punching machines 1250 used for sale

Mori seiki MT 2000 multitasking lathe :::TECHNICAL SPECIFICATIONS::: CNC model: Mori Seiki - CNC version: MSC 501 - Spindle nose: ASA 6 - Spindle power: 22Kw Number of main spindle speeds: 6000 - Turning diameter: 540mm - Bar passage: 65mm - Turning length: 1020mm Number of tools: 60 Tool holder: CAPTO C6 Spindle power: 18Kw Number of spindle speeds: 8000 X-axis travel: 565mm Y-axis travel: +-80mm Z-axis travel: 1077mm Swivel B-axis travel: + - 120 ° degrees Fast feeds for linear axes X Y Z: 24m/min High refrigerant pressure: yes Pressure value: 80bar External tank system with filter: yes Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 155mm First turret Z-axis travel: 1067mm Sub-spindle: yes Spindle nose: ASA 5 Number of counter ...

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Key data: 400 mm, 1100 mm, 3500 1/min

Machine Details Stock-No. 1105-04040 Type of machine CNC Lathe Make NAKAMURA Type SC 300 L Year of manufacture 1998 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time by arrangement from the location Freight basis EX WORK Price Technical details turning diameter 350 mm turning length 1150 mm control FANUC 21 t turning diameter over slide 300 mm turning speeds 3500 rpm rapid traverse 20/25 (X,Z) m/min power capacity 22 kW Additional information NICE MACHINE TURNING LENG 1150 CNC FANUC 18 T WITH LIVE TOOLS ANS C AXIS CHIP CONVOYER HYDRAULICK STEADY SMW Technical details and information subject to amendments and errors. 2024 Created with ModulMWS by LogoTech oHG

optional with 2 to 10 stainless steel boilers with pliers lock with control cabinet Boiler capacity approx. 190 litres for max. 120kg dough or for a maximum of 75 kg flour with Eaton PLC control Machine is in very good condition

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

used Rheon Free Divider VX 111 from 1998. With a long spout tape and a large funnel. We will be happy to send you further pictures and information on a request for comment. Stainless steel cladding mobile on wheels Flour bestuber digital control 380V - 50Hz - 3.5A Dimensions: Height: 180 cm Width: 445 cm Depth: 105 cm

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Fully functional used CNC milling machine Deckel Maho DMU 60 with rotary table Built in 1999 Heidenhain Control We would like to point out that this machine is in excellent technical and well-maintained condition for its age (due to the IATF certification). Regular maintenance is already required on the basis of the certification and the machine therefore works 100% perfectly. The machine is still energized and can be viewed and tested at any time. All maintenance logs are in place. The machine will have to leave the hall in the first quarter of 2025. This means that the machine could remain energized until mid-March 2025 to demonstrate it under power. Of course, the machine would also be available immediately. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your answer and interest in adv ...

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Key data: 135 mm, 1550

Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 lt. Description: The ERBA Turbo 20 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 20 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will  ...

Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...

Control UCC lite-2 Measuring range 700 x 450 x 350 mm Measuring heads (MH20i, PH1, PH6) Various touch probes

Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm 40 mm: Price 60 Eur (EXW Jonava, Lithuania) 60 mm: Price 68 Eur (EXW Jonava, Lithuania)

Key data: 220 mm, 1550

Machine type: Turbo 35 Manufacturer: ERBA Power kW: 1.5 Total volume: 35 lt. Description: The ERBA Turbo 35 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 35 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will be happy  ...

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

Table diameter 2,000 mm Max. Turning diameter 2,150 mm Turning height 1450 mm Table speed 3-140 rpm Max. weight of the workpiece 12000 kg Milling spindle: Maximum speed 2,000 rpm Milling spindle Motor power 22 kW Total weight of the machine approx. 34,000 kg Machine complete with: C-axis: 360,000° Milling spindle 22 KW Tool changer 16 positions Tool changer for milling tools ISO 50 16 positions Complete cladding Conveyor Complete cooling system with filtration

Key data: 270 mm

Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 lt. Description: The ERBA YE 200 separation line is used to separate workpieces and grinding medium. Two motors provide the necessary movement of the screen. The YE 200 can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to ...

