radial used for sale

Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition

Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition

bore capacity in steel (diameter): 45 mm arm length: 325 / 1000 mm workpiece height max.: ca. 1000 mm spindle taper MT: 4 spindle turning speed range: 40 - 1700 U/min feeds: 0,125 - 1,25 mm/U distance spindle/base plate: 385 / 1400 mm quill stroke: 325 mm crossrail adjustment vertical: 700 mm : 360 ° boring head horiz. adjustable: 675 mm base plate surface area: 1300 x 800 mm total power requirement: 6,2 kW weight of the machine ca.: 3,8 t - autom. feed - right-/left spindle run Accessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 25 - 2000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,5 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 120 mm arm length: 2500 mm workpiece height max.: ca. 1800 mm bore capacity in cast iron: 160 mm drilling radial min./max.: 880 / 2825 mm throat min.: 555 mm column diameter: 650 mm bore spindle diameter /taper: 90 / MK 6 mm diameter of quill: 160 mm bore spindle turning speed range: 10 - 660 U/min bore depth: 650 mm feeds: 0,07 - 3,0 mm/U distance spindle/base plate: min. 300 / max. 2100 mm vertical adjustment of the arm: 1150 mm base plate surface area: 3000 x 1550 mm total height of machine: 4500 mm total power requirement: 15 kW weight of the machine ca.: 16 t - right-/left spindle run - thread cutting device Accessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length:1600 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:2800 x 980 x 3000 mm

Key data: 50 mm, 1500 mm, 1400 mm

Code 231017 Description Radial drilling machine Make MEUSER + CO Model M 50 R Serial No. 39112 Year Capacity in Steel 60 50 mm Capacity in Cast Iron 60 mm Thread cutting in Steel 60 M 45 Thread cutting in Cast Iron M 55 Spindle taper 5 MC Spindle radius: max/min 1700/600 mm Spindle traverse 1100 mm Min / Max height spindle / top of base plate 500 / 1400 mm Arm truss 600 mm Quill stroke 310 mm Number of speeds 18 Spindle speed range 25 – 2000 rpm Number of spindle feeds 14 Spindle feed range 0.06 – 0.80 mm/rev Baseplate size 2400 x 860 mm Clampsurface base plate 1700 x 860 mm Main motor 5 kW - 380 Volts Dimension of machine 2400 x 1100 x 2800 (3100) mm ( L x W x H ) Weight 4070 kg Accessories Box 650 x 500 x500 mm Coolant Hydraulic clamping Conditon Machine is in very good and nice condition

Key data: 40 mm, 1007 mm

Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition

Maximum drilling capacity in steel/casting 63/80 mm The maximum drilling diameter in steel 300 mm leadership Maximum distance spindle axis to the leadership mantle 2000 mm Vertical adjustment arm 950 mm spindle speed - The number of stages 16 - Range from 11 to 2000 /min Main engine power of 5.5 kW Total input 8,5 kVA Weight 7100 kg

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,7 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5

Offer 24130 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

Key data: 60 mm, 1600 mm

virgin Solid design, guide tracks on the boom hardened and ground, Stepless speed control, digital speed display Specifications: Drilling capacity max. 60 mm Threading up to M 46 Projection 350 - 1600 mm Vertical movement of the boom 585 mm Drilling head travel (horizontal) 1250 mm Quill stroke 325 mm Tool holder MK 5 Speed range (2) 38 - 275 / 275 - 2000 rpm Feed range (8) 0.06 - 1.00 mm/rev Distance spindle/cube table 165 - 750 mm Distance spindle/base plate 665 - 1250 mm Clamping surface base plate 1740 x 980 mm Cube table 750 x 500 x 500 mm incl. accessories: - Dice table - Drill chuck mandrel MK5 / B16 - Reducing sleeves MK5/4 MK4/3 MK3/2 - LED machine light - Coolant device - Digital speed display - Height-adjustable protective cover - Operating tool - Operating instructions, CE declaration of conformity

