project a used for sale

The ASCO CB 8000 conveyor belt is a powerful solution for transporting bulk materials efficiently over longer distances. With its impressive 8-meter length, this conveyor is designed to handle high material throughput, making it ideal for demanding tasks on construction sites, in composting facilities, earthworks, and industrial recycling. Built for continuous operation under heavy loads, the ASCO CB 8000 features a robust construction and simple, modular design that allows easy integration into existing material flows or screening systems. Its adjustable belt tension and conveying angle provide precise control of material flow, even with challenging or moist materials. An integrated operating hours counter supports scheduled maintenance and reliable performance during continuous use. Quick to set up and easy to transport, the ASCO CB 8000 is the dependable choice for professionals wh ...

Cutting LEO with extended inlet belt Pretzel Rolls Baguett - Tailor Table unit made of stainless steel Knife height adjustable for average Band speed adjustable DGUV V3 tested Connection 230/240V, 50 Hz, plug-in Transmission width/height 140/ 90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW Machine With warranty Optional: - Driving table for LEO - Cut - Frach kosten

Following Separator available for sale. Make:ALFA LAVAL Type:WHPX 405 TGD 24-60 Serial Number:4020415 RPM:1700-1800 r/m ,142-150 Product No.:881071-01-01 Machine Topper No.:544230-01 Bowl No.:544225-01 Machine Bottom part:540224-02 MOTOR Make:Made in Italy LS 132S 38440 VOLT:440 HZ:60 KW:7.5 RPM:1730

The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE ...

Following separator available for sale. Make: ALFA LAVAL Type: WHPX 510 TGD-24-60 Manufacturing Number: 4015516 RPM: 1700-1800 r/m,142-150 Product Number: 881035-03-04 Machine Topper No.: 544117-02 Bowl No.: 544118-03 Machine Bottom Part: 540225-10

Following Separator available for sale. Make: Alfa Laval Type: MOPX 210 TGT-24 Manufacturing Number: 2997227 RPM: 1700-1800 r/m ,142-150 Product No.: 881030-01-01 Machine Topper No.: 539931-80

Following separator available for sale. Make: ALFA LAVAL Type: MMPX 304 SGP-11-60 Serial Number: 4044302 Speed Max: 9510 r/min Product No.: 881100-01-01 Machine Topper No.: 545964-01 Bowl No.: 54595-01 Machine Bottom Part: 544466-04 MOTOR Make: MAN Volt: 260/440 HZ: 50 / 60 RPM: 3480 KW: 3.55

Following separator available for sale. Make: ALFA LAVAL Type: MMPX 403 SGP-11 Serial Number: 4119247 Year: 2002 Product No.: 881099-03-01 Inlet & Outlet: 561312-01 Bowl: 561123-01 Machine Bottom part: 561371-01 Max Speed (Bowl): 9365 r/min Speed Motor Shaft: 3600 r/min HZ: 60 KW: 2.5 Maximum Density of Feed: 1100 kg/cm2 Maximum Density of Sediment: 2631 kg/cm2 Maximum of operating Liquid: 1000 kg/cm2 TEMP: 0/100 Deg.C MOTOR Make: ABB Volt: 380/420/220/240D / 40/480/250/280b HZ: 50/60 AMP: 4.6/8.00 / 4.67/8.00 RPM: 2880/3470 KW: 2.2 /2.5 COS Q: 0.87 / 0.86

Forty two (42) Quality Used Cummins/Aggreko NCH20-QSK60G22, Dual Frequency 1875 kVA, 480v. 60 Hz. or 1875 kVA, 400v. 50 Hz. Natural gas generator sets. These 1875 kVA units are set for continuous an parallel to gird IPP applications. These units have less than 5000 hours of use since new. The generator is a gas engine driven alternator with control electronics, mounted on a bedplate and housed within a custom-built 20ft stackable container. The standard package is composed of the following: Alternator and engine assembly, Pressurized oil system, Automated control system, Instrumentation, Safety provisions, Engine cooler pack, Silencer, Gas lines including external Low Pressure Gas Train & internal Solenoid Valve The engine and alternator are integrally mounted. This assembly is isolated from the bedplate base by rubber isolation mounts. A 20ft containerised Gas Cooling Module (G ...

