We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,993 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Druckplatten - Entwicklungsmaschine / Plate Processor AZ FE Year 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Horizontal 5-axes CNC lathe Quick tech DT 42 DUO Year 2012 Control: Mitsubishi M70 Machine number: 3264 Weight: 3,400 KG 380 V, 60 HZ 15 KVA S1, S3, X, Y, Z, X 1, Z1 Maximum turning diameter: 42 mm Maximum turning length: 100 mm Spindle bore: 44 mm Speed: 4,000 rpm. Procedures: X: 200 mm Y: 250 mm Z: 235 mm X-1: 235 mm Z-1: 235 mm Bar feeder quick tech BFG 42 with LED display the rod length / position of the rod Year 2012 Machine number: 1154 Weight: 1800 KG 220 V, 60 HZ The machine can be visited at any time under power and is in a good condition. We love to hear from you.
used
This Quick Tech T8-Hybrid-YB Turning Milling machine was manufactured in the year 2021 in Taiwan. It is equipped with a Fanuc Series Oi - TF Plus control unit.
used
This QUICK-TECH Q5 Lathe was manufactured in 2018 in Taiwan. It is equipped with a Mitsubishi M80 control. This turning machine has a table size of 620 x 420 mm with a max. table load of 250 kg. The clamp type is BT30. The machine is still under power and can be inspected at any time. There are 4 units available of the same model and YOM at the same location.
used
Sewing machine motor, luminous flux motor, electric motor -Manufacturer: Quick, sewing machine motor type DM 0.5-4 -Power: 370 W -Speed: 1420 rpm -Voltage: 220/380 V 50/60 Hz -Transformer: sewing light 25 W -Shaft: Ø 14 x 30 mm -Dimensions: 245/240 / H280 mm -Weight: 12 kg
used
Quick Pack Shrink Hood Machine Year: 2020 On behalf of the customer
used
used
Number of sanding units: 8 St. sanding width: 300 mm Sanding height max.: 100 mm Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine ---------------------------------------------------------------------- --------------------------------------- Maschine zur Längsholzbearbeitung - Lose Fasern werden von der Oberfläche entfernt - Erhebliche Reduzierung der Faserbildung nach der Grundierung - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur - Bessere Tiefenwirkung im Holz - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz - Stufenlose Einstellungen aller Geschwindigkeiten - Leichter Werkzeugwechsel durch abnehmbare Spindeln - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung - Optionale PLC-Steuerung vorgesehen Einsatzmöglichkeiten - Fensterflügel- ...
used
Turning diameter: 200 mm Turning length: 500 mm Turret positions: 12 CNC Brand: Mitsubishi CNC Model: 900 T Max. turning Ø 200 mm X-Axis 200 mm Z-Axis 500 mm Spindle bore 52 mm Speedrange 4000 Rpm Spindle power 7.5 kW ATC / revolver 12 Control Mitsubishi 900T Chip conveyor Yes Dimensions Length 3.000 mm Width 1.500 mm Height 1.800 mm Weight 2.500 kg
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Number of axis: 6 Drive system: AC Servo System Max. working envelope: Axis: 1 ? 3.14 rad (? 180 ?) Axis 2 + 1.05 ~ - 2.53 rad (+ 60 ~ - 145 ?) Axis 3: +4.22?-2.69 rad?+242?-154 Axis 4: ? 3.14 rad (? 180 ?) Axis 5: ? 2.42 rad (? 139 ?) Axis 6: ? 6.28 rad (? 360 ?) Max. pay load: 12 kg Weight: 210 kg
used
Two-axis Cartesian loader having the following characteristics: ? Total arm load 30 Kg. ? Max. speed X axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? Max. speed Y axis 150m/min.- travel 5,000 mm., repeatability 0.1 mm. ? 2 degrees of freedom governed by low-inertia brushless servomotors. ? Siemens motor with brake for X axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0. ? Siemens motor with brake for Y axis, 1FT/1FK mod. 1FK7062-2AF71-1UH0 ? Drive unit asse X-Y Siemens Double Motor Module- 5,00 A 6SL3120-2TE15-0AA4.
used
I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS
used
Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation.
used
Voltage: 220V, including spare parts.
