british flag
Resale Logo

rack used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used and reconditioned Diesel and Gas Generators  ALL POWER SOLUTION  http://www.allpowersolution.com 
banner logo
start page > keywords rack > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465350 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125460523 1900

ABUS for sale
Overhead Bridge Crane 20.0 t


Weight approx.: 5200 kgDimensions (l x w x h) approx.: 8500 x 2400 x 1500 mmDescription: Hoist GM5200H6-200.41.103.D, load capacity 20 t, serial number 18/750343, clamping width 8260 mm, crane type ZLK, crab track gauge  ...
used machine
 
Weight approx.: 5200 kg
Dimensions (l x w x h) approx.: 8500 x 2400 x 1500 mm
Description: Hoist GM5200H6-200.41.103.D, load capacity 20 t, serial number 18/750343, clamping width 8260 mm, crane type ZLK, crab track gauge 1600 mm, with pedestrian control, test book is available
1997
used machinery auction RESALE 4,800 €  
  DE   request
125465332 2444

ACHS-ANHÄNGER O3) Achleitner 2AANH5 for sale


last off Code: BH-92240 Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer Matriculation year: 14.12.1989 Test badge: no inspection sticker must be acquired by the buyer p ...

 
last off Code: BH-92240
Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer
Matriculation year: 14.12.1989
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
FIN.: 7240
Weight/payload/total weight: 2,800/5,200/7,800 kg
Color: grey
Construction: Flatbed
Facilities: With tarp
Documentation: types of licence available
Comments to the State: rusted axles, brake system Pneumatic hoses are cracked, heavily rusted tow bar and rotating ring recording, number plate lights yellowed, rusted frame and springs, various rust and paint damage all around vehicle, div. Abrasions all around and in the vehicle, expressly pointed out is that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2330-0-200-0040
 
Price  
    request
125460543 1900

Workbenches


Weight approx.: 450 kgDimensions (l x w x h) approx.: 2000 x 1500 x 1100 mmDescription: 2 pcs., 1 x work surface 2000 x 740 mm, with vice, jaw width 125 mm, 1 x work surface 1900 x 700 mm, with mounted vice, jaw width 14 ...

 
Weight approx.: 450 kg
Dimensions (l x w x h) approx.: 2000 x 1500 x 1100 mm
Description: 2 pcs., 1 x work surface 2000 x 740 mm, with vice, jaw width 125 mm, 1 x work surface 1900 x 700 mm, with mounted vice, jaw width 140 mm, contents: bracket, shackles in different sizes, see photos for details
 
used machinery auction RESALE 105 €  
  DE   request
125465330 2486

PKW M1) VW Golf for sale


last off Code: BH-67005 Matriculation year: 11.04.2006 elapsed. Mileage: not readable Power: 74 kW Displacement: 1.896 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a ...

 
last off Code: BH-67005
Matriculation year: 11.04.2006
elapsed. Mileage: not readable
Power: 74 kW
Displacement: 1.896 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 1J/ACAXRX0/FM5FM52J067N1N1
FIN: WVWZZZ1JZ6W018023
Equity / total weight: 1,353/1.900 kg
Color: white
Body: hatchback
Equipment: 5-speed manual transmission, CD player, fabric outfit, Electr. Power Windows front and rear, roof rails with special transport lamps design
Tyres: tyres 2 x
Documentation: types of licence available
Key: 1
Comments to the State: rusted exhaust main silencer hull rusted through, easily leaking charge pressure control valve, coupling on the wear limit, div. axle and suspension parts wheel bearing rusted, broken front, grease with Tracking joint sleeve, starter motor running after frame has oxidation, rusted Springs, camber plates left front damaged, battery deep probably emptied or defective, purchased to cover on seats already by worn, rusty spots on hood and front Wheel arches, abrasions at front apron, small dents at wheel arches front right with rust spots, abrasions in the rear apron and loading area for tailgate, sticker residue, abrasions at front bumper front left,.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2310-0-200-0310 and 2310-0-550-0194
 
Price  
    request
125460547 1900

Workbench with Contents


Weight approx.: 380 kgDimensions (l x w x h) approx.: 2800 x 1100 x 1100 mmDescription: Worktop consisting of steel, dimensions 2800 x 680 mm, contents: length gauges, brackets, max. bracket: 2000 x 1000 mm, spirit level ...

 
Weight approx.: 380 kg
Dimensions (l x w x h) approx.: 2800 x 1100 x 1100 mm
Description: Worktop consisting of steel, dimensions 2800 x 680 mm, contents: length gauges, brackets, max. bracket: 2000 x 1000 mm, spirit levels, hammers, see photos for details
 
used machinery auction RESALE 105 €  
  DE   request
125465310 901

ZUGMASCHINE T1) Steyr Daimler Puch 760 a for sale


last off Code: BH-80088 First registration: 18.12.1979 elapsed. Hours of operation: 4.208 h Output: 44 kW Displacement: 1,140 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to Â&se ...

 
last off Code: BH-80088
First registration: 18.12.1979
elapsed. Hours of operation: 4.208 h
Output: 44 kW
Displacement: 1,140 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 295.05-3685
Equity / total weight: 2,517/4,500 kg
Color: grey
Facilities: with headlamps above installed, safety signal lamp
Tyres: Max. Axle load front 1,750 kg, allowed axle load rear 2.300 kg, documentation: licence of types of available key: 1
Comments to the State: motor does not start, gearbox is leaking, axes are leaking, corrosion game on the steering linkage and steering column, have strong bearing clearance at rear axle, brake lines and hoses partly rusted and cracked, Total failure cable fire, batteries, frame has some significant corrosion damage, hydraulic system results in oil loss, paint largely bleached out, div. Rust all around vehicle, abrasions, and dents all around vehicle, rust spots on wheels,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2420-0-350-0014 and 2420-0-550-0005
 
Price  
    request
125460561 1900

Lot of Clamping Brackets


Weight approx.: 150 kgDimensions (l x w x h) approx.: 1000 x 900 x 300 mmDescription: 5 pcs., clamping bracket and clamping cube, see photos for details

 
Weight approx.: 150 kg
Dimensions (l x w x h) approx.: 1000 x 900 x 300 mm
Description: 5 pcs., clamping bracket and clamping cube, see photos for details
 
used machinery auction RESALE 45 €  
  GB   request
125465304 2419

SPEZIALKRAFTWAGEN N1) VW Hochraum-Kasten Allrad for sale


last off Code: BH-70507 First registration: 01.04.1992 elapsed. Mileage: 115.698 km Output: 51 kW Displacement: 1,588 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, ...

 
last off Code: BH-70507
First registration: 01.04.1992
elapsed. Mileage: 115.698 km
Output: 51 kW
Displacement: 1,588 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 251/4WD bra
FIN: WV2ZZZ25ZLG114490
Equity / total weight: 2,060/2,600 kg
Color: Green
Construction: closed
Number of seats: 3 (front)
Facilities: 4-speed manual transmission, manual window regulator front, all-wheel drive
Documentation: types of licence available
Key: 1
Comments to the State: clutch faulty, glow candles defective (stabilizer rubber cracked), drive shaft sleeves front left and right torn, brake discs front brake line run, behind rusty, slightly dented side door, sliding door and right,. Front slightly dented bumper, dented corner rear left, side panel rear left scratched, dent on passenger door and gutter, entry front left rusted through, fender of rear left rusted through, div. differences in colour paint, dents and abrasions all-round vehicle.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-300-0132 und2320-0-550-0083
 
Price  
    request
125460581 1900

Workshop Rack with Twist Drills and Accessories


Weight approx.: 450 kgDimensions (l x w x h) approx.: 3300 x 480 x 1800 mmDescription: Drill bits up to 60 mm diameter, reamers, files and further accessories, see photos for details

 
Weight approx.: 450 kg
Dimensions (l x w x h) approx.: 3300 x 480 x 1800 mm
Description: Drill bits up to 60 mm diameter, reamers, files and further accessories, see photos for details
 
used machinery auction RESALE 120 €  
  DE   request
125452364 107

SCHNUTZ RMH 18/40/23-2000 Z for sale
Straighteners


Yield strength (0.2) Max/tensile strength (0.2) Max: 400 N / mm² Band thickness/strip thickness: (0.3)... 0.4... 2.0 mm Setting rollers number/no. of straightening rolls: 23 St. / no. Reel diameter/dia.of  ...
used machine
 
Yield strength (0.2) Max/tensile strength (0.2) Max: 400 N / mm²
Band thickness/strip thickness: (0.3)... 0.4... 2.0 mm
Setting rollers number/no. of straightening rolls: 23 St. / no.
Reel diameter/dia.of straightening rolls: 40 mm
Bale length setting rollers/body length straightening rolls: 2,235 mm
Number of intermediate rollers / no. of intermediated-rolls: 25 PCs / no.
Bale length intermediate rolls / body length intermediated rolls: 2,140 mm
In outriggers, hydr. adjustable/lower support hydr. adjustable: 9 St. / no.
Upper braces fix. / upper support fix.: 9 St. / no.
Number of track rollers/no. support of rolls: 243 St. / no.
Support rollers diameter/slide. support of rolls: 41 mm
Bale length support rollers/body length support rolls: 128 mm
Speed Max / max speed: 60m / min
Total weight/complete weigth: 13.2000 kg

High-band straightening machine / high production-strip leveling machine
Machine without electrical / machine withourt electric material:
Cold-rolled steel, varnished, plastic-coated, electrolytic and hot-dip galvanized
Surface, aluminium / CU / Zn/stainless steel / /.
steel cold rolled, painted, PVC-coated, galvanised surface, Al / Cu / Zn/inox
2002
Price  
    request
125460601 1900

Workbench with Contents


Weight approx.: 250 kgDimensions (l x w x h) approx.: 2000 x 950 x 1050 mmDescription: With robust wooden plate 2000 x 700 mm, mounted vice, jaw width 150 mm, contents: various measuring instruments, consisting of calipe ...

