r 600 used for sale

Manufacturer: Purete, Type: PRT-R2113AM Doppellackwalze, Year: 2017, Control: Shillin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Conveyor: Band, Einbaulänge UV mm: 2000, Compressed air bar: 6, Year :2017

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:90 kg - Reach:2696 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1058 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

bore capacity in steel (diameter):55 mm arm length:1600 mm total power requirement:4 kW weight of the machine ca.:5,5 t dimensions of the machine ca.:2800 x 980 x 3000 mm

arm length:1600 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:2800 x 980 x 3000 mm

table diameter:500 mm clamping slots:6 x 14 mm weight of the machine ca.:190 kg dimensions of the machine ca.:500 x 650 x 300 mm

table diameter:250 mm groove width:12 mm weight of the machine ca.:47 kg dimensions of the machine ca.:500 x 450 x 150 mm

table diameter:200 mm groove width:12 mm weight of the machine ca.:25 kg dimensions of the machine ca.:350 x 300 x 170 mm

material width:450 mm material thickness:0,5 - 1,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm power requirement:1,0 kW weight:0,65 t dimensions (WxDxH):1,0 x 1,0 x 1,55 m

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

Manufacturer: Biesse, Type: Rückführung, Year: 2008, Work piece width min-max mm: ca 800, Min.-max. workpiece length in mm: ca. 2.000, for left machine: yes, Angular transfer: yes, Drain roller operation: yes, Work piece width min-max mm: ca 800, Min.-max. workpiece length in mm: ca. 2.000, Recharging length mm: ca 7.000 + 2.000, Year :2008

material width:310 mm no. of straightening rolls:5 straightening roll diameter:25 mm dimensions (WxDxH):0,4 x 0,6 x 1,15 m

material width:210 mm no. of straightening rolls:6 straightening roll diameter:40 mm dimensions (WxDxH):0,45 x 0,6 x 1,1 m

Manufacturer: Rollenbahn, Driven: yes, incl.control: ohne Steuerung, Length-width mm: 1110x1745, Working widht mm: 1500, Total hight mm: 880 -+ 50, Roller pitch mm: 90, roller diameter: 80, Drive power kW: 0,5, FREE TEXT: Ein Fuss muss nachgerüstet werden,

Manufacturer: Rollgang angetrieben für Lackstrasse, Working length mm: 950, Working widht mm: 1300, Total hight mm: +/- 980, Frequency converter: yes, Total hight mm: +/- 980, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-25, Working hight adjustable mm: yes, Manufacturer: Rollgang angetrieben für Lackstrasse, Working widht mm: 1300, Total hight mm: +/- 980, Roller pitch mm: 150, roller diameter: 45, Feeding speed min-max m/min: 10-25, Working widht mm: 1300,

Manufacturer: Purete, Type: PRT-R1106, Year: neu, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 620, Operating side: rechts, UV-laquer roller: yes, Auftragswalzengeschwindigkeit m/min.: 0 - 20, Verchromte Dosierwalze mm: yes, Feeding speed min/max: 0 - 20, Year :neu

Manufacturer: Giardina, Type: Rollbahn, Year: ca.2005, Driven: yes, driven: yes, Length-width mm: ca.980, Total hight mm: 890 +/-, Adjustable: yes, Roller pitch mm: ca.220, Conveyor speed m/min: 10-25, Year :ca.2005

Manufacturer: Purete, Type: PRT-R2113b, Year: Neu, Work piece width min-max mm: 1.320 , Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Operating side: rechts, Auftragswalzengeschwindigkeit m/min.: 2 - 80, Gummierte Auftragswalze mm: 1.450, Verchromte Dosierwalze mm: yes, Widht of roller coater: 1.450, Required space L x W x H mm: 1.600 x 2.575 x 1.700 mm, Year :Neu

This 6-axis ABB Schweißroboter Flex Arc was manufactured in 2019. It features a robust IRB 1660ID-6/1.55 robot type and a positioner with a payload capacity of 250 kg. The machine operates at a power consumption of 22 kVA and includes advanced safety features such as a vertical light curtain and integrated safety PLC. If you are looking to get high-quality welding capabilities, consider the ABB Schweißroboter Flex Arc robot arm we have for sale. Contact us for further details.

Manufacturer: Cefla, Type: Rollgang, Year: ca.2003, Working length mm: 1350, Working widht mm: 920, Ex-schutz: yes, UV-Band: ca220, Total hight mm: 80, Belt width: Schiene, Frequency converter: 3-5, Own controller: yes, Total power kW: ca.3000, Working length mm: 1350, verriegelungskontakt vor Maschine: 1600, Year :ca.2003

Manufacturer: Cefla, Type: Rollgang angetrieben, Working widht mm: 135, Total hight mm: 920, Adjustable: yes, Roller pitch mm: ca.220, Stop straightedge: yes, Feeding speed min-max m/min: 3-5, Drive adjustable: yes, Working widht mm: 135, Drive power kW: ca.0,5,

Manufacturer: Rollengang, Working widht mm: 1200, Total hight mm: 800, Adjustable: yes, Roller pitch mm: ca 40, roller diameter: 30, Schräggestellte Rollen: no, Working widht mm: 1200,

Manufacturer: Rollenbahn, Driven: no, Distribution carriage: 2, Length-width mm: 2000/3000, Width total mm: 500, Total hight mm: 250, Adjustable: no, Roller pitch mm: ca.120,

Manufacturer: Bürkle Bürste Aufsatzeineheit, Type: Reinigungsbürste, Year: ca.2005, Dust removal brush: yes, Diameter of brushes: 150, Number of units: 1, kW Leistung Motoren: ca 0,75, Number of rotations controlled: 250-750, Units mounted upright: yes, Fast exchange device: yes, Working width mm: 1350, Through running hight mm: 120, Year :ca.2005

Manufacturer: Venyeskob, Type: Rollgang, Driven: no, Length-width mm: ca.1000 X 1400 X 920 verstellbar, Length mm: ca 1000, Working widht mm: 1400, Adjustable: yes, Roller pitch mm: ca .140, roller diameter: 60, 1 Stückzahl : 1, FREE TEXT: Fahrbar auf Rolle/Maschine wird gereinigt und Lackiert,

Manufacturer: Venyeskob, Type: Rollbahn nicht angetrieben, Length-width mm: 980 X 1400 X 920, FREE TEXT: Maschine wird gereinigt und Lackiert,

Manufacturer: Rollengang, Working widht mm: 1400, Total hight mm: ca 950, Adjustable: yes, Length mm: 1750, Working widht mm: 1400,

Manufacturer: Rollenbahn, Year: ca.1990, Driven: no, Length-width mm: 2500/und Teillängen, Working widht mm: 500, Width total mm: 550, Total hight mm: ca.290, Adjustable: no, FREE TEXT: vorhanden ca 300-400 Meter/Preise ist für einen Laufmeter, Year :ca.1990

Manufacturer: Reinraumkabine, Control: yes, Supply air filter covers: yes, Heizmedium : Warmwasser, Electronic control board: yes, Working height: 3200, Wet splashback: yes, Length max mm: 3000, Inner hight mm: 2890, Sliding doors: 1, Number of spray booths: 1, Number of evaporation booths: 1, Zuluftfilterdecke m²: 25, Floor extraction: no, Supply air system: yes, Grösse L X B X H mm: 18000 X 7000, Radial fan: 2, Ceilings for incoming air: 1, Heating register: 1, Supply air system: yes, Sliding doors: 1,

Manufacturer: Rollenbahnen, Driven: no, Working widht mm: 500, Total hight mm: 235 +/- 20, Adjustable: yes, Roller pitch mm: 200, Overall length metre: 600, FREE TEXT: Preis / lfd m,

Manufacturer: Wamhoff, Type: Luftkissentisch Rückführung, Year: ca.1998, Control: hand, Conveyor belts Qty: 4000, Belt width 1 mm: 880, Conveyor belt 2 mm: 2790, Belt width 2 mm: 860, Conveyor belt 3 mm: 4000, Belt width 3 mm: 600, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: 880-950, Luftkissentisch pneumatisch: yes, Angular transfer: yes, Drain roller operation: yes, Year :ca.1998

Manufacturer: Purete, Type: PRT-R2113AM Doppellackwalze, Year: 2017, Control: Shillin, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 6-80, Durchlassbreite min-max mm: 1300, Operating side: rechts, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5-20, kW - Leistung Transport: 0,5, Conveyor: Band, Einbaulänge UV mm: 2000, Compressed air bar: 6, FREE TEXT: Bilder sind keine Orginal-Fotos Maschine ist nicht benutzt worden, Year :2017

Manufacturer: Raimann, Type: B4, Year: 1977, Max. saw blade width in mm: 100, roller diameter mm: 1100, Through running hight mm: 350, Working width mm: 400, Feeding speed max m/min: 0 - 40, Feeding speed continous adjustable: yes, Feeding rollers: yes, FREE TEXT: verfügbar ab 12/2015, Year :1977

Manufacturer: Eurotecno, Type: Reinigungsbürste, Dust removal brush: yes, Working width mm: 1300, Roll transport: yes, Feeding speed continous adjustable: yes,

Manufacturer: Roller conveyor, Total metres approx.: 1,5, Driven: yes , Working widht mm: ca 750, Drive power kW: 0,25, Dimensions LxBxH: 1500 x 850 x 950, Wight approx. kg: 70,

Manufacturer: Stäubli Model: RX160 Year of Manufacture: 2018 Type of Machine: Operating Hours: 500 h Mass: 248 kg / 546 lb Nominal Payload: 20 kg / 44 lb Robot Arm Specifications: - Model: RX160 (Series 160) - Configuration: 6-axis - Mounting: Floor-mounted - Arm Length: Standard - Color: Standard RAL 1028 (Melon Yellow), textured paint, satin finish - Integrated: Two solenoid valves for compressed air - Lubrication: H1 Food Grade Oil - Mechanical limit on Axis 1 - Brake selector switch with 5 m cable to separate box Controller: - Model: CS8C - VAL3 Controller - Operating System: SRC Version 7.x - Version: Built-in (IP20) - Power Supply: MULTI 3x400V, 50/60 Hz - Cooling: Standard cooling with airflow from bottom to top Cabling & Connections: - 15 m robot connection cable, double pluggable (arm + controller) - Angled outlet plug on the arm (right side) - Side connection at th ...

Year of Make: 1976 Last overhaul of mechanics: 1988 Last electrical overhaul: 2011

KAWASAKI RA006L robotic welding station is used for precision welding of workpieces using the MIG/MAG method. The station, equipped with two independent welding tables, is protected from the inside with SICK safety curtains and from the outside with double doors with safety locks. Next to each door is a control panel, with a safety switch and other necessary buttons. The welding station is complete and consists of the following parts: – robot arm: KAWASAKI RA06L – controller: KAWASAKI E controller E40 – MIG/MAG welder: KEMPPI KempArc SYN 300 – wire feeder: KEMPPI KempArc DT400 – manual welding table 2×1 m (2 pcs.) – safety curtains: SICK – cooling device: KEMPPI KempCool 10 – cleaning station: ABICOR BINZEL BRS-CC – KEMPPI and ABRICOR BINZEL welding accessories – anti-blinding shields – inductive sensors: SICK – door bolts and stops: SICK – cont ...

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

Inv. Num. : 8310 Type: S8 Robo Mig XT Producer: Lorch Generated: Parameters: Maximum arm reach: 1951 mm Number of axles: 6 pieces Maximum load capacity: 5/10 kg Robot travel: 4700 mm Application A: 2251 mm Areas of application B: 1951 mm Areas of application C: 49 mm Areas of application D: 1257 mm Areas of application E: 986 mm Equipment: Technical documentation Parts of the workplace: Comau Arc Robot 4.5.1945 Lorch S8 Robo Mig XT Welding Machine Anti-collision device Burner cleaning station 2 orbital positioning stages Horizontal Positioning Table Gudel Travel System Switchboard SAFETY safety system

Robot ABB Robotics IRB 2400/16 IRC5 M2004 , YOC 2007 mechanics only Number of axes: 6 Max. load capacity: 16 kg max. working range: 1550 mm Year of Make: 2007 Scope of delivery: robot mechanics 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works.

filling capacity: 750 kg max. workpiece height: 900 x 300 mm workpiece weight: total 550 kg max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1775 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. The EVO model is available for light to medium workpieces. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds t ...

Lippelt Mini Rustica Guillotine Punch for easy and, above all, quick processing of: square rolls, grain rolls, rye rolls, etc. - With 2 cutting rollers - with seed sprinkling - with punch - 1.1 kW - Year of construction GUE 2015

MIWE rack oven Roll-in Medio Baking tray size 60 x60 electrically heated Heating capacity 41.7kw Control DUS

Height-adjustable powered roller conveyor, suitable for pallets and other large packages. The conveyor belt can be adjusted in height and is driven by two motors to distribute the load evenly. See the last image for all dimensions of the conveyor. - complete solidworks and STEP- files available - The powered roller conveyor is divided into two sections, and the division of these sections can be adjusted as needed. - The machine has been used in combination with a bag in box filler. The roller conveyor has been lightly used but is in good and working condition. Please contact for more infromation.