radial used for sale

Thermalcycler PTC-200 DNA Engine block 96 well Pcr BIO-RAD Temperature range: approx. -5°C to 105°C Heating/cooling speed: up to 3 °C/s Temperature accuracy: 0.3°C to 90°C Capacity: 96 wells (double block) Dimensions (W x D x H): approx. 30 x 35 x 30 cm Weight: approx. 12 kg Power supply: 100-240 V, 50/60 Hz With Alpha BioRad PTC DNA Engine Systems Thermal Cycler PCR Lab Unit Block (Serial No.: AL057123)

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, radio remote control, radio remote control, crane radio system -Manufacturer: HBC radiomatic, crane radio transmitter receiver -Type: FSE 716 Radio remote control micron 5 -Scope of delivery: as shown in the pictures -Price/Fee: complete -Transport dimensions: 340/270/H130 mm -Weight: 4.5 kg

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, radio remote control, radio remote control, crane radio system -Manufacturer: HBC radiomatic, crane radio transmitter receiver -Type: FSE 514 -Scope of delivery: as shown in the pictures -Price/Fee: complete -Transport dimensions: 400/300/H60 mm -Weight: 2.7 kg

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: HBC radiomatic, radio control system for crane remote control -Type: FuSt 671 -Scope of delivery: as per pictures, plug/connection cable (without remote control). -Total dimensions: 320/210/H130 mm -Weight: 3.7 kg

13900 kg net weight List available on request

Complete industrial Rademaker dough processing / sheeting line / rollout line with universal line, designed for the continuous production of flat dough sheets, followed by cutting into uniform square portions. Products like Puffy Pastry dough, croissant dough and Dansih patry dough sheets can be produced on this line. Line availabe for sale because of change of production., Working principle:, Feeding of thick laminated dough slabs, gradual reduction via multiple gauging / pressing stages. Formation of a continuous dough sheet, cutting (slitting) longitudinal dough strips then cutting them, with a cross cutter, into its final shape. To prevent the dough sticking to the conveyor belt a continuous flow of flour is added in different stations. The line has an automatic removal and collection of excess dough for reuse. The last part of the line is a 4 meter processing zone which can be used  ...

Rademaker / Rondo ‘salmon en croute’ line Rademaker block processor with Rondo make up line. Has been producing ‘Salmon en croute’ for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Mainly used seasonally so only 11,800 running hours.

Used pastry line RONDO / RADEMAKER Consisting of: - RADEMAKER Block Processor for the gentle rolling out of dough blocks Year of manufacture: 2006 - RONDO preparation line for pastries of all kinds, such as waxed, filled products, 2 layers of dough, croissants, etc. - Guillotine, punching and cutting station ZGEM700W. A, year of construction 2009 - Calibration unit ZKWA605A. A, year of manufacture 2011 Very good condition, ready for immediate use. Visits and test runs are possible by arrangement.

Rademaker SprayIng Machine Type: Pump System Year of construction 2012 4 rows Injectors System with compressed air with large funnel Stainless steel cladding 400V 50Hz on rolls Height: 193cm Width: 160cm Depth: 140cm

Rademaker Bestreungslinie Stainless steel cladding Stainless steel band analog control can be controlled together or individually 269 operating hours Dimensions individually: 1st table: 92x110x120cm W/D/H 2nd table: 92x107x110cm W/D/H

Different kind of sheeted and rolled breads. Niittypitko 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku, 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system Product specification: Manufacturer: Rademaker Holland Type: Crusto bread line Year: 2008 Voltage: 3 x 400 v + N + Pe, 50 Hz Control voltage: 24 Vdc Power consumption: 21, 9 kW Inom: 41 A, max fuse 50 A Avarage air consumption: 196 nl / min Max air consumption: 548 nl / min Dimension: L 21 000 mm, W 3000 mm, H 6000 mm