 
Weight approx.: 250 kg
Dimensions (l x w x h) approx.: 2000 x 950 x 1050 mm
Description: With robust wooden plate 2000 x 700 mm, mounted vice, jaw width 150 mm, contents: various measuring instruments, consisting of calipers, depth gauges, marking compasses, brackets, see photos for details
 
used machinery auction RESALE 45 €  
  DE   request
125452235 107

STROJARNE PIESOK NTC 2000/4 for sale
Guillotine Shears


Guillotine shears STROJARNE PIESOK NTC 2000/4 were manufactured in 1987. The shears enable cutting materials of various strengths such as steel, aluminum, copper, etc. With materials with a strength of more than 450 MPa, ...
used machine
 
Guillotine shears STROJARNE PIESOK NTC 2000/4 were manufactured in 1987. The shears enable cutting materials of various strengths such as steel, aluminum, copper, etc. With materials with a strength of more than 450 MPa, the cut material thickness must be reduced accordingly. In the case of lower strength than 450 MPa, materials of greater thickness can be cut, the refraction of which does not exceed 8 mm.

Thickness of the material to be cut depending on strength:
aluminum 200 MPa: 6 mm
copper 250 MPa: 5.3 mm
nickel 400 MPa: 4.2 mm
steel 450 MPa: 4 mm
steel 500 MPa: 3.8 mm
brass 600 MPa: 3.4 mm
steel 700 MPa: 3.2 mm
steel 800 MPa: 3 mm

Technical parameters of the NTC 2000/4 guillotine:
- maximum sheet thickness at pt = 450 MPa: 4 mm
- maximum cutting length: 2050 mm
- cutting angle: 1.33 degrees
- overhang in stands: 200 mm
- number of continuous idling strokes: 60 1 / min
- minimum sheet thickness: 0.4 mm
- minimal width of the web: 10s mm (s-thickness of sheet)
- maximum radius of knife curvature: 0.05s mm (s-thickness of sheet)
- cutting on the rear bumper, maximum width without brackets: 300s mm (s-thickness of sheet)
- rear bumper position: 4-750 mm
- installed power: 5 kVA
- main engine power: 4 kW
- bumper motor power: 0.25 kW
- dimensions of the device (length x width x height): 2600 x 1600 x 1500 mm
- guillotine weight: 3400 kg
- foot pedal
- DTR, technical and operational documentation
1987
6,125 €  
  PL   request
125460613 102

MASHSTROY C 11 TH 80 for sale
Center Lathe


Weight approx.: 3400 kgDimensions (l x w x h) approx.: 4600 x 1300 x 1600 mmDescription: Bed length approx. 3500 mm, turning diameter over bed approx. 680 mm, over support 560 mm, with 3-jaw chuck, diameter 400 mm, speed ...
used machine
 
Weight approx.: 3400 kg
Dimensions (l x w x h) approx.: 4600 x 1300 x 1600 mm
Description: Bed length approx. 3500 mm, turning diameter over bed approx. 680 mm, over support 560 mm, with 3-jaw chuck, diameter 400 mm, speed range 11.5 to 2000 rpm, with accessory cabinet and rack, steady rest, see photos for details
1999
used machinery auction RESALE 550 €  
  DE   request
125374666 707

Komplette Kücheneinrichtung


â?¢ 1 St crockery Cabinet, length: approx. 1.20 m, height: approx. 0.50 m, depth: approx. 0.70 m â?¢ 3 PCs cupboards â?¢ 3 PCs drawers cabinets, with a total of 8 drawers â?¢ ...

 
â?¢ 1 St crockery Cabinet, length: approx. 1.20 m, height: approx. 0.50 m, depth: approx. 0.70 m
â?¢ 3 PCs cupboards
â?¢ 3 PCs drawers cabinets, with a total of 8 drawers
â?¢ 2 PCs refrigerators
â?¢ 1 PC sink
â?¢ 1 double sink
â?¢ 2 St cupboard with sliding doors
â?¢ 1 St Base cabinet (sink)
â?¢ 2 PCs drawers cabinets, with a total of 5 drawers
â?¢ 1 St cloakroom basin with Unterspüle
â?¢ 1 St. flushing storage / servers Panel
â?¢ 1 St four plate stove, manufacturer: MKN D38300, type: 2123402-00
â?¢ 3 St. dishes stand racks
â?¢ 1 St hood, length: approx. 2.20 m, width: 1.80 m
â?¢ 1 St hood, length: approx. 1.30 m, width: approx. 1.30 m
â?¢ 1 PC washer, manufacturer: Hobart, length: approx. 3.50 m, width: 2.50 m
â?¢ 1 PC cooling machine
 
