profile grinder used for sale

Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized Profile length: approx. 1,650 mm CS-Sigma.: ca, 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Note: The angles shown are not part of the offer. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own fleet (without discharge)

The scope of delivery includes: 01x U-profile, used Material colour: grey Total length: approx. 6,000 mm U-profile dimensions: approx. 50 x 38 mm Material thickness bridge: approx. 5.00 mm Weight / running meter.: approx. 5,49 kg Weight / pcs.: approx. 32,94 kg Note: - In the U-profiles there are 8 - 10 boreholes with a borehole diameter of 11 - 15 mm! - The U-profiles may be slightly bent, as well as small rust or other damage. General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

End clamp profile Schletter GmbH, solar mounting systems Type 7231526 EC06 Dimensions: L 70mm, B 30mm, H 20mm Price per piece 0.50 approx. 2,300 STK. in stock.

Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

Max punching force: 1100 kN Extension: 510 mm Large support table with material flaps on the punchside Electric contact load stop for heare hydraulic holder for profile and flat steel shears with a wide range of tools ; Very good

Maximum punching force: 1100 kN Maximum shear force: 1700 kN punch ing: 510 mm support table hole 31 in 25 mm flat steel: 500 x 22 mm hydraulic holder for the flat steel knife kago n weight: approx. 5000 kg ; Very good

43.5m aluminium profile at a sensational price €17/m excl., Nut 8mm, 40 x 80mm , used Special price! The current new price of a similar product would be € 38/m = total € 1,650. Take advantage of our one-off package price for 43.5m. If you have a VAT number, we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Scope of delivery: 3 x 221cm, 3 x 217cm, 9 x 200cm, 1 x 192cm, 2 x 184cm, 1 x 138cm, 1 x 129cm, 1 x 109cm, 1 x 105cm, 2 x 98cm, Attention: We also have a package of aluminium profiles 80 x 80mm and 40 x 40 mm. No warranty For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect cons ...

PETEWE optical tool and profile grinding machine PF 3S Projection area: 440320 mm max. grinding stroke: 15-105 mm Stroke number infinitely variable: 0 - 150 rpm. max. grinding wheels through: 175 mm Spindle speed infinitely variable: 5,000 rpm Swivel range grinding head in the horizontal X plane: x 15° side Y plane: . . . . . . . . . . . . . . vertical Z plane: -2° to +10° Grinding head slide movement in X direction: 120 mm in Y direction: 90 mm Adjustment of werkstuecktraeger in X direction: 160 mm in Y direction: 160 mm Sine-mounted clamping plate Clamping: 150 mm 230 mm Sine setting: 0-30°

EDGE SANDING machine for PANEL and PROFILES type FMB 2 I composition : 1° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 2° belt : tilting variable speed sander (with Inverter) - motor power Hp 2 Blowers for belt cleaning Carpet speed variator from 5 to 25 mt / min Upper adjustable presser with rubber wheels Lateral support for wide panels volt. 380/50

- Structure in stainless steel - Workpiece fixing system - Table adjustable - 2 milling spindles - 2 multifunction drilling spindles - Switch box

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

2,000 m construction profiles, U-shape Used goods, good condition, see pictures Galvanized Length per piece approx. 467 cm Profile 7.5/8 cm Material thickness approx. 3 mm Weight per piece approx. 43 kg Negotiation price: € 4,90 net/m ex stock Available individually or as a package A package consists of 20 pieces – approx. 93.4 running meters Goods are in stock. Transportation available on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

According to description pdf attached complete line for profiles + WPC profiles

Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change

: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand Decoral coating profile production line Mfc.: DECORAL Built: 2004 Type: VIV 801/2 – TRANSFER SEMI – AUTOMATIC Output (theoretical): approx. 90 pcs./hour Consist of: Bagging machine – CO 130BB Automatic crane – basket handling Gas Sublimation oven VV801/2.T Electrical Sublimation oven for small parts – 68 kW The table can handle up to 15 profiles per oven batch and given that the cycle time is less than 10 minutes. The line was in operation for 2-3 years only – 1 shift operation!

CATALOG NUMBER 6056 TECHNICAL DATA - max height of the processed material 250mm - working length of the spindle 260mm - 40mm spindle diameter - worktop length / width 630x360mm - guide - 9.3 kW engine - 2 material clamps - pneumatic - diameter of the extraction connector 2x120mm - air demand 8bar - dimensions length / width / height 1370x980x1620mm - weight 450 kg - unpainted - cutters included, 2 pcs - Italian production - used milling machine, very good condition Net price: PLN 22900 Net price: EUR 5264 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations, the price may change)

flat steel: 350 x 10 mm round bar steel: 35 mm square edge steel: 30 mm L-beam: 80x80x8 mm hole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm : 500 kN throat: 177 mm : 34 (Hub 15mm) blade length: 356 mm engine output: 3.0 kW weight: 950 kg dimensions: 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand full automatic mat and shine anodising coating line Mfc.: CISART Built: 2013 Stopped: Capacity: 1,800,000 pieces of profiles per annum Maximum Part Length: 3 m Requested area: approx. 630 m² Operators: 4 - 6 Estimated Full Power Consumption: 960 kW +/- 10% Voltage: 415 V, 50 Hz, 3 ph. Heat Consumption Max.: 500,000 Kcal/H +/- 10 % Water Consumption: 3 m³/h Water Consumption (TAP) by Customer: 10 m³/h Air Consumption: 1 m³/h Heating System: Electricity & Gas Acid Recovery System: 3 kg/h CHILLER 400,000 + 160,000 kCal/hr 40 °C Max. Ext. Temp. Water cooling range: 9-14 °C 190 + 80 kW Dozing System Quantity: 8 Eye & Body Wash Quantity: 2 Qty. 49 Tanks, 3.5 x 1.1 x 3.0 m – L x W x H Weight: 10 ton each Tank made of 2,5 mm thick AISI304 sheets

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 (500) mm : 45 (500) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 80 x 9 (800) mm Axis diameter: 60 mm work speed: 5,0 m/min Tool diameter: 195 mm total power requirement: 3 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: 2 castors hydraulically adjustable 3 rollers driven Resistance torque: 80 cm³ Shaft diameter: 100 mm Roll diameter: 315 mm lateral hydr. Controlled arm correctors left and right CE. Mark Bending capacity square: 120 x 60 x 5 mm Bending capacity flat steel: 130 x 25 mm Bending capacity tube: 114.3 x 6 mm Bending power angle: 100 x 10 mm Round steel: 80 mm Motor power: 11 kW Control panel with digital display Dimensions (length x width x height): approx. 1750 x 1850 x 1650 mm Weight: approx. 3.6 tons Accessories: Various bending rollers Condition: we will still carry out a complete service on the machine The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

Key data: 200 mm, 400 , 360

Profile Bending machine Model AR360 -Year 2004 MG brand made in Italy OUTPUT SHAFTS 360 MM Capacity as per the original bending chart here enclosed Configuration installed with the machine -Pyramid dual pinch side rolls independent hydraulic positioning bending and pre-bending performance -The 3 shafts driven with hydraulic motor and gear unit individual on each roll -Synchronized speed automatic hydraulic control between the 3 rotating shafts -hydraulic traction tool to roll HEB_INP_UPN bending on hard-side. -Lateral correctors left/right hydraulic operated in 3 directions Tooling with the machine -Set of rollers for pipe: 6” and 12” -Set of rollers with adjustable opening width up to 400 mm ( for all the profiles bending easy way and hard way ) -Set of rings to increase the rollers opening width up to 500 mm ( for all the symmetric profiles b ...

Key data: 200 mm, 300 , 200

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

AMOB MAH 40/3 CNC 3-roll bending machine was built in 2021 in Portugal by AMOB Group. The machine, designed for bending tubes and profiles, ensures the highest precision and repeatability of the produced parts. The machining process is performed by three hardened rollers, of which the upper roller has hydraulic adjustment. Each of these is driven by a reliable, high-power motor, which is located inside a fully welded body. This solution enables bending of even the most complex shapes both vertically and horizontally. All this is complemented by an advanced CNC control with memory for numerous programmes. The MAH 40/3 CNC tube and profile bending machine weighs 540 kg. Technical specifications of the AMOB MAH 40/3 CNC bending machine - control panel with CNC control - number of rollers: 3 - roller diameter: 148 mm - roller rotational speed: 12 rpm - number of shafts: 2 - shaft di ...

Petewe PFS 2u

I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.

see pdf attached

pdf attached

Technical data of the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-3,0 Included in delivery: 01x CS Sigma Profile, II Choice Material color: sendzimir galvanized Total length: approx. 2,550 mm CS-Sigma profile: approx. 300x75x15 mm Material thickness: approx. 3.00 mm

ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably  ...

Qty. 1 Second-hand Electrostatic Multi Colour Powder Coating Production Line Mfc.: Gema Type: OptiFlex A2-14 Guns Built: 2013 OptiFlex A2 adjusts the air settings electronically by means of patented DVC System and monitors the production parameters continuously, resulting in a high quality coating Result. Work piece data – Aluminium Profiles Dimensions: 1800 x 400 x 6000 mm – H x W x L Conveyor speed: 2.0 m/min. One new Booth No. 2 (Mobile on rails) Magic Plus Booth” with cyclone recovery installed 2013, consisting of: Gema Electrostatic Powder Coating Equipment type OptiFlex A2 – 14 Guns With OptiFlex AS05 and OptiStar CG06 Gema Reciprocator System type ZA05-23 with carriage type XT10 for remote width positioning and outside cleaning Gema Control System type CM-30 Magic control including height recognition system Gema Quick Color change system Magic Plus with mu ...

Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 4,450 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Scissors for reinforcing steel or bars max 32mm

Profile steel shears

Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 5,500 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

SAHINLER HPK 65 3-roll bending machine was built in 2005 in Turkey by Şahinler Metal Makina Endüstri A.Ş. The machine, designed for precision machining of tubes and profiles, is an excellent choice for any industrial plant. It enables workpieces to be made in circular, arc or spiral shapes with a fixed radius. The machining process is performed by three hardened rollers, of which the two lower rollers have hydraulic adjustment. These rollers are driven by a reliable, high-powered motor located inside a fully welded housing. Depending on production requirements, the SAHINLER tube and profile bending machine can operate in both vertical and horizontal positions. The total weight of the machine is approximately 1000 kg. Technical specifications of the SAHINLER HPK 65 bending machine - number of rollers: 3 - roller diameter: 180 mm - shaft diameter: 60 mm - working speed: 5 m/min  ...

Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used Material colour: sendz. galvanized Total length: approx. 5,600 mm CS-Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg