psi used for sale

Matrix printer, continuous paper printer Manufacturer: PSi Type: PP405 Year of construction: 2011 Fully functional Voltage: 220V There are a total of 8 pieces. The price is for 1 piece All information without guarantee

Computer, board computer, organizer -Type: Organizer 2 Compilot 400 -Number: 2x organizers available -Price: per piece -Weight: 0.8 kg

Pressure Transmitters, Pressure Transducers, Pressure Transducers DRUCK Limited, FRÖHLICH PDCR 4010 ( PDCR4010 ) Measuring range: 1 psi ( 0,) 069 bar ) U(supply): 10 V DC thread: 1/4 ( inch ), length: 10 mm approx. 0.6 m connection cable Material: stainless steel ( housing ) New, with pads ! Dimensions ( pressure transmitter, without cable ): 50 x 25 x 25 mm Dimensions ( packaging ): 200 x 200 x 30 mm

Pressure transmitters, pressure transducers, pressure transmitters DRUCK Limited, FRÖHLICH PDCR 4010 ( PDCR4010 ) range: 5 psi ( 0,) 345 bar ) U(supply): 10 V DC thread: 1/4 ( inch ), length: 10 mm approx. 0.6 m connection cable Material: Stainless steel ( housing ) New, with pads ! Dimensions ( pressure transmitter, without cable ): 50 x 25 x 25 mm Dimensions ( packaging ): 200 x 200 x 30 mm

Stock number: 3290 INDUCTIONS HEATER Manufacturer: FAG, type: HEATER PSI 24-400 Machine no.: 10167, year of construction: 2011 Specifications: Automatic residual magnetism Max. 28 kVA

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve -Manufacturer: Superior, pressure relief valve, unused original packaging -Type: 3220-360/360 PSI -Dimension box: 105/50/H50 mm -Weight: 0.3 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: PSI-MOS-DNET CAN/FO 850/BM -Price: per piece -Number: 59 pieces -Dimensions: 100/23/H110 mm -Weight: 0.2 kg/piece

Available in stock 1 x Used GrimmerSchmidt Compressor. The compressor was installed in a biogas valorization plant that stopped working. Now the equipment is stored in our warehouse. The equipment is used but in good working conditions. RPM: 6600 RPM Flow: 30 CFM Rating: 80 psig Main Motor Voltage: 460 / 380 V Main Motor Frequency: 50 Hz Main Motor Horsepower: 7.5 hp

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws with plastic insert -Span width: 10 to 25 mm -Load capacity: 1,000 kg -Number: 1x terminals available -Price: per piece -Weight: 20 kg/piece

SUPERCRITICAL CO2 EXTRACTOR Model: EXTRAKTLAB 140 Refurbished in 2021 (to brand new equivalent condition) Processes up to 8 kg of input material per hour depending on process conditions. Extraction vessels: 2 x 20 L Collection vessels: 3 x 2,5 L Recycler vessels: 1 x 20 L CO2 Pump Flow Rates Range (LPM): 1.5 to 2 LPM Max Operating Pressure (psi): 5000 psi, 344.74 bar Maximum Process Temperature: 90°C Skid Operating Temperature (C°): 5 to 40°C (15 to 30°C optimal) CO2 Solvent Inlet Lines: 1 Eluent Inlet Lines: up to 2 User Interface: Touch Screen HMI panel with barcode scanner, maintenance tracking, recipe storage (parameter). 21 CFR Part 11 compliant software. Biomass Loading and Unloading: 10 micron flexible no channel bags Operating Humidity: 20 to 80% Compliance - UL 508A electrical panel Electrical - 50 Hz 208V-240V, 3 phase, Footprint:- 24ft. Dimensions - 99" ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMiscellaneousClamping SystemDIN ISO 7388 CabineFull protection cabinCoolant supplyMulti-jet unit at horizontal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump output: 40 l/min / 10.4 gallon/min at 2 bar / 29 psi for horizontal head (theoretical pump performance) coolant tank capacity: approx.NC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mmTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or ...

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base machKi ...

