pvc profiles used for sale

This machine is particularly suitable for the processing of electric wastes with PVC and rubber. Hole Guide for small diameter from 1 to 10 mm. Quick clamping diameter setting for the large diameter. Adjustable pressure roll continuously over a quick Collet with one hand adjustable. Holes on the base plate to the fasten the machine on a table or work bench.

Cortina DS 3100, working range: 8,000 x 2,000 mm, year of construction Dec. 2004 CNC-controlled cutting machine with robust bridge suspension, form-fitting longitudinal drives and precisely machined guide profiles, Connection voltage: 400 V 50 Hz, TN-S mains (A/PE/N) track width: 3100 mm working width: 2000 mm dead length: 1500 mm Total width: 3525 mm Operating side: left power supply: right fuel gas: propane incl.: OmniCom Explorer C drive 15 m/min DC dual-sided Longitudinal drive on rail feet machine cutting torch ALFA (with internal ignition) OmniFlow automotive supply (gas quantity control up to 6 burners) OmniFlow Control torch suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile first height detection interlock for a maximum of 2 systems HT 4400 HySpeed fine beam plasma cutting system cutting up to 50mm energy supply via energy chain (autogen/plasma) cu ...

Cortina DS 3100, working range: 8,000 x 2,000 mm, built in Dec. 2004 CNC controlled cutting machine with sturdy bridge suspension, interlocking longitudinal drives and precise machined leadership profiles, supply voltage: 400 V 50 Hz, TN-S Network (§ / PE/N) Track width: 3100 mm Working width: 2000 mm Dead length: 1500 mm Total width: 3525 mm Operating side: left Power supply: right Fuel: Propane Including: OmniCom Explorer C drive 15 m / min DC Carrier for double-sided longitudinal drive on Schienenfüßen Machine cutting torch ALFA (with internal ignition) OmniFlow autogen supply (gas volume control up to 6 burner) OmniFlow control Burner suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile initial height determination Interlock for maximum of 2 plants HT 4400 HySpeed fine beam plasma cutting system Cutting up to 50mm power supply thro ...

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Price 3900 Eur (EXW Jonava, Lithuania) Type SBR-250 Working width 230 mm Useful working thickness 100 mm Spreading roller diametre 150 mm Feed speed 28m.min Motor power 0,18 KW Height of working surface 790 mm Additional accessories are available: In-feed stainless steel idle rollers transfer € 550,00 net Out-feed PVC idle rollers transfer € 580,00 net Variable speed with inverter (5/25 mt./min.) € 750,00 net 1 set of two spare rubber rollers € 1,890,00 net Made in Italy Weight 90 kg CE

Aboveground, double-walled stainless steel tanks used according to DIN 6616/2 for the storage of liquid fertilizer ASL/AHL - emptied, cleaned- incl. 2 saddle feet, 1 DOM, 1 leak detector-test report Size: 50.000 litres Diameter: 2,500 mm Length: 10,700 mm Weight: 9,200 kg The tank has a brand new, suitable for liquid fertilizer (ASL/AHL) plastic inner sleeve. This plastic sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL/ASL, as well as NOx reduction agent AUS 32 (AdBlue). Also, we can provide the container with an internal coating of epoxy resin. This coating is also approved for liquid fertilizer (ASL/AHL). In addition, the container if necessary is outside completely sand-blasted, primed and then painted in an any RAL color. The container can be equipped additionally w ...

Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035,  ...

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

Steel of carrier 12 pieces Length of 7600 mm Height 580 mm Width 210 mm Profiles: Length: 1 x Ã? 90 mm x 7600 mm 2 x Ã? 70 x 7310 mm Height: 9 x Ã? 50 mm x 420 mm 3 x 70 x 50 mm 1 x 70 x 40 mm 2 x 70 x 30 mm 1 x 70 x 60 mm 2 x D 70 x 60 x 30 mm Price: â?¬950 per 1 piece Price â?¬10000 per 12 pieces

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. The processing of the cable is carried out in the two-blade system both knives from both sides at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are independently adjustable continuous operation or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical

IMA-PG TR100 blister machine for tablets and capsules in PVC/Alu blisters, output up to 140 blisters per minute. Blister size range from 30 x 60mm up to 128 x 150mm, and up to 12mm deep, currently fitted with tooling for blisters 60 x 140mm. With Laetus checking system. With Multipack F42 blister stacker & stretch bander, up to 40 stacks per minute.

