135,702 used machines on RESALE, but how to find them? Machine Search
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Puma WP 1000 D2 Status: used, tested A complete recovery can be offered as an alternative. Then with 12 months of service to the geraet.; ready for use
Machine type: Vapormatt PUMA Manufacturer: Vapormatt In contrast to sandblasting, wet blasting, or VaporBlast, adds another element to the treatment: water. This optimizes the surface treatment and allows even smoother and more uniform surfaces to be achieved. The Vapormatt PUMA is a high-quality and versatile manual wet blasting booth from Vapormatt, which invented the wet blasting process in the 1950s. In over 70 years of further development in wet blasting, an ergonomic and economical system has been created, the Vapormatt PUMA. Small series parts can be processed by means of an insertable basket, and a clamping device for rims makes it possible to process them. Even large workpieces, weighing up to 50 kg, can be placed on the robust stainless steel mesh. The integrated circulating water supply ensures that consumables are used sparingly. Further technical information ca ...
Roots pump booster pump Manufacturer: Busch Type: Puma WP 1000 D2 Status: used, tested A complete overhaul can be offered as an alternative. Then with 12 months warranty on the device.; ready for operation
turning diameter: 750 mm turning length: 1520 mm control: Fanuc 18 iT-B total power requirement: 22,0 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy
MAX DIAMETER OF ROTATION: 750 MM MAX DIAMETER SWITCHABLE: 680 MM SWITCHABLE LENGTH: 1195 MM CNC: FANUC 18i-TB MAIN SPINDLE: MAX SPEED. OF ROTATION: 2800 RPM DIN 55026 8 ' ' CHUCK NOSE BAR PASS: 95 MM MOTOR POWER: 30 KW SELF-CENTRING DIAMETER: 315 MM Tailstock: POSITIONING STROKE: 1310 MM RACEWAY: 150 MM TUBE DIAMETER: 115 MM TORRETA TOOLHOLDER: MOTOR POWER: 10-17.5 KW TOOL DIMENSIONS: 25X25 MM BARENI DIA DIMENSIONS: 32-40 MM
The Treif Puma CE-F is a professional industrial meat slicing machine designed for high-volume meat processing operations. With a cutting performance of up to 400 cuts per minute, it delivers fast, accurate, and consistent portioning of various meat products. The machine is suitable for processing fresh, chilled, and slightly frozen products down to -4°C. Its robust construction and powerful drive system ensure reliable operation, high productivity, and excellent cutting precision. Technical Specifications: Manufacturer: Treif Model: Puma CE-F Type: Industrial Meat Slicer Cutting Capacity: Up to 400 cuts per minute Product Temperature: Down to -4°C Power Supply: 230/400 V, 50 Hz, 3 Phase Power Rating: 3.4 kW Current Consumption: 16 A Chamber Dimensions: 235 x 220 mm Machine Dimensions: 1870 x 880 x 1450 mm Weight: 285 kg Application: Slicing and portioning meat, steaks, ch ...
This 4-axis DN SOLUTIONS PUMA 2600Y II was manufactured in 2024. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a main spindle speed of 4,000 rpm and a turret with 12 tool stations. If you are looking to get high-quality turn-mill capabilities, consider the DN SOLUTIONS PUMA 2600Y II machine we have for sale. Contact us for further details.
CNC lathe Type: Puma GT 2100 Producer: Doosan Year: 9/2021 Control: Fanuc Hours: 1270 Max. turning diameter: 390 mm Max. turning length: 562 mm Spindle speed: 4500 rpm Spindle bore: 65 mm Main motor: 18.5 kW Tailstock Tool probe Chip conveyor Machine in very good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines
stroke: 70 mm work height max.: 1094 mm throat: 500 mm : 40 in 14 mm no. of strokes: 20 Hub/min throat: 500 mm : 80 to engine output: 9 kW range L-W-H: 1980x1150x2000 mm weight: 2000 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details.
description: 180 ° curve conveyor suitable for different tray formats. Belt width 800 mm Radius 1800 mm New-quality motor can be offered with the desired requirements width: 4450 mm length: 2500 mm serial number: 642-92-900 S176 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK techni ...
Horizontal turning machine manufactured in 1998. This DAEWOO Puma 350 LMA features a turning length of 2000 mm and a chuck diameter of 320 mm. It is equipped with a live tool and includes a steady rest. If you are looking to get high-quality turning capabilities, consider the DAEWOO Puma 350 LMA machine we have for sale. Contact us for further details.
