pumping used for sale

Mobile pumping station w / air driven pump and 2 "camlock couplings and flushing. Build in PE plastic.

Equipment: HHS re-pumping gluing unit for disc slime sub-gluing unit fully automatic with capacitive contactless sensor, High-pressure pump, metal frame.

Chemical pumping station PAGUS plastic cabinet 700 x 830 x 1590 mm Air diaphragm pump ALMATEC AC-E 10 operating pressure: max 10 bar cabinet almost metal-free ! Dimensions: 700 x 830 x 1590 mm

Year of construction 2008 Pumping and control station Previously used on Heidelberg machines Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Article: pump Manufacturer: Grundfos Type: 71A2-14F85-B Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

USED CENTRIFUGAL MOLECULAR DISTILLATION SYSTEM Manufacturer: MYERS VACUUM, Inc. Model: PILOT 15 LAB Throughput Capacity 10 - 80 lbs/hr (4.5 – 36.3 kg/hr) Type Continuous Pumping system ultimate pressure: 2 X 10-4 Torr Operating Pressure 10 -3 Torr to Atmosphere Mechanical Forepump >11 CFM High Vacuum Pump 320 L/sec of air at 250C. Power: 10-15 KW/ hour 3 phase wye” 115/208 V, 5 wire 50/60 HZ Available for 230, 415 or 460 Volt. Water: (20°C) 2 gal/min (7.6 L/min) Liquid nitrogen consumption: 0.5 liters/ hour (Utility consumptions may vary depending on process conditions) Dimensions: Height 69 Inches (1.75m), Width 34 Inches (.86m), Depth 59 Inches (1.5m) Net Weight 1300 lbs. (590kg) Centrifugal molecular distillation is a purification technique, which has gained wide acceptance in the chemical, food processing, pharmaceutical, and petroleum industries as well as t ...

Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140m3 - Mixing and equalisation tanks 2, 40m3 - Mixing and equalisation tanks 3, 80m3 - Bioreactor 1, 240m3 - Bioreactor 2, 240m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100m3 - Secondary sedimentation tank 2, 100m3 - Thin sludge tank, 70m3 - Thick sludge tank, 90m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25m3 - Various process water pumps, Bioreactor capacity 2 x: 240 m3, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x  ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Laser system 50 Watt, FOBA DP50 for marking and engraving Ideal for beginners or as an extension Deflection unit Scanlab, 254 mm Rodenstock lens with MB RAM and 17" monitor arm, Diode pumping chamber only about 2500 hours in use ready for use, built in 2003 Options: - Suction - other lenses - Machine table (various versions) - Double head/beam splitter Laser system completely cleaned and tested 6 months warranty excl. pumping chamber, place of warranty Lüdenscheid VAT will be shown Delivery EXW, collection possible On request also: Commissioning, instruction and training, maintenance concept, sampling of your workpieces

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

The Hidrostal Betsy 125GG (popularly also called eekels pump), has been a great success for years! main reason for this:, , spacious dirt passage, pumps viscous liquids with solid particles, high output against a particularly low engine power, suctions very quickly and up to a great suction height (8.5 meters), blockage-free wear-resistant screw centrifugal impeller, can slobber and can run dry, , Machine can be used well for:, , pumping sludge, Keeping sewer wells and cellars dry, everywhere that really needs to be sucked and slobbered, emergency pump unit including fire brigade, water boards and, Water purification, pumping surface water, keeping construction pits and construction trenches dry, , MAX capacity : 342 m3/h at 1500RPM , 400 m3/h at 1800RPM, MAX head : 26 mwc at 1500RPM , 39 mwc at 1800RPM, MAX dirt passage : 100 mm, , Throughput capacity: 340 m3/h, Max dirt passage: 100 ...

Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER Manufacturer UAT UNIVERSAL AQUA TECHNOLOGIES INC USA Model TP 110K Year of production 2001 Capacity 12 000 L h Operating hours 9 810 Volts 380 Hz 50 Ph 3 Description of equipment MM FILTER INPUT WATER TREATMENT REVERSED OSMOSIS UAT UNIVERSAL AQUA TECHNOLOGIES INC USA 2001 DEMINERALIZED WATER TANK 12 m3 PUMPING BLOCK FOR MINERALIZATION MINERALIZER MINERALIZED WATER TANK PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Technological description of table water production a General The plant for the production of table water has a capacity of 12 000 l h It consists of Sand filter Device for reverse osmosis TP 110K Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation disinfection of min ...