Agitator 0,12 KW with gear motor North i 1:20 and Propellerrührer 150 mm = With beam in aluminium profiles 45 45 mm. Gear motor: i 20 = Flender gear motor, 3 x 230/400 v 0.12 kW, n2 = 67 U/min., M2 = 17 nm, weight approx. 10 kg. Shaft: precision stainless steel shaft D16, length 500 mm, diameter 16 mm, material stainless steel Stirrer: three flight liger propeller stirrer, diameter 150 mm, material stainless steel 1.4581

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

Used pneumatic press 4 KN -Pressing force 4 KN (0.4 to) -Pneumatic cylinder make Festo -Pneumatic two-hand control - press plate made in 4 Guide pillars -Work surface between guide columns 200 220 mm -Machine table made of aluminium profiles and PA plate 600 600 60 mm -3-sided walls from Plexiglas -Total weight approx. 70 kg Suitable for stamping or embossing tools or plate bonding.

Horizontal cartoner with continuous movements with leaflet folder GUK , bar code reader Leatus and coding unit . Product for which it is equipped: PVC trays with ampoules Material of machinable cases: Compact carton with a weight of 220 +/- 400 gr / m2. Cords and pre-attached cases. Clousere: Tuck Automatic trays feeder . Electrical Trifase altering 220 or 380 V 50Hz Motor power 3 Kw Motor power vacuum pump 1.25 Kw Power transformer and service circuits 0.95 Kw Total power 5.20 Kw Air consumption Absorbed 17NL per minute at a pressure of 6 bar Mechanical speed : max 260 per minute Format range A 20 - 160 mm B 12 x 70 mm C 70 x 230 mm

Used agitator 3.0 KW with long stirring shaft 1700 mm With beam in aluminium profiles 45 45 mm. Electric motor: Siemens 3.0 KW, 3 x 230/400 volts, 1420 RPM., IP55. Weight approx. 35 kg. Shaft: precision stainless steel shaft D28, length 1700 mm, diameter 28/30 mm Material stainless steel 1.4301. With 2 rigid couplings stainless steel 1.4301. Stirrer: Prismatic blade, length 300 mm, material 1.4301 stainless steel / polyamide.

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...

<b>Properties:</b> Used pallet roller conveyor Material: Steel (galvanized) Color: Silver Expertly disassembled and packed Modular system for the conveying of Euro pallets The facility consists of 103 segments: 91 piece x 2.495 mm 12 PCs x 2,390 mm <b>technical data</b> Pallet roller conveyor dimensions approx. Total width: 915 mm Width: 850 mm Length: 105mm Rolling cross section: 60 mm Material: Steel Profiles: 80 x 30/40 per segment there are 4 brake roller Roll diameter: approx: 80 mm <b>Pallet roller conveyor</b> Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination. <b>Tailor-made solutions for your intralogistics</b> We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to t ...

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of: Support for the foil of the forming material. Digital thermoregulators at controlled limits. Preheating station with easily replaceable plates treated non-stick. Formation station with "rotary" movement Welding station with "rotary" movement Limiter of the cooling water circuit when the machine is stopped. Sealing material foil holder Internal diameter 70-76 mm External diameter maximum 300 mm. Transfer system from the blister of the cutting die to the blister magazine. Motorization with self-locking three-phase motor with variable speed through inverter. Vacuum pump dry air pressure and air control Protection in plexiglas with safety microswitches. Controls of minimum level foils sealing and formation materials, with a  ...

