 mm table height over floor:800 mm passage to the back:290 mm ram surface:450 x 280 mm ram adjustment:63 mm power requirement:7,5 kW weight:4,7 t dimensions (WxDxH):1,3 x 2,0 x 2,65 m clutch:pneumatisch overload protection in ram:mechanisch
used
pressure:050 t throat:250 mm stroke:8 - 120 mm no. of strokes:100 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:650 x 515 mm hole in the table:115 mm table height over floor:790 - 1020 mm table adjustable:230 mm ram surface:390 x 180 mm ram adjustment:70 mm power requirement:2,0 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,2 m overload protection in ram:mechanical
used
pressure:080 t throat:300 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:467 mm table surface area:710 x 560 mm hole in the table:240 x 115 mm table height over floor:800 mm ram surface:400 x 315 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,1 t dimensions (WxDxH):1,4 x 1,9 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical
used
pressure:100 t distance between columns:1180 mm stroke:1 - 120 mm no. of strokes:90 /min distance table/ram, stroke up:470 mm table surface area:1100 x 700 mm table height over floor:800 mm side window:400 mm ram surface:740 x 350 mm ram adjustment:100 mm power requirement:37,0 kW weight:11,0 t dimensions (WxDxH):2,3 x 2,0 x 3,5 m knuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich
used
pressure:063 t throat:280 mm stroke:8 - 100 mm no. of strokes:65 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:620 x 500 mm hole in the table:230 mm table height over floor:800 mm ram surface:310 x 255 mm ram adjustment:63 mm power requirement:5,5 kW weight:3,95 t dimensions (WxDxH):1,2 x 1,8 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical
used
pressure:125 t throat:340 mm stroke:20 - 160 mm no. of strokes:55 /min distance table/ram, max. stroke up, adjustment up:480 mm table surface area:1000 x 660 mm table height over floor:730 mm ram surface:600 x 300 mm ram adjustment:75 mm power requirement:8,5 kW weight:7,8 t dimensions (WxDxH):1,4 x 2,8 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
used
pressure:035 t throat:240 mm stroke:4 - 70 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:580 x 440 mm hole in the table:200 x 170 mm table height over floor:670 - 820 mm table adjustable:150 mm ram surface:300 x 175 mm ram adjustment:50 mm power requirement:3,0 kW weight:2,3 t dimensions (WxDxH):1,2 x 1,4 x 2,1 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
used
pressure:100 t throat:300 mm stroke:20 - 120 mm no. of strokes:55 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:800 x 560 mm hole in the table:310 x 180 mm table height over floor:745 mm ram surface:520 x 245 mm ram adjustment:75 mm power requirement:5,5 kW weight:5,5 t dimensions (WxDxH):1,1 x 2,4 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:mechanical
used
Pressure:080 t throat:280 mm stroke:20 - 120 mm no. of strokes:42 - 125 /min distance table/ram, max. stroke up, adjustment up:510 mm table surface area:700 x 560 mm hole in the table:280 mm table height over floor:800 mm passage to the back:320 mm ram surface:560 x 350 mm ram adjustment:72 mm Weight:5,2 t Dimensions (WxDxH):1,6 x 1,6 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
used
Pressure:080 t throat:300 mm stroke:8 - 140 mm no. of strokes:60 / 90 /min distance table/ram, max. stroke up, adjustment up:420 mm table surface area:800 x 600 mm hole in the table:330 x 230 mm table adjustable:230 mm table height over floor:750 - 980 mm ram surface:600 x 240 mm ram adjustment:100 mm power capacity:4,5 / 6,9 kW Weight:5,5 t Dimensions (WxDxH):1,4 x 2,5 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:hydraulic
used
