We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 1200-3078)
used
Excenter screw pump Manufacturer: Fryma Type: N20A Built: 1990 with Stöber gearbox speed-controlled Speed: 126/880 rpm very good condition LWH: 1250 x 300 x 300 mm
used
Excenter screw pump Manufacturer: Fryma Type: N20A Built: 1987 Speed: 700 rpm very good condition LWH: 1200 x 350 x 410 mm
used
#4444 - VACUUM PUMP GARDNER DENVER Manafacture: Gardner Denver Power: 7.5 kW; 8.8 A; 350 mbar
used
centrifugal pump Manufacturer: GEG Alsthom Electrical Machines (Australia) Item #: 0412280/10/VD Power: 5.5 kW Speed: 2880 rpm LWH: 750 x 350 x 500 mm
used
Vacuum pump Manufacturer: Grundfos Type: CH12-30 A-W-A-CVBV LBH: 400 x 180 x 240 mm
used
New (secondhand) Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. Pump materials in contact with the liquid are in high-grade stainless steel. The mechanical shaft seal is a special designed, unbalanced O-ring seal. CM 5-4 (photo 1 and 2) Rated flow: 4.7 m³/h Rated head: 30.7 m CM 3-4 (photo 3 and 4) Rated flow: 3.1 m³/h Rated head: 27.4 m
used
Manufacturer: Grundfos Type: CME 3-5 A-R-I-E-AQQE S-A-D-N Condition: as new (short in operation) Pump speed: 3480 1/min Nominal flow rate: 3.72 m³/h Nominal head: 49.62 m Number of wheels: 5 Ambient temperature: -20 .. 55 °C operating pressure: 16 bar Location: Homburg
new
New (second hand) pump Grundfos CR 5-15 Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line) enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easy service and access. Power transmission is via a split coupling. Pipework connection is via oval flanges with internal Rp threads. The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
used
Plant: Second-hand Grundfos pressure increase station Type: CR30-20 Model: 50000 PL9017 -: 2900 min Performance: 30 m, m³/h Height: 20.5 m Maximum pressure: 16 bar Temperature: Max 110 C.
used
Grundfos CR64-3-1 A-F-A -R-HQQE Multistage Centrifugal Pump Rated speed: 2923 min-1 Nominal flow rate: 64 m³/h Power requirement : 15 kW Nominal head: 79.8 m Rated voltage: 3 x 380-415D/660-690Y V More centrifugal pumps new and used - you can find them in our shop! International shipping costs on request!
used
Grundfos pump, order number 96500570, power, 4 kW/ 50 Hz, good condition - ready for use
used
Multicellular centrifugal pump manufactured by GRUNDFOS in stainless steel. Model CRN15-05 A-FGJ-G-E-HQQE General characteristics: Maker GRUNDFOS Model CRN15-05 A-FGJ-G-E-HQQE Guy Multicellular centrifugal pump Material Stainless steel Weight 93 Kg Specifications: Maximum flow rate 17 m3/h Maximum pressure 25 bar Maximum temperature 120 ºC Manometric height 70.6 m Engine 2917 rpm
used
Stainless steel multicellular centrifugal pump manufactured by GRUNDFOS. CRN15-05 A-FGJ-G-E-HQQE model.
used
Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Submersible pump, in steel vessel, Q= 10 m?/hr., H= 36-41 m, 1860-1980 rpm, 15,0-20,0 kW, with Seva electro motor, 30,0 kW
used
Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KSP50/6399/772097 Year of construction: 1990 Power: 2.05 kW very good condition LWH: 460 x 240 x 400 mm
used
Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KRP50/832107/6286 Year of construction: 1988 Power: 3.8 kW LWH: 440 x 270 x 400 mm
used
centrifugal pump Manufacturer: Hilge Type: Durietta I-100-60,75 Item #: S7 6253 Engine power: 0.86 kW LWH: 370 x 240 x 280 mm
used
Centrifugal pump Manufacturer: Hilge Type: Hygia II/30C Power: 11 kW Speed: 2930 rpm LBH: 650 x 400 x 410 mm
used
Centrifugal pump Manufacturer: Hilge Type: Hygia SII/10B No.: HS2 10B 69 4553 Power: 3 hp with spare part LBH: 650 x 400 x 350 mm
Centrifugal pump Manufacturer: Hilge Type: NDC 40-200/5.5/2 No.: 034-05-003880 Power: 5.5/6.3 kW LWH: 630 x 300 x 300 mm
used
HOVAP AP-Z-2550 Self-priming centrifugal pumps YOM: 2002 5.5 KW 2925 rpm 30m3/h Two pumps available Excellent working condition
used
Used pump for milk, made by HPM, model H 55 P. New 2002.
used
Hydraulic pump for centrifuge
used
Stainless steel centrifugal pump manufactured by INOXPA. in 2015. HCP PROLAC 40-150 model.
used
Centrifugal pump manufactured in stainless steel.
used
Stainless steel centrifugal pump manufactured by INOXPA.