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient knife length and enough power for most tasks in metal recycling. It is suitable for cutting many materials, such as profiles, pipelines, motors, transmission housings. The scissors are also frequently used for cleaning scrap metals or for cutting vehicle coolers. The machine has a control without electronics and a manually adjustable holder, which also acts as a protective hood. The scissors can be used by foot pedal in single or continuous operation. The opening width is adjustment via simple clamping screws.

EDGE SANDING machine for PANEL and PROFILES type FMB 2 I composition : 1° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 2° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 Blowers for belt cleaning Carpet speed variator from 5 to 25 mt / min Upper adjustable presser with rubber wheels Lateral support for wide panels volt. 380/50

92 lfm pallet shelf galvanized for outdoor nedcon New goods, see pictures! A top shelving system from the large manufacturer NEDCON- this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Frame: Height 7.2 m depth 110 cm, Strong profiles, reinforced indentation, wind & snow load included. Frames & footplates are sendzimir galvanized. Carrier length 2.7 m hot-dip galvanized, Carrier profiles 130/50mm, carrier with load /compartment 4000 kg Negotiated price: € 15,350,-- net from stock Offer consists of: + 36 pcs pre-assembled frame, depth 110 cm, height 7.2 m +210 pcs. carrier, length 2.7 m, 4000 kg load/compartment +420 pcs. Mount fuses + 72 pcs concrete anchor Surcharge hot-dip galvanized feet incl. support protection € 50,- € net per frame Roof construction on request! Load sign documents, etc. are a matter of course. Furth ...

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Double pneumatic table press Bosch brand Built in 1983 maximum pressure 18 kN maximum stroke: 70 mm maximum operating pressure 5 bar Two-handed actuation knob Table made of aluminium profiles Condition used

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

Edge bander type STEFANI BRT UNIVER with trimming unit and automatic feeder for straight, curved and shaped panels . application of melaminic, Pvc, veneer edges, in rolls and strips Technical details: Max panel height mm 60 Edge thickness mm 0,4 - 1,5 Trimming unit 12000 rpm Automatic feeder Overall dimensions: mm 1350 x 1000 x 1150 h Weight kg 480

Agitator 150 litres with agitator 0.55 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Stirrer: Two-winged slanted blade stirrer, diameter 244 mm, material stainless steel 1.4581, wings adjustable at angle.

Stock - No. 1919 1 complete set of extrusion tools/dies for the production of electric cable protection ducts/channels condition as new incl. punching unit used material: rigid-PVC blend

2002 Blister machine Marchesini MB 440 for PVC - ALU. from 1992 Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 305 from 2002 • Continuous movement machine • Automatic blister feeding GUK leaflet folder Bar code reader Booklet feeder System coding for the cartons Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm • Speed up to 240 cartons per minute Check weigher Garvens S2 from 2000

Used blister machine made by Empak, model PRS1. New 1999. The machine is designed for forming nests in PVC foil, packing dragees or tablets into them, closing them with laminated and heat-sealable foils, punching ready-made packages in the form of blisters with their simultaneous marking. Number of blisters across the width of the foil: 1-2. Number of blisters formed in a flat die: 1-4. Stroke: 70-140mm. Molding depth: max 12mm. Forming die area: 130x130mm. Blister dimensions: along the direction of film movement: 25-100 mm perpendicular to the direction of film movement: max. 120mm. Capacity: 60-80 blisters / min. Overall dimensions: L x W x height 2500x900x2000 mm. Weight: approx. 1000 kg. Manufacturer's technical documentation available.

Thermoformer - UPS4 Year - 1993 Min. - Max. Forming width - 62 - 226mm Cycles - 15 - 50 cycles/minute Forming depth - PVC - 12mm ALU - 10mm Blister Format - Min. - 60mm Max. - 140x39mm Punching Area - Length - 226mm Width - 284mm Forming Film width - Min. - 100mm Max. - 298mm Lidfoil Width - Min. - 100 Max. - 298 Tooling - PVC/Alu - 6 Blister line size 39x94mm Alu/Alu - 7 Blister line size 38x86mm Machine Control- PacControl version 2.17 Camera – not included Hapa Printer - H-231-1

Used double-walled agitator 47 litres with agitator 0.12 KW Double-walled stainless steel container, approx. 47 litres container volume, externally heated up to 70°C with temperature control unit / water bath Haake DC 10 and circulation pump. With aluminium traverse made of profiles 45 45 mm and slow running agitator. Agitator with geared motor: Geared motor Georgii Kobold, 230 volts, 0.12 kW, n1 = 2800 rpm, n2 = approx. 20 rpm. Shaft: precision stainless steel shaft D20, length 300 mm, diameter 20 mm, Material stainless steel. Rigid clutch, bare, material stainless steel Stirring organ: Two-winged slanted blade stirrer, diameter 244mm, material stainless steel. Wings adjustable at angle Electric distribution box with 3 sockets 230V, circuit breaker and FI.

lister machine Marchesini MB 440 for PVC - ALU from 1994. Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 355 from 1994 Continuous movement machine Automatic blister feeding Check weigher Garvens S2

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Qty. 1 Second-hand sawing machine Sawing machine Mfc.: Kaltenbach Type: HDM 1431 Built: 2005 General description of HDM 1431 Can cut all types of profiles (quite thick profiles as well) with a straight or angled cut. Generally, angles are not cut with this saw, except for large sections by positioning the V against the bottom. Technical details: Profiles: Height: 50-400 mm Width: 50-1000 mm Cut at 90° min. length: 50 mm Cut at 90° max. length: 24200 mm Cut at 55° min. length: 3900 mm Cut at 45° min. length: 2900 mm Hard blade: Dia.: 1430 mm Thickness: 9.5 mm

Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled. Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc. Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service. Main features: Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability
Easy, tool-less change over: index change and size-related parameters automatically selecte ...

Horizontal baler Manufacturer: MEPAC Type: 30-18 Operating hours: approx. 10 Built: 2014 technical data: Pressure: 220 kN/22 to Filling opening: approx. 1,500 x 900 mm E-connector: 7.5kW 400V 50Hz, 3 Ph/N/PE Connection: CEKON plug 32A Bale dimensions: 970 x 770 x approx. 1,150 mm (W x H x L) Bale output height: 200 mm from the ground Bale weight: up to approx. 450 kg depending on material and length Machine dimensions: approx. 5900x1700x2000 mm (L x W x H) Machine weight: approx. 2000 kg Colour: light blue according to RAL 5012 Execution with: - hyrdaulian front door and - 2 pieces of hydraulic lids for closing the filling box - Binding by hand with polyester tape Description: Stable all-steel welded construction with edge profiles in a compact design. Robust electro-hydraulic, maintenance-free drive ensures easy and effo ...

Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables

Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 350 mm. Size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, Machine controlled using ELAU/Schneider PacDrive, Electrical connection 3x400V, V+N+PE/50-60 Hz, connected load 5.2 kW/12.5A, Operating pressure 4 bar, compressed air 4 to 10 bar. Infeed height approx. 900 mm, outfeed height approx. 900-950 mm. Output up to 60 cycles/collations per minute. Includes: Infeed conveyor, 1100 mm long x 260 mm belt width, outfeed conveyor, 2000 mm long x 260 mm belt width, Alpha Compact labeller, PEWO-collect collating table, miscellaneous sets of format parts

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

Agitator 0.25 KW with aluminium propeller 300 mm With traverse made of aluminium profiles 45 45 mm. Used electric motor 0.25 KW, 3 x 230/400 Volt, n = 1375 rpm, Weight approx. 15 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid coupling made of stainless steel 1.4571. Stirring organ: Two-wing aluminum propeller d = 300 mm.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Sheet filter, Plate Filter Seitz Orion 60 x 60 for Beer, Wine, Juice With 23 stainless steel plates 60 x 60 cm With 56 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1680 mm Width: 3500 mm Length: 820 mm Weight: 1350 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

Sheet filter, Plate Filter Seitz Orion Type 60A100 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A100 No.72044 Year of production: 1975 With 98 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1690 mm Length: 4200 mm Width: 1300 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop