radial saw used for sale

Towing radial, Mk 4, universally adjustable

Spindle cone MK 4 Machine weight approx. 2.5 t Space requirements approx. 2.2 x 0.7 x 2.5 m

Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx. 9100 mm Width (with electrical cabinets an ...

CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New CNC Control SIEMENS SIMATIC Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 16 ...

CNC Radial Forging Machine GFM mod. SXL-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipu ...

used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg

VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg

Radial Forging Machine GFM SXL-32 The main equipment includes: - Manipulator A - Manipulator B - GFM 32 forging machine - N° 2 loading and unloading clamps - Transport roller track Technical data: - No. of forging hammers: 4 - Forging pressure of each hammer: 500 Mp = 5,000 bar - N° of strokes for each hammer: 310 strokes/min - Rated power each forging motor: 2 x 250 kW - Hydraulic pump motor power: 100 kW - Loading - unloading pincers motor power: N° 2 x 37 kW - Hammer length: 480 mm - Maximum raw piece diameter: 320 mm - Max hammer adjustment area: 210 mm - Largest forging diameter: Non-alloyed and low-alloy construction steel: 320 mm/Ø ….. 290 mm/Ø Biggest clamping diameter in clamping head: 320 mm High and special-alloyed steels: smaller dimensions - Max workpiece length: 3000 mm - Rapid traverse spee ...

Key data: 55 , 1250 , 400

Extension 1250 mm

Extension 1600 mm

Specifications: - Drilling capacity in steel ST 60 approx. 50 mm - Thread cutting up to approx. M 50 - Drilling spindle holder MK 5 - Drilling spindle stroke 300 mm - Radius min. / max. 320 / 1600 mm - Column diameter 320 mm - Boom stroke 650 mm - min / max – distance: - Spindle – base plate approx. 600 - 1250 mm - Machined base plate clamping surface approx. 1000 - 1700 mm - 18 spindle speeds 40 - 1800 rpm - 8 feeds 0.04 - 0.63 m/rev - Drilling spindle drive 400 V / 7.5 kW - E – hydraulic central clamping - Cube table with machine vice - Coolant device - Space requirement approx. W 2400 x H 2950 x D 1050 mm - Weight approx. 3500 kg

Radial drilling table Dimensions LxWxH 600 x 750 x 550 mm Tilting 0o - 90o This radial drilling table is unused

Axial Coupling Pumps / Radial Piston Pumps / Hydraulic Pumps Rexroth Hydraulics SY2DFE1-20/071-018/00749487+00079937 Rexroth Hydraulics SYDFE-20/071-018/...+00079937 Rexroth Hydraulics SYDFEE-11/71RKB4-10V3CX2M-040 MANNESMANN REXROTH SYDFEE-1X/71RN00-10E3CX2M-002 MANNESMANN REXROTH SYDFEE-10/71RKB4-10E3CX2M-027 BOSCH 0 514 700 543 MOOG Mod D954z8001 /H Type: HZ-R18A1-RKP063KM28R1Z00DS1 MOOG Mod D956Z8001 /H Type: HZ-R18A1-RKP100TM28R1Z00DS1 BOSCH 2 518 217 749 Arburg A10VSO 18 DR/31R-PRA12N00-SO109 MOOG Mod D953Z8001/C Type HZ-R18A1-RKP045KM28R1Z00DS1 Arburg A10VSO 18 DFR1/31R-VRA12KB2-S2761 MOOG D-71034 0 514 600 085 MOOG Mod D953-0053/B D953-2073/A Type: HP-R18B1-RKP045KM28E2Z00DS1 BOSCH 2 518 216 539 (328 314) BRUENINGHAUS HYDROMATIK A10VSO 28 DRG/31R-PPA12K25-SO983 Arburg A10CSO 45 DFR1/31R-PPA12KB2-S1894 MANNESMANN REXROTH SYDFEE-10/45RN00-10V2KXM Rexroth Hydrau ...

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic clamping  ...

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good  ...

Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

bore capacity in steel (diameter): 32 mm arm length: 410 - 1000 mm workpiece height max.: 765 mm coolant: ja boring spindle diameter: 38 mm diameter of quill: 70 mm spindle stroke: 225 mm boring spindle: MK 4 mm/min spindle turning speed - stepless: 70 - 2000 U/min feed range - spindle: 0,04 - 0,32 mm/U column diameter: 225 mm bore radius max./min: max. 1130 mm table surface area: 630 x 1320 mm height adjustment: 500 mm base plate: 1500 x 1000 mm T-slots: 4 Stück T-slot - distance: 18 mm total power requirement: 2,2 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m shift of supports: 590 mm without turntable and tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1500 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 2000 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,8x4,5x3,4 m Brand: Batliboi Type: BPR-50 Boiler radial drilling machine Capacity: 50 mm Throat depth: 2.000 mm Spindle taper: MK5 Stroke: 350 mm Drilling Spindle: 75 mm ø Head in degrees adjustable Speed min: 16 RPM Speed max: 800 RPM Clamping surface: 2.610 x 1.050 x 260 mm Machine dimensions (lxwxh): 5.740 x 4.450 x 3.397 mm Machine weight: 6.570 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rapid radial / Rapid radial / Snel radial DANUBE DR 13

Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm

The radial fan is unused and has not been installed. For further technical details, please refer to the type plate. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan type R2E133-BH66-25 -Voltage: 230V -Speed: 2800 rpm -Power: 24 W -Dimensions: 205/70/H185 mm -Weight: 1.2 kg