pressure:320 t distance between columns:1530/1370 mm stroke:320 mm distance table/ram, stroke up:830 mm table surface area:1500 x 650 mm die cushion pressure in table:12,5 t table height over floor:1100 mm side window:570 mm ram surface:1240 x 650 mm capacity of ejector in table:12,5 t speed down:450 mm/s speed up:440 mm/s working speed:63,6 mm/s oil volume:2100 l power requirement:2 x 45,0 kW weight:27,0 t dimensions (WxDxH):4,0 x 2,3 x 4,9 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic drawing cushion in ram:hydraulic ram interlocking:hydraulic Option: NEW electrical controls:Siemens S7-1500 F
used
pressure:025 t throat:200 mm stroke:8 - 80 mm no. of strokes:60 - 180 /min distance table/ram, max. stroke up, adjustment up:330 mm table surface area:560 x 400 mm hole in the table:150 mm table height over floor:800 mm passage to the back:240 mm ram surface:355 x 220 mm ram adjustment:50 mm weight:3,0 t dimensions (WxDxH):1,0 x 1,4 x 2,2 m infinitely variable drive:Stöber overload protection in ram:mechanical NEW electrical controls:Pilz
used
pressure:100 t distance between columns:1250 mm stroke:1035 mm table surface area:890 x 1280 mm distance table/ram, max. stroke up, adjustment up:1035 mm table height over floor:630 mm ram surface:1000 x 1200 mm side window:700 mm max. tool weight:7 t max. capacity of swivelling ram plate:3,5 t oil volume:180 l power capacity:9,0 kW weight:11,0 t Dimensions (WxDxH):2,1 x 3,8 x 3,9 m ram interlocking:hydraulic
used
pressure:025 t throat:200 mm stroke:8 - 80 mm no. of strokes:180 /min distance table/ram, max. stroke up, adjustment up:330 mm table surface area:550 x 400 mm hole in the table:60 mm table height over floor:800 mm passage to the back:200 mm ram surface:355 x 220 mm ram adjustment:50 mm power requirement:2,7 kW weight:2,5 t dimensions (WxDxH):1,2 x 1,8 x 2,4 m overload protection in ram:mechanical
used
Pressure:035 t throat:225 mm stroke:8 - 100 mm no. of strokes:130 /min distance table/ram, max. stroke up, adjustment up:370 mm table surface area:580 x 450 mm hole in the table:210 x 170 mm table height over floor:700 mm ram surface:350 x 180 mm ram adjustment:70 mm power requirement:2,2 kW weight:2,2 t dimensions (WxDxH):1,0 x 1,8 x 2,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical
used
Pressure:250 t stroke:30 mm no. of strokes:60 - 500 /min Distance between columns:1500 mm distance table/ram, max. stroke up, adjustment up:390 mm table surface area:1580 x 1100 mm hole in the table:1270 x 300 mm table height over floor:1470 mm side window:600 mm ram surface:1500 x 900 mm ram adjustment:100 mm material width:500 mm material thickness:0,5 - 1,5 mm coil weight:6,5 t coil internal diameter:420 - 560 mm coil external diameter:1500 mm power capacity:45,0 kW Weight:44,0 t Dimensions (WxDxH):3,3 x 1,8 x 4,5 m clutch:pneumatisch ram adjustment:motorisch double decoiler:LH 2-1,5-500 straightening machine:R 500 roll feed:mechanisch; Schuler, WK 8-500
used
Pressure:1600 t distance between columns:4100 mm slide stroke:1450 mm Distance table/ram, stroke up:2750 mm distance table/blank holder, stroke up:2200 Table surface area:4000 x 2200 mm ram pressure:1000 t Pressure of blank holder:600 t stroke of blankholder:1000 mm blank holder surface:4050 x 2200 mm Ram surface:3200 x 1650 mm pressure of drawing cushion in table:360 t Die cushion stroke in table:300 mm die cushion area:3500 x 1600 mm Side window:1100 mm Oil volume:9000 l Power capacity:390,0 kW Weight:250,0 t Dimensions (WxDxH):5,95 x 4,3 x 10,5 m Height above floor:8,6 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable
used
pressure:063 t throat:250 mm stroke:8 - 100 mm Stroke rate:60 - 160 / min Distance table/ram, max. stroke up, adjustment up:415 mm Table surface area:710 x 500 mm Hole in the table:250 / 280 mm Table height above floor:800 mm Passage to the back:290 mm Ram surface:450 x 280 mm Ram adjustment:63 mm Weight:4,3 t Dimensions (WxDxH):1,5 x 1,7 x 2,7 m infinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical
used
pressure:063 t throat:250 mm stroke:8 - 100 mm Stroke rate:47 - 140 / min Distance table/ram, max. stroke up, adjustment up:415 mm Table surface area:710 x 480 mm Hole in the table:280 / 250 mm Table height above floor:800 mm Passage to the back:290 mm Ram surface:450 x 280 mm Ram adjustment:63 mm Weight:4,0 t Dimensions (WxDxH):1,5 x 1,6 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 infinitely variable drive:PIV clutch:pneumatic overload protection in ram:mechanical
used
pressure:400 t distance between columns:1060 mm stroke:450 mm no. of strokes:15 - 30 /min distance table/ram, max. stroke up, adjustment up:1160 mm table surface area:1000 x 700 mm capacity of ejector in table:2 x 16 t ejector stroke of ejector in table:125 mm Die cushion pressure in table:120 t Die cushion stroke in table:2 mm capacity of ejector in ram:2 x 4 t stroke of ejector in ram:100 mm ram surface:1000 x 700 mm column travel -side:630 mm power capacity:55,0 kW weight:50,0 t die cushion in table:2. station
used
CONTROLS PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN drive system: servomechanic feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 70 mm stroke rate (max.): 140 /min COUNTER RAM nominal force: 625 to stroke: 25 mm V-RING nominal force: 1250 to stroke: 25 mm TOOL DIMENSIONS lower table (left-right): 600 mm lower table (front-back): 600 mm upper table (left-right): 600 mm upper table (front-back): 600 mm shut height max.: 380 mm ram adjustment: 125 mm STRIP-FEEDER sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step min.: 0.1 mm feeding step max.: 300 mm sheet length min: 2500 mm CR ...
used
Manufacturer: SEDIN - Russia Model: 1525 Condition: no electrics , mechanics complete, we can offer machine as it is or after general overhaul - new mechanics, new electrics or new CNC on request Localisation: our workshop, Rudniki - Poland Technical details Turning diameter : 1 600 mm Faceplate diameter: 1 400 mm Max workpiece height : 1 000 mm Max table loading : 5 000 kg Max horizontal ram travel : 630 mm Max horizontal carriage travel : 975 mm Max vertical ram travel : 700 mm Max vertical carriage travel : 1 000 mm No of feed carriages : 16 Carriages feed range : 0,07 - 12,5 mm/rev Distance between table and ram 0-1 225 mm Main motor power : 30 kW Speeds range : 4-200 rpm Dimensions : 3 190 x 3 360 x 4 100 mm Machine weight : 18 000 kg
used
800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request
used
Capacity, ton 630 Ram stroke, mm 300 Ram adjustment, mm 220 Number of strokes per minute 15 Table dimensions, mm 1100 x 1500 Slider dimensions, mm 1000 x 1250 Distance between table and slider in its lower and upper adjustment position, mm 650 Ram ejector stroke, mm 100 Capacity of hydro cushion, ton 55 Stroke of hydro cushion, mm 150 Main motor power, kW 55 Press weight, kg 63000
used
Capacity: 1 t Table length: 00 mm Table width: 0 mm Stroke: 0 mm CNC Model: 0 Motorised ram 80 mm Optional shrink & strech tools Foot switch to control ram Left & Right Number of strokes: 400Min. Maximum sheet thickness:2,5 mm Horizontal troath: 340mm Vertical troath: 245mm Max. thickness Stainles:1,5 mm Max. thickness Aluminium:2,5 mm Motorised ram adjustment:30 Power: 1,6 kW Length: 1.210 mm Width: 660 mm Height: 1.665 mm Weight: 370 kg
used
moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000
used
Table diameter: 3100 mm Turning diameter: 3200 mm Turning height: 2000 mm Motor power: 0 HP/kW Positions ATC: 00 Positions APC: 0 MACH-id 5352 MAKE BOST SA SPAIN TYPE HYPRO 10 YOP 2000 SPECIFICATIONS Max. turning diameter Ø 3200 mm Table Ø 3100 mm Control Conventionel Horizontal movement support 2000 mm Stroke ram left 1250 mm Stroke ram right 1250 mm Angle adjustment / ram swivable 30 ° Single column or double column Double column Maximum turning height & ...
