| Cabine |
Full protection cabin |
| Motor spindle 20,000 rpm |
Motor spindle speedMASTER® HSK-A 63 Spindle speed
20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm /
86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) |
| Taper cleaning brushes |
Taper cleaning unit with rotating brushes for
spindle taper HSK |
| NC swivel rotary table DirectDrive C |
NC swivel rotary table direct drive C-axis with
pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1
direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly
turning Swivel range A axis: +120°/-120° (replacement of base
mach |
| Kinematics axis A / C for swivel rotary
table |
Axis kinematics A/C for swivel rotary table Axis
designation swivel axis: A Axis designation rotary axis: C 0°
position A axis: table vertical Rotary axis setting: modulo Machine
datum: In table center on the table top Not compatible with monoBLOCK
kinem |
| Tool magazine, wheel, 123 pockets
HSK-A63 |
Tool magazine wheel magazine (2 wheels) with 123
tool pockets HSK-A63 or optionally chosen spindle taper |
| Operation panel for loading station tool
magazine |
Control panel for loading station tool magazine
with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise
LTSB - 64 bit |
| ICS unit frequency controlled 80 bar 980
l tank |
Internal coolant supply unit: 980 l / 259 gallon,
paper band filter Internal coolant supply, frequency controlled 10
bar/37l/min - 80 bar/31 l/min - 145 psi/9.7 gpm - 1,160 psi/8.2 gpm
through spindle centre (AD) External coolant supply 4 bar / 58 psi -
4 |
| Rotating clear-view window |
Rotating clear-view window cabin door |
| Coolant tempering/internal coolant
supply |
Coolant tempering for internal coolant unit 980 lt
/ 259 gallon Heating capacity max.: 3,000 W / 4 hp Cooling capacity
max.: 3,800 W / 5.1 hp |
| Magnetic roller separator for coolant
system |
Magnetic roller separator for coolant system for
the machining of cast iron |
| Split-able chip conveyor |
Separable chip conveyor Less space required behind
the machine for pulling out the chip conveyor in case of
maintenance |
| Oil and emulsion mist separator |
Oil and emulsion mist separator Mechanical filter
Throughput volume 1,100 m³/h |
| Cooling |
Cooling by air blast through spindle centre,
selection with M function |
| Infrared measuring probe Heidenhain HSK-A
63 |
Infrared measuring probe Type Heidenhain TS 649
DMG HSK-A 63 |
| Tool measuring in machining area Blum
Laser |
Tool measuring in machining area Blum Laser
DIGILOG Tool length and diameter measurement vertically |
| Tool breakage control mechanical |
Tool breakage control mechanical version |
| 3D quickSET extension package |
3D quickSET extension package for each further
machine: software / password (only together with option measuring
probe and existing set of measuring tools) |
| VCS Complete extension package |
VCS Complete extension package for each further
machine: software / password (only in conjunction with option
measuring probe or existing set of measuring tools) |
| Sensorpaket i4.0 |
Sensor package i4.0: MPC Machine Protection
Control SGS Spindle Growth Sensor ICS flow sensor |
| Maintenance Package I4.0 |
Maintenance Package I4.0: - measurement of tool
pull-in force - autom. lubrication of tool clamp - monitoring of
pneumatics |
| rotoLENS - milling head camera |
rotoLENS - Camera with rotating lens integrated in
the milling head Visualization via CELOS and HDMI Digital zoom and
recording function |
| rotoLENS - working envelope camera |
rotoLENS - Camera with rotating lens integrated in
the machine roof D4452871 Visualization via CELOS (delayed) and HDMI
(real time) Digital zoom and recording function |
| proTIME |
proTIME Visualisation of the remaining runtime,
remaining workpieces and the machine state |
| Laminated safety glass |
Laminated safety glass for window in right cabin
door |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area
Release after completed check list |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/ surface/ speed |
| MDynamics package |
Deckel Maho package MDynamics Improved surface
quality combined with reduced machining time |
| Interpolation turning |
Interpolation turning Turning-recessing cycle
Manufacture of simple sealing surfaces and grooves using Machining
Centres. For Siemens control only in horizontal and vertical
plane |
| Efficient Production Package |
Efficient Production Package Solutions for a safe
prozess and for the efficient use of important machining steps |
| The machine is delivered with standard
accuracy in accordance with the DECKEL MAHO test report |
The machine will be delivered in Standard accuracy
according to DECKEL MAHO Test protocol. Positional uncertainty
Pmax=0.012mm Cooled feed drives, cooled ball screws, additional
Cooling unit and coolant temperature control remain in the
machine. |
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Special equipment |
Condition Analyzer |