used
Max Turning diameter 480 mm Max Turning lenght 790 mm Main spindle speed 2800 rpm Sub spindle speed 4500 rpm Main spindle power 22 kw With 4 pieces life tool
Used machine in good condition. Available for immediate delivery. - Number of tool stations: 4 - Spindle power : 15 kW - Spindle power : 5.5 kW - Cutting feed rate (X x Z): 205 x 580 mm / min - Max. spindle speed: 4.500 rpm - Weight: 4.500 - Dimensions (long x wide x high): 2.997 x 1.592 x 1.740 mm
turning diameter: 750 mm turning length: 1520 mm control: FANUC 18i TB turning diameter over slide: 540 mm chucking diameter: 8 spindle nose: A2 #6 spindle passage: 76 mm spindle turning speed - stepless: 5000 U/min spindle drive: 22/18,5 kW milling spindle: milling spindle drive: 18,5 /15 kW milling head speed: 12000 U/min x-axis: 565 mm z-axis: 1550 mm y-axis: +/- 85 mm b-axis: 0,001 ° total power requirement: 56,7 kVA weight of the machine ca.: 13,8 t dimensions of the machine ca.: 5,9 x 2,5 x 2,8 m Equipped with: - FANUC Series 18i TB CNC control - Main & counter spindle - IKZ 20 bar - Tool magazine with 40 spaces - 3-jaw chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used machine in good condition. Available for immediate delivery. - Number of tool stations: 4 - Spindle power : 15 kW - Spindle power : 5.5 kW - Cutting feed rate (X x Z): 205 x 580 mm / min - Max. spindle speed: 4.500 rpm - Weight: 4.500 - Dimensions (long x wide x high): 2.997 x 1.592 x 1.740 mm
Case Puma 160 4WD tractor, Technical specifications:, - Year of construction: 2014, - Operating hours: 9150h, Engine & Performance:, - Engine: 6-cylinder, 6.7l turbo diesel, - Engine power: 160 hp (119 kW), - Max. power: 203 hp (151 kW)
turning diameter over bed: 32 mm spindle turning speed range: 8000 U/min spindle passage: mm turning length: 320 mm Control: Fanuc 0i-TC total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,63 x 1,3 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 376 mm, 760 mm, 3500 1/min
Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic Tailstock.: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6000 kg
Key data: 376 mm, 760 mm, 3500 1/min
Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg
turning diameter over bed: 1030 mm turning diameter over slide rest: 800 mm turning length: 3200 mm turning diameter: 900 mm control: FANUC 31i B : 165 mm spindle cone: ASA A1-15 travel -x axis: 470 mm travel -z axis: 3235 mm rapid travel - longitudinal/face: 12 / 10 m/min Measuring Speed: 3 - 1500 1/min spindle drive: 45 / 37 kW max. workpiece weight between centres: 7300 kg max.workpiece weight:each extra steadyrest: 1600 kg tail stock: tailstock adjustment: 3135 mm tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm tailstock quill taper MT: 6 total power requirement: 64,44 kVA weight of the machine ca.: 22 t dimensions of the machine ca.: 7,36 x 2,77 x 2,78 m High-precision turning centre - 3-jaw chuck dia. 800 mm - FANUC 31iB CNC control - Tailstock - Hydraulic steady rest - 12-station tool turret (32 x 32 mm) - Chip conveyor - Coolant system - Tool setter - CE The da ...
Stroj je v dobrém technickém stavu, po předchozí dohodě možnost odzkoušení.
Fabricante DAEWOO Modelo PUMA 2000 SY Año 2003 CNC FANUC 18i – T Capacidades Diámetro máx. sobre bancada 600 mm. Diámetro máx. sobre carro 550 mm. Diámetro máx. torneable 330 mm. Longitud máx. torneable 510 mm. Recorridos y avances Recorrido Eje X 250 mm. Recorrido Eje Z 580 mm. Recorrido Eje Y 100 (±50) mm. Recorrido Eje B 580 mm. Avance Rápido eje X 20 m/min. Avance Rápido eje Z 24 m/min. Avance Rápido Y 7,5 m/min Avance Rápido B 20 m/min. Cabezal Eje C INCLUIDO Indexación eje C 0.001 º Paso de barra 76 mm Nariz A2#6 Velocidad 4.500 rpm. Potencia 15 kW Sub-cabezal Eje C INCLUIDO Indexación eje C 0.001º Paso de barra 45 mm Velocidad 6.000 rpm Potencia 7.5 kW Torreta y Herramientas motorizadas Numero de Posiciones Torreta 12 Dimensiones de la Herramienta 25 mm Tiempo de Indexación Torreta 0.1 s Velocidad Herramienta Motorizada 5 ...
Control Fanuc Max.workpiece diameter ... 800mm Table diameter ... 450mm Max. workpiece height ... 750mm Axis Z ... 780mm Number of positions in the tool changer ... 8 Axis X ... 390mm Axis Z ... 780mm Table speed ... 20-2000 rpm Main engine power ... 30/37kW Max. spindle torque ... 2243/2766Nm Machine weight ... 9000kg L x W x H ... 2000x2800x3300mm
Control: Siemens Sinumeric 828 D Turning length: 1,600 mm Turning diameter: 900 mm X axis travel: 470 mm Z axis travel: 1,650 mm Speed: 3 – 1,500 rpm Tool turret: 12 places (all driven) Tool holder: BMT 85P Equipment: Self-centering bezel Conveyor Touchsetter 3-jaw chuck Programmable tailstock Aspirator Coolant pump 20bar with cyclone filter Oil mist extraction
This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information.