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

Type MB104H Max working width 400 mm Knives 4 Feed speeds 7/14 m/min Min./max. working height 3,5-300 mm Main motor power 4 kW Suction hood diameter 100 mm

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Machine Details Stock number 1105-04042 Machine Type: Surface Grinding Machine Make JACOBSEN Type 1432 Year of construction 1992 Condition Conventional control type Storage location HAGUENAU FRANCE Country of origin Delivery time at short notice - by arrangement. Freight base delivery from site. Price Technical details Grinding length 900 mm Grinding width 410 mm Travel - x 900 mm Travel - y 410 mm Travel - z 300 mm Machine weight approx. 2700 kg Information Distance table - spindle center: 135-575 mm Table speed X: 30-30000 mm/min. Table speed Y: 4-3750 mm/min. Table speed Z: 4-4000 mm/min. Max. grinding wheel dimension: 300x50x76.2 mm Drive power grinding spindle: 4.7 kW MAGNETIC PLATE BRAILLON 800 X 400 MM 5 GRINDING FLANGES

Bread slicer Wabäma Type Piccolo 380.10 HA MB Cutting width 10mm semi-automatic 230 Volt 0.75 kW

Automatic Cutting width 9mm 192 kg 1.1 kW 400 Volt - 50 Hz

Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz

Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight approx ...

ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition

Very good machine with spare parts worth 3000,00â?¬.

Bread cutter Wabäma Model: R 400 EX The all-rounder among bread slicers EX model for installation in the sales counter! Max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular cutting machine with bread halving Round blade made of high-quality Teflon special coating Circular knife machine mobile Cutting thickness adjustable from 4 to 25 mm DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 750 x 860 mm, WxDxH Used machine cleaned 6 months warranty Option: Maintenance contract Spare blade Service Package Delivery & Installation Instruction & Commissioning We have a wide range of bread slicers!

with boiler for max. 125 kg flour or 200 kg of dough with 2 timers automatic Boiler diameter 90 cm Boiler drive by Reibrand Boilers are locked with hand extendable with 2 timer relays automatic 2 speeds fast and slow Flour dust cover Spiral and tool made of stainless steel Boilers are also made of stainless steel Machine is anchored to the ground with 2 screws Machine head moves up or down when the boiler is driven in and out

Bread Slicer Circular Knife Machine Wabäma Model: R 400 The all-rounder among bread slicers Max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular cutting machine with bread halving Counter and preset for number of discs with integrated drawer Round blade made of high-quality Teflon special coating Machine mobile with brake Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 720 x 1110 mm, WxDxH Used machine cleaned 3 months warranty Option: Maintenance contract Spare blade Service Package Instruction & Commissioning Wide range of bread slicers

for cleaning their sheets with oil tank (food oil) for 60x40 cm sheets 2-edge on the short side for 58x78 cm sheets 2-edge on the long side Shipping costs on request

x-400,y-330,z-350,angle table 630x335,SK 40, 40-6,000 rpm,measuring probe

Flaschenreinigungsmaschine, Hersteller Swiss PAC, Baujahr: 1992, Leistung 3.500 - 6.000 Flaschen / Stunde. Bottle washer washing machine, Made Swiss PAC, Year: 1992, Capacity 3.500 - 6.000 bph, in stainless steel

Pull-off trolley with 9 cloth pull-off apperates suitable for Heuft VTR Thermo Roll / Daub RDTO Thermo Roll oven. The pullers can be used for ovens with 2 times deep sheet metal mass 80x60cm. With this pull-off appress and a stone slab trolley, they can also bake in the Thermöl wagon oven on stone served by a Man.Option we also have the stone slab cart for two times deep oven in the warehouse. with 9 pullers on rolls Stainless steel trolley Dimensions wagons: Height: 196 cm Width: 160 cm Depth: 90 cm

Wrapper Universum Kasper Model: HWM 40/60 for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls Wrapping weight range approx. : 30 to 280 grams depending on TA Bottom cone wrapping machine with long roller for strands and pretzels max 600 mm long DGUV V3 tested Output approx. 2000 pieces/hour Machine mobile Stainless steel Connection 400V, 16A-CEE plug Dimensions: 790 x 820 x 1300 mm, WxDxH Used machine overhauled 3 months warranty + service Option: Wrapping of 300 to 800 grams with train Service Package Maintenance contract E-Box Instruction & Commissioning More TOP cone wrapping machines are waiting for you!

Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

1 LIBA type COP 2 HS, width 170", gauge 28, year 1980, with PROKOSTOP 4044 1 LIBA type COP 2 HS, width 170", gauge 24, year 1980, with PROKOSTOP 4044

SG Innoscan CVTCorecvSIGx inspection machine for vials, etc., rotary infeed table, total of 7 camera inspection stations with automatic height adjustment, Particle 1+2 (inspects for moving particles), side inspection (inspects for filling level, cosmetic defects of barrel and crimp defects of cap), top cosmetics (inspects for defects at cap area, scratches, crimp, contamination, displacement of cap, Flip-off inspection), bottom C&C (inspects for chips and cracks at the heel area and on the bottom surface), bottom cosmetics, particle low density (inspects for light particles and fibers), 1 inline outlet + 3 outlet trays, includes format parts for 2R vials, capacity up to 600 vials per minute (machine in excellent condition – hardly used)

Code: 0705 Brand: LANDONIO - ITALIA Model: LAR 600 Double disc sanding machine for working of patterns , moulds, wood pieces , metal and synthetic material Disc diameter mm 600 Motor Hp 6 Table size mm 800 x 300 Tables inclination 0-30° upwards/downwards Disc rpm 950 Spare disc Overall dimensions : mm 1250 x 800 x 1150 h Weight kg 580

1 stitch bonding machine KARL MAYER type MALIMO MALIWATT 1405C N3600, machine fully overhauled in 2013, width 3600 mm, gauge 18, 2 bars,

Key data: 85 mm, 255 mm, 6300 1/min

CNC lathe Emco E25 Powermill TCM Commissioning 03/2019 At call! Siemens 828D Shopturn Main spindle spindle passage 25mm PF - 6,300 1/min Turret 12-speed VDI16 driven tools 6,000 1/min PC Keyboard Machine set-up and fastening material Parts collection device Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun 8-bar high-pressure coolant device Power Chuck 95/3 Röhm Pliers chuck KZF 20 for 148E Tool holder pact stationary/driven 9 pieces Radial Milling Holder VDI16 2 WStück Axial Milling Holder VDI16 2 WStück OPC UA / Siemens interface The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its used machines on its own. We are not a machine dealer, but the machine user! The machine is in use in our company until it is sold a ...

1 PIMATEX type MTFC020 high temperature yarn dyeing machine vertical type, capacity 20 Kg, year 2004 carrier with 6 swords and each sword carries 4 cones gauge 6" = 24 cones each batch 1 PIMATEX type MTFC030 high temperature yarn dyeing machine vertical type, capacity 30 Kg, year 2001 carrier with 9 swords and each sword carries 4 cones gauge 6" = 36 cones each batch 1 PIMATEX type MTFC050 high temperature yarn dyeing machine vertical type, capacity 50 Kg, year 2001 carrier with 16 swords and each sword carries 4 cones gauge 6" = 64 cones each batch 1 PIMATEX type MTFC100 high temperature yarn dyeing machine vertical type, capacity 100 Kg, year 2001 carrier with 24 swords and each sword carries 6 cones gauge 6" = 144 cones each batch 1 PIMATEX type MTFC160 high temperature yarn dyeing machine vertical type, capacity 160 Kg, year 2001 carrier with 36 swords and each  ...

on chassis

Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated Chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. A green coffee loader and destoner can also be included. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profiling), - installing new cooling bin sheathing, - rebuilding the burner, - building a new c ...

Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit

1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...