radial used for sale

Drilling capacity (steel): 50mm, spindle speed: 1700rpm, reach: 45mm-1500mm, workpiece height range: 470mm-1500mm, sleeve stroke: 680mm, quill stroke: 350mm, spindle taper: MK5, max. tool weight: approx. 30kg. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm, weight: approx. 4000kg. An on-site inspection is possible.

arm length: 1600 mm taper MK: 5 : Würfel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. drilling diameter ... 63mm Spindle holder ... Morse code 6. Machine weight ... 7100kg Max. vertical arm adjustment ... 950mm Spindle speed ... 11-2000 rpm Main engine power ... 5.5kW Total power requirement ... 8.5kVA The machine is in good condition, possible to test under power.

Key data: 100 mm, 3000 mm

Radial drilling machine CSEPEL RFH-100 / 3000 – technically flawless Description: For sale is a used radial drilling machine / column drilling machine / column drilling machine from the manufacturer CSEPEL, type RFH-100 / 3000. The machine is technically flawless and ready for use in the workshop or production. It is ideal for drilling work on medium to large workpieces. Technical data: Manufacturer: CSEPEL Type: RFH-100 / 3000 Drilling capacity: 100 mm Projection: approx. 3,000 mm Speed range: 18 – 1,800 rpm Spindle holder: MK6 Spindle stroke: approx. 400 mm Feed rate: 0.0375 – 2.0 mm/rev Connected load: 15 kW / 380 V Dimensions (L × W × H): approx. 4,400 × 1,600 × 4,200 mm Condition: technically perfect Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.

bore capacity in steel (diameter): 40 mm arm length: 1600 mm bore capacity in cast iron: 60 mm spindle diameter: 85 mm quill stroke: mm tool taper: MK 5 speeds: 24 - 1050 U/min feeds: 0,06 - 1,0 mm/U column diameter: 345 mm vertical adjustment of the arm: 900 mm thread cutting attachment: ja Boring motor: 5,5 kw total power requirement: 7,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,5 x 1,0 x 2,99 m Radial drilling machine - Mounting cube 750 x 500 x 500 mm - Digital display for boom travel - Coolant system - Good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drilling machine, drilling machine, boom drilling machine, universal drilling machine, milling machine -Projection: 645 mm -Taper mount: MK3 -Speeds: 95 - 1050 rpm -Columns: Ø 190 mm -Spindle stroke: 195 mm -automatic feed: 0.05/0.10/0.20 mm/rev -Clamping table: 735 x 520 mm -Dimensions: 1350/705/H2170 mm -Weight: 1100 kg

Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

A bench drilling and tapping machine Ixion including automatic rapid traverse is available. Drilling capacity steel/cast iron: 15mm/14mm, tapping capacity: M3-M10, spindle mount: MK2, quill stroke: 90mm, reach: 215mm, column diameter: 75mm, speed: 1600rpm, table dimensions X/Y: approx. 220mm/285mm, weight: approx. 100kg. An on-site inspection is possible.

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47 kW -Fan diameter: 570 mm -Protection class: IP 44 -Number: 5x radial fans available -Price: per piece -Weight: 16.5 kg

High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Drilling capacity steel/cast iron: 50mm/60mm, spindle axis-column distance min./max.: 350mm/1600mm, spindle end-working surface distance: 350mm-1250mm, horizontal traverse: 1250mm, column arm vertical travel: 580mm, column diameter: 350mm, arm swivel: 360°, speed: 2000rpm, spindle travel: 315mm, torque: 392Nm, feed force: 15.6kN, machine dimensions X/Y/Z: approx. 2500mm/1250mm/3250mm, weight: approx. 3500kg. The coolant pump, the seal retainer and the measuring system are defective. Documentation available. An inspection on site is possible.

Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Fan: centrifugal fan Ø 715 mm -Volume output: m³/h -Motor: Dietz 6.8 kW -Speed: 1450 rpm -Protection class: IP 54 -Input: Ø 470 mm -Dimensions: 815/750/H815 mm -Weight: 159 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 310-4-4 -Speed: 1330/1050 rpm -Power: 0.12 kW -Protection class: IP 44 -Dimensions: Ø 310 x 165 mm -Weight: 5.5kg -Quantity: 1 piece available

Ventilator, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, smoke gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, radial fan type DKHR 280-2 -Speed: 2800 rpm -Power: 0.4 kW -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: Ø 280 x 175 mm -Weight: 8.5 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction, radial duct fan -Manufacturer: Maico, radial tube fan type ERR 12/1 -Voltage: 220V -Power: 62 W -Protection class: Iso-Kl.B G 42 -Connection input: Ø 120 mm -Connection output: Ø 125 mm -Fan wheel: Ø 330 x 170 mm -Dimensions: 420/270/H250mm -Weight: 3.5 kg/piece

Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: ebm, radial fan extraction fan -Type: unfortunately without type designation -Voltage: 220V -Speed: 1080 rpm -Inlet: Ø 190 mm -Air duct connection: 285 x 145 mm -Number: 2x blowers available -Price per piece -Dimensions: 360/320/H375mm -Weight: 12 kg/piece

Fan, ventilator, electric motor, blower, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan -Type: R3G250-RK55-05 -Voltage: 48 VDC -Speed: 2250 rpm -Power: 105 W -Number: 2x fans available -Price: per piece -Dimensions: 250/105/H265 mm -Weight: 2.1 kg

bore capacity in steel (diameter): 50 mm arm length: 1.600 mm workpiece height max.: 1.200 mm distance spindle/base plate: 320 - 1.220 mm spindle taper MT: 5 quill stroke: 315 mm throat min.: 350 mm throat max.: 1.600 mm quill feed: 0,04 - 3,20 mm/U drive capacity - spindle motor: 4,0 kW spindle turning speed range: 25 - 2.000 U/min column diameter: 350 mm voltage: 400 V total power requirement: 6,5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,45 x 1,00 x 2,65 m - Serial-No.: 4045935 - Clamping cube 630 x 500 x 500 mm - Coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 1230 mm table surface area: 1200 x 500 mm bore stroke: 180 mm feed - independent: 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds: 60 - 1800 U/min taper MK: 4 total power requirement: 2,7 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder MK 5 Speed range 20-1200 infinitely variable in 3 rows 1/min Feed rate 0.063-0.63 mm/min Projection 300-1250 mm, quill travel 355 mm Distance from spindle head to base plate 375-1375 mm Swivel range boom 360° Connected load 5 kW

taper MK: 3 feed:: 4 Stufen : 2580 x-travel: 2500 mm throat: 1000 mm : 1000/2800 mm weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Table clamping surface: 600 x 1800 mm Height adjustment of the boom: 450 mm small/large drilling radius: 305/1305 mm Spindle holder: SK 40 Quill stroke: 200 mm Spindle speeds infinitely variable: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency-controlled: 5.5 kW electr. Connection: 400 V, 14 kVA Weight: 3400 kg Space requirement: 3800 x 2000 x 2500 mm

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: Hjbkn Asvw D Smeu S Tol LxWxH 2x1.7x1.9 meters / Weight 1900Kg

taper MK: 3 serial number: 4131 throat: 1000 mm documentation: ja clamping: hydraulisch kW weight of the machine ca.: 2,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl

Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity boring approx. 80 mm - Thread cutting up to approx. M 40 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg

bore capacity in steel (diameter): 28 mm arm length: 700 mm workpiece height max.: 1300 mm tool taper: MK3 feeds: 0,1-0,3 mm/U spindle turning speed range: 100-1.220 U/min total power requirement: 1,4 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Csepel RF50/1250 Radial Drilling Machine Robust and proven radial drilling machine of the quality manufacturer "Csepel" model RF50/1250. The machine is characterized by its solid construction and is ideal for locksmiths, workshops or demanding do-it-yourselfers. Technical data (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50/1250 Type of current: 3~ (three-phase current / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse: 16 A slow blow More items - new and used - can be found in our shop! International shipping costs on request!

Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of Make: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Tapping (steel/casting): M25 / M38 Projection (column to spindle centre): 330 – 1,230 mm Headstock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 levels (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Boom height adjustment: 620 mm

bore capacity in steel (diameter): 40 mm arm length: 1050 mm workpiece height max.: - mm turning speeds: 15 - 2800 U/min feed range: 0,075 - 0,45 mm/min dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Control: Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T- ...

bore capacity in steel (diameter): 40 mm arm length: 1.000 mm workpiece height max.: 1.250 mm table-size: 1.150 x 690 mm spindle taper MT: 4 spindle turning speed range: 40 - 1.400 U/min feed range: 0,08 - 0,40 mm/min crossrail adjustment horizontal: 800 mm crossrail adjustment vertical: 700 mm spindle stroke: 220 mm power requirement: 3,5 kW coolant: voltage: 380 V total power requirement: 4,0 kW weight of the machine ca.: 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 640 mm workpiece height max.: 950 mm bore capacity in cast iron: 50 mm threading: . spindle taper MT: 4 turning speeds: 88-1500mm (6x) U/min Feed: mm/U surface area: mm total power requirement: kW weight of the machine ca.: t Max. spindle-to-table distance: 950 mm Min. spindle-to-table distance: 220 mm Quill stroke: 220 mm KW: 1.5 Volts: 380 Machine number: 9028 Included: Clamping cube 600 x 445 x 380 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You c ...

bore capacity in steel (diameter): 65 mm arm length: 2000 mm workpiece height max.: 1800 mm surface area: 900x2000 mm turning speeds: 1400 U/min The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 65 mm arm length: 1600 mm workpiece height max.: 1600 mm surface area: 1800x800 mm turning speeds: 18-1800 U/min Feed: -2,54 mm/U The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: 1500 mm bore capacity in cast iron: 60 mm threading: . diameter of quill: . mm spindle taper MT: 5 turning speeds: 28-2.500 U/min Feed: mm/U surface area: mm total power requirement: kW weight of the machine ca.: t Max. drilling capacity taper: Diameter: 50 mm Max. spindle-to-table distance: 1500 mm Min. spindle-to-table distance: 320 mm Travel spindle: 310 mm KW: 4 Volts: 400 Machine number: 869 Included: Clamping cube 1000x750x500 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machine ...

bore capacity in steel (diameter): . mm arm length: . mm workpiece height max.: . mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: ca. 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26182 Technical data: - Drilling capacity in steel ST 60 approx. 75 mm - Drilling capacity boring approx. 90 mm - Thread cutting up to approx. M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1380 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1750 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Dice table - various mounts + drill - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 8000 kg

bore capacity in steel (diameter): 80 ( 100 ) mm turning speeds: 20 - 1400 U/min spindle taper MT: 6 : Rechts- + Linkslauf quill stroke: 400 mm feed range - spindle: 0,045 - 1,5 mm/U arm length: 1600 mm workpiece height max.: 400 - 1800 mm base plate surface area: 1170 2185 mm accessories:: 2x Würfeltisch+Kühlmittel automatic clamping device electr.: Elektro - Mechanisch total power requirement: 14 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3 x 1,5 x 3,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 75 mm total power requirement: 14 kW weight of the machine ca.: 10 t spindle speed:: 12,5 - 1.600 U / min throat: 2000 mm - capacity at boring: 75 mm ( St 45 ) - spindle diam. 115 mm - taper in spindle: 110 mm/ Morse 6 - distance column to drilling spindel: 500.. . 2000 mm - vertical adjustment of arm: max. 1100 mm - distance column to drilling spindel: 450.. 2000 mm - drilling depth: 450 mm - range of speeds: 12,5 ...1600 U/ min // rpm - feed: 0,63 ... 3,15 mm / U - angle of arm: 360 ° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 300... 1600 mm bore radius max./min: 1800 mm bore capacity in steel (diameter): 56 mm threading: max. 65 mm bore depth: 400 mm tool taper: MK 5 base plate: 1700 x 1000 mm turning speed range - drilling: 14...1800 U/min feed: 0,0315...1,6 m/min total power requirement: 4,5 kW weight of the machine ca.: 7,13 t dimensions of the machine ca.: m Reach: 300 – 1,600 mm Max. / min. drilling radius: 1,800 mm Drilling capacity in steel: 56 mm Tapping capacity: max. M65 Drilling depth (spindle stroke): 400 mm Spindle taper: Morse taper MT 5 Base plate: 1,700 × 1,000 mm Spindle speed range: 14 – 1,800 rpm Feed rates: 0.0315 – 1.6 mm/rev Total power requirement: 4.5 kW Machine weight: approx. 7.13 t Max. distance from spindle head to base plate: 1,600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Höcker Polytechnik Type L 350 radial fan for extracting swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: Motor power: 11 kW Inlet: 350 mm Outlet: 350 mm Air flow rate: 9,770 m³/h Condition: Gebraucht Location: Tauberbischofsheim, Germany

