137,153 used machines on RESALE, but how to find them? Machine Search
turning diameter: 550 - 1100 mm clamping length: 1650 - 2400 mm guage width: 1435 mm motor power: 60 (each Chuck) kw spindle turning speed range: 9 - 180 U/min workpiece weight: 3500 kg total power requirement: 228 kVA weight of the machine ca.: 54 t dimensions of the machine ca.: 7,9 x 3,55 x 3,4 m The Hegenscheidt-MFD portal wheel lathe is a wheel lathe that is easy to operate and maintain. Its portal design allows for wheel sets to roll through the lathe on shop rails. The mechanical elements and drive system are designed for cutting performance up to 32 mm² per tool post. This allows for a short floor-to-floor time for re-profiling, even for extreme wheel wear conditions. Mounted to each side of the portal type bed are the headstocks, with integrated drivers, centers and a main drive system fitted to each headstock. Both headstocks are movable for ease of the load and unload functio ...
Pure steam generators Manufacturer Stilmas Type PSG 50 /DTS Clean steam volume 0-max. 50 kg/h at pure steam pressure 3 bar or pure steam volume 0-max. 100 kg/h at pure steam pressure 1 bar The process guarantees the production of dry, sterile, pyrogen-free, pure steam that is free of particles or metal bions. Natural circulation and evaporation takes place between the heat exchanger and the large-area evaporators with an effective droplet separation system, with the steam being produced at a slow flow rate (less than 0.5 m/sec). No contamination is possible between the heating steam, the feed water and the pure steam. The process is simple, safe and fully automatic. The production quantity of pure steam can be fully adapted to the demand, from 0-100 % infinitely. Documents available.
Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg
Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife set for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 590/390/H220 mm -Weight: 71 kg
Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete -Dimensions: 328/190/H8 mm -Weight: 1.2 kg
Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Art.No.: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg
Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: 3 cutting blades, see photos -Hole: Ø 30 mm -Dimensions: 430/310/100 mm -Weight: 22.9 kg
Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist -Manufacturer: Grab hoist, multi-purpose hoist type TU 32 with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16.3 mm / length 30 m -Number: 2x cable pull available -Price: per piece -Dimensions: 680/170/H340 mm -Total weight: 65 kg/set
Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg
Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: Yalel, multi-purpose cable pulley type Yaletrac 3.2 TON -Load capacity: 3200 kg -Steel cable: Ø 16 mm / not included, selection in stock at an additional cost -Number: 2x cable pull available -Price: per piece -Dimensions: 700/150/H370 mm -Weight: 22 kg/piece
Multi-purpose winch, cable winch, lifting winch, assembly winch, rope winch, universal rope winch -Condition: without steel cable -Manufacturer: Greifzug -2x multi-way trains -Cable winch with: 3200 kg load capacity -Robust aluminum case -with: telescopic hand lift poles -Pulling pulleys: 2 -Price: complete -Weight including accessories: 135 kg
The CombiFlash RF 150 provides reversed-phase purifications at a fraction of the cost of preparatory HPLC. The system operates at pressures up to 150 psi (10.3 bar) for your separation needs. The rugged construction you've come to expect from Teledyne Isco makes this a daily workhorse for your demanding routine. The CombiFlash RF 150 is designed to exceed expectations in performance and reliability. Driven by our highly acclaimed PeakTrak user interface, even a beginner user will have this system up and running in minutes. Don't waste your precious time learning complex software when you can start scrubbing up and down samples in minutes. As with all other CombiFlash models, Teledyne ISCO's intuitive PeakTrak software gives you access to all the controls you need from a simple touchscreen. Quickly binary linear program gradients, set a custom step gradient, or set isocratic purifica ...
Without power supply Auction-ID: A1-51267-4064
Without power supply Auction-ID: A1-51267-4068
Without power supply Auction-ID: A1-51267-4069
Diameter van de frontplaat: 700 mm minimale/maximale buisdiameter: 300 gt; 600 mm spindelsnelheid: 50 Hz: 12/23/45/85 tpm 60 Hz: 15/28/53/102 tpm beweging van turret: 180 mm Spindel beweging: 120 mm vermogen: 3,7 kW lengte: 2215 mm breedte: 1700 mm hoogte: 1400 mm gewicht: 2800 kg
ALL PURPOSE 2-SHAFT HEAVY DUTY, HYDRAULIC SHREDDER 1.600 mm.220 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.600 mm long shafts Shredding chamber :1.600 x 1.700 mm, Hydraulic motors 2 x 110 kw, planetary gearboxes, inverter for reverse movement on pre-settable threshold, n.11 knives, 60 mm.thick, 4 hooks (or bespoke to project), Electrical control sy ...