turning diameter: 376 mm turning length: 760 mm control: FANUC I-Series Plus greates pass round over bed: 780 mm swing diameter over slide rest: 630 mm max. turning diameter: 376 mm spindle turning speed range: 4000 U/min spindle drive motor: 22 / 15 kW spindle nose: ASA A2-8 spindle bore: 81 mm bar material dia.: 76 mm c-axis: 0,001 ° chucking diameter: 255 mm Number of tools: 12 St. travel -x axis: 260 (72 + 188 ) mm travel -z axis: 830 mm travel -y axis: 105 (+/- 52,5) mm diameter of quill: 100 mm quill stroke: 100 mm tailstock taper MT: MT 5 total power requirement: 41,98 kVA weight of the machine ca.: 6,1 t dimensions of the machine ca.: 4,0 x 2,5 x 2,2 m CNC control FFANUC I-Series Plus - chip conveyor - driventools 5000U/min, 7,5kW - C-axis - hydraulic unit - tailstock - coolant 7 bar - bar loader interface Capto C3 straight chair: 2 Capto C3 90° chair: 1 ER20 Capto chuck: 10 ER ...
This DOOSAN PUMA 240B was manufactured in 2008. A robust horizontal turning machine featuring a 4500 rpm spindle speed and a 12-tool turret for efficient operations. Equipped with Fanuc Control and main dimensions of X242 mm and Z580 mm. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA 240B machine we have for sale. Contact us for more information.
control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This DOOSAN PUMA GT2100 was manufactured in 2015. A robust horizontal turning machine featuring a main 8 inch chuck, X242 mm and Z580 mm travel, and a 4500 rpm spindle speed. It holds up to 12 tools on the turret. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA GT2100 machine we have for sale. Contact us for more information.
CNC lathe, year 2003, CNC i Series. Used machine in good condition. More info & price on IndustrialBuyer.
This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for sale.Contact us for more information.
This DOOSAN PUMA 240B was manufactured in 2005. A robust horizontal turning machine featuring a 4500 rpm spindle and a 12-tool turret. Ideal for precision machining tasks. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA 240B machine we have for sale. Contact us for more information.
turning diameter: 420 mm turning length: 1350 mm spindle passage: 101 mm control: Siemens SL 828D ShopTurn number of controlled axis: 4 turning speed range: 3000 U/min power requirement: 22/18,5 kW rapid speed: 30 m/min number of tapers in turret head: 12/24 BMT 65 number of driven tools in turret: 12 BMT 65 Spindel speed of driven tools: 5000 U/min Spindelpower on driven tool: 7,5/5,5 kW y-axis: +/- 65 mm tail stock: MT-5 weight: 8,0 t dimensions: 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour ...
This 3-axis DOOSAN PUMA 3050 LM lathe was manufactured in 2024. It features a robust 12-position BMT55 Servo Power Turret, a powerful main spindle motor at 18.5/15 kW, a spindle speed of 3.000 rpm, and a milling spindle speed of 5000 rpm. The machine includes a 12 hydraulic chuck, chip conveyor, and a FANUC - 0iPLUS control system. Ideal for precision, the DOOSAN PUMA 3050 LM machine we have for sale represents a significant opportunity. Contact us for further details regarding this turning machine.
This DOOSAN PUMA 215 turning machine was manufactured in 2011. It features a swing over bed of 510mm, a workpiece diameter of 270mm, and a length capacity of 522mm. Equipped with a DOOSAN FANUC i Series CNC system, it offers rapid traverses of 16 m/min in X and 20 m/min in Z. A great opportunity to buy this DOOSAN PUMA 215 turning machine. Contact us for further details regarding this vertical turning machine.
- Tool eye - SMW 3 chuck 630-165 mm - SMW Steady rest 85 - 350 mm - LNS Chip conveyor - DORMATEC Air Filter 30 m3
This 5-axis DAEWOO PUMA 2000 SY turn-mill centre was manufactured in 2003. It features a max turning diameter of 330 mm, length of 510 mm, and rapid feeds up to 24,000 mm/min. Includes main and sub-spindle capabilities, both with C-axis, and a 12-station turret with live tooling. Consider the opportunity to buy this DAEWOO PUMA 2000 SY turn-mill centre. Contact us for more information about this machine.
CONTROLS CNC controls FANUC 31I MODEL A BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes number of c-axes: 2 number of y-axes: 1 WORKING RANGE TURNING turning diameter (max): 230 mm worpiece length max.: 700 mm MAIN SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 5000 /min c-axis: yes COUNTER SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 6000 /min c-axis: yes X/Z SLIDE tool fixture: Turret ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2800 mm space requirements -front/back-: 1630 mm total height: 2200 mm total weight approx.: 9000 kg ATTACHMENTS (TURNING) chip conveyor: yes coolant unit: yes band filtration unit: yes coolant through ...
This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, its ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine.
This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details.
This DOOSAN PUMA 300 C horizontal turning machine was manufactured in 2006. It features a 12-inch chuck, a maximum turning diameter of 350 mm, and a maximum turning length of 760 mm. The spindle supports a speed of up to 3,500 rpm with a bar capacity of 76 mm. Ideal for precision turning, it also includes a servo indexing tool post with 12 tools. Contact us for more information about this machine.
This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information.
Key data: 700 mm, 5050 mm
CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation
This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
