quil used for sale

bore capacity in steel (diameter): 32,0 mm threading: 22 M bore stroke: 125 mm throat: 280 mm morse taper: 3 MK table:: 450 x 380 mm / 14er Nut turning speeds: 70 - 3.500 U/min feed: 0,1 / 0,2 / 0,3 mm/U column diameter: 110 mm weight: 320 kg range L-W-H: 500x800x2.100 mm total power requirement: 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing s ...

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,44 x 1,8 x 2,05 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Accessories available. - Parat holder. Workspace Swing diameter over bed 320 mm Swing diameter over carriage 150 mm Distance between centers 800 mm Working spindle Spindle holder according to DIN 55027 B6 Spindle bore 50 mm Spindle taper metric 60 Main drive Motor power at speed 1500 min-1 7 kW Spindle speed range 1st stage 0 - 1000 mm-1 Speed range of the spindle 2nd stage 20 - 4000 mm-1 Max. spindle torque 1.Stage 360 Nm 2nd stage 90 Nm Axis X Max. travel 190 mm Rapid traverse 5000 mm.min-1 Max. feed force 3000 N Axis Z Max. travel of the bed carriage 750 mm Rapid traverse 8000 mm.min-1 Max. feed force 5000 N Quick-change bracket MULTIFIX B Max. steel diameter 25 x 25 mm Tailstock Diameter of the quill 65 mm Adjustment of the quill 120 mm Inner cone of the quill – Morse 4 Dimensions of the machine Length 2180 mm Width 1341 mm Height 1 ...

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 1500 (2m, 3m, 4m, 5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 4170 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these ...

turning diameter over bed: 760 mm turning diameter over slide rest: 520 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 950 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 (18,5) kW weight of the machine ca.: 5800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. ...

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 850 mm bed width: 560 mm spindle nose: 11 spindle bore: 103 mm transmission ratio: 3 spindle turning speed - stepless: 9-55, 37-220, 220-1320 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 180 mm thread - inch: 60 - 1/6 inch. thread - module: 0,125 - 45 Whitworth-thread: 240 - 2/3 DP number of feeds: 150 mm/U longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 410 mm upper slide-adjustment: 150 mm diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 15 kW weight of the machine ca.: 5500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these  ...

Column drilling machine ALZMETALL type AB 4 SV Masch. No. 14805 Year of construction approx. 1980 Drilling capacity 40 mm Spindle mount MK 4 - short quill Projection 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole switchable Mains connection 380 volts, 50 Hz spindle speed via 2 gear stages and infinitely variable via variator gear - Counter stage for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/U - Table height adjustment via hand crank - Machine foot with machined workpiece contact surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition; used

turning diameter over bed: 860 mm turning diameter over slide rest: 620 mm turning length: 4000 (1,5m,2m,3m,5m, 6m) mm turning dia. in gap: 1050 mm bed width: 560 mm spindle nose: 11 spindle bore: 132 mm transmission ratio: 3 spindle turning speed - stepless: 12,5-100, 50-415,150-1250 U/min thread: 76 Stufen metrical thread cutting: 0,5 - 90 mm thread - inch: 60 - 1/3 inch. thread - module: 0,125 - 22,5 Whitworth-thread: 240 - 1 1/3 DP number of feeds: 150 mm/U rapid traverse longitudinal: 3800 mm/min longitudinal feeds:: 0,039 - 18 mm/U face feeds: 0,02 - 9 mm/U face slide travel: 432 mm upper slide-adjustment: 150 mm rapid traverse of cross-rail supports: 1900 mm/min diameter of quill: 105 mm : MK 6 quill stroke: 225 mm total power requirement: 18,5 kW weight of the machine ca.: 6300 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected.  ...

FUW 710 x 250nbsp; Max longitudinal travel X-axe: 420 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Max height workpiece: 430 mm Power on spindle: 1,5 kW Admission in millinghead: ISO 40 Max quill travel Z´: 200 mm Spindlespeeds: 45 > 2240 rpm Table size: 710 x 250 mm Length: 1450 mm Depth : 1465 mm Height: 1750 mm Weight: 1300 kg

Max diameter of the product processed over: bed, mm 2 500 support, mm 2,000 Smallest diameter of the workpiece, mm 500 Distance between centers, mm 12,500 Max weight of the processed product, kg 100,000 Spindle speed, rpm 0.8-50 Threading: metric (step), mm 2-96 inch (threads per 1") 20-3/8 Angle of rotation of the upper part of the caliper, 90˚ Speed of accelerated extension of the quill, mm/min 310 Accelerated movement of the tailstock, m/min. 2.9 Accelerated movement of the caliper, m/min 3.1 Longitudinal feed of the caliper, mm/rev 0.159-49.6 Ratio of longitudinal to transverse feed 2.5 Main drive electric motor power, kW 125 Machine dimensions, mm: length 20 900 width 4 350 height 3 280 Machine weight, kg 162,500

