quick used for sale

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 870 mm turning diameter over slide: 420 mm turning speeds: 36 - 1600 U/min quill:: 5 MK quill travel: 150 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3990 kg. dimensions: 4500 x 1280 x 1650 mm - Versatile applications in general mechanical engineering, production, individual production - The machine bed, cast in one piece, is extremely torsion-resistant and+ low-vibration, which is an essential requirement for accurate turning is fulfilled - Modern main spindle bearing with precision angular contact ball bearings - Central, handy circuit for feeds and threads, with control and pull spindle - Serially with rapid traverse longitudinal and plan to reduce non-productive times - The gears are oversized, hardened and precision ground - The removable bridge al ...

Motor power: 1.1kW/400V; Cutting area: 100mm x 145mm; Coolant Device: Yes; Feed: infinitely variable; Saw blade speed: 45 /90 m/min; Band saw dimensions: 2480 x 27 x 0.9 mm; Cutting angle: 0Â to 60Â; Dimension: 1400mm x 685mm x 1235mm; Weight: 185kg; Low-noise running Stable cast iron design High cutting accuracy due to vibration-free running Lowering of the saw bar via hydraulic cylinder with throttle valve infinitely adjustable microswitch for automatic limit shutdown Coolant device Standard with high-quality bi-metal saw blade Adjustable material stop for serial work Robust machine substructure Ball-bearing saw blade guide Quick-release vice adjustable via handwheel. Clamping the workpiece with handy quick-release lever Easy-to-read angle adjustment scale Overload protection S 275N Motor Circuit Breaker Two Switchable Speeds

BRANDT KDF 660 Profiline single-sided edge banding with joint milling, pre-milling, fine milling, 2-fold corner copying, radius drawing blade, flat-drawing blade and babble units Type: KDF 660 Profiline Specifications: BRANDT KDF 660 Profiline with joints and corner rounds Preheating of the tool stucco IR preheating Edge thickness 0,4 - 15mm Banding height max. 66 mm, with program high adjustment Caps from the roll at 3mm thickness max 45mm height or 0.8 65mm Plate thickness max. 8-60 mm for corner copying max 40mm Control PC20+ link control (loss of contact), with modem for remote service/maintenance 1. Joint unit program Adjustment of the infeed line 2. Bandkapmesser 3a. Radiant heater High-strength bonding by workpiece preheating 3b. Spray anti-adhesive 3c. Quickmelt Glue Mel Mel Application Unit with Quick Change 3d. Leimangabe by means of glue rol ...

Turning diameter: 840 mm Turning length: 3175 mm Turret positions: 12 Positions ATC: 12   Number controlled axis: 4   CNC Brand: Mazatrol CNC Model: Mazatrol Matrix Nexus Ideal for the energy, heavy vehicle, and other large component industries, the Quick Turn Nexus 450-II MY and optional tailstock-mounted Long Vertical Mill, which features a 1,150mm boring bar with a special bolt-on angle head, can deliver deep-hole boring to depths of 1,039mm and perform inside diameter milling operations, such as internal keyways and internal drilling. The machine’s rigid construction also provides high-precision machining over long periods of time.The Quick Turn Nexus 450-II MY’s headstock features a 457mm chuck, mounted on a 40 kW with 2,000rpm integrated spindle motor for heavy-duty metal removal. The spindle also serves as a C-axis, capable of being indexed at 0.0001° increments to accurat ...

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment rang ...

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...

turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25-220/220-1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 185 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2420 kg. range L-W-H: 2840 x 1150 x 1610 mm Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed bezel - Passage diam. 180mm max - Revolving bezel - passage diam. 120mm max - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - First fill with Shell Tellus 46 - Clamping disc 450 mm - 2 center points - Frequency converter - Digital speed display - slip clutch - Rapid traverse longitudinal and face - Cooling device - Quick change steel holder with 4 inserts - ...

With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). In Ex-version. Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bi ...