Specifications: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 30 - Threading GG 25 M 40 - Drilling spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drill feeds 0.1 - 0.45 mm - min./ max. distance spindle – table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg -with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the left side of the machine

Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515721 / 186781/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515722 / 188445/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR35C-ZID.DC.CR Item number: 7515723 / 188443/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR35C-ZID.DG.CR Item number: 7515724 / 188446/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DG.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm 0P2Fdo3 - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

Drilling capacity 45mm Table size : 1200 x 560 mm Drilling capacity 45mm Spindle Holder MK 4 Quill stroke 170mm Speed / Steps 70-2000 rpm Feed / Steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

MAS VR5A, Radial drill, 1500mm arm, MT 4, low price, Can be inspected under power in our warehouse, Arm : 1600mm, Weight : Weight 3,7 Ton, Spindelmotor: 4 kW - 28 - 2500 RPM, Clamiping area : 1800 x 1000, Max dia in steel : 50mm, Max dia in cast iron: 60mm, Max threading in steel : M30, Max threading in cast iron : M42, Distance table spindle nose : 1600 mm

Radial piston flow divider JAHNS MT-GM1 Dimensions: 470 x 290 x 290 mm

Radial Piston Pump, Hydraulic Pump BOSCH 0514 300 421 ( 0514300421 ) Shaft diameter: 25 mm New ! Dimensions: 360 x 215 x 185 mm

spindle turning speed - stepless: 26 - 1650 U/min voltage: 380 V 0: 50 Hz rated current: 15 A connected load: 6,5 kW tool taper: MK 4 weight of the machine ca.: 2,3 t dimensions of the machine ca.: 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1100 mm workpiece height max.: ca. 1000 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 28 - 2500 U/min feeds: 0,05 - 2 mm/U quill stroke: 300 mm distance basic plate - spindle nose: 630 - 1380 mm crossrail adjustment vertical: 750 mm total power requirement: 6 kW weight of the machine ca.: 4 t dimensions of machine L x W x H: 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. Drilling Diameter... 50mm Spindle holder ... ISO 50. Max. vertical arm adjustment ... 875mm Max. distance of the spindle axis from the stand ... 1250mm Main engine power ... 4kW Total power requirement ... 6kVA L x W x H ... 2750 x 1120 x 3271mm Machine weight ... 4550kg

Bohrleistung in Stahl (-Ø: 35 mm throat: 1000 mm workpiece height max.: 200 - 1400 mm height adjustment: 745 mm base plate surface area: 1200 x 930 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mm turning speed range: 60 - 1850 U/min feed range: 0,09 - 1 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,7 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m Cube table 800 x 800 x 650 mm Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

: 50 mm : 1275 mm : 1330 - : MK 5 bore depth: 270 mm spindle turning speed range: 44-1206 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50,0 mm arm length: 1.350 mm workpiece height max.: 1630 mm turning speeds: 19 - 1320 U/min bore spindles - Morse Taper: 5 MK engine output: 5,5 kW weight: 5 t range L-W-H: 2,4 x 1,0 x 3,55 mm feed movement: 475 mm floor plate size:: 1650x1000 mm feeds: 0,07-2,9 mm/U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.