used
Table diameter: 1400 mm Turning diameter: 1600 mm Turning height: 1000 mm Motor power: 25 HP/kW Positions ATC: 0 Positions APC: 0 SPECIFICATIONS Max. turning diamter Ø 1600 mm Table / chuck size Ø 1400 mm Workpiece height 1000 mm Work piece weight 8000 Kg Horizontal movement support / ram 700 mm Stroke support left ram 850 mm Angle adjustment / ram swivable 35 Gr Singel column or double column Single column Spindle speeds / ranges 5 - 200 Rpm Power 25 Kw DIMENSIONS Length 3500 mm Width 4200 mm Height 4750 mm
used
Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading ...
used
Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 100 ton Passage between uprights: 530 mm Max ram adjustment: 200 mm Distance between table -- ram: 250 mm Table area: 502 x 502 mm Ram area: 530 x 500 mm Length: 1600 mm Depth: 1200 mm Height: 2300 mm Weight: 2 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse
used
pressure: 65 t throat: 370 mm stroke: 29-151 mm no. of strokes: 50 Hub/min ram - range of adjustment: 80 mm table surface area: 1300x700 mm ram surface: 1000x600 mm hole in the table: ¦ 110 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1700x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimensions: -front to back: 1950 mm; -left to right: 1920 mm Mechanical upper ejector: -max stroke: 100 mm; -number of positions: 1 -steps of stroke adjustment: 25-30-75 mm -force: 30 ton Pneumatic lower ejector: -max stroke: 300 mm -stepless stroke adjustment: 15-300 mm -number of positions: 3; -force: 65 ton Side windows dimensions: -width: 1100 mm; -height: 1280 mm Main motor: 400/590 kW/rpm Press layout dimensions: 6300x8965 mm Total height: 11125 mm Height above floor level: 9150 mm Total weight: 626100 kg
used
pressure: 100 t no. of strokes: 30-70 Hub/min Max ram stroke: 130 mm ram adjustment: 100 mm table surface area: 950x630 mm ram surface: 630x600 mm throat: 340 mm dayligth: 480 mm coil: GSW total power requirement: kW weight of the machine ca.: 8,9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster ...
used
faceplate diameter:3500 mm swing diameter:3800 mm turning height:2300 mm max. turning diameter:3800 mm table load:40 t table speeds:10 - 38 1/min transmission ratio:2 Stufen cross travel of ram-slide:rechts: 2500 mm cross travel of ram-slide:links: 2200 mm Travel of Ram (vertical):1500 mm total power requirement:70 kW Rams:2 Stück
used
pressure: 100 t distance between columns: 1000 mm stroke: 150 mm distance table/ram: 500 mm table surface area: 1000 x 700 mm die cushion stroke: 180 mm ram surface: 1000 x 700 mm ram drills x depth: 50 mm no. of strokes: 85 Hub/min tool shank hole (depth x diameter): 85 x 50 mm clamping slots: 22 DIN 650 form: diagonal number of clamping slots: 2 sheet width: 400 mm plate length: 1000 mm dimensions of the machine ca.: 3,0 x 3,0 x 3,0 m weight of the machine ca.: 8 t total power requirement: 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t stroke: 650 mm throat: 380 mm table surface area: 650 x 1000 mm ram surface: 650 x 1000 mm dayligth: 850 mm die cushion stroke: 220 mm die cushion area: 500 x 520 mm die cushion capacity: 25 t ram stroke speed - under load: Vorlauf 400 mm/sec ram stroke speed: Rücklauf 330 mm/sec drawing speed: Auf 220 mm/sec drawing speed: Ab 300 mm/sec working height (floor - top of table): 1050 mm total power requirement: 18,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,2 x 2,2 x 3,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 45 t throat: 230 mm stroke: 4 - 80 mm strokes per minute: 120 table surface area: 690 x 460 mm ram surface: 360 x 185 mm ram adjustment: 55 mm daylight, max. stroke above - ram adjustment above: 340 mm total power requirement: 3 kW weight of the machine ca.: 2,95 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min ram surface: 160 x 160 mm ram adjustment: 40 mm ram hole: 32 H7 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm total power requirement: 2,7 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,3 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.