used
System: dosing pump Manufacturer: Jesco Prod.-No.: 37142 Type: CC 10/40 Year: 05/2003 IP: 55 KW: 0.05 Rpm: 1440 Hz.: 50
used
Max 15 BAR 4KW 380 RPM Excellent condition
used
Type: B261 / 5.25 22-50 No.: 16316 Drive North Type: SK 22-100 L / 4 TF No.: 8943557.00 n = 218 min-1 Motor North Power: 2.2 kW Dimensions: LWH = 1000 x 240 x 430 mm Weight: approx. 80 kg
used
Gear pump Manufacturer: Johnson Pump wings made of rubber Power: 1.1 kW good condition LWH: 800 x 370 x 360 mm
used
Koch Pumpentechnik (Porta Westphalica) Built: 2007 Type: FP2/40-125/302 Power: 20 m3/h at 18 m height (water) very good condition Engine power: 3 kW/3.45 kW Weight: 70 kg Diameter inlet: 65 mm Diameter outlet: 50 mm Milk pipe LWH: 500 x 230 x 360 mm
used
2 centrifugal pumps / self-priming Type: KSP 50 /150-2.3 Manufacturer: KPA Artern, Germany Capacity: 10,000 l/h Speed 1,420 rpm. Connections: Inlet NW 50 / Drain NW 50 Material: Stainless steel Medium: beer, wine, milk, etc. Connection: 380 V, 2.2 KW Weight: approx. 43 kg Dimensions: 50 x 30 x 35 cm Technical condition: refurbished
used
KPA Kyffhäuser; CN 35/4B; side channel pump; food pump; normal-priming hygienic centrifugal pump for beverages and other liquids; Motor is from ATB; Flow rate: 2,000l/h; Head: 3.8bar; Version on height-adjustable feet made of stainless steel. Ser. Nr. : 11123 diam. : Impeller 161mm elek. Voltage : 230/400V elek. Power : 4.0kW Speed : 2.900U/min Weight : 39Kg
used
side channel pump; food pump; normal-priming hygienic centrifugal pump for beverages and other liquids; Motor is from ATB; Flow rate: 2,000l/h; Head: 3.8bar; Version on height-adjustable feet made of stainless steel. Ser. Nr. : 11123 diam. : Impeller 161mm elek. Voltage : 230/400V elek. Power : 4.0kW Speed : 2.900U/min Weight : 39Kg
used
Pressure booster system, centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: KSB Type ETALINE ETL 150-150-200 GGSAV10D301104 Year of construction 2017 Pump wheel Ø 221 mm Q 2x 209 m³/h at 14.5 m 11 kW Control KSB PumpDrive PDRV2__011K00 Dimensions approx. 2500 x 1200 x 1500 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200
used
Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200
used
KSB centrifugal Pump
Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes
used
Kyffhäuser Pumps Artern GmbH Type: KN 33/18 Y.O.M.: 2009 Capacity: 1 m3/h at 6 m height Power: 1.1 kW Pump as good as new, unused Dimensions LWH: 500 x 300 x 300 mm Weight: about 20 kg
Rotary piston pump Manufacturer: Ledele GmbH Type: KRL65PN Built: 1998 Engine power: 2.2 kW Gearbox: Stöber speed-controlled Mobile very good condition LWH: 1200 x 600 x 620 mm
used
Piston dosing pump, type EK 1 H, with batch control via electric pulse preselection counter incl. remote summier movement. Working pressure 7.5 bar, max dosing current 290 l./h, pipe connection Rd 34 x 1/8 inch with hose sleeve NW 15, with control cabinet, mounted on table.
used
Piston pump with drive 0.25 kW / 1.325 RPM, stroke length: 1 - 15 mm, stroke frequency: up to 110 rpm.
used
Piston pump with 0,25 kW / 1.325 UPM drive, stroke length: 1 - 15 mm, stroke frequemcy: up to 110/min.
used
System: diaphragm pump Type: LEWA G3H M511S Gr. 30 Description: with diaphragm pump head, material stainless steel Year of construction: 2002 / refurbished 2008 Stroke length: 30 mm Hubfreqquenz: 175 min1 Rod power: 16000 (N) Measuring current at pmax: 170 (ges. 510) l/h Max.Zul. working pressure: 250 bar at least. suction flange pressure: 1.0 bar Connections: Suction and pressure side DN 15 Pump body: Stainless steel 1.4571 Diaphragm: PTFE Guide / ball: 1.4581 / 1.4301 Speed: 1440 RPM Power: 7,5 kw Voltage: 230/400 Technical documents: Yes
used
Dosing pump make Lewa HK1, No. 96430,
used
Rotary piston vacuum pump manufactured by Leybold . E150 model. With an oil capacity of 5.4 L and a noise level: 76 dBA
used
Stainless steel centrifugal pump manufactured by LINX. S-30 model.
used
Type: LOWARA used water pump Machine number: 02193 Pump: C0350/09/A Q: 6-24 m m³/h H: 12.7-5.9 m P2: 0.9 kW Hmin: 5.9 m Engine: 3 SM71BG / 309-50 Hz