r 600 used for sale

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Height=0.765 m, Overall length= 0.6 m, Overall width= 0.6 m, Net weight= 58 kg,

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

Case rounding machine Unknown Model 600 Year 2000´s Working size 600 mm Available Direct

1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.

Technical data for the footplate: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Footplates, new Type designation: FT111 suitable for frame profile width 100 mm Material colour: RAL 5010 Gentian Blue Overall width: 175 mm Total depth: 105 mm Material thickness: approx. 6.00 mm Weight: approx. 1.06 kg | Pcs. Incl. the following mounting material: 02x Hexagon Bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Brand new, never used. Belt size (mm): 600 x 1300

A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible.

General SKU224X117 LocationBarneveld Main Features MaterialStainless steel Motor3 KW Surface1.7 m2 Specified Features - Roll dryer Roll coolercheck Rolls chromium platedcheck Roll surface1,7m² Roll sizesDia. 600x600 mm Cooling mediumcheck (Glycol) Feeding with rollscheck With knife dischargecheck Motor3,0 kW, (380 V, 2700 rpm) With variable speed drivecheck frequency converter Roll speed22 rpm MaterialHard chrome Information MakeEscher Wyss Year of construction2010 Mounted on framecheck With switchgearcheck Floorspace2,80x0,90 m Total height1,50 m Weight2150 kg Extra SpecificationsWith control cabinet, dimensions 0,80x0,30x1,80 m, - with scraper knife, length 600 mm, : - jacketed aplication roll, dimensions 600 mm, 0,75 kW, 240/380-415 volt, 2700 rpm, roll speed 17 rpm, : - product application tray with jacket -pneumatic knife control and wall control, -ins ...

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: powered -Roll width: 600 mm -Rollers: O 80 mm -Roll distance: 150 mm -Total height of roller conveyor: 300 mm -Total length: 80 m -without motor -Price per meter: 45 EUR net / m

Standard equipment; Ready

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

KTA 19 M3 600 HP / 1800 RPM sn 37169226

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Rühle Tumbler MKR 600, Rühle high-tech polishing machine with vacuum, mixing arm, container size 600 liters, touch PC control, mixing and kneading, stepless arm drive allows up to 25 revolutions per minute, direct cooling by powerful cooling unit, Bayonet arm closure, integrated loading for 200 litres of standard trolley. The machine is available at short notice and can be tested in Koblenz, Rhineland-Palatinate.

For sale is a cable granulating system. The machine will be available from August. technical data: Voltage: 380V Frequency: 50 Hz Total capacity: 36 kW Weight: 3000kg Dimensions: 3, 5m x 2, 0 m x 2. 8 m Cable diameter: 0.3-20 mm Power: 300 350 kg / h the performance depends on type of cable Operation guarantee: 1 month The cable granulating system is suitable to various kinds of copper cables. The diameter of the cable can have up to 20 mm. Kabelschredder is very easy to operate and is very economical. You can recover up to 99.8% of the copper from the cable. Demonstration machine costs â?¬29,000 gestezliche Net VAT The offered machine is tested prior to sale min a month. New costs â?¬35,000 net On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must  ...

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight approx 9 T

Demo Machine Specifications:  Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  External dimensions of the mill drum - Ø870 x 1120 mm,  Distance between bearings - 1260 mm,  Height of the drum axis - 860 mm,  Operating capacity - 600 dm3,  Weight of the machine - 641 kg,  Installed power - 5.5 kW,  Input voltage/frequency - 400V/50Hz,  Connector - 32A; 400 V  Milling time range - 1s... 99h59min,  Mill installed on a steel frame,  Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification:  Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  Mill drum external dimensions - Ø870 x 1120 mm, � ...

Used Ruehle tumbler. Model MKR 600. Last service in 2021. RUEHLE MKR600 The RUEHLE drum tumbler-mixer combines many technical functionalities in the field of plasticizing technology. It is used, among others, in: - massaging - mixing - pickling - dry salting The RUEHLE tumbler model MRK600 is equipped with a highly efficient cooling unit and a very high-performance vacuum pump. In the computer software, we can determine the degree of product cooling. The band available to the user ranges from -15 ° C to + 15 ° C. The mass input determines the vacuum level, which can be changed at any time. The possibilities of plastic processing are just one of the advantages of the machine. It has also been equipped with a mixing function - thanks to which the raw material processing time is shortened to 10 minutes. Despite the typical massaging or mixing functions, the device  ...

KTA 19 M3 600 HP / 1800 RPM SN 37169224

Reference number Brand Model Power 20152 CUMMINS KTA19-M3 600 HP 1800 RPM PEAK TORQUE 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC INFORMATION Flywheel housing Flywheel Governor Exhaust system Turbo Cooling system Starter Remarks Sae-0, Sae-1 18 inch, 14 inch MECHANICAL WET TURBOCHARGED AND AFTERCOOLED WATER COOLED YES- 24 VOLT BRAND NEW SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm

Key data: 600

New planboard Roehm 600 mm Direct recording Camlock - 8

3-channel foil nozzle EDS FSK-600 with flex lip (tire tubes) Output capacity: 40 -50 kg/h Lip adjustment with screws and storage beams in the main layer Film width: max. 600 mm Film thickness: 0.1 – 3.0 mm 3 computer-calculated hanger channels for optimal melt distribution Distribution: A 10-15%, B 70-80%, C 10-15% Drilled nozzle lip for liquid temperature control 9 heating zones with high-performance cartridge heaters Connected load for nozzle: 18 kW (0.5 kW x 36) Fully wired for 240 V / single-phase Nozzle dimensions (L x W x H): 450 x 650 x 400 mm, weight: 760 kg Coex adapter block for one middle and two outer layers Dimensions adapter (L x W x H): 320 x 210 x 400 mm Remark: Tool steel 1.2311 All flow surfaces are chrome-plated (25-30 μm)

Screw diameter 650-600 mm

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001

Box washer, Fabr. Drill, type: R 20, in VA, with hinge belt transport chain, pump, 2 VA screens, control cabinet, YOC 1989 Box washer, Fabr. Klann, type: 600, with large pump, with screening box with 3 VA screens, YOC 1988, dismantled Box washer, Fabr. Kettner/Sotec, Type: WAH 18, 1,800 Ka/h, with control cabinet, YOC 1990 Prices on request

Extruder Rieter SP 650/600

grinding diameter: 250 mm grinding length: 600 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the s ...

Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...

Rotativa 600 Accessories: 4 different forming rollers Easy to use: - Pour sugar dough into funnel - The discharge belt is automatically moistened - Adjust the rolling of the discard belt so that biscuits come off - Automatic settling on baking trays Dimensions: Machine width: 1400 mm Length of the machine: 3000 mm Machine height: 1700 mm Leaf tray: Max. 580 x 780 mm Connection: 380 Volt, 3 Kw Condition: very good, was only 2 years in operation (lack of production) All service work carried out, incl. new settling belt

Force measuring device, force measuring device, calibration, force measuring technology, load cell, tensile force bearing -Manufacturer: ASA-RT -Product: Force measuring bearing type ATB-RP030/600 -Dimensions: 80/65/H20 mm -Weight: 0.6 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

RUHLE / RÜHLE MKR 600 Vacuum Cooling Tumbler Year 2008 Touch-PC control Automated lid Tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Feed system Quick arm fastening Scraper, pressure assembling Variable speed from 0-25 RPM Vacuum system from 0-90% 600 liters tumbler

Inv. Num. : 7256 Type: RFM 600/2 Producer: Röders TEC Created: 2000 Parameters: Work table length: 700 mm Work table width: 550 mm X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm

Key data: 300 mm

SPECIFICATIONS: Saw blade diameter mm: 300 Bore mm: 30 Max. material thickness at 45?: 60 mm Installed power: 3.0 KW Revolutions: 3000 rpm Max. cutting width mm: 600 Complete with 2 roller tables of 3500 mm and 1500 mm with electronic positioning stop 2 Pneumatic stops

Control: Heidenhain iTNC 530 Travel: X-axis: 600 mm Y-axis: 620 mm Z-axis: 520 mm Clamping surface - rotary and swivel table: Ø600 x 480mm Swivel: +10° / -90° Mount: SK 40 Tool magazine: 30 compartment t Motor spindle white: 50 - 12,000 rpm Accessories -Conveyor - Screen filter system 500 L - IKZ

Type Vacuum tumblers Height 2150 mm Width 2200 mm Length 1400 mm Capacity 600 l Power supply: 400V 50Hz 3N Total power 4.8 kW Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine

Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_oxide ...

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h

tool taper:ABS-100 VDI

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 17,040 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 06 pcs. Technical data on the volume: Pallet spaces per field: 21 pcs. Number of pallet spaces per row: 126 pcs. Total number of pallet spaces: 126 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 1,100 kg The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P217 Profile dimensions: 120 x 100 x 3.00 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 12,00 ...