This BBA PT160 compact is built into a sound attenuated enclosure fitted with Hoist frame. Is self-priming, Electric starting - Quick Coupling Press and Suction 4 V Part Cardan This BBA PT-160 piston pump is designed for vertical and horizontal pumping. These positive displacement pumps are self-priming and ideally suited for pumping a mixture of water and air without any restrictions. Moreover, these pumps can run dry carefree, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection , MAX 60 m3 per hour , MAX : 20 MWK, , Throughput capacity: 60 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passag: 1500 rpm, Weight: 1500 kg, , = More information =, , General information, Year of manufacture: 2006, Applicable material: Water, , Weights, Empty weight: 1.800 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 1.000 l, Quick coupl ...

This BBA PT160 compact is built into a sound attenuated enclosure fitted with Hoist frame. Is self-priming, Electric starting - Quick Coupling Press and Suction 4 V Part Cardan This BBA PT-160 piston pump is designed for vertical and horizontal pumping. These positive displacement pumps are self-priming and ideally suited for pumping a mixture of water and air without any restrictions. Moreover, these pumps can run dry carefree, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection , MAX 60 m3 per hour , MAX : 20 MWK, , Throughput capacity: 60 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passag: 1500 rpm, Weight: 1500 kg, , = More information =, , General information, Year of manufacture: 2006, Applicable material: Water, , Weights, Empty weight: 1.800 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 1.000 l, Quick coupl ...

Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping

Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids

Solid pump sewage sludge pump Saxlund with double hydraulic aggregate 90Kw + 18.5 Kw used Solid pumping system consisting of 2 x solid piston pumps (duplex pump) oil-hydraulic drive/hydraulic unit. For reliable conveying of sludge of all kinds. Manufacturer: Saxlund 2 cylinder solid piston pump / double pump: Type: 119083 Komm.Nr. 2925-30/59410/2 Operating pressure: max. 280 bar 100/63/1000 Outer diameter: 140 mm Inner diameter: 13 mm Dimensions: 1x approx. 3,700 x 700 x 1,300 mm Dimensions: 1x approx. 3,750 x 850 x 1,800 mm Drive hydraulic unit: Square Bosch Hydraulics Saxlund 9710026 HA1-0 4069 No. SAX.2925-30 Built: 1998 V = 1200 P = 90 kW P = 18.5 kW Dimensions: approx. 2,400 x 1,700 x 1,900 mm ---------------------------------------------------------------------- ---------------------------------------------------------------------- ----------------  ...

Fristam FPE1232/185A 30 kW pump capacity: 50.000 - 200.000 l/h The specific profile of their impellers provide for a steady, smooth flow with minimal secondary swirl even at high flow rates. Universal use, gentle product handling, robust, easy to maintain, durable, economical. The Fristam FP’s well-thought-out design provides you with the optimal solution to your specific requirements. Fristam pumps FP are designed with open impellers, with narrow gaps between the impellers and the cover. Combined with the flow-optimised pumping channel, these ensure minimal secondary flow, very gentle product handling even at high volumetric flows, and energy-saving operation. The FPs’ design makes them ideal for hygienic applications. The pumped medium may be homogenous, or contain air, gases or suspended solids.

Molding machine of Mag Type: Ergotech 650-8000 system control: NC 4 year of construction: 1998 Clamping unit Clamping force t: 650 gap mm: 930 Min/max height mm: 450/950 injection unit Screw diameter mm: 110 Injection weight gr: 3930 Injection volume cm m³: 4372 Spray pressure bar: 1815 Miscellaneous 4 core pull 2 pumping sytems

WAUKESHA UNIVERSAL II (U2) model: 030-UII , capacity 8.2 m3/h output pressure 17.2 bar Waukesha Cherry-Burrell Universal 2 Series hygienic pumps with rotating pistons are characterized by reliability, gentle unpulsive pumping of products with a wide range of viscosities. The special rotor profile and fixed cross-section of the working chamber ensure no pulsation, no turbulence and gentle pressing of the product without destroying the structure or desired solids. Unlike cam pumps, the Waukesha pump with rotating pistons has only rotor tolerances to the stationary body and pump cover. They used a special non-rubbing material of rotors, thanks to which it was possible to significantly reduce internal tolerances. In addition, the seal line is extended compared to ordinary pumps. As a result, reverse leakage is minimized even with low viscosity fluids and the pump runs smoothly  ...

Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction  ...

usable dimensions width: 700 mm height: 650 mm depth: 1100 mm rated voltage: 3/400 V, 50 Hz control voltage: 220 V AC 24 V DC total power: 250 KVA temperature under vacuum: 600 - 1350 C heating: rated power: 200 kW heating conductor: graphite pumping rate: booster pump: 250 m3/h roots pump: 2050 m3/h oil quenching: bath volume: approx. 5,0 m3

The syrup room is designed to mix sugar with water to a given concentration of the resulting Brix of syrup, heat treatment of the syrup, in order to increase biological resistance. Capacity: until 10 t/h Operating mode: automatic Registration of mixing, pasteurization process parameters Automatic control of temperature, flow, pressure Touch control panels Memory configuration The choice of settings for different operating modes Syrup room consists of: sugar loading into the system unit mixing tank I hot water preparation unit for syrup with distribution panel I filtration unit buffer tank pasteurizer blending tanks with pumping station distribution panel II tank for mixing components cabinet for system control with touch control panel

Re circulation pump, used Horizontal type NPR 500 system KÖSTER Manufacturer Ritz Atro Built in 1992 Temperature of pumped liquid of 40 ° C Flow 240 l / s Pumping height 1.00 m Power 3 kW Pump speed 480 min Direction of rotation of the impeller left TMU submersible motor drive type Performance of the drive machine 4 kW Installation type horizontal Sufenzahl 1 Axial impeller shape Number of propeller blades 5 adjustable More info and photos on request.

various small paddle puller for waste sorting of cutting goods by a conveyor belt. Driven by an electric motor. Pumping height approx. 1.000 mm, adjustable. Very powerful, up to 80 cycles/min

Manufacturer: VARIAN TYp: VHS-6 Operaring range 1.5x10-3 x 5x10-9 Torr Pumping speed : 2400 l/sec Technical data to be seen in the pictures! Number: 14 stueck ; ready for use

Manufacturer: Knauer Year of construction: 2017 Tilting device: Hywema KV 12 Location: Kaiserslautern External dimensions: approx. 2668 x 2140 x 4752 mm Width feeder: 2.25 m Width: Output: 1.95 m Nominal voltage tilting device: 400 V Rated power tilting device: 2.2 kW Motor/pumping hydraulic system: 5.8 l/min; 160 bar; 1.5 kW; 1445 rpm Payload travel trolley: 4000 kg Payload tilting device: 1250 kg Payload vibrating channel: 250 kg/m² Weight of carriage: 2550 kg Weight tilting device: 1450 kg Weight vibrating channel: 1650 kg Mounting: Attachment to the hall floor The conveyor system served as a feed to a continuous washing system in an automotive plant. We will be happy to send you further information and pictures on request!

Pumping station for external system cooling, specifically for LEYBOLD sputtering systems H 3200 the sputtering is one other offer on ebay offered and is not included in this offer the facility had not made it to production, is as good as new

Manufacturer: APD Tip: 12 SC Pumping speed 3600 l/s Capacity 5x10-6 Torr Ideal for high vacuum Number: 11 pcs ; ready for use

Nozzle tube system(s) three-dimensional Basket diameter 600 mm Basket load 100 kg Usable internal height 370 mm incl. accessories for CE certification: - Direct drive for the washing basket - Weekly timer - Water deficiency protection - Chip/particulate filter with bath cover plate - Vapour extraction Automatic level replenishment: - automatic level supplementation Function blowing off / drying: Pulse compressed air blow-off three-dimensionally Lye care: Disc oil skimmer – discontinuous oil discharge – For floating/demulsifying oils Bag filter system type Sʺ With 2 pieces of pressure gauge on the bag filter housing ʺAfterʺ Filtration Emptying and cleaning the system (occupational health and safety): Pumping device/flushing of the tank bottom Hose/nozzle in aluminium/plastic Option – AM execution: AM version for additional manual cleaning (high ...