bore capacity in steel (diameter): 60 mm Center of spindle to wall or column: min./max. 320 - 160 mm spindle turning speed range: 20 - 2.500 U/min quill stroke: 310 mm total power requirement: 4 kW weight of the machine ca.: 4.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55 mm arm length: 2500 mm workpiece height max.: - mm total power requirement: 8 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 1 x 3 m Radial drilling machine MK 5 Spindle holder MK 5 Speed range 30 - 1500 min-1 Feed rates 0.05 - 0.6 mm/rev Space requirement approx. 3.7 x 1 x 3 m Weight approx. 5 tonnes (estimated) Working range: MK 5 x 2500 Drive: 3.7 / 6 Sonderpreis 2.900,-- EXW / ab Fundament - Selbstabbau Listenpreis 4.900,-- frei LKW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible.

Offer 26252 Technical data: - Drilling capacity into solid steel ST 60 22 mm - Drilling capacity GG 25 32 mm - Threading ST 60 M 20 - Threading GG 25 M 24 - Drilling spindle holder MK 4 - Quill stroke 140 mm - 18 drilling spindle speeds 60 - 3050 rpm - Drill feeds infinitely variable 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max 420 / 1320 mm - Swivel angle 320 ° - Table size 1200 x 600 mm - Table height 905 mm - mot. Height adjustment / stroke of the drilling column 430 mm - hydr. Columns + Boom Clamp - T – Vertical grooves on the left side of the machine - Coolant device - Drive 400 V / 1.1 / 1.6 kW - Space requirement approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight approx. 1800 kg

Donau Flex 135 Schnellradialbohrmaschine Hersteller: Donau Typ: Flex 135 Schnellradialbohrmaschine Zustand: gebraucht, sehr gut bis neuwertig Baujahr 2020 Stufenlose Drehzahleinstellung Stufenloser Pinolenvorschub Gewindeschneideinrichtung Abmessungen und Verfahrwege Werkzeugaufnahme MK 4 Säulendurchmesser mm 170 Tischabmessung mm 1200 x 600 Anzahl der T-Nuten 4 Abstand der T-Nuten mm 125 Pinolenhub mm 165 Säulenhub mm 450 Bohrleistung ins Volle St 60 mm 35 GG 22 mm 42 Gewindeschneiden St 60 M 30 GG 22 M 36 AC-Motor, frequenzgesteuert kW 4,0 bei 100 % ED. Drehzahlbereich: min -1 20 ? 3200 Vorschub stufenlos mm/U. 0,02 ? 0,7 Maschinenleuchte Spindelschutz

Key data: 30 mm, 700 mm

Radial drilling machine Manufacturer Danube Type DF130 / Danuflex 130 Digital Year of construction 2003 Spindle speed 40 - 3600rpm Feed rate 0.05 - 0.55 mm/rev Column diameter 170mm Quill stroke 170mm Table size 630 x 1200mm Table load 1000kg with 3D button Heidenhain Instruction manual available.

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Drill chuck -Hydraulic clamping -Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900Kg