SP 1 Zimmerei - Sparrenböcke Schneider The pneumatic trestles with the special idea of Schneider, of the side method and the tempering device. Logical - Accurate - Fast Basic: Standard system: consisting of 3 trestles, clear span 3 m, height: 600 mm, Two running feet per trestle, 10 m laterally movable, all three trestles with pneumatic cylinders completely tubed together and a hand lever valve with three positions Quick adjustment of the printing cylinders and counter holders Particularities: Tool protection pad made of screen printing plate or plastic - according to customer requirements heavy steel structure Each trestle can be moved individually on a metal rail, thus being angled and easy to align or remove by one person Quick conversion to a timber frame construction table possible: Support/suspension profiles for suspension plates from trestle to trestle ...

Mini Excavator Windstorm XN10 Rhinoceros Diesel Excavator FROM STOCK Net price plus 19% VAT Description Mini Excavator Windstorm XN10 Rhinoceros 1 Cylinder Diesel Excavator Condition: New. available with articulated arm. Surcharge 720 euros. incl. Shovel 400mm -Roof and roll bar -Tool -Hammer line -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 euros Bolt for quick coupler : 10 euros Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro Hydr. Hammer : 1780 Euro Hydr. Earth auger : 680 Euro Hydr. Shovel 600mm : 520 Euro Hydr. Shovel 800mm : 590 Euro Load hook : 170 Euro Shovel 200mm : 205 Euro Shovel 400mm : 270 Euro Shovel 600mm : 310 Euro Shovel 800mm : 340 Euro Sale takes place with invoice with shown VAT. 19% VAT included in the price. 015121271265 Model WINSTORM XN10 Fire RHINOCEROS Operating Weight 85 ...

Mini excavator Windstorm XN10 Knickarm/Knickmatic from stock new Net price plus 19% VAT Description Mini Excavator Windstorm XN10 Rhinoceros 1 Cylinder Diesel Excavator Condition: New. Articulated arm / articulated mates from stock Book available incl. Shovel 400 mm -Roof and roll bar -Tool -Hammer line -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 euros Bolt for quick coupler : 10 euros Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro Hydr. Hammer : 1780 Euro Hydr. Earth auger : 680 Euro Hydr. Shovel 600mm : 520 Euro Hydr. Shovel 800mm : 590 Euro Load hook : 170 Euro Shovel 200mm : 205 Euro Shovel 400mm : 270 Euro Shovel 600mm : 310 Euro Shovel 800mm : 340 Euro Sale takes place with invoice with shown VAT. 19% VAT included in the price. 015121271265 Model WINSTORM XN10 Fire RHINOCEROS Operating Weight 850kg ...

HIGH SPEED MULTIFORMAT POUCH MACHINE MATERIAL WIDTH :1200MM (MAX) MATERIAL DIA : 1000 MM (MAX) POUCH WIDTH : 50-650 MM POUCH LENGTH : 30-300 MM - (250 MM X 6 =1500 MM) MACHINE SPEED :180CPM /45 meters POWER : 220V, 3 PHASE, 50/60 HZ COLOR: : STAINLESS STEEL/White COMPLETE WITH: - SHAFTED UNWIND ST AND X 1 SET - UNWIND DIA. 800 MM WITH ROLL - 3" AIR SHAFT - 2.5 KW POWDER BRAKE WITH ROTARY ENCODER AND DANCER FOR TENSION CONTROL - .55KW DRIVE MOTOR NIP WITH INVERTER CONTROL FOR UNWIND UNIT FOR CONTINUOUS MOTI ON UNWINDING - LPC SENSOR FOR UNWIND MATERIAL FOR EDGE/LINE GUIDING - PHOTO SENSOR (NT-6) FOR PUNCHING AND ELECTRONIC TOUCHSCREEN CONTROL FOR POSITIONING X 1 SET - DANCER ROLLER DEVICE X 1 SETS - UNWIND STAND CAN BE MOVED LEFT/ RIGHT BY MANUAL - ADJUSTMENT FOR QUICK SETUPS Material folding device for gussets x 1 set. Material ...

Live tools on all turrets (12 positions each turret) Y axis on all turrets High pressure system with cartridge filter - max 18 bar, swarf conveyeor TECNOFORME Auto shut off Bar loader interface Type G pick-up arm for sub-spindle including conveyor belt for finished parts External cleaning blow for spindle and counter spindle Internal cleaning jet with coolant for counter spindle Polygoning Monitoring of cutting forces and tool life Navigator system for fast search of the piece zero, work clamping, N° 1 collet chuck Hainbuch SPANNTOP ASA 8 GR. 80mm - main spindle, N° 1 collet chuck Hainbuch Axfix ASA 6 GR. 80mm - couter spindle, tool holders, Set of tool holders Marchetti consists of:, N° 1 cut-off tool holder with coolant supply, N° 2 boring bar holder 40mm internal coolant supply, N° 4 boring bar holder 32mm internal coolant supply, N° 2 duple toolholder for tool shaft  ...

Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless stee ...

Fastening system, recessed light quick fastening, swivel bracket, 6 mounting kits TRILUX 370/1N TK No. 00120821 2065418 Material: nickel-plated brass one mounting kit includes 4 galvanized quick-mount swivel brackets New ! Dimensions ( packaging ): 300 x 150 x 80 mm

Control: Manufacture: Fanuc type: Quick Turn mm turning dia. over bed: 400 mm centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 230 mm turning dia. in gap: 460 mm spindle bore: 60 mm spindle taper:: DIN 55027 / Gr.6 spindle turning speed - stepless: 1-3000 U/min tailstock quill taper MT: 4 diameter of quill: 60 mm quill stroke: 120 mm total power requirement: 11 kW weight of the machine ca.: 1.6 t dimensions of the machine ca.: 275 x 140 x 155 cm x cm x cm Quick-change toolholder: Multifix B Number of toolholders: 6 3-jaw chuck: diameter: 200 mm Collet chuck: F48 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main s ...

turning diameter: 440 mm turning length: 1500 mm swing diameter over bed slide: 210 mm Swingdiameter in the bed bridge: 620 mm centre height: 210 mm reus: 21 (20 - 2000) U/min tail stock: MK5 quill stroke: 180 mm diameter of quill: 70 mm spindle taper: DIN 55027 Nr. 8 spindle bore: 62 mm feed: längs 0,04 - 12 m/min feed: quer 0,02 - 6 m/min total power requirement: 7,5 kW weight of the machine ca.: 2430 kg dimensions of the machine ca.: 2850 x 980 x 1330 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0 ...

Overview The Triblock consists of a rinser, filler and capper and was manufactured by Sasib/Sarcmi in 1993. It is an isobaric machine for the production of still and sparkling water or CSD. Techn. Details Capacity: 22.000 bph Worked formats: PET 0,45l & 0,66l Cap type: PCO 1881 plastic screw Number of rinser stations: 90 Number of filling stations: 90 Number of capping stations (AROL capper): 15 Rinsing machine with integrated recirculation system Filling with differential pressure system Filling machine equipped with star clutches with quick format change Capper equipped with quick format change Original mechanical filling valves brand Simonazzi Revamping of electrical panel with Siemens S7 E300 PLC Cap hopper not included

Reference ID: PP-35200 Category Flatbed Die Cutter Manufacturer: Heidelberg Model Promatrix 106 CS Year Built 2021 Speed 8000 sheets/h Max. Size 760×1,060 mm Min. Size 300×350 mm Condition Very Good Location Europe Availability December 2023 Machine Description Processing of cardboard up to 2,000 g/m² Stripping Station 1. Register system 2. Integrated quick release systems for everyone ools (top, middle, bottom) 3. Fine adjustment of the tools Position indicators 4. Test sheet removal 5. Electronic sheet monitoring 6. Preparation table (option) Tray (CS only) 1. Non-stop roll cloth 2. Pneumatic flap for 3. Test sheet removal 4. Sheet format setting with 5. Position indicators 6. Motorized brake brush 7. Braking force adjustment 8. Strip insertion device (option) 9. Gripper edge separation (option) Non-stop investor 1. Suction head for paper, cardboard  ...

turning length: 1500 mm turning diameter: 460 mm swing diameter over bed slide: 270 mm turning dia. in gap: 690 mm spindle bore: 80,0 mm turning speeds: 25 - 1700 U/min bed width: 300 mm spindle taper: DIN 55029 D 1-8 taper in tailstock: 4 MK quill travel: 130 mm total power requirement: 5,5 kW weight of the machine ca.: 1845 kg. range L-W-H: 2750 x 1080 x 1600 mm Description: The Solid 460 Pro universal lathe was specifically designed to be economical Manufacture of individual workpieces and small series with high precision designed. Even the basic equipment includes all the important ones Accessories, which make this machine universally applicable. Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed bezel - Passage diam. max. 150mm - Revolving bezel - P ...

KT7 CNC KRP 150 X 300 SILVER plasma cutting machine built in Poland in 2019, offers its user fast and precise machining of sheet metal weighing up to 4 tonnes. The compact design and all components of the machine have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. For cutting workpieces, the machine uses a fully automatic torch with a special Torch Sensor Control (TSC) system, which prevents damage to a torch during operation. The KT7 CNC plasma cutting machine is also equipped with an integrated control module with SheetCAM CAM software and additional functions to improve the machine’s operation. Technical data of the KT7 CNC KRP 150 X 300 SILVER plasma cutting machine - work table surface (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110-270 mm - polished slats and gears - ball convey ...

Professional and high-performance strapping machine from a renowned European manufacturer with internal frame dimensions of approx. 650 x 500 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated threading system as well as a reel quick-change system. -Strapping tension adjustable. -Soft tension possible. -Automatic belt insertion. -Strapping release on both sides via foot pedals. -Wear-free belt guides with quick-change system. machine can be moved and locked via castors. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams. The machine was checked or overhauled by a service technician. It can be demonstrated under electricity.

Professional and powerful strapping machine from a renowned German manufacturer with internal frame dimensions of approx. 500 x 400 mm wide, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated threading system as well as a reel quick-change system. -Strapping release via stable foot switch. -Strapping tension infinitely adjustable. -Soft tension possible. -Automatic belt ejection when strapping is released without packaged goods. -Wear-free belt guides with quick-change system. -Sliding via castors. The machine can be demonstrated under power.

Band width: 150mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Abrasive roller diameter: 60mm/100mm/120mm; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 310kg; Grinding unit can be swivelled up to 45Â via lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working. Oscillating sanding belt with separate geared motor for better sanding results oscillation optionally switchable Abrasive sole with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilising the entire abrasive belt width Height-adjustable additional table with suction for grinding radii The spring-loaded belt tension automatically compensates for belt le ...

Band width: 150mm; Band length: 2270mm; Veneer grinding device: no; Oscillation: yes; Roll diameter: 38mm, 50mm, 76mm; Swivel grinding unit: yes / 90Â - 0Â; Work table: 680mm x 310mm; Additional table: 260 x 260 mm; Belt speed : 16 m/sec. m/sec.; Suction port: 100mm x 2; Motor power: 1.5kW/400V; Machine length: 1350 mm; Machine width: 585 mm; Weight: 162 kg; Infinitely angle-adjustable sanding unit (0 - 90Â) for vertical and horizontal sanding Oscillating sanding belt for better sanding results and a longer service life of the sanding belt Quick and easy sanding belt change via quick-clamping system abrasive sole with graphite coating as standard for a longer service life of the sanding belt Height-adjustable robust work table made of grey cast iron with T-slot, supported by spring bearing Smooth adjustment of the table height by means of gas pressure springs Incl. late ...