Curing injector Fomaco FGM 48F SC BLP M3 Injector Tenderizer FGM48FSCBLPM3 + belt filter CBF 500, used Type: FGM 48F SC BLP M3 manufacturer: Fomaco A/S, Denmark (fomaco.com) Year of construction: 2015 Flexible injector tenderizer for meat, poultry or fish industry. Good condition, previous use in the field of fish. The M3 is a series of thoroughly tested, high-quality production machines designed for use in demanding and aggressive production environments. The "box-in-box" construction seals and protects critical electrical components and controls from the ingress of water, moisture and weathering. By using state-of-the-art pumping systems, dead zones and low-flow areas are eliminated, resulting in a constant pressure and precise flow rate. The result is an even distribution of brine - regardless of product, type, size and number of needles. With the BLP quick release system,  ...

Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price

BRAIBANTI production line for pasta "Long cut" Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according ...

unused, new Kleenoil filter system for workshop use Type S6-103 Year of construction 2023 Execution: Mobile oil filter system Steel construction, powder-coated 6 ultra-fine filter units SDU-H8 incl. 6 filter elements SDFC with the option of use 1 x 6 or 2 x 3 Filtration capacity (average) 500 l/h (40 cSt) For oil quantities up to 10,000 l Self-priming gear pump Pre-filter unit with washable filter cartridge Automatic low-pressure shutdown Pressure gauge display Component protection IP55 Transfer function - oil pumping without filtration 6 m suction and return hose with quick couplings Starting viscosity: max. 1,000 cSt. Filtration viscosity: < 200 cSt.

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Vacuum pump Magnetic suspended compound nuclear pump Manufacturer: Osaka Type: TG 2003M Pumping speed: 200 l/s

Format Range: max. 1650 mm min. 275 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS X-tend 8 channel with 4 nozzles, Disc gluing unit link with re-pumping device, electronic Overtaking fold with servos, feeder with vacuum, primary crusher left, Kickers, counters, digital position indicators, pressing device after folding, motorized threading station, Jagenberg DBS 01 control, Fully automatic format setting Jagset II, corrugated cardboard package , 3 x alignment with the press belt, pneumatic, clocked press belt. Press belt extension, video surveillance tray, cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running, by arrangement.

Post of 9 stueck submersible pumps and dirty water pumps Manufacturer: Heath Pumps Pumpex (Sweden) Flygt Spt Soendgerath Power ratings from 1.5kw to 6.5kw Pumping capacities up to 120m3/h Foerderhoehe up to 80m Various controls for pumps also with operating hour counter, with float switch or with level monitoring New price of a large pump 4,500.-EUR The pumps were in use for a maximum of 3 years and have been stored ever since. Special price

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

Fristam pumps type FP 752/250 VA, power 22 kW pressure version. Pumping height 130 m, capacity 15,000 litres. Double shaft seal. Year 2012

Supply and removal automatic system of cubic and round small parts, conveyor belt and slide. Currently 130 mm part length Pumping height approx. 118 mm Weight 250 kg

TECNinox fermenter/bioreactor Year of construction: 2015 Suitable for R&D, small batch production, pilot plant. Box of manuals included. Characteristics: Fermenter head without sharp edges to improve cleaning, GMP gasket; with TC connections of various sizes (3/4, ½, 1), usable for additions, feeding, inoculation, etc. Fermenter geometry: 3:1 Operational pressure range: -0.01 to 3. 00 bar g Double mechanical seal Impellers 3 Rushton / 3 Pitched Blade Configurable motor speed: 50-1500 rpm Motor position: overhead motor shaft, as close as possible to sparger and bottom Toroidal sparger with possibility of coupling and uncoupling Exhaust gas condenser Integrated CIP system Working volume for 36L bioreactor: 20L, Minimum working volume 7.5L (positioning holder for probes) Working volume for 74L bioreactor: 50L, dependent on position of last impeller Exhaust gas managem ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 15 mm Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output -  ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Beam on: 29.712 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 20 mm Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assem ...

vacuum pump Manufacturer: Rieetschle Type: TR 40 V (91) Year of construction: 1988 Pumping speed: 45 m³/h (water) very good condition with vacuum regulator valve three items in stock with operating instructions LWH: 500 x 350 x 500 mm

Techn Data Product type: Wing cell pump Manufacturer: Alcatel / Adixen Condition: used Entrance: KF25 Exhaust: KF25 Engine: 1 phase, 115 / 208-230 V, 50/60 Hz Oil: Hydrocarbon Pumping speed: 16 CFM (60 Hz) Final vacuum: 7.5 x 10 & supmin; & sup5; Torr Weight: about 25Kg Mistakes not ruled out