Three-phase motor, electric motor -Manufacturer: Elektror, electric motor for radial fan type D-06 / S484 -Power: 0.5 kW -Speed: 2800 rpm -Shaft: Ø 14 x 35 mm -Protection class: B TROP -Dimensions: 295/200/H150mm -Weight: 6.5 kg

Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radial drill Manufacturer: Archdahle

Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition

Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition

Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction -Manufacturer: ebmpapst, Radial fan type R2E133-BH66-34 -Voltage: 230 V -Speed: 2700 rpm -Power: 25 W -Dimensions: Ø 134 x 90 mm -Weight: 0.6 kg

Radial drilling machine, used Manufacturer: KOVOSVIT Type: VO 50 Year built:1999 Projection: 1600 mm Drilling capacity: 60 mm Quill stroke 310 mm Table / footprint 1470 x 986 mm Weight: approx. 5 t

bore capacity in steel (diameter): 40 mm arm length: 1.000 mm workpiece height max.: 1.250 mm table-size: 1.150 x 690 mm spindle taper MT: 4 spindle turning speed range: 40 - 1.400 U/min feed range: 0,08 - 0,40 mm/min crossrail adjustment horizontal: 800 mm crossrail adjustment vertical: 700 mm spindle stroke: 220 mm power requirement: 3,5 kW coolant: voltage: 380 V total power requirement: 4,0 kW weight of the machine ca.: 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 45 mm arm length: 325 / 1000 mm workpiece height max.: ca. 1000 mm spindle taper MT: 4 spindle turning speed range: 40 - 1700 U/min feeds: 0,125 - 1,25 mm/U distance spindle/base plate: 385 / 1400 mm quill stroke: 325 mm crossrail adjustment vertical: 700 mm : 360 ° boring head horiz. adjustable: 675 mm base plate surface area: 1300 x 800 mm total power requirement: 6,2 kW weight of the machine ca.: 3,8 t - autom. feed - right-/left spindle run Accessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 25 - 2000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,5 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 120 mm arm length: 2500 mm workpiece height max.: ca. 1800 mm bore capacity in cast iron: 160 mm drilling radial min./max.: 880 / 2825 mm throat min.: 555 mm column diameter: 650 mm bore spindle diameter /taper: 90 / MK 6 mm diameter of quill: 160 mm bore spindle turning speed range: 10 - 660 U/min bore depth: 650 mm feeds: 0,07 - 3,0 mm/U distance spindle/base plate: min. 300 / max. 2100 mm vertical adjustment of the arm: 1150 mm base plate surface area: 3000 x 1550 mm total height of machine: 4500 mm total power requirement: 15 kW weight of the machine ca.: 16 t - right-/left spindle run - thread cutting device Accessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 50 mm, 1500 mm, 1400 mm

Code 231017 Description Radial drilling machine Make MEUSER + CO Model M 50 R Serial No. 39112 Year Capacity in Steel 60 50 mm Capacity in Cast Iron 60 mm Thread cutting in Steel 60 M 45 Thread cutting in Cast Iron M 55 Spindle taper 5 MC Spindle radius: max/min 1700/600 mm Spindle traverse 1100 mm Min / Max height spindle / top of base plate 500 / 1400 mm Arm truss 600 mm Quill stroke 310 mm Number of speeds 18 Spindle speed range 25 – 2000 rpm Number of spindle feeds 14 Spindle feed range 0.06 – 0.80 mm/rev Baseplate size 2400 x 860 mm Clampsurface base plate 1700 x 860 mm Main motor 5 kW - 380 Volts Dimension of machine 2400 x 1100 x 2800 (3100) mm ( L x W x H ) Weight 4070 kg Accessories Box 650 x 500 x500 mm Coolant Hydraulic clamping Conditon Machine is in very good and nice condition

Key data: 40 mm, 1007 mm

Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,7 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum drilling capacity in steel/casting 63/80 mm The maximum drilling diameter in steel 300 mm leadership Maximum distance spindle axis to the leadership mantle 2000 mm Vertical adjustment arm 950 mm spindle speed - The number of stages 16 - Range from 11 to 2000 /min Main engine power of 5.5 kW Total input 8,5 kVA Weight 7100 kg

Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5

Auction-ID: A1-47380-188

Auction-ID: A1-47380-1007

Offer 24130 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

Key data: 60 mm, 1600 mm

virgin Solid design, guide tracks on the boom hardened and ground, Stepless speed control, digital speed display Specifications: Drilling capacity max. 60 mm Threading up to M 46 Projection 350 - 1600 mm Vertical movement of the boom 585 mm Drilling head travel (horizontal) 1250 mm Quill stroke 325 mm Tool holder MK 5 Speed range (2) 38 - 275 / 275 - 2000 rpm Feed range (8) 0.06 - 1.00 mm/rev Distance spindle/cube table 165 - 750 mm Distance spindle/base plate 665 - 1250 mm Clamping surface base plate 1740 x 980 mm Cube table 750 x 500 x 500 mm incl. accessories: - Dice table - Drill chuck mandrel MK5 / B16 - Reducing sleeves MK5/4 MK4/3 MK3/2 - LED machine light - Coolant device - Digital speed display - Height-adjustable protective cover - Operating tool - Operating instructions, CE declaration of conformity

bore capacity in steel (diameter):1-13 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm

bore capacity in steel (diameter):50-60 mm arm length:1.600 mm weight of the machine ca.:5-7 t spindle taper MT:wahrscheinlich MK5