psb used for sale

KASTO PSB 260 AU Cutting diameter:260 mm saw blade length:450 x 4 x2 mm total power requirement:22,6 kW Weight approx.: 1024 kg Dimensions:1500 x 2310 x 955 mm square:240 x 240 mm Flat material:260 x 180 Clamping pressure:40 bar Documentation: available equipment: coolant device multi-clamping device, multiple feed ( not automatic) saw blade breakage monitoring reduce rapid traverse clamping pressure regulation

Pressure switch PARKER PSB100SR2A4 Pressure range: 10 - 100 bar maximum operating pressure: 315 bar Switching capacity: 250 V AC, 5 A / 50 V DC, 1 A approx. 1.0 m Connection cable spare part for HECKERT CWK400 D machining centre, among others !, used ! Dimensions: 230 x 42 x 83 mm

Pressure Switch PARKER PSB040AV1A5 Pressure range: 3 - 40 bar max. Operating pressure: 315 bar Switching capacity: 50 V DC, 1 A 250 V AC 5 A New ! Dimensions: 164 x 40 x 80 mm

Pressure switch PARKER PSB250SR2A4 Pressure range: 20 - 250 bar maximum operating pressure: 315 bar Switching capacity: 250 V AC, 5 A / 50 V DC, 1 A spare part for HECKERT CWK400 D machining centre, etc. used ! Dimensions: 220 x 42 x 78 mm

Pressure Switch PARKER PSB040AF1A52

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

cutting diameter: 280 mm band length: 450 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 280 x 160 mm capacity 45 degrees: round: 180 mm dimensions of saw-blade: 450x40x2,0 mm engine output: 2,6 kW height of material-table: 500 mm weight of the machine ca.: 495 kg range L-W-H: 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Sawing area 90 ° round: 280 mm 90° flat: 280 x 160 mm 90° square: 240 x 240 mm 45° round: 180 mm 45° flat: 150 x 250 mm 45° square: 170 x 170 mm Stroke rates: 40 / 51 / 64 / 80 / 102 / 128 mm Cutting speed: 11 - 36 m/min Saw blade: 450 x 40 x 2.0 mm Material support height: 600 mm Engine power: 5 kW Dimensions (WxDxH), approx.: 750 x 1700 x 1100 mm Weight, approx.: 495 kg Equipment: - Cutting feed infinitely adjustable - Coolant device incl. pump - Roller trestle

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 2x available -with: 20x Widia plates each -Weight: 1 kg

cutting diameter: 180 mm band length: 375 mm capacity 90 degrees: round: 180 mm capacity 90 degrees: square: 180 mm total power requirement: 1,5 kW weight of the machine ca.: 1,1 t dimensions: 2,1 x 1,7 x 1,0 m Automatic hacksaw - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal Pass Average Cutting Machine for bun-shaped baked goods or for cutting breads in half with 1 band knife with lubrication Channel width approx. 35cm Duct height adjustable via material pressure 15cm max. completely stainless steel

pressure: 50 t chamfer lenght: 3075 mm distance between columns: 2600 mm Control: Sintesi throat: 250 mm upper clamping stroke: 140 mm dayligth: 295 mm pre-running speed: 90 mm/sec press speed: 1-7 mm/sec return speed: 62 mm/sec total power requirement: 4 kW weight of the machine ca.: 4,4 t dimensions of the machine ca.: 3,7 x 2,2 x 2,2 m Condition: ready for operation: Video(s) available on our website.: CE signed: Electric 380 Volt: Foot switch: 2-hand-control panel: Upper tool divided: 3000 mm Upper tool: spitz/gekröpft Matrize: 1 V / geteilt, 3000 mm Matrize 4 V: 3000 mm Protective railing behind, right + left side: Mot. back gauge: 600 mm crowning system: Hydraulic press brake with Sintesi microprocessor control for the axes Y1 + Y2 immersion depth and x back gauge. The control calculates and controls the immersion depth by specifying the bending angle and the position of t ...

Description: Hydraulic hacksaw machine - Coolant device - 2 speeds Cutting diameter 180 mm Saw blade length 375 mm Cutting range at 90 degrees: around 180 mm Cutting area at 90 degrees: square 180 mm Total power requirement 1.5 kW Machine weight approx. 1.1 t Dimensions L x W x H 2.1 x 1.7 x 1.0 m weight approx.: 1,100 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,700 x 1,000 mm

cutting diameter:260 mm band length:450 x 4 x2 mm total power requirement:22,6 kW weight of the machine ca.:1024 kg dimensions of the machine ca.:1500 x 2310 x 955 mm square:240 x 240 mm flat material:260 x 180 clamping capacity:40 bar Documents:vorhanden

Hydr. Hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Masch. No. 115 106 1212 / 72783 Year of construction 1986 Saw area - round 250 mm Saw area - square 225 x 225 mm Saw area - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mm Motor power 1.4 and 1.8 kW pole switchable Mains connection 380 Volt, 50 Hz - only for 90 cuts, no miter adjustment- Saw motor with 2 speeds and 3 V-belt steps - Hydraulic saw bracket feeding - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for saw bracket lower - manually via handwheel height-adjustable material support table with mm scale - manual material tension - Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1500 x 700 x 1550 mm Weight 590 kg very good condition; used