The Radenska & Steinle (RS) ERO-3T is an industrial bottle packer (packer / unpacker) for the beverage industry. The machine is typically used in automated filling lines for returnable glass bottles (e.g. for beer, mineral water or soft drinks). Technical Specifications & Details Machine Type: Bottle Packer (Gripper Head Packer) Packing heads: 3 heads (hence the designation "3T"), designed for parallel gripping and moving of bottle segments (e.g. packing grids for standard crate dimensions such as 6x4 or 5x4 bottles). Operating pressure: 6 bar air pressure (pneumatic control of the gripper heads). Item Condition: In Operation Availability: from 13.01.2027 Dismantling: by buyer Viewing: by arrangement Location: Bavaria, Germany Connection: 380 V / 50 Hz

Depositor Make: Rademaker Model: Spot Depositor Built 2003 4 heads Ex pie production, at 170 pies min Siemens touch screen control

Manufacturer: Radenska-Steinle / Germany Type: RP 20/125 Spray heads: 20 Bottles 0.50 + 1.00 L + 1.5 liters Complete V2A Running Direction: Left to Right Year of Make: 1996 With control cabinet Film available - Please request

RAMATIK - Automatic machine for the production of concrete products on a concrete surface (track). Manufacturer - JOSEF RADINGER – Klagenfurt - Austria Year 2007 The machine is of Austrian origin. Massive construction and very flexible. The wheelbase is 120 cm. It operates on 380 V. The minimum fuse rating is 35 A. The weight of the machine without the model is approximately 5 tons. The machine operates via Hawe hydraulics and electromagnetic valves. The machine was last generally renovated in 2021 It is set via a touch monitor. touch. The program on the screen can be programmed in any language. The machine can be converted into a stable machine because it has an internal table with high-frequency vibrators. The machine includes two sets of vibrators and up to 10 metal molds (models) for concrete blocks, concrete corner blocks and external chimney blocks. The machine ...

Description Item #8967 - BREAD PRODUCTION LINE Manufactured by RADEMAKER working width of 600mms Type Crusto Bake Line Was doing the following types of products : Niittypitko 2000 pcs / h, 2 rows, dough thickness 3-4 mm Coffee bread Kranssi 2000 pcs / h, 2 rows, dough thickness 3-4 mm Muhku, 10 000 pcs / h, 8 rows, dough thickness 6-8 mm Ciabatta, 7200 pcs / h, 6 rows Folded bread, 4800 pcs / h, 4 rows, dough thickness 5 mm Capacity based on 20 strokes per minute for the retracting belt, in combination with the product discharge conveyor system. Voltage: 3 x 400 v + N + Pe, 50 Hz Control voltage: 24 Vdc Power consumption: 21, 9 kW Inom: 41 A, max fuse 50 A Avarage air consumption: 196 nl / min Max air consumption: 548 nl / min Dimension: L 21 000 mm, W 3000 mm, H 6000 mm. Line includes : Infeed transport conveyor, working width 600 mm, lenght 2900 mm. Flour duster, working width 600 mm,  ...

Numbering machine, Herzig Radus, Model B, Year 1977, Max sheet size 250 x 350 mm, Speed of substrates up to 4.000 cycli per hour, Speed of numbering up to 15.000 cycli per hour, Nr. of heads 2 numbering heads, Feeder manual, by hand, Delivery a table or jogger is suggested, condition : partly refurbished, still needs some work, Max sheetsize: 250 x 350mm, Speed of substrates: up to 4.000 cycli per hour, Speed of numbering: up to 15.000 cycli per hour, Nr. of heads: 2 numbering heads, Feeder: manual, by hand, Delivery: a table or jogger is suggested

The Radenska & Steinle (RS) SPN-2S is a professional crate washer that is primarily used in the beverage industry for cleaning returnable bottle crates. Item Condition: In Operation Availability: from 13.01.2027 Dismantling: by buyer Viewing. by arrangement Connection: 380 V, 50 Hz Power: 8 kW Location: Bavaria, Germany

The Radenska & Steinle (RS) ARO-P3 Unpacker is an industrial beverage machine typically used in bottling lines to unpack bottles from crates or crates Item Condition: In Operation Availability: from 13.01.2027 Dismantling: by buyer Viewing: by arrangement Location: Bavaria, Germany Power: 3 kW Connection: 380 V, 50 Hz Air pressure: 6 bar

Engine in exchange Yanmar Type=3TNE88-ENKR from Kramer wheel loader with warranty immediately available from stock. all prices plus vat. info@miw-zeven.de

4 head ( 50 mm)

Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30

2 x 0.6V per revolution per min. I max. 2 x 0.09A V max. 10000 revolutions per min.

