prot used for sale

Beckman Proteomelab PF 2D Protein Fractionation, Integrated Protein Fractionation System 1. Dimension collecting protein fractions based on pH of the mobile phase 2. Dimension Reverse phase separation of the fractions Hardware: -Injector -pH monitor -UV detector -fraction collector 2. Dimension Fraction Collector -HPRP module, high performance reversed phase module -column heater -UV detector Software

Motor output: , kW automatic: , Table dimensions: , mm ! Please notice the VIDEO of this unit ! For window producers we recommend a spinde with 40 mm diameter and 160 mm usable length, Tools should have inside diameter of 110 to 120 mm Attached the description with options as pdf-file. Price list on request! For window production the manufacturer recommends following options of price list: Art.-Nr.bo1000 base unit Art.-Nr.bo1050 protection Art.-Nr.bk0180 arc marker Art.-Nr.gt0250 glazing bead construction 1 lengthenning : bo1720 ot bo2510. (technical details according to manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ladies and gentlemen, we offer: Alligator scissors shepherds: Type: Proto III Drive: 18.5 KW Number of cuts per minute: 22 Measuring opening Knife tip: 310 mm Knife length: 810 mm Weight: 6.8 tons Machine has been overhauled. Control cabinet renewed

Protec development machine (wet) Optimax

Protec development machine (wet) Compact 35

: 0600 mm : 300 mm : 342 mm : 700x340 mm : 355x38x127 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0800 mm : 400 mm : 342 mm : 900x460 mm : 355x38x127 mm : 2400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Protec Optimax • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 1500 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 2400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10265 Manufacturer: PROTH Type of control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Serial no.: 0011G-05 Max. Grinding length: 600 mm Grinding Width: 300 mm Workpiece Height: 312 mm Travel X: 700 mm Travel Y: 340 mm grinding wheel dimension: 355 x 25 x 127 mm

Model: Trak DPM 750 Type: AEVF Serial No.: 513352 Controls: Proto Trak MX3, switchable to MX2 Travel: X, Y, Z 750 x 400 x 610 mm Table size: 1270 x 320 mm Weight: 1900 kg Year of construction: 1995 Country of origin: Taiwan

Power supply, power converter, power supply unit, switched-mode power supply, fire protection control unit -Manufacturer: Ströbich, protronic -Product: Control panel for power supply fire protection control RZ7 NT24-BMZ2 -Dimensions: 180/130/H2 mm -Weight: 0.1 kg

Professional pallet wrapper with stretch film height adjustment Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph

Dräger Protection Unit 6904409 complete unit Year of construction 2013 The item is technically in good condition, Nevertheless, this is a used items, which shows signs of wear, or may have.

Travel paths X/Y/Z: 900 x 400 x 200 mm Table size 800 x 400 mm

Noise protection cabin with indoor crane, used as a welding cabin (therefore optionally with extraction). HüWa noise protection cabin with crane runway including 2 Demag cranes & electric rolling doors. Cabin dimensions: L = 26,000mm, W = 8,000mm, H = 5,300mm Data cranes: Track length: 25,000mm, load capacities: 1,000kg / 500kg, beam lengths: 7,000mm / 7,000mm. KBK crane track with suspensions Crane 1 with electric chain hoist including energy supply and circuit breaker, including electric trolley and crane travel KBK double girder crane load capacity 1,000kg, Electric crane driving with RF125 crane 2 with electric chain hoist including energy supply and circuit breaker, in aluminum version KBK double girder crane load capacity 500kg. Cabin is dismantled and stored in A-4942 belts. Find more here - / Contact us at -

Aircooled chiller/Heat pump SYSTEMAIR AQR290-H050.PROTO 46/54kW Cooling capacity: 46 kW / 13 tons (12/7 — 35°C) Heating capacity: 54kW / 15,3 tons (40/45 —7°C) Year of manufacture: 2023 Options; Heat pump Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Type of refrigerant: R290 Number of fans: 1 pcs. Dimensions: 2.25x1.1x1.75 m Weight: 507 kg Working hours: 0/0 h. Condition: outlet: new

End mill, shank mill, milling cutter -Six-cutter -Finishing cutter -Diameter: 32 mm -Usable length: 200 mm -Type: HSSE N30 -Quantity: 9 pieces -Sale: only complete set -Weight: 12 kg

Manufacturer: Protool, Type: Bohrm. DRP 8 E, Drilling engine kW: 0,460, FREE TEXT: mit Ständer,

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 10 kg

Separator - S+S Metal Separator Protector 40 (2 pcs.) Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Description Gravimetric/Volumetric Doser Voltage: 230 V Approximate hopper capacity: 10 L Single-phase aspirator Voltage: 230 V Approximate capacity: 5 L GRAVIMETRIC/VOLUMETRIC DOSER

Watercooled chiller/Heat pump Climaveneta Prototipo PDC NX WN 1204 396 kW/439 kW Cooling capacity: 396 kW / 112.6 tons (12/7 — 35°C) Heating capacity: 439 kW / 124.8 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZP385KCE-TWD-522 (scroll) Type of refrigerant: R410a Dimensions: 2.65x0.89x1.8 m Weight: 1740 kg Working hours: 146/86/136/81 h. Condition: Outlet

Description Single Phase Suction Unit Voltage: 230 V 50/60 Hz Power: 0.8 Kw Approximate capacity: 3 L

Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: +/-0.008mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible.

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

BRINE INJECTOR WITH FILTER UNIT, STORK PROTECON TYPE: PI-92-100 Technical description: Serial number: 576 Number of needles: 92 Filter: ? 0,2 mm Clearance: 400 mm Power supply: 380-440 V/50-60 Hz Filter unit dimensions: 1400 x 430 x 900 mm Dimensions: 2300 x 900 x 1700 mm

A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.

Gravimetric Dosing Unit - ProTec Polymer Processing SOMOS® Batchmix L / Like New Year of manufacture: 2018 Location: Lodz, Poland Description: Gravimetric dosing unit – six chambers with automatic weighing and its own mixer, very precise Dosing programming – six materials can be fed simultaneously or one at a time Weight: 255 kg The device was exhibited as a demonstration device at the fair and was not in continuous production Price: On request

Gravimetric Dosing Device - ProTec Polymer Processing SOMOS® Batchmix XL / Like New Year of Make: 2017 Location: Lodz, Poland Description: Gravimetric dosing unit – six chambers with automatic weighing and its own mixer, very precise Dosing programming – six materials can be fed simultaneously or one at a time Weight: 320 kg The device was exhibited as a demonstration device at the fair and was not in continuous production Price: On request

Separator - Sesotec Protector 40-PP / New, unused Year of Make: 2020 Location: Lodz, Poland Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

CINCINNATI PROTON 45-30G Attention: Machine in left-hand version Screw diameter: 45 mm, L/D = 30 Grooved catchment zone Motor (DC drive): 65 kW Screw speed: max. 320 rpm Tool zones: 4+1 for adapters Melt pressure & temperature sensor included EXcPRO-NT control incl. CAN bus for data communication Air conditioner for control cabinet Cylinder in bimetal design – condition: very good Screw with few operating hours – condition: very good Without material funnel & without adapter

3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site ins ...

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 2500 mm weight: 275 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laminator Protopic Plus 520 Year of manufacture 2007

Maximum Diameter: 110 mm // Minimum Diameter: 32 mm

Coffee grinder Manufacturer: Schärf MAZZER Type: xmill-Protect Precision grinder with conical solid grinding discs Slow rotation for optimal grinding quality Robust stainless steel housing Power supply: 220 – 230 V / 50 Hz / 900 W (Operation via normal household electricity) Safety mark: GS and CE Weight: 25 kg Dimensions (W/H/D) approx.: 285 x 820 x 400 mm Ideal for professional use in the catering industry.

A total of 23 Mazzer Luigi/Schärf coffee grinders are available. Grinding system: conical, grinding diameter: 71mm, motor power: 900W, speed: approx. 430rpm. Machine dimensions X/Y/Z: approx. 285mm/820mm/400mm, weight: approx. 25kg. Some grinders come with a separate key that will be provided. One grinder is defective. Documentation vorhanden. An on-site inspection is possible.

PAPER COUNTER B.MATIC DUAL SYSTEM PROTEC PCT 2 -Year 2004 -Touch screen control, many languages available -Max table inserter size 70x100 cms. -It can count sheets of paper, cardboard and plastic from 40 to 500 GSM at a speed of 2.500 sheets/min, without scratching or curling the corner -Counting takes place physically by picking the sheets one by one -It is also possible to split the ream by means of a separation tab which can be programmed on the touch screen -In nice conditions, available in January

This 3-axis Proth PSGS-3060AH surface grinding machine was manufactured in 2008. It offers precision and durability for various grinding applications. Consider the opportunity to buy this Proth PSGS-3060AH surface grinding machine. Contact us for more information.

This 3-axis Proth PSGS 3060 BH / S1 surface grinding machine was manufactured in 2018. It features a table size of 300 × 600 mm and an electromagnetic chuck of the same dimensions. The grinding wheel measures 355 × 38 × 127 mm. Powered by a 3.7 kW spindle motor, this robust machine weighs approximately 1,900 kg. Consider the opportunity to buy this Proth PSGS 3060 BH / S1 surface grinding machine. Contact us for more information.

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

This 6-axis GANNOMAT ProTec 571 was manufactured in 2017, featuring a precise steel worktable and a working stroke length of 1000 mm on the X-axis. It includes a drilling unit with 13 vertical and 6 horizontal spindles, a milling unit with a power range of 3000-18000 rpm, and a grooving unit in Y. If you are looking to get high-quality woodworking capabilities, consider the GANNOMAT ProTec 571 machine we have for sale. Contact us for more information.

TECO Office 600 All FUll time surge protection

table diameter: 600 mm table load: 250 Kg swivelling range: 0 - 135 Grad turning speeds: 0,03 - 2,0 U/min connected load frequency: 400 V weight: 0,4 t Dimensions (LxWxH): 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GMP PROTOPIC 520 MAX SHEET SIZE 520 X 720 MM MAX SPEED 15 M / MIN AUTOMATIC SHEET SEPARTOR MANULA FEEDER OIL TEMPERATURE CONTROLLED LAMINATING ROLLER COMPRESSOR

Size: 540 mm Equipments: Laminating Speed: 15 mtr/min Laminating Film: OPP PET NYLON. Matt & Gloss plus special digital film Paper Thickness: 120-350 gsm Pressure Control: Pneumatic cylinder Heating System Heating System: Hot roller internal infrared heater Temperature Hot roller internal infrared heater Temperature Range 0-140 C Warm up time: 10 min Automatic Feeder Film Core: 76mm Power Requirements: 220-240V 50/60Hz Power Consumption: 2300W 10 5A Weight: 240 kg Dimensions (WDH): 860 x 1585 x 595 mm

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutters: indexable insert end mills with internal cooling, 8 pieces -Receptacle: Ø 32 mm -Diameter: 32 to 43 mm, see photos / parts list -Levy/Price: complete -Transport dimensions: 400/200/H60 mm -Weight: 8.7kg