radial saw used for sale

2 radial drilling machine tables made of cast ironTechnical specifications:External dimensions approx .: 710 x 710 x 500 mmSurface with 5 T-slots: 710 x 500 mm1 vertical surface with 5 T-slots: 710 x 500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Radial Drilling GSP 49S22 Spindle: Ø 125 mm Cone CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: 600 mm Total column height: 3000 mm Spindle motor: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Total weight: 12 T

Equipped with feed and output roller conveyor, overhead radial arm saw, Holzmann ABS 2480 dust collector with insert.

Includes wooden table and tool grinding machine

Equipped with ELGO electronic digital linear position sensor

Equipped with table (3800x830x900 LxWxH in mm), saw blade. Must be dismantled by the buyer.

Equipped with tilt adjustment

equipped with HM-A roller table with MPS digital position measurement system, shortcut length max. 5050mm; Disconnect with flexible hose

Makita MLS100N Radial arm saw Saw blade diameter 255x260mm Shaft hole 30mm Max saw cap. 130mm at 0 degrees Max saw cap. 90m at 45 degrees

Underlying radial arm saw, cuts lengths of 8m, maximum cutting height 160mm, automatic feed system, 6500mm feed conveyor, 4000mm outfeed conveyor. Including filter extraction system. Including handbook. The original monitor is defective, comes with an inappropriate replacement monitor. Please note! The buyer is responsible for the dismantling and loading, after dismantling the threaded rods must be ground down and any electrics must be insulated.

SECOND-HAND RADIAL ARM SAW LYONFLEX - volt. 380/50

Conventional radial sawing machine with manual (M) or electromotor (E) saw unit feed and saw blade - up and down movement for machining marble, granite, ceramics and other hard materials by sawing (optionally also by drilling) - brand new Largest cutting length - horizontal 90° - 700 mm +/- 45° - 600 mm Saw blade tipping area manually adjustable up to 45° Saw blade diameter 350 mm Largest workpiece thickness to be sawn 100 mm Largest workpiece passage under the saw blade 140 mm Saw drive power 2.2 kW / 230V Saw blade speed 1,400 rpm Dimensions 1.85 x 1.83 m x H 1.87 m Weight 450 kg. Facilities: - Inlet and outlet roller conveyor length 1 m x width 500 mm - with 5 rollers - Laser beam for sawing on crack - 1 adjustable stop Optional: - Manual drill mounted on the radian arm - Digital position display - Continuously adjustable saw blade speeds

Air pressure max: 7 bar, length of inlet conveyor approx. 880cm, length of discharge conveyor approx. 300cm, equipped with automatic supply, Elumatic type SAP 142 / E550 positioning control, inlet protection. Please note! Machine is working but has occasional start-up problems. Please note! The buyer is responsible for the dismantling and loading, after dismantling the threaded rods must be ground down and any electrics must be insulated. Pick up 01-05-2024 from 09.00-15.00 hrs, start dismantling 09.00 hrs.

Including inlet conveyor with stop L approx. 295cm, discharge conveyor L approx. 300cm. Includes handbook and handbook for feeder and stop conveyors.

left-hand equipped with manually adjustable two-piece stop, maximum range 4200 to 6200 mm; equipped with pneumatic / manual material clamp; coolant liquid pump; mitre adjustable; saw blade diameter 315 mm; capacity solid square 50 mm; capacity solid round 55 mm; capacity square 100 mm; capacity around 110 mm;

Plug is missing

unused

Equipped with: metabo ksu 251 chassis.

Equipped with 2x pneumatic locking clamp

Shaft hole: 30mm. Without drain conveyor and table

Table type: DE7032, extendable to 3750 mm

Equipped with laser and DeWalt chassis

Double mitre

unused with case

Ø shaft hole 30mm, with tilt adjustment

Equipped with Milwaukee aluminum saw blade; on and including wooden workbench; Size total approximately 120x70x120cm.

SPECIFICATIONS Saw blade diameter: 350 mm Installed capacity: 5 Hp Motor speed: 3000 / 380 volts

Description: Machine number 510221, motor 3.5 kW, saw blade diameter max. 400 mm, cutting depth approx. 560 mm, roller conveyor right side length 2000 mm, left side length 2450 mm Approx. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 1,700 mm, weight approx.: 50 kg

Description: Cutting capacity 800 mm Fully restored motor Blade 300 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 1,400 x 1,400 mm, weight approx.: 200 kg

Description: 350 mm diameter blade Cutting capacity 900 mm Rope for automatic carriage return Approx. Onsite Dimension. (l x w x h): 1,300 x 1,700 x 1,500 mm, weight approx.: 200 kg