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

Key data: 660 mm, 2000 mm, 2000 1/min

Working Area Workpiece length (max.) 78 in Turning-D over bed (max.) 26 in Turning-D over support 18 in Turning length (max.) 68 in Travels Travel X-axis 13.8 in Travel Z-axis 75 in Headstock Speed range 60 – 2,000 rpm Spindle mount A2-8 Lathe chuck diameter 12 in Spindle capacity with draw tube 3 in Rapid Feed Rapid feed X-axis 236.22 in/min Rapid feed Z-axis 314.96 in/min Tool Head Number of tool stations 8 positions Accuracies Positioning accuracy X-axis ± 0.0005 in Positioning accuracy Z-axis ± 0.0006 in Repeatability X-axis ± 0,005 in Repeatability Z-axis ± 0,008 in Tailstock Tailstock taper MT 5 Tailstock quill diameter 3 in Tailstock quill stroke 6 in Drive Capacity Motor rating main drive 24.8 Hp Main drive, continuous load 20.11 Hp Torque of drive X 7 ft.lb. Torque of drive Z 11 ft ...

turning length: 1500 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52,0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1400 kg. range L-W-H: 2530 x 1000 x 1450 mm scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - cha ...

bore capacity in steel (diameter): 50 mm arm length: 350 - 1600 mm workpiece height max.: 1420 mm spindle taper MT: 5 spindle turning speed range: 56 -1450 U/min threading:: 40 mm quill stroke: 270 mm feed range - spindle: 0,06, 0,10, 0,20 mm/U slide adjustment -horizontal: mm table-size: 635 x 500 x 500 mm column diameter: 320 mm no. of turning speeds: 12 max. dis.center milling spindle to column: 1420 mm range L-W-H: 2060 x 995 x 2760 mm total power requirement: 3,5 kW weight of the machine ca.: 3300 kg Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic ...

bore capacity in steel (diameter): 32 mm arm length: 220 - 950 mm workpiece height max.: 1210 mm spindle taper MT: 4 spindle turning speed range: 88 - 1500 U/min threading:: 27 mm quill stroke: 220 mm feed range - spindle: 0,05 - 0,09 - 0,15 mm/U slide adjustment -horizontal: 730 mm table-size: 600 x445 x 380 mm column diameter: 210 mm total power requirement: 1,5 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1805 x 82´6 x 2190 m Radial drilling machine with mechanical clamping. Auxiliary dial for spindle feed depth indication. The main spindle is balanced by a special spring that makes it more durable than all other balancing mechanisms. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic tool ejector gear wheel drven 2 speed motor The data for this ad was created with  ...

Manufacturer: Gildemeister Type: Twin 65 with counter spindle & automation. Year of construction: 2010 Control: Siemens 840D powerline Circulation diameter above bed: 250 mm Flat travel carriage 1: 300 mm Longitudinal travel carriage 1: 650 mm Perpendicular Y-axis: ± 40 Flat travel slide 2: 180mm Longitudinal carriage 2: 650mm Rod passage max: ø 65 Drive power:40/100% 25/37 KW Speed range from – to: 20-5000 rpm Weight approx.: 10.000 kg Equipment: 2x star turret: 12x Driven tools: 12x VDI 40 2 turrets (all stations driven) Tool carrier: 12x VDI 40 2 turrets (all stations driven) Tailstock: Yes + counter spindle MK 4 Quill mounting: Yes Chip Conveyor: Yes Accessories: -Y-axis. -Coolant tank: 980l / 80 bar. -Coolant device for lower turret 8/20/80 bar. -Belt filter system -Mechanical oil mist separators 600m³ with contamination indi ...

bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm bore capacity in cast iron: 50 mm spindle taper MT: 4 table-size: 560 x 560 mm spindle turning speed - stepless: 0 - 1800 U/min transmission ratio: 2 : 730 x 500 mm thread dia.: 27 mm base plate: 730 x 500 mm column diameter: 150 mm spindle feeds:: 0,1 - 0,2 mm/U : M 24 total power requirement: 1,5 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 730 x 560 x 2400 mm description Industrial gear column drilling machine. The Gears are hardened and ground. The table is rotatable, equipped with T-slots and one Coolant device. The drilling depth stop can by means of the automatic depth stop. T he chuck protection is secured by a switch. Features: - stepless speed - Electromagnetic quill feed - 2-stage motor - Spindle with left / right rotation - Tool ejector - Machine lighting - automatic thread cutt ...

bore capacity in steel (diameter): 50 mm arm length: 360 x 1250 mm workpiece height max.: 1270 mm spindle taper MT: 4 spindle turning speed range: 56-1450 U/min threading:: M 27 mm quill stroke: 270 mm feed range - spindle: 0,06, 0,10, 0,20 mm/U slide adjustment -horizontal: 890 mm table-size: 635 x 520 x 420 mm column diameter: 300 mm base plate: 1785 x 785 x 190 mm no. of turning speeds: 12 max. distance between table and spindle: 1350 mm total power requirement: 3,5 kW weight of the machine ca.: 2300 kg range L-W-H: 2060 x 995 x 2645 mm Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels  ...

bore capacity in steel (diameter): 50 mm arm length: 350 - 1600 mm workpiece height max.: 1250 mm spindle taper MT: 5 spindle turning speed range: 25 - 2000 U/min threading:: 30 mm quill stroke: 315 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 1250 mm table-size: 625 x 500 mm column diameter: 350 mm total power requirement: 4 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: 2,5 x 1,07 x 2,84 m The Huvema radial drill range is unbeatable in price and performance, the machines are used for drilling, reaming and tapping. The drills frame is made from a high-quality fine-grain cast iron with heavy ribbing to ensure maximum reduction of vibrations. Precision ground gears ensure that the machine runs quietly, and the practical layout of the electrical and mechanical controls at the headstock make for easy operation. The machines are also fitted wit ...

Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

bore capacity in steel (diameter): 80 mm arm length: 500 - 2500 mm workpiece height max.: 2000 mm spindle taper MT: 6 spindle turning speed range: 16 - 1250 U/min threading:: M 65 mm quill stroke: 450 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 2000 mm table-size: 1000 x 800 x 560 mm column diameter: 550 mm base plate: 3520 x 1400 x 320 mm no. of turning speeds: 16 total power requirement: 7,4 kW weight of the machine ca.: 12500 kg dimensions of the machine ca.: 4000 x 1600 x 3850 mm Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system auto ...

turning diameter over bed: 440 mm turning diameter over slide rest: 250 mm turning length: 1000 mm spindle bore: 62 mm spindle speed:: 124 - 1400 tailstock quill taper MT: 4 quill stroke: 160 mm metrical thread cutting: 0,5 - 112 mm/U thread - inch: 1/4 - 56 inch. total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 2,6 x 1,1 x 1,50 m Qick Toolholders: Face plate: 3-jaw-chuck diameter: 3-jaw-chuck diameter: Weipert precision guide and spindle lathe WG 425 The machine comes from a training company and has been maintained more than second hand. The general condition is very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 42 mm arm length: 280 - 1100 mm workpiece height max.: 1270 mm spindle taper MT: 4 spindle turning speed range: 44 - 1500 U/min threading:: M 25 mm quill stroke: 230 mm feed range - spindle: 0,05 - 0,09 - 0,15 mm/U slide adjustment -horizontal: 820 mm table-size: 635 x 520 x 415 mm column diameter: 260 mm total power requirement: 2,2 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1880 x 864 x 2210 mm Radial drilling machine with mechanical clamping. Auxiliary dial for spindle feed depth indication. The main spindle is balanced by a special spring that makes it more durable than all other balancing mechanisms. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic tool ejector gear wheel drven 2 speed motor The data for this ad was created wi ...

Key data: 600 mm, 1250 mm, 3000 1/min

Machine Details Stock-No. 1105-03939 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information Acc. 3-Jaw Chuck 315 mm, tailstok turret 8 P ,chip conveyor, coolant CNC Siemens 840 D

bore capacity in steel (diameter): 50 mm arm length: 490 - 2000 mm workpiece height max.: 1900 mm spindle taper MT: 5 spindle turning speed range: 35 - 1890 U/min threading:: M 50 mm quill stroke: 370 mm feed range - spindle: 0,07 - 0,96 mm/U slide adjustment -horizontal: 1510 mm table-size: 1000 x 800 x 500 mm column diameter: 432 mm base plate: 2908 x 1102 x 250 mm no. of turning speeds: 12 total power requirement: 5,5 kW weight of the machine ca.: 6600 kg dimensions of the machine ca.: 3105 x 1400 x 2960 mm Radial drilling machine with hydraulic clamping device. With timer IC which makes it possible to release the arm to move up/down and to stop with one button. The spindle can remain in the same position when changing the tool. Accesories: - Gears in oil bath - Protection against suddenly falling arm - Precision ground gears - Integrated cooling system - automatic tool ejector The  ...