used
SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller
used
Manufacturer: Quickwood, Type: RO 1300/1T, Year: 2000, Control: yes, Number of units: 1, Working widht mm: 1300, Through running hight max mm: ca. 100, Through running hight max mm: ca. 100, kW output motor: ca. 3, Weight approx. kg: 1500, Required space L x W x H mm: 2180x1850x2100, Year :2000
used
Manufacturer: Quickwood , Type: Pro 1400 Elite, Year: 2008, Control: Pogramm , Number of units: 8, Working widht mm: 1400, Through running hight max mm: 100, Diameter of brushes: max. 350, Through running hight max mm: 100, kW output motor: 4x1,84, Feeding speed continous adjustable: yes, Weight approx. kg: 2100, Work piece width min-max mm: 1400, Min.-max. workpiece height in mm: 100, Year :2008
used
Professional automatic packaging system from a renowned German manufacturer. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. -Automatic welding frame movement (electromotive). -Perforation possible via 2 adjustable needle rings. -Roller holder movable. -Tunnel opening approx. 450 x 240 mm. -Maximum packing theoretically approx. 500 mm x 400 mm x 240 mm. -Maximum film roll width approx. 600 mm. -Adjustable product slot. -Machine with rollers movable and lockable. -380 V / 5.5 KW. A lot of setting options on the display: -Automatic operation / manual operation. -Tunnel temperature. -Welding time. -Cooling time/holding time during welding. -Transport time of the conveyor belt. -Transport speed of the roller chain. -Cycle time for automatic operation. Dimensions set-up approximate ...
used
28 tools - high pressure pump - no barfeed (but it was interfaced to Iemca Master 880) - Mitsubishi M700 Control
used
Max. Turning Dia. 100mm Max. Bar Working Dia. 65mm Max. Turning Length 230mm Collet Chuck Type KK6-185E60B Spindle Nose A2-6 Spindle Bore 66mm Max. RPM. 6000rpm Sub-spindle Capacity Max. Turning Dia. 100mm Max. Bar Working Dia. 30mm Max. Turning Length 100mm Collet Chuck Type KK5-173E42B Spindle Nose A2-5 Spindle Bore 31mm Max. RPM. 6000rpm C Axis Least Command Unit 0.001° Positioning Accuracy 0.02° Travel&Feed X1/Y1/Z1 axis 150 / 410 / 250mm X2/Y2/Z2 axis 450 / 380 / 300mm Rapid Feed 30m/min Repeated Positioning Accuracy 0.005mm Motor Main-Spindle Servo Spindle 11.0kw Sub-Spindle Servo Spindle 3.7kw X1/Y1/Z1 axis AC Servo 1.5k X2/Y2/Z2 axis AC Servo 1.5k Motorized Tool AC Servo 1.5k A.T.C System OD/ID Tools Main Spindle 6 / 5 OD/ID Tools Sub Spindle 5 / 9 Tool Shank Size â¡ 20mm Drill Holder Size (Main) ER-20 / Ã20mm
used
SECOND-HAND BRUSHING MACHINE QUICKWOOD RO1300/1T - CE RULES - volt. 380/50 - sn 8275 - year 2002
used
Description: Brush diameter approx. 260 mm, table 1020 x 620 mm, working height approx. 870 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,400 mm, weight approx.: 120 kg
used
Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder, quick change head -Quick-change steel holder: quick-change head size. B with base plate -Division: 40-fold -Dimensions: 190/140/H150 mm -Total weight: 9.4 kg
used
quick change tool post, tool post head, quick change tool post, quick change drilling tool post, quick change post, quick change turning tool post, quick change head, turning tool post -Manufacturer: Ideal, quick-change turning tool holder -Locating hole : Ø 20 mm -Clamping height: 32 mm -Pad length: 155 mm -Dimensions: 180/160/H145 mm -Weight: 9.1 kg
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, 2 quick-change chucks / 6 sleeves -Types: FW4 RSWF 4 recording MK4 -Quick-change sleeves: 4x MK2, 1x MK3, 1x MK4 -Dimensions: 220/80/240 mm -Weight: 8.3 kg
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK4 / 40 mm -Dimensions: see photos -Quantity: 12x quick-change chucks available -Price per piece -Dimensions: Ø 72 x 215 mm -Weight: 2.1 kg/pc.
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK4 / 42 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 85 x 240 mm -Weight: 3.1 kg
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK3 / 32 mm -Dimensions: see photos -Quantity: 14x quick-change chucks available -Price per piece -Dimensions: Ø 62 x 175 mm -Weight: 1.2 kg/pc.
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece -Total dimensions: Ø 50 x 143 mm -Weight: 0.6 kg
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK3 / 28 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 58 x 190 mm -Weight: 1.1 kg
used
Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Quick-change boring bar holder: clamping diameter 44 mm -Shooting dimensions: see photos -Dimensions: 144/72/H155 mm -Weight: 2.9 kg
used
Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Manufacturer: GK, quick-change turning tool holder HB1136 -Shooting dimensions: see photos -Clamping length: 200 mm -Quantity: 1x holder available -Dimensions: 200/60/H140 mm -Weight: 3.6 kg
used
Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder -Manufacturer: GK, quick-change turning tool holder HB1136 -Shooting dimensions: see photos -Clamping length: 200 mm -Quantity: 1x holder available -Dimensions: 200/60/H140 mm -Weight: 3.6 kg