pu foam used for sale

Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover -Lid: 345 x 340 mm / Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 piece available -Transport dimensions: 345/340/H60 mm -Weight: 2.8 kg

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 260 mm, unused -Groove width: 24 mm -Hole: Ø 50 x 45 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 260 x 45 mm -Weight: 6.6 kg/pc.

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 420 mm -Item No.: 829676.44-01 -Groove width: 37 mm -Hole: Ø 70 x 55 mm -Quantity: 1x pulley available -Dimensions: Ø 420 x 50 mm -Weight: 20.1 kg

Reference Num.: 3657 Brand: Beil Type: 780/425-S-H-AP Construction year: 1999 Available: directly Status: Not in production Location: Deutschland

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units, drilling and sinking 5 units, drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units, drilling and sinking 3 units, drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 330 mm -Groove width: 32 mm -Hole: Ø 110 x 45 mm -Quantity: 1x pulley available -Dimensions: Ø 330 x 45 mm -Weight: 18.2 kg/pc.

Hydraulic balancing act with cooling and tank (0.70 cbm) Motor 37 kW, filter, pressure vessel, etc...

DEPA Compressed Air Diaphragm Pump Manufacturer: Alfa-Laval Type: DL40-UL-T-T Item #: 09855 Year of construction: 1999 LBH: 350 x 460 x 700 mm

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz Like-new (1-year-old) high-pressure pump 69 bar

3 × Hughes HPS 2200 High Pressure Pumps 320 bar – 228 l/min, used For sale are three used Hughes HPS 2200 high-pressure pumps in 100% working condition. The pumps were only taken out of service because the associated diesel engines and controls were needed for another project. Technical data Manufacturer: Hughes Pumps Ltd. (England) Model: HPS 2200 Max. operating pressure: 320 bar Flow rate: 228 l/min Pump speed: 400 rpm Input speed: 1,800 rpm Gear ratio: 4.50 : 1 Transmission oil: EP90 Oil capacity: 18 litres Years of construction 2 × built in 2010 (yellow pumps) 1 × built in 2009 (blue pump) ✔ 100% functional condition The operating hours cannot be specified because the original diesel engines and controls were already dismantled before storage. The pumps are suitable for a wide range of industrial applications, including water pumping, mining, mari ...

Vacuum pump Manufacturer: LEMA 25 AZ FAA OA O Item #: D-3402461 LBH: 350 x 180 x 220 mm

Vacuum pump Manufacturer: Busch Type: SV 1040 C 000 10XX Item #: 00445000075 Final pressure: 120 mbar Power: 1.25 kW

Vacuum pump Manufacturer: Grundfos Type: CH12-30 A-W-A-CVBV LBH: 400 x 180 x 240 mm

Centrifugal pump Manufacturer: Fristam Type: FP7028 Item #: 02130032 Power: 0.25 kW LBH: 450 x 180 x 300

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 5-groove pulley type SPB -V-belt width: 17 mm -Receiver: Taper bushing Ø 55 x 45 mm -Dimensions: Ø 178 x 80 mm -Weight: 7.9 kg

Centrifugal pump Manufacturer: Fristam Type: FP712C Item #: 414433417 Power: 1.1 kW Speed: 2880 rpm LBH: 530 x 270 x 430 mm

Vacuum pump Manufacturer: Busch Type: RC 0025 E 501 Item #: 02006242 Pressure: 20 mbar Power: 0.75 kW LBH: 560 x 310 x 420 mm

Centrifugal pump Manufacturer: Siemen & Hinsch Type: AKHE 1202 Item #: BN 08424 Power: 1.75/0.8 kW LBH: 880 x 500 x 1050 mm 2 copies in stock

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPB -V-belt width: 17 mm -Hole: Ø 60 x 70 mm -Dimensions: Ø 230 x 82 mm -Weight: 9.7 kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPB -V-belt width: 17 mm -Hole: Ø 30 x 62 mm -Dimensions: Ø 135 x 90 mm -Weight: 4.2 kg

Keeldiepte: 405 mm slag: 21 mm 55 slagen per minuut Punching pressure: 45 ton Max punching dia: Ø 27 in 13 mm / Ø 39 in 9 mm Power needed: 2,2 kW Length: 1300 mm Depth: 800 mm Height: 2050 mm Weight: 1000 kg

Pump Manufacturer: AL-KO Geräte GmbH Type: HW A 1001 INOX Item #: 112 461 Flow rate: 4 m³/h LBH: 380 x 230 x 480 mm

Water pump, make Wilo, type: IL-E80/8-40-BF-R1, dry rotor pump with frequency converter, approx. 160 m³/h, 8-40 m head, 15 kW, 2915 1/min revolutions, nominal pressure 16 bar, YOC 2007

Centrifugal pump Manufacturer: AEG Year of construction: 1992 Power: 7.5 kW Speed: 2900 rpm LBH: 680 x 320 x 300 mm

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...

FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...

Centrifugal pump Manufacturer: Hilge Type: Hygia SII/10B No.: HS2 10B 69 4553 Power: 3 hp with spare part LBH: 650 x 400 x 350 mm

Centrifugal pump Manufacturer: Hilge Type: Hygia II/30C Power: 11 kW Speed: 2930 rpm LBH: 650 x 400 x 410 mm

Centrifugal pump Manufacturer: Hilge Type: NDC 40-200/5.5/2 No.: 034-05-003880 Power: 5.5/6.3 kW LWH: 630 x 300 x 300 mm

Injection pump overhauled 746673-51203

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Capacity: 3000 l/min -Pump length: 970 mm -Flange outer diameter: 245 mm -Flange inner diameter: 125 mm -Pump diameter: 210 mm -Weight: 180 kg

Viesse pump RB316BGT with electric motor recon Ball bearings renewed from rotor The pump was overhauled with the following new parts: - Impeller - Mechanical seal - Gasket set - Valve flap

SECOND-HAND MEMBRANE PUMP REF#: C6349 Second-hand diaphragm pump

Separating tool, punching tool, punch, punch die, punch stamp, stripper -Manufacturer: Mubea, scraper 4 pieces -Size: 10/15/30/40 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, die-cutting tool intermediate block -Dimensions: see photos -Dimensions: 310/17/H110 mm -Weight: 22.6 kg

Drängeltisch, Storage table used Manufacturer: POLEYKETTING Year of construction: 2015 Total dimensions approx. 11 x 2.8 x 1.6 m The plant comes from a plant where canned food was produced. We also have the appropriate conveyor belts. Changes and errors in the technical data, information and prices as well as prior sale reserved

USED TITANIUM CENTRIFUGAL PUMP REF.: C5811

Separating tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, die-cutting tool for holding dies -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm -Weight: 6.8 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Mubea, die-cutting tool for holding dies -Hole: Ø 35 mm -Dimensions: see photos -Dimensions: 235/105/H130 mm -Weight: 11.1 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg

Progressing cavity pump for separator feeding, original pump housing available - was built into a special pump housing, functional due to project change dismantled: Flow rate: approx. 20 m³/h Drive power: 7.5 kW

30 ton 1250 x 2500mm

1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW

Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!