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm spindle bore: 38 mm tailstock quill taper MT: 3 spindle turning speed - stepless: 24 - 2800 U/min linear traverse of table: 0,026 - 1,253 mm feeds crossrail-slide horizontal: 0,013 - 0,628 mm/U quill stroke: 120 mm total power requirement: 2,4 / 3,0 kW weight of the machine ca.: 850 kg dimensions of the machine ca.: 1,85 x 0,8 x 1,7 m 3-jaw chuck: Qick Toolholders: Machine Lamp: chip protection wall: Lining protection hood: Coolant System: The machine comes from a training company and was maintained more than needed. The general condition is very good, all functions have been checked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 21537 Specifications: - Table size approx. 1100 x 260 mm - Working range of the axes - X (longitudinal) approx. 815 mm - Y ( landscape ) approx. 400 mm - Z (vertical) approx. 410 mm - Milling unit swivel + tilt + rotatable - Horiz. Displacement of the milling unit 410 mm - Table can be swivelled 45° on both sides - Max. distance between milling spindle – table surface 500 mm - Tool holder ISO - Quill stroke mm - Working spindle speeds adjustable in steps 67 - 1400 rpm - Mot Table Feeds X ; Y ; Z - Coolant device - Drive 400 V / 4.5 kW - Space requirement approx. W 1900 x H 1900 x D 1900 mm - Weight approx. 3200 kg

grinding diameter: 200 mm grinding length: 500 mm centre height: 100 mm max. dia. of grinding wheel: 300 mm max. width of grinding wheel: 60 mm transmission ratio: 3 spindle turning speed range: 2225 - 2500 - 2815 U/min head swivability: 90 ° taper angle: 10° / 30° Grad workpiece turning speeds: 8 / 30 - 750 U/min spindle cone MT: 4 inner taper MT: 3 quill stroke: 30 mm total power requirement: 4,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 1,6 x 1,4 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ● The feed for working 14,000 mm ● Max. feeding 25,870 mm ● Min. distance from Chuck 21,300 mm ● Max.. distance from Chuck 47,170 mm ● Rapid feeding speed 4,000 mm/min  ...

Key data: 720 mm, 1235 mm, 3300 1/min

Machine Details Stock-No. 1105-03948 Type of machine CNC Turning- and Milling Center Make MAZAK Type Quick Turn Smart 350 Year of manufacture 2012 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time immediately Freight basis EXW (Incoterms 2000) loaded on Price Technical details turning diameter 420 mm turning length 1280 mm control MAZATROL SMART Dialog Swing Dia. 720 mm rapid power traverse in X-and Z direction 20 m/min Chucking diameter 250 mm Bar Material Dia. 102 mm Spindle Drive 30 kW Spindle Speed: 3300 spindle nose JIS A2-8 tailstock quill taper MT MK5 Tailstock Quill Stroke 110 mm tailstock quill diameter 100 mm Tailstock Travel 1300 mm total power requirement 50 kVA weight of the machine approx. 7 t dimensions of the machine approx. 4.5x1.7 m Accessories manual tool eye Additional information Machine IN GOOD C ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...

turning diameter: 660 mm turning length: 1500 mm control: FAGOR centre height: 330 mm spindle passage: 82 mm number of spindle speeds: 30-2000 U/min bed width: 390 mm rapid speed: X/Z 4 - 8 m/min tailstock quill diameter: 75 mm Main spindle capacity: 15 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,8 x 1,8 x 2,15 m control: - FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor - Bezel - 3 jaw chucks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg

turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Waldrich Siegen CNC lathe for heavy machining Details Conversion to CNC 2006 Center distance 22,000 mm Maximum turning length Support 1: 20,000 mm Maximum turning length Support 2: 20,500 mm Largest turning diameter over support 1,600 mm Largest turning diameter above bed 2,000 mm Workpiece weight max. 70,000 kg Face plate diameter 2,000 mm Face plate speed, infinitely variable in 4 steps 1.2 - 75 rpm. Maximum torque at speed 5.65: 170,000 Nm Main motor 110 kW Largest clamping diameter on headstock ⌀ 920 mm Mounting in roller block (passable) 2 pieces 600 - 1290 mm Mounting in bezels (passable) 100 - 775 mm Control system Siemens SINUMERIK 840D Support 1 and 2 (to headstock) Displacement of the upper support 550 mm Displacement of the slider 400 mm Quick longitudinal adjustment (rapid traverse) 3,000 mm/min Q ...