Following Separator available for sale. Make: ALFA LAVAL Type: LOPX 705 SFD 30 Serial Number: 4086702, 4087320 Year: 1996 Bowl Speed: 7540rpm Motor Power: 1800rpm No. of Phase: 3 KW: 4 HZ: 60 Made in Spain

Following Separator available for sale. Make: ALFA LAVAL Type: LOPX709SFD34-50 Serial Number: 4082348 Year: 1995 Product Number: 881243-02-02 Machine Top Part: 557114-01

Following Separator for sale. Make: Alfa Laval, Made In Italy Type: FOPX 610 TFD 24 Serial Number: 4097640 Year: 1997 Product No.: 881244-03-03 Machine Top Part: 561012-01 Bowl: 554048-04 Machine Bottom Part: 540225-10 Max Speed Bowl: 5148 Speed Motor Shaft: 1800 El. Current Frequency: 60 Recommended Motor Power: 12KW Max. Density of Feed: 1100KG/M3 Max. Density of Sediment: 1350KG/M3 Max. density of Operating Liquid: 1000KG/M3 Process Temperature min/max: 0/100 OC

Screen bucket / bucket separator ALLU DSB 3-23 The screening bucket is in a good, workshop-tested condition, little run and immediately ready for use. Type: DSB 3-23 15XHD (15 mm) Water volume: 2.3 m³ Earth volume: 2.7 m³ Screening area: 2.3 m² Discs: 215 pieces Dimensions: 269 x 175 x 169 cm (L x W x H) Weight: 3,870 kg Working pressure: 200 - 280 bar Oil consumption: 95 - 235 l/min incl. user manual, spare parts catalogue and declaration of conformity Carrier devices (according to manufacturer): - Excavator operating weight 25 - 35 tons - Loader operating weight 14 - 30 tons The price is net, plus valid VAT. Loading with crane (from above) is included in the price.

Following Separator available for sale. Make:ALFA LAVAL, MADE IN ITALY Type :FOPX 609 TFD 24-60 Serial No.:4093191 Year:1996 Product No.:881244 – 02 -02 Machine Top Part:557057 – 01

R1304Injection moulding machine ARBURG 270-350-90 Multronica thermoset the previous owner sold the Multronica controller for 2,500€ I wanted to convert the machine to thermoplastic. I also found a Multronica controller. There are the following options ---------------------------------------------------------------------- ----------- without control, without funnel, without thermoset device as Spare parts carrier (engine, pump, valves, cylinders, electrics, etc.) €800,-- ---------------------------------------------------------------------- ------------------- with thermoset module + replacement Multronica for assembly €1000.-- ---------------------------------------------------------------------- --------------------- with additional thermoplastic module €1200.-- ---------------------------------------------------------------------- --------------------- all prices +VA ...

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Technical data: Drive motors/ motors Number: 7 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/r/min 1461/228 KW 1.5 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully autom ...

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: SEW Eurodrive Condition: used, not used, Power: 50Hz/r/min 1440/140 KW 0.75 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully  ...

Technical data: Drive motors/ motors Type: three-phase motor Manufacturer: SEW Eurodrive Condition: used, not used, Power: 50Hz/r/min 1440/282 KW 0.75 S1 Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt tracks, inclined belts or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, crafts or the electronics industry. Together, we will develop ways to optimize your flow and material flow cost-effectively and sustainably. We can offer you even fully automa ...

Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.

TO WHOM IT MAY CONCERN ; WE VE NEW - UNUSED COMPLETE ABB SYNPOL D CMA 120 3DDE 300 400 AT OUR STOCK PART NO 5879 PRESENT CARDS LIST ON BELOW CMA 138 CMA 137 CMA 135 CMA 136 CMA 132 CMA 131 POWER SUPPLY IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.

