We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,233 used machines on RESALE, but how to find them? Machine Search
used
Plug is missing
used
used
used
Air pressure max: 7 bar, length of inlet conveyor approx. 880cm, length of discharge conveyor approx. 300cm, equipped with automatic supply, Elumatic type SAP 142 / E550 positioning control, inlet protection. Please note! Machine is working but has occasional start-up problems. Please note! The buyer is responsible for the dismantling and loading, after dismantling the threaded rods must be ground down and any electrics must be insulated. Pick up 01-05-2024 from 09.00-15.00 hrs, start dismantling 09.00 hrs.
used
used
Equipped with 2x pneumatic locking clamp
used
used
used
used
Equipped with 32A 400v 5-pin plug;
used
Arm length: 2200 mm Drilling capacity steel: Ø 50 mm Spindle Mounting: MK5 Spindle speeds: 30 - 2200 rpm. Spindle -> slab: 1620 mm (max) Clamping sleeve LxWxH: 480 x 820 x 550 mm Surface floor slab: 1700 x 800 mm Motor power: 6 kW Country of origin: Italy Machine LxWxH: 2760 x 1000 x 2960 mm Machine Weight: 6000 kg
used
Equipped with: metabo ksu 251 chassis.
used
used
left-hand equipped with manually adjustable two-piece stop, maximum range 4200 to 6200 mm; equipped with pneumatic / manual material clamp; coolant liquid pump; mitre adjustable; saw blade diameter 315 mm; capacity solid square 50 mm; capacity solid round 55 mm; capacity square 100 mm; capacity around 110 mm;
used
Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm
used
Clamping block included. Arm-length: 1600mm
used
Buyer is responsible for the disassembly
used
The lot is located on the 1st floor, accessible by stairs. There is no elevator. A forklift truck is available on site.
used
bore capacity in steel (diameter): 50,0 mm arm length: 350 - 1.590 mm workpiece height max.: 645 - 1.240 mm turning speeds: 25 - 2000 U/min spindle taper MT: 5 MK base plate: 980 x 1.600 mm threading: 42 M quill stroke: 320 mm total power requirement: 4,0 kW weight of the machine ca.: 3.500 kg. range L-W-H: 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED mach ...
used
used
used
used
Equipped with laser and DeWalt chassis
used
used
: gebraucht : 2017 : 3900 : China : 8490 € : 6800 € : 1 : 32 mm : MK 4 : 300 - 1.000 mm : 32 - 2.500 (16) U/min : 1760 mm : 800 mm : 2080 mm : 1600 kg : 530 - 1.000 mm : 2.2 kW : 240 mm : 250 mm : 0,75 kW : 0,10 - 1,25 (8) mm/U box table 600 x 455 x 455 mm coolant equipment machine lamp mechanical clamping for height adjustment and spindle stock electr. clamping for arm rotation machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
used
Equipped with Milwaukee aluminum saw blade; on and including wooden workbench; Size total approximately 120x70x120cm.
used
used
used
Shaft hole: 30mm. Without drain conveyor and table
used
Rotational speed: 133-700/min, drilling diameter: 1-50mm.
used
Connected load: 40W.
used
Max. drilling capacity: 32mm, weight: 1.4t.
used
Rotational speed: 70-580/min, connected load: 5kW, weight: 3t.
used
Max. rotational speed: 1000/min, without documentation, machine is fully functional.
used
drilling diameter in mild steel 32 mm diameter during thread cutting 20 mm Projection 1,000 mm Power requirement 3.5 kW Machine weight approx. 1.7 t Accessories: Cube table
used
Brand SASS Italy Model TRM 2200 Capacity 100 mm Spindle taper MT 6 Drilling depth 500 mm Spindle speed 18-1600 O-min. Horizontal movement 1845 mm Distance table spindle 2230 mm Colum diameter 550 mm T-slot base plate size 22 mm Floor dimensions 3500 x 1250 mm Power 11 Kw Weight 9000 Kg Dimensions L x W x H 3500 x1250 x 3700mm Extra Block table angle adjustable 760 x 1000 x 600 mm Blok table 1000 x 1000 x 600 mm
used
Connected load: 5kW, weight: 3t.
used
Connected load: 5kW, weight: 4.3t.
used
Rotational speed: 63-1600/min.
used
Rotational speed: 45-1750/min, connected load: 8.36kW.
used
Rotational speed: 37-1900/min, an inspection is possible.
used
Connected load: 5kW, weight: 3t.
used
Stroke: 780mm, rotational speed: 30-1700/min.
used
max. drilling capacity: steel: 75mm, cast iron: 90mm, spindle speed: 19-1900rpm, vertical arm movement: 950mm, horizontal arm movement: 2000mm, max. spindle movement on the arm: 380mm. Dimensions X/Y/Z: 3220mm x 1130mm x 3400mm, weight: approx. 7000kg.
used
Volume flow: 27,000m³/h, pressure increase: 3800pa, fan belt length: 3550mm, motor power: 55kW, available after June 2023.
used
well-preserved machine with wind device
used
Projection: 1200 mm Drilling capacity steel: Ø 30 mm Casting drilling capacity: Ø 40 mm Spindle Mount: MK4 Spindle speeds: 1350 rpm. Clamping sleeve LxWxH: 460 x 550 x 500 mm Surface flat floor plate: 1100 x 500 mm Country of origin: Italy Machine LxWxH: 1750 x 640 x 2100 mm Machine weight: 1500 kg
used
: gebraucht : 2021 : 3965 : prompt, Zwischenverkauf v : Taiwan : 15600 € : 1 : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 0,75 kW : 635 x 520 x 415 mm : 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution ...