pulse used for sale

North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.

GBS test pulse rev3 pulse generator for long-term insulation tests The test pulse structure is intended for long-term insulation tests on test specimens of up to 6 nF capacity. Inverter for high-voltage test transformer · Internal sine wave generator: 50-200Hz. · Pulse width modulation 16-24kHz of the sine over full bridge. · Inverter voltage 0-600V adjustable, Imax=2.6A, maximum power 1.3kW · Pulse current limit 110A (cut-off threshold) Pulse transformer – control · Control via full bridge · Full bridge power supply adjustable 0-1000V, 1.3A max. · Pulse current limit 100A (cut-off threshold). · Pulse width 20-120μs, nominal 94μs, adjustable · 2 selectable series inductors 150μH, 300μH to adjust the pulse width or rise times to load capacitance and voltage. · Pulse repetition rate 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable positive, negati ...

Inert gas welding machine with pulse function, pulse arc welding system, MIG / MAG pulse welding system -with: 3 hose packages -Max. Welding power: 330 A -Remote control connection -4 roller drive -Water-cooled -with: removable wire feeder -Incl. Ground cable -Gas valve -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Pulse generator, handwheel, CNC control -Manufacturer: Fujitsu Fanuc, Pulse Generator -Type: A860-0200-T021 -Quantity: 2x Pulse Generator available -Price per piece -Dimensions: 122/122/H136 mm /140/120/H120 mm -Weight: 1.1 kg/pc.

Pneumatic pulse valve, solenoid pulse valve, 3/2-way, directional control valve AIRTEC P 05 320 Nominal diameter: 6 mm Flow: 750 l/min Operating pressure: 0 - 10 bar Control pressure: 2 - 10 bar Connections: G 1/8 New ! Dimensions: 78 x 40 x 25 mm

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP6PTX32 HR10-AT Ergo Pulse 8431 0375 22 Torque range: 16 - 32 Nm Operating pressure: 6.3 bar Tool holder: 3/8 New ! with operating instructions ! Dimensions (screwdriver only): 205 x 200 x 60 mm

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP7PTX55 HR10-AT Ergo Pulse 8431 0375 32 torque range: 30 - 55 Nm Operating pressure: 6.3 bar Tool holder: 3/8 New ! with operating instructions ! Dimensions (screwdriver only): 200 x 180 x 55 mm

Pulse wrench, pneumatic screwdriver ATLAS COPCO EP11PTX110 HR13-AT Ergo Pulse 8431 0376 52 torque range: 70 - 110 Nm Operating pressure: 6.3 bar Tool holder: 1/2 used, tested ! with operating instructions ! Dimensions (screwdriver only): 205 x 200 x 60 mm

Sell a High Power Pulse Generator, the Cober brand. Model 606P The device is used and comes from a site shutdown, from the field of laboratory workshop. Device is unchecked as we have no knowledge of the operating system.

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 354 KW Plant No. 126.411 Connection voltage 3 x 400 Volt Setting range 25 – 350 amps Duty cycle 40 % ED at 350 amps 60% ED at 280 amps 100% ED at 250 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,000 x 400 x 1,000 mm Weight 65 kg Age 12 months Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of welder gloves with gausty 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 1 piece i ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 454 DW Series No. 109.129 Connection voltage 3 x 400 Volt Setting range 20 – 450 amps Duty cycle 50 % ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,100 x 490 x 1,200 mm Weight 140 kg Special accessories Rotary connection on the DV case, filter attachment Control panel in the DV box, wheels on the DV case, Control panel cover flap Age 5 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable ...

Machine type Pulse-Arc inverter welding system Brand EWM Type Phoenix 300 Expert Supply voltage 3 x 400 volts Adjustment range 5 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 220 amps 100% ED at 170 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 1,000 x 480 x 1,100 mm Weight 65 kg Age approx. 10 years Condition workshop-tested very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of welding gloves with cuff 1 piece spare parts box kpl. Equipped 1 can non-stick spray ME 4000 1 piece instruction manual Warranty 6 mont ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Pulse generator, synchronous motor actuated SCHLEICHER IPB1 8 s 42 V AC 50 Hz max. Breaking capacity: 6 A, 380 V AC, 0.5 kW Series voltage: 380 V AC used ! Dimensions: 70 x700 x 110 mm

Pulse Coder FANUC alpha A64 ( alphaA64 ) A860-0360-V501 Flange: Ø 83 mm New ! Dimensions: 90 x 90 x 45 mm

Pulse Counter, Electromechanical Counter IVO F 504 ( F504 ) max. 10 pulses / sec 24 V AC unused ! Dimensions: 90 x 50 x 25 mm

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Solenoid pulse valve, solenoid valve FESTO JMC-4-1/4 2136 Operating pressure: 2 - 10 bar Control voltage : 2x 24 V DC New ! Dimensions: 92 x 80 x 120 mm

Rotary pulse encoder, rotary encoder with solid shaft -Manufacturer: Klaschka -Type: DIE/L-1.2-400 -Tension -Dimensions: 160/135/H90 mm -Weight: 0.8 kg

Pulse valve, directional control valve, solenoid valve BÜRKERT 0205-A-2,5-NBA-MS 00134029 flange: 32 x 32 mm Pn: 0 - 8 bar 230 V AC 50 - 60 Hz 8 W Material: Brass, NBA New ! Dimensions: 57 x 32 x 51 mm

Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 400 A -with pulse function -4-roller drive -Water-cooled -Incl. Ground cable -with: detachable wire feeder -Gas fitting - Hose package 4 m -Number: 1x device available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Signal tower WERMA SIGNALTECHNIK LED continuous luminaire 24VAC/DC RD Article number: 843 100 55 Buzzer element continuous/pulse 24VAC/DC B article number: 844 118 55 connection element BWM 12-230VAC/DC BK article number: 840 085 00 bracket for wall mounting BK article number: 960 000 02 Operating voltage: 24 V AC / DC Degree of protection: IP54 New ! Dimensions: 220 x 85 x 70 mm

Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 800 A -with pulse function -4-roller drive -Water cooled -Incl. Ground cable -with: removable wire feeder -Gas fitting -Hose package 4 m -Quantity: 1x device available -Dimensions: 500/1010/H1600 mm -Weight: 162kg

Description: 10 pulse counters 24 volt DC version 2 watts maximum 10 imp/s maximum counter 999999 Approx. Onsite Dimension. (l x w x h): 250 x 200 x 70 mm, weight approx.: 1 kg

; ready for use

Manufacturer: Huettinger, Model: DC-DC Generator PFG 10000, for sputtering, metal coating Voltage: 3x400V, Power: 3x24A, Frequency: 50 / 60Hz Power: 10.000W, Stock: 5 pieces; ready for use

Transient Multifunktions-Test-Generator Modul CDM 3041-C Modul PQM 3403 Last calibration 7.7.2021 Dimensions 449 (17.7”) x 226 (8.9”; 5 HU) x 565 mm (22.2”) (W x H x D) Weight approx. 29 kg (64 lbs) Display Interface 7 touch-screen USB Input Yes Price excl. VAT (#7660).

Magnetizing device Magnet physics MF-RI8 Item condition: New without OVP The goods originate from a plant closure in the automotive industry and were temporarily stored in paternosters. Storage traces possible. R12B1_EK More products of this category can be found in our extensive EBAY assortment. More magnetizers - new and used - can be found in our shop! International shipping costs on request!

Absolute encoder, incremental encoder with solid shaft -Type: DIDL-105z10-1SR1-100IMP -U: 10...24...30 VDC -Imax: 100 mA -Weight: 0.6 kg

Handwheel JAKOB Impulses per revolution: 100 Flange: 108 x 108 mm spare part for Toyoda HES52 ! used, tested ! Dimensions: 110 x 110 x 120 mm

Sample mixer PAGUS 500 pulses / min operating voltage: 220 V 1AC 50 Hz diameter sample container: Ø 39 mm operating modes: continuous operation, operation with timer ( max. 60 min ), operation with counter geared motor: VEM, ELMO HARTHA Type 1308.2/3 0.75 A 250 rpm 220 V 1AC 50 Hz Counter: UEK 124/15-2 approx. 1.2 m connection cable used, tested ! Dimensions: 350 x 250 x 280 mm

Absolute encoder, incremental encoder with solid shaft -Manufacturer: Lenord Bauer -Type: GEL 260-VN00500A000 -Dimensions: 90/90/H120 mm -Weight: 0.62 kg

offer 22686 Specifications: - Welding current 300 A 40% ED - 240 A 60% ED - 180 A 100% ED - Welding current adjustable 10 A - 300 A - Digital volt + ampere display - 4 roller wire feed infinitely adjustable - 2 stroke - 4 stroke - regulation - Eco Pulse Front Panel with various welding settings - water-cooled hose package approx. 4 running meters - Ground cable -Reducer - Water chiller unit - Connection 400 V / 32 A / 18 kVA - Space requirement approx. W 450 x H 1200 x D 1050 mm - Weight approx. 80 kg

Philips c.arm PULSERA CE mark / manf.2008 BIG Image Instensifier 17-23-31cm SW.1.8.1 / BV FAm. 1.2 # NEW BATTERY PACKAGE # 2x flat LCD Monitor´s Sony Printer / manuals - Full software option ́s - Welcome to inspect & test exw Germany

An annual (bought new in 2021) ESAB migomat for sale. We sell due to the liquidation of the production workshop. A great, almost new machine, used by us for welding aluminum and steel sheets and sections. The machine is designed for an intensive work cycle - for work that requires long operation. The device is complete (with a handle - 1 pc, coolant, mass cable, etc. - without gas cylinder), ready to work. Possibility to see / check.