TO WHOM IT MAY CONCERN ; WE VE NEW - UNUSED ABB SYNPOL D CMA 130 3DDE 300 410 AT OUR STOCK PART NO 7049 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Activated carbon filter / activated carbon adsorber KAESER AK64 Serial number 85695 Operating pressure: min. 4 bar - max. 16 bar Operating temperature: min. 4°C - max. 35°C Ambient tremperating: min. 4°C - max. 40°C

We sell 450 x NVIDIA RTX 6000 ADA, brand-new RTX 6000 Ada | 48GB GDDR6 | PCIe 4.0 x16 | 4× DisplayPort Part No.: 900-5G133-2250-000 (Bulk Pack) EAN: 8592978549763 Brand-new with manufacturer warranty! In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used h ...

Oil-water separation system / separator, for compressors KT06 000 01 Replacement filter: XV KT06 AF2

-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

We sell 1500 x Atrust Zero Clients, brandnew in original packaging, EU / German systems With this chip: SOC SMSC UFX6000 10/100/1000 Ethernet In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to compan ...

Technical data: - bending and rolling by hand, - max working width 1020 mm - max. material thickness St 40 1.25 mm - Bending angle adjustment via end stop 10 - 180 ° - max hub upper cheek approx. 85 mm - max. adjustable bending cheek 20 mm - Shaft diameter 55 mm - Upper shaft can be swivelled - Rear shaft parallel + obliquely adjustable - Space requirement approx. W 1500 x H 1400 x D 750 mm - Weight approx. 400 kg

Berges Electronic ACM1K40040H

Meat grinder Seydelmann AE130/3 in a good used and functional condition. made entirely of stainless steel. Angular wolf / automatic wolf, 130mm unger system, 2 speeds. Dimensions B/T/H 110/110/150 cm. Connection values 400 volts, 45 A. Workshop-tested, ready for immediate use. Further on request.

The scope of delivery includes: 01x Attachment frame frames, used Total weight: 27.23 kg Material color: blue Total width: approx. 600 mm Total depth: approx. 800 mm Total height: approx. 950 mm Usable height: approx. 800 mm Opening dimensions: approx. 550 x 520mm(WxH) Mesh size: approx. 50 x 50 mm Wire thickness: approx. 3.00 mm Tube profile: approx. 22 mm Consisting of 2 foldable side panels! 01x Disposable pallets, used Total width: approx. 600 mm Total depth: approx. 800 mm Height: approx. 150 mm Currently in stock Available: approx. 58 pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on  ...

Ultra-Turrax Year built: 1983 Diameter: 220 mm Power: 13.5 kW 380/660 Volt 1460 rpm Wavelength: 1100 mm good condition LWH: 1700 x 400 x 350 mm

Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...

Centrifugal pump Manufacturer: Alfa-Laval (Sweden) Type: ME-155AE N°: 31452-695 Capacity: 30,000 l/h (water) at 28 m height very good condition LWH: 830 x 300 x 450 mm

HEXAGON ROMER ABSOLUTE ARM RA-7525-3 coordinate measuring arm was built in 2014 in France by Hexagon Metrology. The device is used for the precise 3D measurement of complex parts, which are usually inspected on complex metrology devices. The process, thanks to the use of absolute encoders, is performed immediately. Simply switch on the arm and start measuring. What’s more, the universal mount allows the change of measuring probes at any time, without the need to recalibrate. The Zero G counterbalance minimises torque in the base of the device, increasing freedom in mounting options, i.e. lightweight tripods, magnetic and vacuum bases. This solution, combined with immediate acoustic and haptic feedback to the operator, allows the machine to be used in even the most demanding industrial environments. When the HEXAGON portable measuring arm is not in use, it can be locked safely in the ...

ACKLEY TABLET PRINTING MACHINE, MODEL 01511-00038 Year of construction: 2016 Precision rotogravure printing system for tablets and capsules. For pharmaceutical, nutraceutical and confectionery products. Perfect for mid-sized productions. CHARACTERISTICS • adjustable ramp Feed Angle, based on product flow characteristics • continuous motion, multiple-lane carrier bar conveyor feed system that exposes the top surface of the product for inspection and printing • safety enclosure with interlocked doors and enclosed beam path • quick changeover of 60 minutes • requires only compressed air and power for operation • user friendly Operator Control Interface with 17” touch-screen HMI • programmable settings for up to 50 products PRODUCTION • Output: Up to 150,000/h • Printing: alpha-numeric text or graphic logos; can print with solvent or water based ink solutions � ...

SEIDENADER INSPECTION MACHINE V90-AVSB Year of manufacturing: 2011 Inspection machine for vials and ampoules. The product is fed out of the inspection cabin, brought into upright position and is then transferred into various discharge systems (accumulation tables or trays). CHARACTERISTICS • Operators: one • Construction: stainless steel • Several lighting systems available on option (white light source provides diffused illumination from behind the rollers to allow inspection against both a white background - light source - and a black background - the rollers - or vice versa to meet GMP regulations) Output: max. 150 objects/min/lane • Mode of operation: continuous or intermittent (switch) • Working height: 900 mm ± 50 mm ENERGY CONSUMPTION • Voltage: 230 V, 0.8-1.4 kW, 50 Hz standard (all desired voltages possible) SIZE • Dimensions: 2300 x 1000 x 1700 mm ...

CEKOMON sorting line for pallets 800 × 1200 mm, Euro pallets, used pallets, disposable pallets; Complete system consisting of ABB robot for stacking empty pallets on 5 different conveyor belts (5 different storage locations = qualities); hydraulic tipping station for separating pallet stacks; Capacity: approx. 900-1100 pallets per 8h shift; Personnel requirements: 1 employee + 1 forklift driver; DIMENSIONS: 13x18 meters; Conveyor belts driven, incl. PLC controls complete; ABB robot currently out of function cable break; Sale is current condition, without warranty without warranty, disassembly by buyer! CEKOMON sorting line for pallets 800 × 1200 mm, Euro pallets, used pallets, one way pallets; Complete system consisting of ABB robot for stacking empty pallets on 5 different conveyor belts (5 different storage locations = qualities); hydraulic moving station for separating pallet  ...

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: approx. L 1800 mm x W 1100 mm x H 900 mm Empty weight: 1500 kg Flow rate: 14.5 m3/h Technical documentation: no Message: piston: 57mm, stroke rate: 326 min

Parts: -Pelvis -Trolley -Filter -Rectifier -Product carriers -2x supply air system -3x exhaust air system -Refrigerator Specifications - 1 (line) - 1 x (wet turner) Cr Active - 111 Deco Chrome 112, 113, 114 Standing Sink 114 Sinks 116,117,118 Hot Rinsing 123 Dryers 124, 125, 126, 127 Speicher 129 - 141 Unloading Correction Station 142 - 150 El. Stripping 151 - 154 Sinks 155, 156 Stripping Nitric 157 - 161 Sinks 162, 163 Warm Rinse 164 Dryer 165 Speicher 166 - 172 Loading Correction Station 173 - 181 Memory 182 - 209 - - 2 (Line) Sinks 394, 393 PNS 392 Sinks 391, 390 MPS 389 Sinks 388, 387 Free court 386 Satin 385 - 383 Sinks 382 - 378 Gloss NI 377 - 374 Half Gloss 373 - 370 Bdobqwaov Ernfoltljg Sinks 369 - 367 Decapitate 366 Anodes 365 - 363 Sinks 362, 361 Copper 360 - 349 Sinks 348 - 346 Chem. Ni 345 - 342 Sinks 341 - 339 Accelerators  ...

Key data: 200 mm, 400 , 360

Profile Bending machine Model AR360 -Year 2004 MG brand made in Italy OUTPUT SHAFTS 360 MM Capacity as per the original bending chart here enclosed Configuration installed with the machine -Pyramid dual pinch side rolls independent hydraulic positioning bending and pre-bending performance -The 3 shafts driven with hydraulic motor and gear unit individual on each roll -Synchronized speed automatic hydraulic control between the 3 rotating shafts -hydraulic traction tool to roll HEB_INP_UPN bending on hard-side. -Lateral correctors left/right hydraulic operated in 3 directions Tooling with the machine -Set of rollers for pipe: 6” and 12” -Set of rollers with adjustable opening width up to 400 mm ( for all the profiles bending easy way and hard way ) -Set of rings to increase the rollers opening width up to 500 mm ( for all the symmetric profiles b ...

High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: aaprox. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.4 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 rpm, stroke: 105mm