Line for laminating and cutting dough

Three-phase motor, electric motor -Voltage: 220 V -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 7500 rpm -Shaft: Ø 35 mm -Dimensions: 370/192/H295 mm -Weight: 24 kg

line for croisants

Recording width 80 cm, recording width 26 cm, bolt 9 cm, height 190 cm, depth 215 cm

PostProcess Technologies RADOR – Automatisierte Oberflächenveredelung für additive Fertigung Die PostProcess RADOR aus 2022 ist eine industrielle Nachbearbeitungsmaschine zur automatisierten Oberflächenbehandlung von 3D-gedruckten Bauteilen. Das System ermöglicht reproduzierbare Glättungs- und Entgratungsprozesse ohne manuelle Eingriffe. Technologie und Funktion Die Maschine arbeitet mit der patentierten Suspended Rotational Force (SRF)-Technologie: Bauteile werden in einem geschlossenen System rotierend mit Schleifmedien in Flüssigkeit bearbeitet. Der Prozess ist SPS-gesteuert und gewährleistet gleichmäßige Ergebnisse bei hoher Wiederholgenauigkeit. Kompatibilität Geeignet für Bauteile aus FDM, SLA, SLS, MJF, PolyJet sowie metallbasierten additiven Verfahren. Die RADOR verarbeitet sowohl Kunststoff- als auch Metallteile. Ausstattung Geschlossenes System mit integriertem Fl ...

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

TECHNICAL DATA: Saw stroke: 550 mm Saw blade: max. Ø 300 mm Tilt of the saw blade: 0° - 90° Installed power: 2.5 hp

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control, radio remote control, radio transmitter -Manufacturer: Ikusi, radio remote control receiver for crane remote control -Type:TM70/1.13 -Scope of delivery: Radio remote control receivers as shown in the pictures (without remote control) Dimensions: 320/290/H110 mm -Weight: 2.9 kg

Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: ebm, radial fan extraction fan -Type: unfortunately without type designation -Voltage: 220V -Speed: 1080 rpm -Inlet: Ø 190 mm -Air duct connection: 285 x 145 mm -Number: 2x blowers available -Price per piece -Dimensions: 360/320/H375mm -Weight: 12 kg/piece

OMGA professional radial saw, model RADIAL 900/5, for wood cutting work in the workshop. Features: Brand: OMGA; Model: RADIAL 900/5; year: 2012; Serial Number: 7380; engine power: 3.68 kW; Power supply: 400 V / 50 Hz; Blade diameter: max. 400mm; Min. blade diameter indicated: 390 mm; Bore: 30mm; CE marking. Machine equipped with a large work table and an adjustable radial sawing unit. According to the saleswoman, the machine was working when it was last used, but has not been used for a long time. Machine sold in its current condition. Auction-ID: A3-46110-41163

Rapid radial / Rapid radial / Snel radial DANUBE DR 13

For sale is a radiator module from JCB with intercooler and engine radiator from 2021, the radiator is unused. Condition: as good as new (only test run in the factory) JCB Part Number: 320/04847 Total Part Number: MN422200-03300B Case Part Number: MN122110-6013 Water Chiller Part Number: MN422135-0410 Intercooler Part Number: MN127100-4310 F4KAKT1845 Intercooler also fits John Deere and Yanmar We have other parts from JCB and Mitsubishi available If you have any further questions, please do not hesitate to contact us!

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47 kW -Fan diameter: 570 mm -Protection class: IP 44 -Number: 5x radial fans available -Price: per piece -Weight: 16.5 kg

High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction, radial duct fan -Manufacturer: Maico, radial tube fan type ERR 12/1 -Voltage: 220V -Power: 62 W -Protection class: Iso-Kl.B G 42 -Connection input: Ø 120 mm -Connection output: Ø 125 mm -Fan wheel: Ø 330 x 170 mm -Dimensions: 420/270/H250mm -Weight: 3.5 kg/piece

Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction, extraction blower -Manufacturer: Dietz, radial fan, radial ventilator, exhaust fan -Type: DG 71 b 1286 -Volume output: 13 m³/min -Motor: Dietz 0.48 kW -Speed: 2340 rpm -Protection class: IP 44 -Inlet connection: Ø 120 mm -Outlet connection: Ø 95 mm -Fan wheel: Ø 320 x 45 mm -Number: 3x extraction fans available -Price: per piece -Dimensions: 430/410/H295 mm -Weight: 16.8 kg/pc.

FORADIA GK 50/1500 – Radial Drilling Machine Manufacturer: FORADIA Model: GK 50/1500 Machine Type: Radial Drilling Machine Country of Manufacture: Spain Condition: Used Year of Manufacture: Not specified Technical Specifications | Specification | Details | Maximum Drilling Capacity | 50 mm | | Radial Arm Length | 1,500 mm | | Column Diameter | 350 mm | | Maximum Spindle-to-Base Distance | 1,300 mm | | Spindle Taper | Morse Taper MT4 | | Spindle Motor Power | Approx. 2.6 kW (3.5 HP) | | Number of Spindle Speeds | 12 | | Spindle Speed Range | 35 – 1,460 rpm | | Number of Automatic Feeds | 6 | | Feed Range | 0.05 – 0.35 mm/rev | | Base Dimensions | 1,685 × 820 mm | | Approximate Machine Weight | 3,000 kg Auction-ID: A1-51153-46

FORADIA GK 50/1500 – Radial Drilling Machine Manufacturer: FORADIA Model: GK 50/1500 Machine Type: Radial Drilling Machine Country of Manufacture: Spain Condition: Used Year of Manufacture: Not specified Technical Specifications | Specification | Details | Maximum Drilling Capacity | 50 mm | | Radial Arm Length | 1,500 mm | | Column Diameter | 350 mm | | Maximum Spindle-to-Base Distance | 1,300 mm | | Spindle Taper | Morse Taper MT4 | | Spindle Motor Power | Approx. 2.6 kW (3.5 HP) | | Number of Spindle Speeds | 12 | | Spindle Speed Range | 35 – 1,460 rpm | | Number of Automatic Feeds | 6 | | Feed Range | 0.05 – 0.35 mm/rev | | Base Dimensions | 1,685 × 820 mm | | Approximate Machine Weight | 3,000 kg Auction-ID: A1-51509-46

Radiator, Radiator, Heat Exchanger PAGUS 830 x 145 x 840 mm mains dimension: 820 x 755 Connection thread: 1 1/2 inch New ! Dimensions: 830 x 145 x 1020 mm

Double Hydraulic Pump with Radiator REXROTH 1PF2G240/004RR20MR 3630430 00 1PF2V5-10/ 25RE01MC 70A1 ( 1PF2V5-10/25RE01MC70A1 ) 352 256/2 Radiator 011456 used, tested ! Dimensions: 550 x 400 x 650 mm

Radiator with blower, cooling fan, oil cooler EBM W2E 250 AB05 01 ( W2E250AB0501 ) radiator : 250 x 240 x 80 mm fan: Ø 250 mm 0,0,0,000 mm /br /br /0,0 135 KW 2500 rpm 220 V Dimensions: 500 x 360 x 200 mm

Radiators, heat exchangers, oil coolers MANNESMANN DEMAG 571 372 connections: Ø 60 mm flanges: Ø 165 mm, 100 x 100 mm radiator net: 380 x 110 x 410 mm radiator made of aluminium ! used, tested ! Dimensions: 610 x 215 x 500 mm

Radiators, heat exchangers, oil coolers MANNESMANN DEMAG 571 371 connections: Ø 24 / 40 mm radiator net: 740 x 110 x 600 mm radiator made of aluminium ! used, tested ! Dimensions: 910 x 210 x 600 mm

Offered is a radial drilling machine. Equipped with a height-adjustable radial arm, horizontally movable drill head, clamping table with T-slots and base plate with clamping slots. Inspection possible by arrangement.

4 x Ceramic jacketed radiant tubes 514736 4 x Ceramic Jacketed Radiant Tubes 514736 L= 1520 mm OD= 128 mm More items - new and used - can be found in our shop! International shipping costs on request!