General SKU235P239 LocationBarneveld MakeQVF Engineering GmbH TypePulsierte Siebbodenextraktionskolonne DN 150 No.7989 Year of construction1998 Pressure Working pressure0.9 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume210 Ltr. Motor1.5 KW Specified Features - Extraction Extractorcheck Capacity245 Ltr Diameter168,3 mm Length6000 mm Max. temperature100 degr.C. Motor1,5 kW 500 Volt Ex MaterialStainless steel 1.4571 (316Ti) Information Floorspace8,7x0,8 M Total height0,8 M Weight900 KG Extra SpecificationsSystem consists of extraction column DN150 and pulsation head DN100 (max stroke 60 mm, 0,29 DM³ 0-150 rpm) :ExtractionQVF GlasstechnikColumns > ExtractionBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Yo ...

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

Merkle Insquare 300 AC/DC welding system Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A TIG AC Range: Open circuit voltage: 80 V Working voltage: 10-22.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A (40°C) Continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary Maximum current: 19 A Electrode welding operation: Rod electrodes: 1.5-6 mm Open circuit voltage: 80 V Working voltage: 20-32.8V Welding current: 5-320 A HSB 60 % d.c. (10 min.) 320 A HSB 80 % d.c. (10 min.) 300 A DB 100 % DC: 260 A  ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Laser cutting system make LSS LASER LAB type CONTOUR 3015/ 020 SLABTechnical specifications:Cutting area: 3000 x 1500 mmLaser source :Rofin-Sinar Laser DC 020- Output Power Range / Guaranteed:200 - 2000 W/ 2000 W- Performance stability:+- 2% (24h)- Laser beam quality Drm. : < 25mm- Beam index: K > 0.8- Pulse generator, pulse frequency: 0 or 8 - 5000 Hz Pulse Width: 26ms-CW- Laser gas: Rofin-Sinar special premix Consumption: < 0.3 Nl/hCutting capacity (according to the LSS company) approx. :10 - 12 mmRapid traverse: 10 m/min.programmable Z axis: 175 mmHigh-pressure cutting up to:20 barBeam data: 10.6 kgBeam quality: 20 - 25 mm K09Directional Stability: 0.15 mrad.Polarization linear:45°Pulse characteristics: 2 - 5000 HzLaser gas: 0.15 NL/h.Laser head dimensions: 1700 x 800 x 853 mmWeight laser head approx.: 500 kgDimensions control cabinet: 800 x 600 x 1900 mmWeight control cabinet approx ...

GeneralTurning-milling centre; Control: Fanuc 31iB5 CharacteristicsSwing- Ø, max.1070 mmDrive power milling spindle22 kWDrive power second spindle22 kWDrive power main spindle22 kWNumber of Toolmagazine positions50 Speed max.8000 rpmSlewability of B-Axis1 degreeMovements X / Z / Y1040/+-330/3150 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,0001 degreeBar diametre164 mmSpindle speed 2nd Spindle max.1500 rpmInput precision of C-axis on Mainspindle0,0001 degreeBar diametre164 mmSpeed max.1500 rpmMax. Turning Length3076 mmMax machining diameter1070 mmWeight approx.46000 KgTool spindle full indexing specificationsErhöhung der mögl. Indexierung der B-Achse auf 0,0001º Einrichtung zur Positionierung der B-Achse mit einem minimalen Winkel von 0,0001º anstelle der Standardausführung mit 1º, einschließlich der Option Direktes Wegmesssystem in der B-Achse derSp ...

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Laser welder TRUMPF HAAS-LASER HL 124P/4 LCB built in 1997 by the HAAS-LASER Schramberg brand (now TRUMPF) in Germany. Technical specifications : - control: LCB - maximum output power: 150 W - laser power: 150 W - maximum pulse power: 5 kW - pulse energy: 0.1-50 J - pulse duration: 0.3-20 ms - optical fiber: 400 ?m The TRUMPF HL 124P/4 LCB laser allows following treatments: - welding tools, injection molds, inserts, punches, sliders, sleeves, etc. - welding bathroom accessories - welding surgical instruments, prostheses, implants and parts of endoscopes - welding automotive components The laser welding machine allows welding of elements made of the following materials: - tool steels - cast iron - aluminum alloys - bronze feet - titanium alloys