GeneralTurn- mill machining centre; Control: Siemens sl Operate3G without ShopTurn appr 2 channel Tool magazineNumber of tools38 Max. tool length250 mmMax. tool diameter70 mmMax. tool weight3 KgB-axis Turning-milling spindleSwivelling range+/- 120 degreeSpeed range B3100 rpmAngular value, min.1 degreeTurning-milling spindleSpindle taperCapto C5 Drive power (100% DC)5,5 kWSpindle speed-20000 rpmDrive power (40% DC)7,5 kWTorque (100% DC)22 NmTorque (40% DC)30 Nmangular value, min.5 degreelocking moment700 NmB-axis counter spindlePositioning angle B3-axis, in 5 degree steps0 - 225 degreeSpeed range B340 rpmSlide 3Longitudinal stroke665 mmRapid traverse Z36 m/minSlide 1Longitudinal stroke454 mmTransverse stroke380 mmRapid traverse in X40 m/minY axis, vertical+/- 105 mmRapid traverse in Z50 m/minRapid traverse in Y40 m/minHeadstock, rightClamping chuck Ø140 mmSpindle bore38 mmSpindle diametr ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ap ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmTool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper MiscellaneousClamping SystemHSK-A 63 Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring s ...

A vacuum former used in the illuminated sign making industry, but has other applications as well. Bought in December 2017, has been used less than 100 hours. In a very good condition. Manufactured by Computerized Cutters Inc. Original price 43 545€. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch ) Sheet size 1500 x 2000 mm ( 59 inch x 79 inch ) 2. Minimum thickness 2 mm ( 0.078 inch ) 3. Maximum thickness 5 mm ( 0.196 inch ) 4. Maximum size to form 1300 mm x 1800 mm ( 51 inch x 110 inch ) depending on used material and form of the mold. Material PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Vacuum pump. Type 12 PBO Capacity 7 CFM (12 m3 / hr) Vacuum 10 mbar ( 0,145 PSI ) Vacuum. Used vacuum level-0.9 bar ( -14.5 PSI ) Content vacuum t ...

1. LBBC Autoclave (AC3) Working diam. 600mm (2ft) Working: 1500mm (5ft) Max. working pressure 100 PSI 2. LBBC Autoclave (AC3) Working diam. 750mm (2ft.6”) Working: 1200mm (4ft) Max. working pressure 80 PSI

Thermo Fisher Scientific/Dionex Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3,000 ml/min (capillary) Accuracy of flow rate: < 0.1% Precision of flow rate: < 0.1 % Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used Scope of delivery: (See pictures as pictured) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

4 up thermal CTP Kodak Magnus 400 p. 4up CTP IALDA laser head 2019 (no thermal head) Year: 2008 (Refurbished by Kodak in 2009) Plate counter reading 27,371 Current error: Plates are loaded incorrectly / registration is incorrect Incl. dongle, Prinergy Evo RIP, Windows XP computer Minimum panel format: 311 x 228 mm Maximum panel format 680x750 mm approx. 16 plates / h + Kodak Magnus 400 Conveyor Load manually Calculator including KODAK Preps HP xw4600 Workstation Windows XP Professional 2002 Intel® Core ™ 2 Duo CPU E8500 3.16 GHz 3.48 GB of RAM Kodak Preps 5.3 Kodak Mercury MK6 850 Year: 2005 (general overhaul 03/2009 by Kuhnen Media GmbH) Plate count: 22,977 3x 20L KODAK 400 xLo Plate Solution developer solution Maximum panel width: 850 mm Minimum panel length : 620 mm with middle developer rollers 320 mm (available) Plate thickness: 0.152 - 0.5 mm Wa ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

Stock# U2403-1 Used stainless steel homogenizing mixer by Brogtec (CH) model MH-8. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor  ...

Takang TKV-860-HT CNC Twin Spindle Vertical Turning Center Year 2015 . GENERAL SPECIFICATIONS Max. Cutting Diameter: 800 to 1000mm Max. Swing Diameter: 1000mm Max. Cutting Length: 860mm Spindle Motor (FANUC aP40): (2) 50 HP Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10-1500 RPM Spindle Nose: A2-11 Spindle: Spindle Motor (FANUC aP40): (2) 50hp Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10 - 1,500rpm Max Chuck Diameter: Installed 31.5" 3- Jaw Hydraulic Chucks Spindle Nose: A2-11 Front Bearing Diameter: 7.87" Spindle Bearings: Double Row Cylindrical and Angular Contact Spindle Speed Selection: Direct RPM Programming Spindle Speed Override: 50% ~ 200% Speed Range Shift: 2- Speed Gearbox Programmable High-Low Range Axis Drives: X Axis Travel (FANUC a22/3000i AC 4.0 HP): 18.31" Z Axis Travel (FANUC a22/3000iB AC 5.0 HP): 33.07" X Axis Thrust Force: ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmVertical850 mmCross1050 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H12 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360  ...

Available in stock 1 x Capstone Dump Valve. Most commonly used for Microturbines C60. Complete with tube and support (P/N 516065-001). The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 24 VDC Power: 9 W Pressure:140 PSI Air/Gas; 140 PSI Liquid

GeneralTwo- Spindle Turning Centre; Control: Sinumerik 840C Tool holder 2Shank diametre according to DIN 6988030 mmNumber of tool stations12 Number of driven tools12 Speed max.-4000 rpmPower max. (100% DC)5 kWPower max. (40% DC)6,5 kWTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (100% DC)5 kWPower max. (40% DC)6,5 kWSlide 3 (Spindle 2)Longitudinal stroke600 mmRapid traverse Z30 m/minFeed rate torque (100% DC) in Z700 daNSlide 2Longitudinal stroke555 mmTransverse stroke190 mmRapid traverse X20 m/minRapid traverse Z30 m/minSlide 1Longitudinal stroke555 mmTransverse stroke190 mmY axis, vertical+/- 40 mmRapid traverse in X20 m/minRapid traverse in Z30 m/minRapid traverse in Y7,5 m/minFeed rate torque (100% DC) in X/Y/Z400/700/700 daNMain drive 2Type of main driveAC Drive power (100% DC)14 kWDrive power  ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 3Longitudinal stroke1200 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form ADNC rotary table with pallet changerType of Measuring system Direct measuring systemTool magazine,chain, 60 pocketsTool magazine chain magazin ...

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmTool magazine, wheel, 63 pockets HSK-A63Tool magazine wheel magazine (1 wheel) with 63 tool pockets HSK-A ...

Hydraulic pump with motor, axial piston pump NACHI UPV-1A-22N1-22A-4-4412H pump: PVS-1B-22N1-U-12 Volumetric flow: 10,5 gpm ( 29.7 l/min ) Pressure: 3625 psi ( 250 bar ) Pressure range: 286 - 1000 psi ( 19.7 - 68.9 bar ) Displacement: max. 22 cm3 / U Speed: max. 2000 rpm motor: TOSHIBA Type: IK FCKLA21 100L 2.2 kW 1400 / 1680 / 1710 rpm 200 / 200 / 220 V 3AC 50 / 60 / 60 Hz IP44 New ! Dimensions: 480 x 260 x 200 mm

Pressure hose KREMLIN 050 450 801 1839 - KREMLIN REXSON - TUYAU/HOSE 4.8 mm - 3/16 hp/WP = 120 bar / 1740 psi PLNE/BP = 480 bar / 6960 psi Length: approx. 5.0 m New ! Dimensions: 450 x 450 x 50 mm

Medium Frequency Welding Inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 GK100LS105 1070086966-102 100 A 400 V with control cabinet ! even without cabinet SG266 !; Dimensions: 800 x 450 x 450 mm

Medium frequency welding inverter, welding inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 110 A 400...480 V also with cabinet SG265 ! Dimensions: 465 x 315 x 320 mm

• Diaphragm pump to fill suspensions with HFA 134a or 227 • Continuous delivery from the storage tank • Output 24 ltr./min • Compressed air operated, pressure ratio compressed air/suspension 1/2.4 • Contact parts made of AISI 316 L (DIN 1.4535) • Static pressure ratio compressed air/suspension 8-10 bar / 116-145 psi • Compressed air 6 bar / 87 psi • Mobile

Material: 316 L stainless steel Tank pressure: 50 psi / approx. 3.5 bar Double jacket pressure: 90 psi / approx. 6 bar Temperature: 300?C Heat source: external (not supplied) Diameter: 600 mm / Depth: 600 mm Hinged lid 3 clamp connections diameter 50 mm 1 temperature tap Total opening / closing 8 clips Total draining Year: 1988 Mobile unit : 4 wheels

Key data: 96 bar

Kremlin Rexson 16-120 Air Operated ATEX Pump Manufacturer: Kremlin Rexson Type: 16-120 Air inlet pressure: 6 bar / 87 psi Propulsion: Compressed air 96 bar 1392 psi More items new and used - can be found in our shop! International shipping costs on request!

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...

Rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,958 liter per revolution / 0,253 gallon per revolution. Maximum nominal capacity: 34,1 m3/h / 150 gpm. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 13,8 bar / 200 psi. Maximum pump speed: 600 rpm. Weight: 138 kg / 305 lb., Excluding:, - Motor., Type of Machine: Rotary positive displacement pumps - L ...