: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 1000 mm workpiece height max.: 1400 mm total power requirement: 6 kW weight of the machine ca.: 3.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm arm length: 1000 mm workpiece height max.: - mm total power requirement: 5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,4 x 1,2 x 3 m Vertical movement not functional No. 4656 Radial drilling machine MK 4 make OOYA, type RE 2 - 1300 A Year of manufacture 1978 Working area: MK 4 x 1000 x 660 mm Spindle holder MK 4 Speed range 32 - 1655 min-1 ( 50 Hz ) Space requirement approx. 1.2 x 2.4 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23 mm spindle taper: MK 2 spindle stroke: 130 mm arm length: ca. 860 mm table-size: 1280 x 500 mm surface area: ca. 1250 x 480 mm turning speed range: 115 - 2400 U/min workpiece height max.: ca. 535 mm boring chuck: Schnellspannfutter 1-13 weight of the machine ca.: 690 kg total power requirement: 1 kW range L-W-H: ca. 1300 x 1800 x 2100 mm Distance spindle center - stand center (projection): approx. 860 mm Distance table quill (workpiece height): max. 535 mm Adjustability of the horizontal/vertical arm: approx. 300 - 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 55 mm arm length: 2005 mm workpiece height max.: 1500 mm table-size: 1500 x 800 mm spindle taper MT: 5 spindle turning speed range: 30-1200 U/min feed range: 0,06 - 1,0 mm/U crossrail adjustment horizontal: 495 - 2.000 mm crossrail adjustment vertical: 505 - 1670 mm spindle stroke: 310 mm column diameter: 360 mm distance spindle/base plate: 825 - 1670 mm power requirement: 4,4 kW voltage: 400 V total power requirement: 7,2 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,00 x 0,80 x 2,80 m - Pole-changing motor with 2 speeds - right / left rotation - machine light - Cube table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used

Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible.

bore capacity in steel (diameter): 32,0 mm arm length: 310 - 820 mm workpiece height max.: 370 - 870 mm turning speeds: 75 - 1220 U/min spindle taper MT: 4 MK base plate: 825 x 690 mm threading: 24 M quill stroke: 250 mm quill feed: 0,1/0,16/0,25 mm/U travel x / y: 500 / 510 mm total power requirement: 2,25 kW weight of the machine ca.: 1200 kg. range L-W-H: 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - ...

bore capacity in steel (diameter): 50,0 mm arm length: 350 - 1.590 mm workpiece height max.: 645 - 1.240 mm turning speeds: 25 - 2000 U/min spindle taper MT: 5 MK base plate: 980 x 1.600 mm threading: 42 M quill stroke: 320 mm total power requirement: 4,0 kW weight of the machine ca.: 3.500 kg. range L-W-H: 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED mach ...

bore capacity in steel (diameter): 60,0 mm arm length: 350 - 1.600 mm workpiece height max.: 665 x 1.250 mm turning speeds: 38 - 2.000 U/min spindle taper MT: 5 MK base plate: 960 x 1.760 mm threading: 42 M quill stroke: 325 mm total power requirement: 4,0 kW weight of the machine ca.: 3.800 kg. range L-W-H: 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U drilling capacity steel/cast iron: mm power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drilling machine BR 56 x 1600 Year of construction: approx. 1965 (estimate) equipped with coolant device and drilling table as optional accessories

Witzig & Frank high-speed radial drilling machine LEO 32 AS Defects: (clamping no longer works, running noises present)

Drilling capacity (steel): 50mm, spindle speed: 1700rpm, reach: 45mm-1500mm, workpiece height range: 470mm-1500mm, sleeve stroke: 680mm, quill stroke: 350mm, spindle taper: MK5, max. tool weight: approx. 30kg. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm, weight: approx. 4000kg. An on-site inspection is possible.

bore capacity in steel (diameter): 80 mm arm length: 2000 mm workpiece height max.: ca. 1300 mm borehole diameter: in Stahl 80 mm borehole diameter: in Guss 100 mm threading in St 60: M 68 mm spindle turning speed range: 16 - 1250 U/min Spindle Speed: 32 Stück spindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mm number of feeds: 18 feed: 0,06 - 3,0 mm/U distance spindle/base plate: 480 bis 1800 mm column diameter: 500 mm spindle drive: 11 kW stroke drive: 4 kW total power requirement: 15 kW weight of the machine ca.: 8500 kg base area: 3190 x 1250 x 3600 mm with work table 1200 x 1200 x 720 mm, weight approx. 800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.