Wood step drills, wood drills, countersinks, end mills, drill holders, click quick-change chucks -for: Line drilling machine, fitting drilling machine -from: a wood workshop -15 kg: milling cutter, drill bit, countersink, click quick-change chuck

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Box tube punch: 50 x 30 mm -Round tube punch -Coordinates stop -Projection: 155 mm -various tool with you -Punch quick change system -Page and depth stops -Max. Punching capacity: 36 t -2x quick change tool carrier -Weight: about 2000 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa, thread cutting quick-change chuck MK3 -Intake: Type Bilz WFLK 115 MK 3 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 B 8x6.2 M 8 -Type: Bilz WES 1 B KP 6x4.9 M 8 -Total dimensions: 140/36/H140 mm -Weight: 0.9 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa thread cutting quick-change chuck MK2 -Intake: Type Bilz WFLK 115 MK 2 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 BK 4.5x3.4 M 4 -Type: Bilz WES 1 B 3.5x2.7 M 5 -Total dimensions: 140/35/H120 mm -Weight: 0.7 kg

Pipe coupling, pressure coupling, quick coupling, fire brigade coupling, Storz coupling, hose coupling -Manufacturer: Schott, quick coupling type PVR 12/90 to Ø 150 mm -Coupling: size C-DIN 14 302 -Dimensions: Ø160 x 330 mm -Weight: 1.6 kg/pc.

Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm -Measurements: see photos -Dimensions: 400/1130/H665 mm -Weight: 192 kg

Mitre Cold Circular Saw BERG & SCHMID Type MKS 350 Year of manufacture approx. 1980 Saw range at 90 Round 110 mm Saw range at 90 Rectangle 160 x 90 mm Saw range at 90 Square 95 x 95 mm Saw range at 45 Round 95 mm Saw range at 45 Rectangle 120 x 90 mm Saw range at 45 Square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchable Mains connection 380 volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45- Material Clamping vice with quick-release eccentric lever - Coolant device with electric coolant pump - Material stop 350 mm- Sawing blade with 335 mm installed - Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition; used

cutting diameter: 255 mm saw band length: 2765 x 27 x 0,9 mm table height: 950 mm : 18-110 m/min : 255 mm capacity 90 degrees: square: 240 mm capacity 90 degrees: flat: 300 x 180 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm capacity 45 degrees: round: rechts 180 mm capacity 45 degrees: square: rechts 160 mm capacity 45 degrees: flat: rechts 180 x 100 mm : 1,5/1,8 kW : 350 kg : 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system  ...

A new CTX 1250 TC turning / milling machining center with a milling spindle, counter spindle and bar feeder is on sale. The cost of the machine is discussed and indicated taking into account delivery to the enterprise, it is possible to provide a guarantee up to 6 months, commissioning and training. Basic machine B-A7255 CTX beta 1250 TC Universal lathe The maximum workable length is 1250 mm. - Main spindle: integrated motor spindle ISM 76 - Main AC drive 25/34 kW (100/40% ED), 5000 min-¹. - Open jig (hydr.) With an inner diameter of the draw tube of 67 mm. Clamping force 68 kN at max. P 45 bar. - C-axis with spindle brake (hydr.) - Cross slide with integrated milling and turning motor spindle with hydraulic clamping for turning operations, HSK-63A taper according to DIN 69893 - Y-axis ± 100 mm - B-axis ± 110 ° pneumatic clamping - Disk tool magazine for ...

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter920 mmWeight approx.19900 KgRapid feed X / Z20/24 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z485/2150 mmNumber of tool stations12 Speed max.1600 rpmBar diameter max.116 mmSwing- Ø, max.733 mmMax. Turning Length2000 mmDrive power main spindle45/37 kWCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) Hollow Cylinder set for KITAGAWA 24in. Hollow Chuck B-24A1521D (without chuck body) (SK-OP)(Left Spindle) Hollow Cylinder Set for 24-inch) Chuck B-24A1521D (Bar work capacity dia. 117 mm (4.61 inch)) Hollow cylinder and draw bar are  ...

SM 102.5.P 1996, QUICK SALE, SM 102/5 P1 BJ 1995, Install in 1996, 88 Mio AUTOPLATE ALCOLOR, Printed only 45-55 Gramm Paper, With powderunit, Very good condition 175.000 euro VERY QUICK DECISION NEEDED PLS SERIOUS OFFER

Mark Two in great condition, like new with the following accessories:, Equipment:, 2x Onyx FFF filament - 800 cm³ spool, 3x Precise PLA FFF filament - 600 cm³ spool, 1x cleaning stick Precise PLA (desktop and X series), 1x carbon fiber CFF filament - 50 cm³ spool, 1x Kevlar CFF filament - 50 cm³ spool, 1x fiberglass CFF filament - 50 cm³ spool, 1x HSHT fiberglass CFF filament - 50 cm³ spool, 1x dry box for material storage Compact (desktop and X series), Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass) ...

centre height: 255 mm centre distance: 1080 mm turning diameter over bed: 500 mm turning diameter over slide: 290 mm turning length: 1000 mm spindle taper: KK 8 DIN 55027 control: SIEMENS bed width: 360 mm spindle bore: 70 mm turning speed range: 2 - 2800 U/min rapid travel - longitudinal/face: 10 / 5 m/min quick change toolholder: MULTIFIX Typ B / CAPTO drive capacity - spindle motor: 11,0 kW taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 160 mm coolant: voltage: 400 V total power requirement: 16,0 kVA weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,85 x 1,60 x 1,80 m chip conveyor: 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS - quick change tool holder MULTIFIX - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal laser cutting machine for sale. Inspection of the city of Krasnoyarsk. The set includes 2 replaceable portal-type hydraulic tables. Operating range Laser processing area, mm: 3000x1500; Maximum distributed load on the table, kg: 1000; Machine accuracy parameters (with feedback sensors) Positioning accuracy along the X, Y, Z axes mm/m: ±0.05; Positioning repeatability along the X, Y, Z axes, mm/m: ±0.005; Movements and feeds Working displacement along the X axis, mm: 3000; Working displacement along the Y axis, mm: 1500; Working movement along the Z axis, mm: 100; Speed of rapid movements along the X, Y axes, m/min (synchronously): 150; Speed of fast movements along the Z axis, m/min: 50; Working acceleration: up to 2g; Linear axes X-axis: linear drive; Y axis: linear actuator; Z axis: servo drive, precision rack and pinion with mechanical backlash compensation; ...

Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to +45° and -60° Silent operation Heavy-duty cast design High cutting accuracy due to vibration-free operation Ball-bearing saw blade guide Chip brush Automatic shutdown of the saw a ...

bore capacity in steel (diameter): ca. 40 mm throat: 300 mm bore stroke: 160 mm drive capacity - spindle motor: 1,5 kW spindle taper MT: Schnellwechsel/Quick chan column diameter: 180 mm table surface area: 300 x 400 mm distance spindle /table: 680 mm distance spindle/base plate: 1070 mm dimensions: 0,7 x 0,45 x 1,85 m range L-W-H: 1,0 x 0,5 x 2,32 m weight of the machine ca.: 0,65 t Heavy Pillar Drilling Machine. - spindle left/right - Manual tapping (manual change direction of rotation) - autom. feed with Depth gauge - coolant system - height adjustable head - hight adjustable table - quick change tool system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MOST SPEEDCUT 15/30 plasma-gas cutting machine was built in 2018 in Poland. The machine used for professional production needs, performs precision cutting of metals with a maximum weight of 4 tonnes using a fully automated torch. The torch uses a special system to protect the torch from damage, which combined with the fully galvanised, single-module design of the machine guarantees long and trouble-free operation throughout its lifetime. The SpeedCUT 15/30 CNC cutting machine weighs 1500 kg Technical specifications of MOST SPEEDCUT 15/30 plasma-gas cutting machine - work table dimensions (L x W): 3000 x 1500 mm - travel speed: 25000 mm/min - working speed: up to 10000 mm/min - Z-axis feed range: 110 mm - maximum workpiece weight: 4000 kg - table type: waterbed table (stainless steel tub) - power supply: 230 V; 50 Hz - dimensions (L x W x H): approx. 3600 x 2050 x 1650 mm - we ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 € : 289.26 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1600 mm : 1800 mm : 488 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoT ...

Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation - Socket for  ...

: neu : 2024 : 6250 : März 2024, Zwischenverkau : Italien : 15040 € : 308.32 € : Doppelsäulenführung : 3270x27x0,9 mm : 40/80 m/min : 300 mm : 300 mm : 350x260 mm : rund 210 mm, quadrat 210 : rund 110 mm, quadrat 110 : 830 mm : 1.5 kW : 1500 mm : 1600 mm : 1900 mm : 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with Mo ...

Key data: 46 °, 3200 mm, 1000 mm

sliding table saw Altendorf F45 ELMO III Electromotive height and swivel adjustment Saw blade swivel + 46° to - 46° On-screen control with 12" touchscreen Double trolley 3200 mm Motor 5.5 kW VARIO infinitely variable speed control 2000 - 6000 rpm Saw blade diameter max. 500 mm Cutting height max. 175 mm Cutting width at rip fence 1000 mm Control panel at eye level with document holder 2-axis scoring unit with electric. Height and side adjustment Scoring blade height programmable with quick lowering & Quick lift, motor 0.75 kW, 8200 rpm. LED illumination when the scoring machine is switched on Table extension 840 mm Angle stop with manual adjustment, lengths up to 3500 mm Angle adjustment 0-49° Duplex stop 1350 mm

Specifications: Workpiece length: min 200 mm Workpiece length: max 3050 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 12 mm (for horizontal machining on the two transverse edges and on the upper edge), Note: When drilling horizontally from the lower edge, central drilling is only permitted up to a workpiece thickness of 19 mm. max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 50 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces. Drill gear V13 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2,800 rpm Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-chan ...

VARGA FLEXO 800 Type HK68,, C.I. flexo printing,geared, 6 colors, working width 800 mm., Printable materials:, - Pre-treated plastics (PET, PE, BOPP), - Multilayer films, - Paper, - Lenze servomotors installed in machine- main drive, unwinding, winding, - pressure cylinder: central impression, - CI pressure cylinder material: ST52–3, - number of printing stations: 6 pcs, - printing length: 30–55 cm, - print length scale: 1 cm, - printing accuracy at constant speed ± 0.2 mm, - length register setting: manual, - cross register setting: manual, - maximum print width: 800 mm, - Maximum roll width: 900 mm, - Unwinder: 1 pc, - core diameter : 76 mm, - Maximum diameter of reels: 1000 mm, - mechanical speed: 15–120 m / min, - Machine weight: 7 tons, Equipment:, - Automatic, two-way winding and rewinding system that maintains a constant tensile force after setting the material parameters.  ...

Used Shrink Wrapper Zambelli LFT 30 S F Manufacturer ZAMBELLI Italia 2008 Model LFT 30 Capacity 30 packs min Working hours only 2 100 Packer is for PET bottles only 1 5 2 0 2 5 l packs 3 2 Not for smaller bottle volumes Packaging with foil without pad The machine is still connected Preserved in good condition General Description Machine for packaging in heat retractable material continuous movement no sealers Latest generation for medium and high production levels Maximum speed depending on machine model type of product and bundle to be formed Unique design features in this type of machine no mechanical parts on the operator side thus giving great accessibility mechanical parts grouped on opposite side to operator thus making all routine and non routine maintenance jobs simpler and faster Used Shrink Wrapper Great range of choice both in formats and versions Simple and very quick format  ...