9,500 €  
    request
125460381 1900

Lot of Brackets


Weight approx.: 60 kgDimensions (l x w x h) approx.: 1200 x 500 x 50 mmDescription: 4 pcs., different lengths, 530 mm, 610 mm, 690 mm, 1160 mm, see photos for details

 
Weight approx.: 60 kg
Dimensions (l x w x h) approx.: 1200 x 500 x 50 mm
Description: 4 pcs., different lengths, 530 mm, 610 mm, 690 mm, 1160 mm, see photos for details
 
used machinery auction RESALE 45 €  
  GB   request
125374593 106

PKRR 200/2 for sale
H-Frame Crank Presses


The PKRR 200/2 frame press with a pressure of 200 tons was built in 1971 by Zamech-Elblag. Technical data for PKRR 200/2 press: - nominal pressure: 200 tons - clearance between racks: 2000 mm - slider stroke: 200 m ...
used machine
 
The PKRR 200/2 frame press with a pressure of 200 tons was built in 1971 by Zamech-Elblag.

Technical data for PKRR 200/2 press:
- nominal pressure: 200 tons
- clearance between racks: 2000 mm
- slider stroke: 200 mm
- number of jumps: 23, 27, 32 l/min.
- the distance between the slider and the table is closed (distance is the distance between the slider and the table in the lower retractable position and screwed connector): 630 mm
- zipper slider: 150 mm - table length: 1000 mm
- length of the slider: 900 mm - hole in the table: 1600 x 600 mm
- thickness of the mounting plate: 150 mm
- width of windows in racks: 400 mm
- air pressure in the clutch: 3 atn.
- air pressure in the strain reliefs: 5 atn.
- air demand for single jumps: 0.035 Nm3/sk.
- maximum number of clutch actuations on intermittent traffic: 12 l/min.
- main engine power: 22 kW - main engine speed: 1500 l/min.
- motor power to adjust the slider: 3 kW
- engine speed for adjusting the slider: 1500 l/min.
- pulling device, thrust force: 10 t
- draft device, intrinsic force: 40 t
- pulling device, stroke: 125 mm
- maximum air pressure in a draft device: 6 atn.
- weight of the string tool: 2020 kG
- weight of the press without a cushion: 30580 kG
- dimensions of the machine (width x length x height): 3100 x 2150 x 5600 mm
1971
23,750 €  
  PL   request
125460437 1403

DoubleSided Cantilever Rack


Weight approx.: 120 kgDimensions (l x w x h) approx.: 2000 x 1420 x 1500 mmDescription: 4 arms each for lighter materials, length 2000 mm, for further details see photos

 
Weight approx.: 120 kg
Dimensions (l x w x h) approx.: 2000 x 1420 x 1500 mm
Description: 4 arms each for lighter materials, length 2000 mm, for further details see photos
 
used machinery auction RESALE 65 €  
  DE   request
125374526 1401

META (THYSSEN) MULTIPAL S 540 Pp H:600 cm for sale
Shelves for pallets


Used pallet racking Jungheinrich MP / T Data: -H: 600 cm -T: approx. 110 cm -L: approx. 168 YDS -1000 kg per pallet space -Stand blue -Traverses 270 cm -Trusses in yellow Shelf consists of: -Stand 61 x 6 ...

 
Used pallet racking Jungheinrich
MP / T

Data:
-H: 600 cm
-T: approx. 110 cm
-L: approx. 168 YDS

-1000 kg per pallet space
-Stand blue
-Traverses 270 cm
-Trusses in yellow

Shelf consists of:
-Stand 61 x 600 cm
-Traverse 240 x 270 cm
-produces 540 pallet places.

SHELF STAND AT DIFFERENT HEIGHTS IN STOCK!

Accessories such as z.b ground anchors, starting-up protection u.s.w can be purchased also from us.

Our recommendation:
Tell us your requirements...
We assist you with the realisation of your projects, from planning to the order to Assembly.

Delivery upon request by us conveniently possible.
 
Price  
    request
125460443 1900

Electric Devices


Weight approx.: 400 kgDimensions (l x w x h) approx.: 1200 x 800 x 1500 mmDescription: Only contents of the rack, consisting of screw hole cutters, fuse switches, control cabinet screw connections, transformers, electric ...

 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 1200 x 800 x 1500 mm
Description: Only contents of the rack, consisting of screw hole cutters, fuse switches, control cabinet screw connections, transformers, electrical connection cables, push-buttons, electromotors, for further details see photos
 
used machinery auction RESALE 105 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

H-Frame Crank Presses PKrR 200/2


Crank press PKrR framework 200/2 pressure 200 tons was built in 1971 by Zamech-. Technical data of the press PKrR 200/2: -nominal pressure: 200 ton-clearance between uprights: 2000 mm-pitch slider: 200 mm-number of jumps: 23, 27, 32 l/min. -distance from the table slider closed (closed is the distance slider from the table in the lower turning position and first engages a): 630 mm-nastwano?? slider: 150 mm-length: 1000 mm-length slider: 900 mm-hole in the table: 1600 x 600 mm-gr ubo??: interface plate 150 mm-width Windows in the rack: 400 mm-the air pressure in the clutch: 3 atn. -odci??aczach air pressure: 5 bar -intake air when jumping individual: 0.035 Nm3/sk. -maximum number of inclusions in the clutch to intermittent traffic: 12 l/min. -main motor power: 22 kW-RPM main motor: 1500 l/min. -engine power to set the slider: 3 kW-engine speed to set the slider: 1500 l/min. -string device, wypych.: 10 t-string device, the power of przytrz: 40 t-string, stroke: 125 mm -maximum air pressure in the device pass design: 6 atn. -the weight of the tool ci?gowego: 2020 kG -the weight of the press without pads: 30580 kG -overall dimensions of the machine (w x l x h): 3100 x 2150 x 5600 mm

Welding Machines ECKERT CNC JANTAR 2


Plasma cutter CNC ECKERT JANTAR 2 was produced in 2010 year. The parameters characteristic of the cutter ECKERT JANTAR 2: -CNC: CNC ECS 872 -Source: Hypertherm HPR130A XD -the number of operating hours: ok. rbh 3590 and 326701m -table surface: 2000 x 3000 mm -range of track (length x width): 4200 x 3000 mm (2 x 3 rectangle designates the torch – this is exactly the movement) -the thickness of the cutting quality: 20 mm for the current 130 and -the thickness of the cutting quality: 12 mm for the current 80 and

Pimespo Idea 10 TX 5253


Racks & Forklifts for Warehouse For sale exclusively at 10:30 the next 11 at our offices in Bergamo The merchandise is kept Cusago (Mi) To view the lot please contact us on 0307751645 and make an appointment Detailed catalogue available Racks & equipment -metal baskets stacking storage, about 160 -various types -power tools (drills, screwdrivers, jigsaw, manual strapping tool) -storage boxes (various sizes), nr. 16 -various material for packaging etc. Forklifts and pallet trucks -forklifts Pimespo mod. 5253, 1,000 kg Capacity 10 TX idea, year: 1999 -forklifts OM mod. E-25 N, payload: 2,500 kg -walk-behind Sweeper Maspel -hand pallet truck, nr. 7 -Manual lifters, nr. 3 Various Furniture and office equipment (# 7 workstations desk complete with seat), as well as accessory equipment of various kinds (# 2 sat navs, digital cameras # 2)

CNC Plasma Cutter MESSER GRIESHEIM CORTINA DS 3100


Track width: 3100mm, working wdith: 2000mm, dead length: 1500mm, total width: 3525mm, control side: left, power supply: right, gas: propane, with plasma cutter MESSER GRIESHEIM HYPERTHERM HT4400, ventilation system DONALDSON and accessories.

Hob Grinding Machines ZFWZ 3150


The maximum diameter of the workpiece without steady ø3150 mm Maximum diameter of the workpiece steady Ø1600 mm The minimum diameter workpiece ø175 mm The largest width of the tooth milling cutters Ø350 mm at engagement angles of 1000 mm Max module incised teeth 30 mm The greatest distance from the center of the table fixing inside the milling spindle 1800 mm The largest width (B) cutting teeth Mills - spindle milling Max milling diameter ø 350 mm Max cutter length 400 mm The wheelbase between the milling spindle and the spindle mounting 300-1800 mm - Without steady max 1800 mm - Without steady min 300 mm - The steady min 300 mm The ability to manipulate the spindle milling (manual or automatic) 500 mm Cone for pin milling metric 80 Sleigh milling tilting up to 1950 The diameters of burrs ø50; ø60; ø80 table bracket diameter ø2400mm Ext hole in the table ø500mm Hole depth of 1000 mm The biggest load of 30 tons Number of T-slot in the table 12

Vertikal Turning Machines (Lathes) Stanko Ø8000 x 3240 x 125 T


Technical characteristics. The largest diameter of the workpiece - 8000 mm The greatest height. workpiece - 3240 mm The diameter of the disc table - 7100 mm The biggest shift sliders rests vertical (right and left) - 2000 mm The highest levels of vertical travel of the slides (right and left) - 4400 mm Mileage axis slider slides off the center of the shield handle - 150 mm Vertical rotation angle bracket right - -15 ° - 30 ° Vertical rotation angle bracket left (combined) - -15 ° - 30 ° Sliding horizontal slider bracket side - 1250 mm Vertical travel of the slider carriage side - 2,800 mm Maximum weight of the workpiece at a speed table to 15.5 rev / min - 125 tons Maximum weight of the workpiece at any speed - 63 tons The speed range of the table - 0.23 - 19,3obr / min * The largest total cutting force - 160 kN The biggest moment of cutting - 400 Nm Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min The feed rate accelerated sliders and carriages - 2400 mm / min The speed of the beam - 300 mm / min Main engine power - 25 kW Lifting capacity of the crane - 75 ton Suport combined (slide left) Boring spindle diameter - 125 mm Spindle stroke - 1000 mm Maximum torque of the spindle - 3500 Nm Spindle speed n - 20 - 650 r / min Number of degrees of speed spindle - 16 Max-min vertical feed spindle - 0.0352 - 215mm / min The rate accelerated feed spindle - of 2400 mm / min Shift the slider to slide in the y-axis - 2000 mm Feed range slider and bracket Min - 0.0352 mm / min Max - 285 mm / min The feed rate accelerated slider and slide - 2400 mm / min The greatest strength of the cutting blade when running from the front bracket L <= 1000 mm - 80 kN L <= 1700 mm - 50 kN L <= 2300 mm - 30 kN The extreme angles of rotation slide - -15 ° - + 30 ° The electric motor drive main spindle - 10 kW Max spindle feed force - 30 kN Cone Size spindle DIN 2080 - Metric 80

Two Column Gantry Crane ARSLAN


Load capacity: 40t, track width: 20420mm, hook height: 5508mm, track gauge: 2240mm, stroke speed: 0.6-4m/min, trolley speed: 5-20m/min, number of available cranes: 2.

Automatic folding machines Petratto Cordoba 3


High Speed Creasing Folding and Gluing Machine. The Cordoba incorporates a traditional folding section with a knife and matrix creasing unit. The folder has a modified roller configuration and fold plate angle, which eliminates crackings and curls when ...

Flofreeze Frigoscandia MX-123 Mark II


Product number: 1243G Type: MX-123 Mark II Serial number: 1390001 Belt: Twin IQF track plastic belt system Capacity: 12000 kg/hr on peas Cooling capacity: 1350 kW Dimensions: 14600 x 5900 x 4800 mm Including ADF Air Defrosting System and anti snow ...

Press Brakes Strojarne Piesok CTO 160


Technical specifications: Nominal pressing force: 1600 kN Standing in racks: 250 mm Maximum stroke: 200 mm Maximum table and bar distance: 440 mm Passage between stands: 2690 mm Free lift speed: 80 mm/s Idle stroke speed: 10 nm/s Reverse Stroke Sp ...

Plasma Cutter ESAB Telerex TXB 8500


Track length: 30000mm, track width: 8500mm, track height: 700mm, control: CNC NCE 620, cutter: 2x KJELLBERG Finefocus 800 with PB S77, extraction: DONALDSON Torrit, extraction output: 15000m³/h, working pressure: 3700Pa.

Pallet racking system Feralco


Rahmen: 9000 mm Traversen: 2700 mm Do you need shelves or accessories in other compositions or designs, please contact us. We offer a wide range of new and used shelves as well as accessories and support in planning. Other accessories such as: ...

Loading trolleys non freezing trolley include trays


80 Pcs TROLLEYS STAINLESS STEEL ON WHEELS DIMENSIONS OF EACH TROLLEY/RACK LXWXH 1130X615X2450MM 3 rows per rack/trolley Total 54 freezing pans per rack. Dimensions of the pan lxwxh 596 x 335x58 mm. In excellent condition

Thread Rolling Maschines ORT RP 30 U


TYPE: Hydraulic T: 30 ROLLERS NUMBER: 2 RACK LENGTH: 200 mm. Capacity: Ø 4 ÷ 100 x 10 mm. Weight: 2800 kg. Notes: Tilting spindles

Bed Milling Machines Sachman R-P 3


Used well-maintained SACHMAN R-P 3 bedfræser complete with HURON milling cutter head and Heidenhain TNC 360 Technical data: Motion X-axis: 1800 mm Motion Y-axis: 815 mm Movement Z axis: 802 mm Cutting board: 2000 x 730 mm Number of T-tracks: 7 PCs. ...

CNC spindle moulder WOODLAND MACHINERY SX1325B-3


Type SX1325B-3 Working area 1300x2500x210 mm Platform size 1480x3100 mm Resolutions ±0.05 mm System resolutions ±0.001 Repeat positioning accuracy 0.03 mm Table structure – vacuum adsorption Shaft drive mode – XY axis rack drive Z axis screw drive ...

Cylindrical Grinding Machine JUNKER BUAJ 29 NC


Center width: 800mm, workpiece spindle rotational speed: 22-750/min, workpiece weight: 120kg, grinding wheel diameter: 400mm, grinding wheel width: 63mm, circumferential speed: 45m/s, grinding spindle bore: 127mm, adjustment track grinding spindle head st ...

Crawler excavators CAT Caterpillar 325 C


CAT excavator Caterpillar 325 C to have a look: 41-700 Ruda ?l?ska, ?l?skie VERY GOOD CONDITION! NET PRICE: 179 000 PLN Production year: 2005 Mileage 15282 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale excavator track C ...

Crawler excavators CAT 323D L


Excavator CAT 323D L to have a look: 64-900 Saw, VERY GOOD CONDITION! NET PRICE: 287 000 PLN Year 2011 Course 8500 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale excavator track Caterpillar 323D L 2011 Machine fre ...

Crawler excavators DEMAG H45


DEMAG H45 50T excavator to have a look: 58-130, Lower Silesia VERY GOOD CONDITION! NET PRICE: 200 000 EUR Year of manufacture 1993 Process 5000 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale excavator track DEMAG H ...

Crawler excavators VOLVO EC 240 BNLC


VOLVO EC 240 BNLC to look: 76-150 Dar?owo, West Pomerania VERY GOOD CONDITION! NET PRICE: 169 000 PLN Year of manufacture 2007 r. Process 13 000 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale track excavator VOLVO ...

Mini excavators Takeuchi TB 016


Mini excavator Takeuchi TB 016 Yanmar diesel Year: 2012 Hours 2450 Total Mass: 1770Kg New tracks 3 buckets Working lights Anti theft Machine is in top maintained condition

Thread Rolling Machines ORT RP 90


TYPE: Hydraulic T: 90 ROLLERS NUMBER: 2 RACK LENGTH: 300 mm. Capacity: Ø 10 ÷ 160 x 16 mm. Power: 60 kW Weight: 10000 Kg. YEAR built: 1992 Notes: Spindle diameter 100 mm. -Roller diameter 190 ÷ 310 mm. -Main motor power 55 kW Accessories: Loadi ...

Thread Rolling Machines MAGNAGHI T 12


TYPE: Hydraulic T: 15 ROLLERS NUMBER: 2 RACK LENGTH: 120 mm. Capacity: Ø 3 ÷ 75 mm. Power: 4.75 Hp. Weight: 1200 Kg Notes: Step 0.5 ÷ 5 mm. -Spindle Diameter 54 mm.

Crawler tractors (bulldozers) Shantui SD 16


Crawler Dozer, Shantui SD 16 to have a look: 33-322 spicy, Lesser Poland VERY GOOD CONDITION! NET PRICE: 139 000 PLN Production year: 2007 Mileage 525 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch track Dozer for sale Shan ...

Thread Rolling Machines MICHIGAN ROTO-FLO 3725


Type: Rolling rack ROLLERS NUMBER: 2 Capacity: Ø 50 mm. Power: 19 Kw YEAR built: 2000 Notes: Performs processing of rolling and threading-1650 mm total stroke. -Can mount 330 + 330 mm 610 + racks simultaneously. Accessories: Siemens Simatic S5-100 ...

Thread Rolling Machines MICHIGAN ROTO-FLO 3225


Type: Rolling rack ROLLERS NUMBER: 2 Capacity: Ø 50 mm. YEAR built: 1997 Notes: Performs processing of rolling and threading-1260 mm total stroke. -330 mm 610 + racks can be mounted. or 330 330 330 + 3 simultaneously from racks + mm. Accessories: S ...

Measuring Machines MITUTOYO CP 701620 CNC


Type: double automatic Tracker CROSS TRAVEL: 1600 mm. LONGITUDINAL TRAVEL: 7000 mm. Vertical stroke: 2000 mm.

Crawler excavators HYUNDAI ROBEX 450 LC-7


HYUNDAI ROBEX 450 LC-7 to have a look: 38-300 Gorlice VERY GOOD CONDITION! NET PRICE: 150 000 EUR Year of manufacture 2005 Process 13 000 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale excavator track HYUNDAI ROBEX ...

Thread Rolling Machines MAGNAGHI 807


TYPE: Hydraulic T: 32 ROLLERS NUMBER: 2 RACK LENGTH: 200 mm Capacity: Ø 80 x 8 mm. Power: 15 Hp. Weight: 2800 Kg. Dimensions: 1650 x 1600 x 1500 mm. YEAR built: 1980 Notes: 69.85 mm spindles.

Crawler excavators CAT 375


Excavator CAT 375 to have a look: 44-360 NIEBOCZOWY k. RACIBÓRZ VERY GOOD CONDITION! NET PRICE: 200 000 EUR Year of manufacture: 1997 Process 20 000 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch I have for sale a track exc ...

Shock-freezing units non freezing track include trays


80 PIECES STAINLESS STEEL ON WHEELS DIMENSIONS OF EACH RACK LXWXH 1130X615X2450MM 3 rows per rack Total 53 freezing pans per rack. Dimensions of the pan lxwxh 596 x 335x58 mm. In excellent condition

Dorin K1500 CS-01 (x 3)


Refrigeration compressor rack equipedd in copresors Bitzer K1500 CS-01 (x 3),refrigerant reservior, pressure switch HP/LP, filters, heat exchanger Used refubrished Product number: K1500 CS-01 (x 3) Nominal capacity: 109,8 kW (-5°C/+45°C); 90,9 kW  ...

Bitzer 4NCS-12.2Y-40P + S4G-12.2Y-40P


Refrigeration compressor rack equipedd in copresors Bitzer 4NCS-12.2Y-40P and S4G-12.2Y-40P,refrigerant reservior, pressure switch HP/LP, filters Used refubrished Product number: 12.2Y-40P + S4G-12.2Y-40P Volume flow: 56,25 m³/h + 42,3 m³/h Price ...

Refrigerating machines Bitzer 4V-6.2Y (x 3)


Refrigeration compressor rack equipedd in copresors Bitzer 4V-6.2Y (x 3),refrigerant reservior, pressure switch HP/LP, filters Used refubrished Product number: 4V-6.2Y (x 3) Nominal capacity: 66,3 kW (-5°C/+40°);44,1 kW (-15°C/+40°C);27,6 kW (-25 ...

Marking Plate


Length: 6000mm, width: 2200mm, height: 890mm, thickness: 60mm, installation area: 13.2m², with eight height adjustable feet and one T-groove track.

Press Brake LVD PPEB 320/70 MNC 95


Working length: 7,215mm, rack passage: 6,100mm, pressing force: 3,200kN max. Capacity: 3200kN

Crawler excavators VOLVO EC360BLC


Excavator VOLVO EC360BLC to have a look: 90-001 Boat, VERY GOOD CONDITION! NET PRICE: 313 000 PLN Year of manufacture 2003 Mileage 5000 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale excavator track, wyburzeniow? V ...

Thread Rolling Machines MICHIGAN ROTO-FLO 3237


Type: Rolling rack ROLLERS NUMBER: 2 LENGTH: 915 mm RACKS. Capacity: Ø 50 mm. Power: 20 Hp Weight: 10500 Kg. Dimensions: 3000 x 3000 x 2200 mm. YEAR built: 1995 Notes: Total stroke 1066.80 mm. -Can mount 330 mm 610 + racks simultaneously. Access ...

Thread Rolling Machines IZPE RCS 120 H


TYPE: Hydraulic T: 20 ROLLERS NUMBER: 2 RACK LENGTH: 120 mm. Capacity: Ø 80 mm. Power: 10 Hp. Weight: 1700 Kg. Dimensions: 2000 x 1100 x 1400 mm. NOTE: spindle diameter 54 mm

Pallet racks Nedcon diverse


Auction name:(Bio) pharmaceutical international in Weesp (warehouse inventory) Online auction Start of auction: 02 February 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 March 2018 14:00 GMT +0200 (Western Europe (DST) The price  ...

Screwloader / Meat analyzer CFS Scewloader I 400


Product number: 1156 Type: Screwloader I 400 Serial number: 5000066648 Year of construction: 2009 Diameter screw: 400 mm Infeed: 1000 mm Power: 3 x 460V, 60Hz, 12.5kW Dimensions: 3100 x 1800 x 2300 mm Multitrack TS in-line analyzer Serial numbe ...

Crawler excavators Caterpillar 336D LN


Excavator Caterpillar 336 d LN to have a look: 62-500 Konin, wielkopolskie VERY GOOD CONDITION! NET PRICE: 650 000 EUR Production year: 2009 Mileage 8500 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale track excavat ...

Crawler excavators VOLVO EC360BNL


Excavator VOLVO EC360BNL to have a look: 32-825 Bucze VERY GOOD CONDITION! NET PRICE: 152 000 z? Production year 2003 The course of 11000 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale VOLVO track excavator EC360BN ...

Crawler excavators JCB JS130


Excavator JCB JS130 to look: 42-600 Tarnowskie Góry, ?l?skie VERY GOOD CONDITION! NET PRICE: 168 000 EUR Year 2011 The course of 5412 mth feel free to contact-phone: (0048) 570 188 117 Marcin Rejch for sale track excavator JCB 130JS able to bd ...

Boltless shelves Vogelsang


A new generation of conventional screw racks, quick setup, easy leveling. Plug racks offer ideal storage facilities for archives, workshops, warehouses and offices due to their great variety and flexibility. Frame height: 4 400 mm (stock: 234 pieces)  ...

Roller shelves Mecalux


height: 5500 mm load capacity: 1 T / pallet 118 pallets space, 3 pallets deep, with 5500 mm high frames 3 levels / field design (convertable on demand) price/pallet Live pallet racking is the ideal storage system for perishable goods, as well a ...

Shelves for pallets STOW Drive-in


Condition: newsy, 3 years old system 4200 pallets of space 1 T / Pallet load capacity With 9700 mm high frames With drive-in racking, pallets are placed so they can slide backwards on a rail, thus storing them more deeply and creating more space in  ...
Find used machinery dealers in your country