Very good condition. Complete with chip scraper, driven tool, C-axis Low runtime (23520h) Technical data Swing over the bed: 500 mm Turning length: 600 mm Spindle speed: 20 - 5000 rpm Number of tools: 12 Hole: 72mm Tailstock quill diameter: 72 mm Tailstock sleeve stroke: 100 mm Total power requirement: 45KVA

turning length: 750 mm turning diameter: 400 mm centre height: 165 mm turning diameter over slide rest: 190 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 770 kg range L-W-H: 1985 x 890 x 1195 mm New price ~ 23.000 euros from a training workshop () Furnishing: - Spindle speed continuously adjustable in 2x switching stages - TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - NEWALL digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake all technical data: - Turning diameter over bed 400 mm - Distance between centers 750 mm - Center height 165 mm - Spindle bore 32 mm - Turning diameter over cross slide 190 mm - bed width 200  ...

bore capacity in steel (diameter): 35 mm throat: 350 mm quill stroke: 160 mm table surface area: 316 x 400 mm feed: 0,1 - 0,2 - -0,3 m/min turning speeds: 160-480 / 480-1750 U/min bore capacity in cast iron: 45 mm base plate: 950 x 580 mm spindle taper: MK 4 column diameter: 140 mm voltage: 388 V / 50 Hz spindle diameter: 50 mm coolant pump: 0,1 kW spindle drive: 2,2 kW total power requirement: 2,3 kW weight of the machine ca.: 0,5 t dimensions: 0,7 x 0,5 x 2,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sinker, broken, uninstalled. Corrupted control program. Travel (X,Y Axes) - 300x200 Quill stroke (Z Axis) - 150 max. workpiece dimensions (WxDxH) - 600x300x240

Key data: 935 mm, 2030 mm, 2400 1/min

achine details Stock-No. 1105-03966 Type of machine CNC Lathe Make MORI SEIKI Type SL 403 B X 2000 Year of manufacture 2003 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter max. 935 mm centre distance 2063 mm control MSG Fanuc 518 Standard Turning Dia. 730 mm Turning Speed Range - Main Spindle 2400 min/-1 power capacity - main spindle 30 / 22 kW Spindle Bearing Diameter 240 mm usable bar diameter 117 mm Chucking diameter 500 mm spindle nose ASA-A2 / 11 number of toolpositions 12 pos. Shank diameter 32 mm X-Axis 345 mm Z-Axis 2100 mm diameter of quill 150 mm Tailstock Adjustment 1,500 mm taper of center MT 5 total power requirement 144 kVA Weight of the machine approx. 15.0 t dimensions of the machine approx. 6.2 x 3.0 x 2.6 m Accessories Docu ...

bore capacity in steel (diameter): 45 mm quill stroke: 125 mm : 560 mm : 230 mm table surface area: 800 x 240 mm spindle turning speed range: 75 - 3200 U/min max. milling cutter diameter: 80 mm spindle taper: ISO 30 max. distance between table and spindle-nose: 460 mm throat: 230 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 580 Kg dimensions of the machine ca.: 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 310 mm z-travel: 330 mm taper in main spindle: SK 40 table surface area: 750 x 280 mm turning speeds: 56 - 1800 U/min quill stroke: 80,0 mm total power requirement: 2,2 kW weight: 1200 kg range L-W-H: 1700 x 1300 x 1200 mm Furnishing : - robust / conventional universal milling machine - Right / left running of the work spindle - Service, front right - rotatable universal milling head - manual milling spindle feed, with locking - Stable T-slot clamping/angle table - foldable milling spindle protection - Coolant device in the machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 700 mm turning length: 4000 mm control: Pico Auto Memory centre height: 350 mm turning diameter over slide: 480 mm spindle passage: 80 mm tailstock quill taper MT: MK5 turning speeds: 1500 U/min total power requirement: 12,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5,6x1,6x2,25 m Tailstock MK 5 Quick change steel holder Cycle control Pico Auto Memory steady Röhm 315 wedge bar chuck coolant device various steel holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column drilling machine IXION type BS 30 Masch. No. 00120669 Year of construction approx. 1995 Drilling capacity 30 mm Adapter MK 3 - short quill Projection 260 mm Quoil stroke 120 mm Table size 500 x 350 mm Column diameter 110 mm Spindle speed Level 1 80 - 140 - 230 - 380 - 700 rpm Spindle speed level 2 160 - 280 - 460 - 760 - 1400 rpm. Motor power approx. 1.1 and 2.0 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 5 V-belt steps - Table height adjustment via hand crank - quick-release chuck RÖHM Supra 3 -16 mm Space requirement L x W x H 800 x 520 x 1880 mm Weight 230 kg very good condition; used