5ft General Purpose Fume Cupboard with Chemical Resistant Centrifugal Fan -The price is not inclusive of dismantling job, chimney, transportation, DOE certificate, etc. 5ft General Purpose Fume Cupboard 1500W x 920D x 2285H with Chemical Resistant Centrifugal Fan (With RN400 Fan 1 15% Casing, RN280 Impeller 24mm Bush (Yellow), 2.0 HP, 4 Pole, 3 Phase Motor, Fan Bracket & Motor Cowl) Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my
ALL PURPOSE, SHREDDER 1.000 mm.45 kW, This is a new machine engineered to offer the best possible results in size reduction of various materials.for plastics, cardboard, pipes, paper, cables, tires, wood and more, This machine is the most cost-effective among similar ones, constructed entirely in Italy with excellent materials, components, and technology, made to last and perform for many years. We can supply all spares and accessories., This is the standard size, the most versatile in its range., Constructed according to the latest safety regulations, it comes with a 12 month warranty and a 24/7 support service., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 1.000 mm. Rotor diameter 190 mm Motor power 45 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ra ...
ALL PURPOSE, SMALL SHREDDER 600 mm.18,5 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This is a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 600 mm. Rotor diameter 190 mm, n.22 bolted reversable cutting pieces 40x40 mm. Motor power 18,5 kW (or bespoke to project), belts transmission to STM gearbox, Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with adjustable run, 0,75 kW hydraulic pack, control cabinet with PLC Siemens 1200 + Siemens HDMI 4” panel., Sturdy supporting structure in solid carbon steel, forklift slits, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Possible Industry 4.0 confirguration on separate offer ...
ALL PURPOSE, SINGLE SHAFT SHREDDER 1.300 mm.55 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This is a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Rotor width 1.300 mm. Rotor diameter 450 mm, Shredding chamber 1.300 x 650 mm. Motor power 55 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with hydraulic pack, control cabinet with PLC Siemens S7, Sturdy supporting structure in solid carcon steel, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Available [loading](.germanplast.eu/listings/4462316-conveyor-with-metal-detecto r) and [extraction](.germanplast.eu/listings/4115563-used-extraction-belt-450 -x-3-5 ...
A pure steam generator from the manufacturer Apparatebau Wärmetechnik GmbH, which was distributed by Spirax Sarco, is for sale with a condensate collector. Heat output: 446kW, max. operating pressure in the tubes/around the tubes: 13bar/6bar, operating temperature min./max.: -10°C/200°C, volume in the tubes/around the tubes: 33l/621l, medium in the tubes/around the tubes: saturated steam/steam. Documentation available. An on-site inspection is possible.
ALL PURPOSE, SHREDDER 1.000 mm.18,5 kW, for plastics, cardboard, pipes, paper, cables, wok and more, This machine is the most cost-effective among similar ones, constructed entirely in Italy with excellent materials, components, and technology, made to last and perform for many years. We can supply all spares and accessories., Ideal to start your own small business or to be dedicated to a few particular scraps., Constructed according to the latest safety regulations, it comes with a 12 month warranty and a 24/7 support service., Rotor width 1.000 mm. Rotor diameter 190 mm Motor power 18,5 kW (or bespoke to project), Electrical control system Siemens S7 PLC control, horizontal hydraulic ram with hydraulic pack, control cabinet with PLC Siemens S7, Sturdy supporting structure, Loading hopper constructed in sturdy carbon steel, bespoke to project, 12 month warranty, Available [loading](.ger ...
ALL PURPOSE 4-SHAFT SHREDDER 1500 mm.134 kW, for plastics, cardboard, cables, WEEE and more, This is a versatile 4.shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic, this machine comes from our long experience in size reduction., Service is available with us and our 24/7 post-sale assistance guarantees that you will never be let down., Rotor width 1.500 mm. Shredding chamber :1.500 x 1.200 mm Motors power 2x45 kW + 2x22 kw kW (or bespoke to project), planetary gearboxes, inverter for reverse movement on pre-settable threshold, Knives: 30+30 50 mm thick, 2 hooks (or bespoke to project for material , size and no.of hooks), screen : 50 mm holes (or bespoke to project), Electrical ...
ALL PURPOSE 2-SHAFT SHREDDER 1.250 mm.60 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 17-21 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 30 kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.25 knives in sturdy steel, 50 mm.thick, 2 hooks (f ...
2-SHAFT SHREDDER 1.250 mm.90 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 13-15 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 45kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.12 knives in sturdy steel, 100 mm.thick, 2 hooks (for plastics, ...
maximum number of results exceeded
please refine your search
1.000 € 
