profile extruder used for sale

General SKU340U844 LocationBarneveld CEcheck MakeBerstorff / Brabender Sizes Screw diameter25 mm Main Features Motor6.5 KW Inlet diameter40 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Number of hoursunknown Screw diameter25mm L/D32 Co-rotatingcheck Ventedcheck Number of heating zones:7 Electric heating±15kW Water coolingweinreich- industriekühlung, 12kW, 1994 DC-motor6,5kW Screw speed240rpm Feeding with hoppercheck Exchangeable segmentscheck Number of temperature controllers:8 Capacity40kg/h Materialstainless steel 1.4122, Stainless cast steel 1.4027 General Typedoppelschneckenextruder DSE 25 Year of construction1994 With switchgear(as is) Floorspace2,6x0,9m Total height1,5m Weight890kg Extra SpecificationsMaximum torque of extruder screw per piece: 90 Nm. Maximum temperature: 400°C. Maximum melt pressure: 300 bar. ...

Extruder for the production of packaging chips built in 1994

General SKU281W438 LocationBarneveld MakeLeistritz Sizes Screw diameter30 mm Main Features Motor16 KW Inlet diameter65 mm L/D30 Specified Features - Double screw extruder Double screw extrudercheck Number of hours3457 Screw diameter34 L/D30 Counter rotatingcheck Ventedcheck With vacuum pumpcheck Number of heating zones:6 Electric heatingcheck DC-motor3 kW (380 V) Screw speed110 rpm Feeding with hoppercheck Exchangeable segmentscheck MaterialStainless steel General TypeLSM-30 34 GG Mach.No.330182401 Year of construction1990 With switchgearcheck Sizes switchgear700 x 500 x 450 mm Floorspace2,75 x 0,91 m Total height2 m Weight1000 kg Extra SpecificationsScrew Dia. 34 mm, center distance 30 mm, screw thread depth 4 mm, 6 heating zones, 7 cool zones,gear speed 2200 rpm / I=20 rpm,Resotec control, extrusion packAgrochemicalsPlastic & polymersCosmeticsAnimal f ...

Key data: 65 mm

Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...

The Kinsley Extruder & Dough Machine Pretzel Stringer KPM W0-9288-1 Model 985.612F is a commercial-grade baking and dough equipment designed for restaurant and food service establishments. This electric-powered floor model features a unique design for creating pretzel strings with ease and efficiency. With the trusted Kinsley brand, this dough machine is ideal for professional bakeries looking to streamline their production process and produce high-quality baked goods.

General SKU359W976 MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra information Extra Specificationsthis unit comes with: -2x k-tron feeders. - control cabinet. - 3x temperature control units. - extruder barrel lift - spare parts AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersLeistritzIndustries > Chemical > A ...

General SKU359W974 MakeLeistritz TypeZSE 18PH-40D GMP-Design Mach.No.03396 Year of construction2005 Sizes Screw diameter18 mm Main Features Motor4.7 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter18 L/D40 Co-rotatingcheck Number of heating zones:8 Electric heating1,0kW (8x) Water coolingcheck AC-motor4,7 kW, 400/230 volt With variable speed drivefrequency converter Screw speed30-600 rpm Feeding with metering screwcheck Exchangeable segmentscheck Number of temperature controllers:7 MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchgearcheck Floorspace2,29 x 0,70 m Total height1,27 m CEcheck Extra information Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extruder The scope consists of: Leistritz ZSE 18 PH-40D in GMP d ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel General TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmPlastic & polymersCatalysts & fillersCosmeticsSolid pharmaceuticsDyes & pigmentsMinerals & inorganicGeneric medicinesMixing extrudersBussIndustries > Chemical > Plastic & polymersIndustries > Chemical > Catalysts & fillersIndustries >  ...

used extruder in good condition. Complete with motor, gearbox and heating bands

General SKU359W977 MakeLeistritz TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra information Extra Specificationsthis unit comes with: - control cabinet. - 3x temperature control units. - extruder barrel lift AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersLeistritzIndustries > Chemical > AgrochemicalsIndustries > Chemical ...

General SKU435U1404 LocationBarneveld MakeKrupp werner &: pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwbrabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 General TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgear(as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersWerner & PfleidererIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsInd ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgPlastic & polymersCatalysts & fillersCosmeticsSolid pharmaceuticsDyes & pigmentsMinerals & inorganicGeneric medicinesMixing extruder ...

General SKUR1061 MakeKrupp Werner &: Pfleider TypeZSK 50 P8.15E Mach.No.20474395 Year of construction2000 Sizes Screw diameter45 mm Main Features Motor51 KW Inlet diameter50 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter45 mm L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motorcheck With variable speed drivecheck Screw speedmax 600 rpm Feeding with hopper(3x) Feeding with metering screwcheck Exchangeable segmentscheck Used oncomposite Capacityapprox. 500 kg/h MaterialStainless steel 1.2379 (X153 CrMoV12) General LocationBarneveld With switchgear(as is) (2x) Sizes switchgear0,9x0,6x2,1 M (1x) 1,6x0,6x2,1 M (1x) Floorspace4,7 x 1,1 m Total height1,5 m Weight4000 kg Extra information Extra SpecificationsWith twin screw side entry Werner &: Pfleiderer ZS-B 58 wi ...

General SKU292M349 LocationBarneveld MakeBerstorff TypeZE-25 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck General Mach.No.EO 0324/88 Year of construction1989 With switchgear(as is) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specificationsincl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersBerstorffIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIndustries >  ...

General SKU300P748 MakeAPV Baker Industrial Extruder Division Ltd (UK) Type50 Mach.No.WEF960037 724/1 Year of construction1996 Sizes Screw diameter50 mm Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50 mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 kW, 230/400 V With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel General LocationBarneveld With switchgearcheck Floorspace2,60 x 1,20 m Total height1,60 m Weight1100 kg CEcheck Extra Specificationsscrews form stainless steel Technical specs Extra informationscrews form stainless steelAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersAPV ProductsInd ...

General SKU011C013 LocationBarneveld MakeLeistritz Sizes Screw diameter110 mm Main Features Motor110 KW Inlet diameter110 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter110 mm L/D20 Counter rotatingcheck Number of heating zones:4 Electric heatingcheck DC-motor10-110 kW, 400 V MaterialStainless steel General TypeZSE-110 Mach.No.86.02.1822 Year of construction1986 With switchgear(as is) Sizes switchgear120 x 70 x 230 cm Floorspace4,70 x 1,40 m Total height2,20 mAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersLeistritzIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Food & Feed > Powdered foodsExtruders > D ...

General SKU304P676 MakeAPV Chemical Machinery Ltd TypePGX 30 Mach.No.800471 Year of construction1989 Main Features Motor4 KW Inlet diameter30 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Number of hours19187 Screw diameter30mm L/D10 Co-rotatingcheck Water coolingcheck AC-motor4,0 KW With variable speed drivecheck Screw speed(161rpm) Feeding with hopperdia.340mm x400mm Feeding with metering screwK-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW Number of temperature controllers:1 Capacity30 KG/Hr MaterialStainless steel 1.2379 (X153 CrMoV12), Stainless steel General LocationBarneveld With switchgearcheck Floorspace1,8x0,8 M Total height2,2 M Extra information Extra Specificationswith extrudermold dia.1mm AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersAPV Pr ...

General SKUR1123 MakeWLS Gabler Maschinenbau KG (D) TypeDE 100/100 No.12482 Year of construction1992 LocationBarneveld Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter100 mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 V Feeding with hoppercheck MaterialStainless steel General With switchgear(as is) Floorspace2,50 x 1,30 m Total height1,70 m Weight2150 kg Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Vincluding 2 spare screwsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersWLS GablerIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries ...

General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zones3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hopperBuss ELS 70 Feeding with metering screw63 rpm MaterialStainless steel 1.4000 (410S) With jacketcheck General TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CPlastic & polymersCatalysts & fillersCosmeticsSolid pharmaceuticsDyes & pigmentsMinerals & inorganicGeneric medicinesMixing extrudersBussIndustries > Chemical > Plastic & polymersIndustries > Chemical > Cataly ...

General SKU288P487 LocationBarneveld MakeWerner &: Pfleiderer GmbH (DE) TypeZSK 70 F175E Main Features Motor80 KW Inlet diameter70.5 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70,5 mm L/D15,3 Co-rotatingcheck Ventedcheck Number of heating zones:3 Electric heating7+7+5 kW Water coolingcheck DC-motor80 kW (1500 rpm) Screw speed300 rpm Used onpowdercoating MaterialMild steel General Mach.No.230 196 Year of construction1990 With switchgear(as is) Floorspace4,0 x0,9 m Weight5700 kg Extra information - Gearbox ratio 5:1 - Including GWK Watercooler AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersW&PIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Fe ...

General SKU103Y799 LocationBarneveld MakeBaker Perkins, Stoke on Trent Sizes Screw diameter30 mm Main Features Motor3 KW Inlet diameter30 mm L/D14 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30mm, Screw length 420mm L/D14 Co-rotatingcheck Number of heating zones:3 (6x 200 Watt per zone) + die heater Electric heatingcheck Water coolingcheck DC-motor3,0 KW, 180 Volt With variable speed drivecheck Feeding with metering screwdia. 32mm Used ontoner General TypeMPC/V30 Mach.No.65034 Year of construction1985 Floorspace2,0 x 0,9 m Total height2,0 m Weight820 kg Extra SpecificationsMoC: screw housing The material 1.0762 or 44SMn28 is an unalloyed quenched and tempered steel. Technical specs Extra informationMoC: screw housing The material 1.0762 or 44SMn28 is an unalloyed quenched and tempered steel.AgrochemicalsPlastic & pol ...

Size: Screw diameter (Ø): 160 mm Equipments: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

General SKU411T126 MakeClextral Framatome TypeEV 32 Mach.No.B 101 Year of construction2000 Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwclextral C0 Number of temperature controllers:8 MaterialStainless steel 1.4306 (304L) General LocationBarneveld With switchgear(as is) Floorspace4,3x1,42 m Total height3.26 Weight3460 kg CEcheck Extra information Extra Specificationsmachine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersClextralIn ...

General SKU219X100 MakeXplore TypeMicro 5 Mach.No.5-03-12 Year of constructionUnknown Sizes Screw diameter10 mm Main Features Motor0.55 KW Inlet diameter5 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter5-10 mm L/D10 Number of heating zones:6 Electric heatingcheck Air coolingcheck Water coolingcheck DC-motor550 watt, 208-240 volt Screw speed1-400 rpm Capacity5 ml MaterialChromed steel General LocationBarneveld With switchgearcheck Floorspace0,70x0,40 m Total height0,85 m Weight220 kg Extra information Screw length 107 mm, volume 5,5 ml., (5 ml.), max barrel temperature 450°C, RKC SR mini touchscreen system, max vertical force 5 kN, pressure 200 bar AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extruders-Industries > Chemical > AgrochemicalsIndustries > Chemical > Plasti ...

General SKU204U042 MakeWerner &: pfleiderer TypeZSK 70F175E Mach.No.231783 Year of construction1996 ( gearbox 2017) Sizes Screw diameter70 mm Main Features Motor108 KW L/D23 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70 mm L/D23 Co-rotatingcheck Water coolingcheck AC-motor108kW, 330Volt, 1500rpm With variable speed drivefrequency controller Screw speed198 rpm Exchangeable segments( not included) MaterialNichrome 2.4869 General LocationBarneveld With switchgearcheck Sizes switchgear1,25x0,7x2,15 m Floorspace4,6x2 m Total height1,7 m Weight6400 kg Extra Specificationsinlet: 142x130 mm- there are 2 screw shafts present- no screw segments present- no extruder head presentFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsBiopharmaceuticalDeter ...

screw ø:: 30 mm screw length:: 25D screw speedl:: -- U/min drive power:: 4 kW Condition: second-hand Specification: Co-extruder, plastic extruder, type 30-25D as good as new, unused, - Screw diameter: 30 mm - Screw length: 25D - Output approx.: 12–18 kg/h - Raw material: Soft PVC/PE/PP/TPE/TPV (in granule form) - Application: Sealing profiles - DC motor power: 4 kW - Extruder zones: 5 (3 on the barrel, 2 on the die head) - Extruder height: 900–1200 mm - Die head connection: Flange connection - Further details are provided in the annex to the quotation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extruder 70 mm - 24 L/D with pipe head up to 63 mm, calibration tank 6000 mm Caterpillar extractor, saw

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

Troester 150mm dia PIN extruder Type: QSM150K, Serial no. 8622/80, Year of manufacture: 1980, but refurbished by Troester 2000 (new screw and barrel section) Power roller feed, L/D ratio 16:1 8 rows of 8 pins, fitted with ASEA 212kW DC variable speed motor and controls (1800rpm). Complete with controls etc and in very good condition.

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.

1 x Werner & Pfleiderer 400mm dia dump extruder, Type: EAE400, Fabrik nr 221284, Werk nr 416295, Year: 1985, double hydraulic crammer feed, feed section 965mm wide, L/D ratio 8:1, with 235kW DC variable speed motor, Sheeting head to produce up to 1000mm wide sheet. Complete with controls and hydraulics etc.

Used EXTRUDER twin screw (TWIN SCREW EXTRUDER) for the production of cereal flakes: Producer: PAVAN Model: TT92 Year: 2002 Dimensions: 6580 x 4150 x 3000 Weight: 2400 kg Productivity: 500 kg / h Power: Description: A twin-screw extrusion device as a result of a continuous and automatic process of a great variety of flour and cereal starches / tubers, both mixed and pure. The materials from the dispensing unit are pre-mixed using a suitable device equipped with counter-rotating blades (double shaft mixer), and then enter the mixing tank for kneading and homogenization. From the mixing tank, through a suitable screw device (forced supply), the mixture is pressed into a group of cooking cylinders in which the cylinders are heated to the desired stage, according to a predefined and automatically controlled temperature profile. compatibility of extruder screws, which are repla ...

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

Multiple extruders

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

Extruder Petersen VAP 65

Nordson / Puffe Extruder Plant Ex20 -1xPS01-1xPE20-1 for melting hot melt adhesives and thermoplastics, feeding as granules. Melting capacity according to the manufacturer's specifications up to 20 litres/h (EX20) Price: 45.000, -- € plus 19% VAT (Gross price incl. VAT 53.550, -- €) EXW Manufacturer: Nordson / W. Puffe Hotmelt-Technology Model No.: Ex20 -1xPS01-1xPE20-1 Year of manufacture: 05/2006 Serial No. 226260231/001 Power: 15 kW, connection 380V three-phase current Emergency stop, traffic light, CE mark Made in Germany Compact system mounted on a stable rolling frame (H= 198 cm, W= 160 cm, D= 110 cm) consisting of Nordson extruder, gear metering pump, Lenze worm drive, control cabinet with Allen-Bradley control, graphical user interface, storage tank, operating manual. Auxiliary: Labotec Minifeed Suction Conveyor MF60 Serial No. 12-103-00669 (Owner's man ...

Industrieöfen- Fertigung und zirlguss Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen schoenheider Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation gienanth Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen ...

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Key data: 30 , 28 , 110

Plant for the production of filament for use in 3D printers Capacity up to 10 kg/h consisting of 30 mm extruder, stainless steel trough, puller and winder with traverse guide

Key data: 150 mm

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

Key data: 30 , 28 , 110

Single-screw extruder with new 7,5kW drive, new gear box, new cylinder and new screw 30 mm - 28 d, nitrated new ceramic heating elements, cooling fan, temperature sensors Control cabinet integrated in the machine frame Machine frame on wheels Stainless steel hopper