We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,252 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This AMADA ARIES 245 (1993) Punching machine was manufactured in 1993 in Croatia. This CNC Punch Press has a capacity of 200 kN (44093 lb) and 19 tools. It operates at 11 KVA power and weighs 7.5 tons (16535 lb). The power supply is three-phase with voltage options of 460/400/230/230 volts and frequencies of 60/50/60/50 Hz, with a trip current of 7.5/7.5/10/10 KA. Contact us anytime for further information.
used
TRUMPF 500 R with full automatization LARGE FORMAT 3000mm x 1600mm In good working condition. Fully regular serviced and maintained -new hidraulic pump in 2023! New/Year: 2000 Included: -sheet master -grip master -lift table Control Unit: -Bosch Punching force: -220 kN
used
Description: TrimStar The TrimStar is a very compact punching machine with integrated mold that has combined the functional principles behind the CutStar (bottom mold rotation) and the TrimStar Eco (top mold vertical stroke). Approx. Onsite Dimension. (l x w x h): 2,800 x 2,900 x 3,300 mm, weight approx.: 16,000 kg
used
Description: Flat steel scissors: Knife length: 220 mm Sheets up to: 11 mm Flat steel up to: 120 x 13 mm Profile steel scissors: Angle iron up to: 80 x 8 mm T-iron up to: 80 x 8 mm U and I steel up to: 120 mm Number of strokes: approx. 55 / min. Steel bar shears: Round steel up to: 32 mm Square steel up to: 30 mm Notcher: Sheets up to: 10 mm Latch width up to: 40 mm Latch depth up to: 80 mm Hole punch: Punching capacity: approx. 35 t = 25 Ø x 11 mm / 20 Ø x 13 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,800 mm, weight approx.: 900 kg
used
plate width: 1,524 mm, plate length: 2,540 mm, plate thickness: 0,5 - 3,5 mm, max. punching diameter: 33 mm, weight approx.: 21,000 kg, Approx. Onsite Dimension. (l x w x h): 21,000 x 7,000 x 2,500 mm
used
Description:  , , ,Serial Number: 32510005 Technical Data Laser: Co2 laser Control: FANUC AF2000C Power: 2kw Technical data Punching machine: Working dimensions:  , 1500 x 2500 mm without repositioning , 1500 x 5000 mm with 1 repositioning. Force: 196 KN Power: 53kva Max. material weight: 280 kg Max. material thickness: , 6,4 ,mm Tool stations: 31 (tooling not included) Max. tool diameter: 88,9 mm Tool change time: 1,5 sec. Automatization ,system Included  , Serial Number: 835 Model: PR UL 300  , ,AP , YOM: 2004 Capacity: 3000kg Power: 5,5kw Stacking Area. 3 400 x 1 400 mm CE standard Note: Machine was dismantled by AMADA and now , is stored laser capacity: 2 kW, control: FANUC AF2000C, total power requirement: 53 kW, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 8,320 x 4,203 x 2,773 ...
used
We sell Turret punch press - MP10-30 used, 2007, manufacturer JIANGSU YANGLI GROUP CO. Possible leasing, rent-to-own. They are also interested in intermediaries with a place to store equipment (they are ready to pay for rent). MP10 CNC series punching machine has a body structure (ZL2004 2 0108852.4), which adopts tempering treatment. German I + L. The hydraulic system has reliable performance and low power consumption (1 1 kW). FANUC CNC system OIS or SIEMENS 840D is used on this punch series. The revolving type (ZL 022 1821 1.X) features a long sleeve structure and the station index has a sectional wheel and a worm gear.
refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately
<br><br><br>Still in operation: Yes<br>Available: immediately
overhauled in 2007 spare parts Still in operation: Yes Available: sofort
used
Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request
used
for manual cutting of punched oil carton stencils, with autom. Cardboard feed, font size 7/8inch = 22 mm with the letters of the alphabet, numbers and all common Punctuation.
used
manual production of punched oil carton stencils, with autom. Cardboard feed, with large handwheel for simple operation, with the letters of the alphabet, numbers and all common punctuation marks Font size 1/2 inch = 13 mm
used
Standard equipment; Ready
used
used
Pneumatic marking press stroke length: 150 mm Maximum pressure capacity: 8 bar Movement stage: 420 x 750 mm Between posts: 650 mm Connection: Pneumatic Dimensions Lxwxh: 85 x 100 x 170 cm Machine weight: 300 kg
used
; ready for immediate use
used
With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work
used
Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t
used
With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.
used
used
used
Equipment: 5 Sledge units 1 Two-point excenter press 70 kN working range: Drahstaerke range: max. 3.0 mm width: max. 40 mm feed load: max. 170 mm power: max. 250 rpm; ready to use
used
1 LABEL DIE CUTTING MACHINE PMC MODEL F -Year of manufacture 1990 -Four-sided guiding system jogs and holds the stacks on all four sides during the die cutting operation for precise die cutting. -Full control of stacks through feeding, guiding and die cutting eliminates manual jogging. -Convenient adjustment of guides and die with clear view of die register on labels speeds set-up and reduces waste. -Labels are safely loaded outside die cutting area. -Typical uses: labels, note pads, credit cards, identification tags, postal cards, game cards, 3-way trim, round cornering. -Materials: paper, plastic, vinyl, Mylar, paperboard Specifications Model F: Maximum Pre-cut Size 184mm x 184mm(7.25” x 7.25”) Minimum Pre-cut Size 32mm x 32mm(1.25” x 1.25”) Maximum Die Cut Size 178mm x 178mm(7” x 7”) Minimum Die Cut Size 25mm x 25mm(1” x 1”) Recommended Tri ...
used
Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.
used
Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm
used
Handle hole punch (bags) -Knuckle punch with punch and die for 20 x 90 mm handle hole -Suitable for bags or paper bags
used
used
Format: A3 // Paper format: ca 31x45cm
used
a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible
used
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
used
Complete with automatic sheet storage tower
used
Copy and coordinate nibbling machine make TRUMPF type CN 701Machine -No: 1118Technical specifications:Horizontal projection: 1550 mmWorking area: 1250 x 1300 mm: 1250 x 2000 mmSmallest section of a circle for copy nibbling: 12 mmsmallest circular diameter with internal circular guidewhen shearing: 56 mmsmallest circular diameter with internal circular guidewhen nibbling: 65 mmstepless stroke rates: 350-1400 H / minWorking height: 1020 mmDrive power: 2.2 kWExternal dimensions approx .: 2900 x 950 x 2130 mmWeight approx: 2125 kgWith- lots of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate
used
Large Format 3000 x 1500mm With Automation Siemens 840
used
pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...
used
Condition: Very good condition
used
pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t no. of strokes: 70-420 Hub/min sheet width: 160 mm ram - range of adjustment: 80 mm : 300 mm table surface area: 750x660 mm ram surface: 690x460 mm total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2500x2500x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
automatic full punch for cardboard & plastic Manufacturer - Ruge & Singer Model: 7404 Year: 2010 Location: germany Material Condition - used, little time in use, as the purpose is no longer given. Accessories - tool kits Price: on request
used
Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system for shortest set-up times User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
used
Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system for shortest set-up times User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
used
Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
used
Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
used
Bihler RM 30 E punch bending machine Bihler RM 30 E punch bending machine for the production of stamped and bent parts made of strip and wire. Compact machine system for the production of precision stamped bent parts User-friendly machine and process control Bihler P CNC 400 Compatibility with RM 35, RM40 and RM4 tools Year of construction 2003 Machine housing and perforated plate Specifications Machine power: 5 - 400 strokes/min Feed length: max. 240 mm Backing edge of the strip: max. 80 mm in front of perforated plate Strip bottom edge: 4 mm above center machine Material dimensions: strip width max. 60 mm, wire Ø max. 4 m Material feeder right (176-05-00195.0) 240 mm feed length Specifications Material trailing edge: 80 mm in front of perforated plate Material bottom edge: 4 mm above center machine Material width: max. 60 mm Feed length: max. 240 mm ...
used
Manufacturer LVD Model Delta 1250 TK Year 1997 Capacity 20 Ton Machine is in good condition
used
The best preserved Amada Europe 258 machine on the market Only 17,000 hours Year 2003 It can be seen at work only until the end of October this year
used
30 ton 1250 x 2500mm
used
Power = 18t (up to 6.4mm) With the CAM TOPS 2000 software Speed up to 900 strokes per minute