profile extruder used for sale

Qty. 1 Second-hand vertical profile painting cabine The equipment is designed for automatic electrostatic spraying of powder paints and varnishes onto long metal products and must be built into a production line equipped with an overhead single-rail closed ring conveyor. Mfc.: TRASMETAL Built: Main technical characteristics Maximum profile size: Width: 120 mm Height: 8,000 mm Length (axial along the conveyor): 350 mm Equipment exhaust ventilation: 24,000 m3/hour Compressed, dried and purified air (water - maximum 1 g / m3, oil - maximum 0.01 ppm / m3) Total flow: 530 m3/hour Pressure: 7 bar Electricity: 380 V, 50 Hz, 3 ph. Power: 235 kW

Głowice do wytłaczania - pakiet 19 sztuk różnych narzędzi, m.in. Kalibrator głowicy + płyty Głowica + kalibrator 2 x 130 Głowica 250 mm + kalibrator Austria Głowica + kalibrator Duża głowica rozszerzająca + kalibrator Mała głowica rozszerzająca + kalibrator Głowica + kalibrator dla Soffit 2 x 160 głowic Głowica parapetu 260 mm cena za wszystkie narzędzia 60.000 Euro.

Bausano Modular Compact Line , All 7m Lenght + Tilting, Maximal Profile Section 180 x 100 mm,, Maximal Traction Force 10 kN, Maximal Speed 15 m/min, Specifications: Calibrator type BP/2P/ML, Lenght Calibrator Holder 2500 mm, Longitudinal Adjustement 600 mm ( Gear Motor- Traverse Motor 0.37 kW ), Transversal Adjustment 40 mm, Vertical Adjustment 880 / 1130 mm, Cooling Water 12 Connections, Vacuums Pumps 2 x 4 kW, Vacuum 16 Connections, Haul-off unit type TNP 15 -150 MB, Tracks Lenght x Wide 1500 x 150 mm, Track Max Opening 95 mm ( 2 Pneumatic Cylinders ), Max Speed : 25 m/min, Max Take Off 23 kN, 2 Direct Gear box Motor to everyone carterpillar , 2 x 1.1 kW, Saw type TAV 90, Max Vertical Adjustment 95 mm, Max Cutting Lenght 300 mm, Motor 1.5 kW, Shaves Suction Motor 1.1 kW

CALIBRATING TABLE BATTENFELD K 160 V2, 2 Speck v-pumps 4 kw / 2 sections, 16 x vacuum-connections, 12 x water-connections, Blower for drying, HAUL OFF BATTENFELD P 100 SV, 2-belt haul-off (type caterpillar), Contact 1.200 x 160 mm, Speed approx. 0,5 – 15 m/min., Motor-power approx. 4 kw, Pulling-power approx. -6.000 N maxi., SAW BATTENFELD SPR 32 P, Profile-saw upstroking, Blade Ø 300 mm, Chip/dust-suction, control panles,, Electric manuals available

VOBAU PROFILE DOWNSTREAM EQUIPMENT, Max Profile Section 250 x 100 mm,, Maximal Traction Force 20 kN, Maximal Speed 8.5 m/min, CALIBRATOR - 4000, Fixing Surface Calibration Tools 4.000 x 400 mm, 3 Vacuum Pumps 5 kW Each, Adjustments :, Longitudinal Lenght , Vertical Motorized,, Lateral Manual ., HAUL OFF - 175, Oscillating Pneumatic Top , Manual Down,, Carterpillers Adjustment, Carterpiller Length 175 x 2300 mm, 2 Gears Motors 2.2 kW , Each, Inverter Control , Maximal speed 8.5 m/min, SAW - 450, Ascending Saw , Suction Shaves, Translation Trolley Cut - 600 mm, Disc Ø 450 mm, Motor 2.5 kW, Tilting Table ., availability: immediate

Hint: No screw material included. Technical data on the restock straps: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Top-up tabs, used total height: approx. 320 mm overall width: approx. 110 mm Inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 50 mm Perforated grid i. d. width x height: approx. 60 x 50 mm Drill holeØ: approx. 10 mm Material color: blue Weight | pcs.: approx. 1,860 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1500 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1150 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1220x1300 mm Weight: 1050 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Morn Laser Type of Machine : PROFILE STEEL LASER CUTTING MACHINE Condition : New Model : MT-H4510 / MT-H50120 HD Series Advantages: - Stable cutting of large-size profile steel - High-precision bevel cutting Parameters: - Profile Steel Processing Range (Customizable): 450×1000mm / 500×1200mm - Laser Power: 12000W–20000W Find more here - / Contact us at -

De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89

Z Blade Mix Extruder Manufacturer Winkworth Model 31Z HMX Mild Steel Total volume 360 litre Working capacity 250 litre Internal dims: 740mm long x 790mm wide x 714mm deep Screw 220mm With oil jacketed trough Lagged and with 3x electric drives

Combex 90 Strainer Extruder Manuf.: AZ / VMI Screw diam. 90mm LD ratio 10-1 AC motor 37kW 1475rpm Year 2010 Complete with Temperature Control Unit and Controls Full manual / documentation available

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

UNION SINGLE SCREW EXTRUDER, barrel with 150 mm Ø screw, 40 L/D, electric cabinet, degassing system, nominal throughput rate ca.700 kg/h, missing of screenchanger - available semi-automatic on separate offer, missing of cutting unit - possible addition of strand/water ring/underwater on separate offer, This is an evergreen sturdy extruder

BANDERA SINGLE LAYER BLOWN FILM EXTRUDER, for LDPE MDPE + RLDPE, 3-stations Piovan volumetric dosing uniit, Screw diam. 80 mm., 200 mm. die, dual-flow Garba Plast head 200 mm (new in 2022), pull off unit, single rewinding unit 1.200 mm. wide, c.a.drive with new inverters, Average throughput rate 100 kg/h, The line can be inspected any time., Recently used for garbage bags, it includes a 1-color printing group, corona treatment, tower included, electric cabinet for conplete management, immediately available, availability: Immediate, PRESENT CONDITIONS: running and testable, ACCESSORIES: corona treatment+1-col. printer

General SKU204U026 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 58 F96E Mach.No.231616 Sizes Screw diameter57.8 mm Main Features Motor74 KW Inlet diameter100 mm L/D27 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter57.80 L/D27 Co-rotatingcheck Ventedcheck Water coolingcheck AC-motorcheck Screw speed191 rpm MaterialNitriding steel 1.8519 Information Year of construction1995 With switchgearcheck (as is) Floorspace2.5x1.4 m Total height1,5 m Extra Specificationsthe currently installed head” on the extruder is a cleaning head. this is not a die. - there are 2 screw shafts present. - no screw segments present. - this extruder comes with brush screws. - the extruder comes with 4 extra housing segments. this extruder was part of a complete system. any associated machines are: Collin Calander Pharma 200x400 , sku: 204U929 Sol ...

General SKU359W975 LocationBarneveld MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3899 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck 9x DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Feeding with metering screwcheck K-tron Exchangeable segmentscheck Number of temperature controllers:1 Used oncarrier material Capacitymax 200 kg/h MaterialStainless steel, Stainless steel 2.4819 (Hastelloy C-276) Information Year of construction2010 With switchgearcheck Total height1,80 m CEcheck Floorspace3,65 x 1,15 m Weight1200 kg Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ us ...

General SKU354T968 LocationBarneveld MakeWerner & PFleiderer TypeContinua 37/27 D Mach.No.220331 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel Information Year of construction1985 With switchgearcheck (as is) Total height2,3 m Floorspace3,2x1,3 m Weight1700 kg Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

General SKU368W1091 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 30 W 9/2 Mach.No.219522 Sizes Screw diameter30 mm Main Features Motor10.4 KW Inlet diameter60 mm L/D33 Specified Features - Double screw extruder Double screw extrudercheck Number of hours8013 Screw diameter30 L/D33,3 Co-rotatingcheck Number of heating zones:8 Electric heatingcheck AC-motor10,4 kW, 440 volt With variable speed drive200-2200 rpm Screw speed4,4:1 Feeding with hoppercheck MaterialMild steel Information Year of construction1985 With switchgearcheck Total height1,30 m Floorspace2,80x0,85 m Weight1100 kg Extra Specificationshomogenizing extruder with spareparts. Double screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

General SKU397W1236 LocationBarneveld MakeWeber TypeCE-03 Mach.No.CE 3061 Sizes Screw diameter35 mm Main Features Motor18 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours50927 Screw diameter35 L/D20 Counter rotatingcheck With vacuum pump0,75 kW, 8 m3/h, 2850 rpm Number of heating zones:1 Electric heatingcheck AC-motor18 kW, 220/380 volt Number of temperature controllers:7 Used onPVC Capacity30 kg/h Information Year of construction1985 With switchgearcheck Sizes switchgear0,75x0,37x1,10 m Total height1,50 m Floorspace1,70x0,90 m Weight700 kgDouble screw extrudersWeberExtruders > Double screw extrudersBrand > Weber What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU340U844 LocationBarneveld MakeBerstorff / Brabender Typedoppelschneckenextruder DSE 25 Year of construction1994 Sizes Screw diameter25 mm Main Features Motor6.5 KW Inlet diameter40 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Number of hoursunknown Screw diameter25mm L/D32 Co-rotatingcheck Ventedcheck Number of heating zones:7 Electric heating±15kW Water coolingcheck weinreich- industriekühlung, 12kW, 1994 DC-motorcheck 6,5kW Screw speed240rpm Feeding with hoppercheck Exchangeable segmentscheck Number of temperature controllers:8 Capacity40kg/h Materialstainless steel 1.4122, Stainless cast steel 1.4027 Information With switchgearcheck(as is) Floorspace2,6x0,9m CEcheck Total height1,5m Weight890kg Extra SpecificationsMaximum torque of extruder screw per piece: 90 Nm. Maximum temperature: 400°C. Maximum me ...

GAMMA MECCANICA AF EXTRUSION LINE (photos and video taken before reconditioning - video includes shredder+granulator available separately), for LDPE LLDPE HDPE PP PS PC ABS, Nominal production rate : 900-1100 kg/h (this varies on material and feeding rate), Average energy consumption : 0,23-0,28 kwh/kg, inlcuding :, Buffer silo, screw conveyor, crammed feeding system, extruder with 160 mmm. screw 36 LD, double degassing system, hydraulic non-stop screenchanger 160/300MF, water ring pelletizer type TFD1000, centrifugal dryer, always ran with clean production scraps, very good running conditions - connected, The line is offered AS IS, See [Constructors page](.gamma-meccanica.it/en/plastic-recycling/plastic-recycling-af/) for more info, options available: reconditioning, capacity: 1.000 kg/h, type: for LDPE HDPE LLDPE PP PS PC ABS

General SKU231U203 MakeLeistritz TypeSZE-50 GL Mach.No.94.91.2168/7 Year of construction1994 Main Features Motor52 KW Inlet diameter49.7 mm L/D40 Specified Features - Double screw extruder MaterialNitriding Steel 1.8550 Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D40 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm Information LocationBarneveld Sizes switchgearcheck(as is) Floorspace4,26x0,80 m Total height1,9 m Weight2000 CEcheck Extra Specificationspower cabinet dimention: 2,26x0,62x2,2 m Gleichlauf GL Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- M ...

General SKU281W438 LocationBarneveld MakeLeistritz Sizes Screw diameter30 mm Main Features Motor16 KW Inlet diameter65 mm L/D30 Specified Features - Double screw extruder MaterialStainless steel Double screw extrudercheck Number of hours3457 Screw diameter34 L/D30 Counter rotatingcheck Ventedcheck With vacuum pumpcheck Number of heating zones:6 Electric heatingcheck DC-motor3 kW (380 V) Screw speed110 rpm Feeding with hoppercheck Exchangeable segmentscheck Information TypeLSM-30 34 GG Mach.No.330182401 Year of construction1990 With switchgearcheck Sizes switchgear700 x 500 x 450 mm Floorspace2,75 x 0,91 m Total height2 m Weight1000 kg Extra SpecificationsScrew Dia. 34 mm, center distance 30 mm, screw thread depth 4 mm, 6 heating zones, 7 cool zones, gear speed 2200 rpm / I=20 rpm, Resotec control, extrusion pack Double screw extrudersLeistritzExtruders  ...

General SKU359W976 MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder MaterialStainless steel 2.4819 (Hastelloy C-276) Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Information LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra Specificationsthis unit comes with: -2x k-tron feeders. - control cabinet. - 3x temperature control units. - extruder barrel lift - spare parts Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condit ...

General SKU252X212 LocationBarneveld CEcheck Sizes Screw diameter15.6 mm Main Features Motor1.25 KW Inlet diameter30 mm L/D25 Specified Features - Double screw extruder Double screw extrudercheck Number of hours2070 Screw diameter15 mm L/D25:1 Co-rotatingcheck Number of heating zones:2 Electric heatingcheck DC-motor1,25 kW, 220/400 volt With variable speed drivecheck Screw speed500 rpm Feeding with hoppercheck Feeding with metering screwcheck vibro Number of temperature controllers:2 MaterialNickel alloy (201) 2.4068, Stainless steel 1.4552 Information MakePrism Mach.No.1464 Year of construction1995 With switchgearcheck Floorspace1,50x0,60 m Total height1,65 m Extra SpecificationsWith input vibration feeder, : output trough double rolls on mobile table, With Chiller plate. Double screw extrudersPrism EngineeringExtruders > Double screw extrudersBrand > P ...

General SKU359W974 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter18 mm Main Features Motor4.7 KW L/D40 Specified Features - Double screw extruder MaterialStainless steel 1.4571 (316Ti) Double screw extrudercheck Screw diameter18 L/D40 Co-rotatingcheck Number of heating zones:8 Electric heating1,0kW (8x) Water coolingcheck AC-motor4,7 kW, 400/230 volt With variable speed drivecheck frequency converter Screw speed30-600 rpm Feeding with metering screwcheck Exchangeable segmentscheck Number of temperature controllers:7 Information TypeZSE 18PH-40D GMP-Design Mach.No.03396 Year of construction2005 With switchgearcheck Floorspace2,29 x 0,70 m Total height1,27 m Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extruder The scope consists of: check Leistritz ZSE 18 PH-40D in GMP desig ...

General SKU411T126 LocationBarneveld CEcheck MakeClextral Framatome Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwcheck clextral C0 Number of temperature controllers:8 MaterialStainless steel 1.4306 (304L) Information TypeEV 32 Mach.No.B 101 Year of construction2000 With switchgearcheck(as is) Floorspace4,3x1,42 m Total height3.26 Weight3460 kg Extra Specificationsmachine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU379X947 MakeFeddem TypeFED 026 MTS Mach.No.201706041 Year of construction2017 Sizes Screw diameter26 mm Main Features Motor34 KW Inlet diameter42 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter26 L/D32/42 Co-rotatingcheck With vacuum pumpcheck Number of heating zones:10 Water coolingcheck AC-motor34 kW, (400 V, 1890 rpm) Screw speed1200 rpm Feeding with metering screwcheck MaterialStainless steel Information LocationBarneveld With switchgearcheck Without switchgear (as is) Sizes switchgear1,8 x 0,60 x 2,20 m Floorspace3,10 x 0,881 m Total height2,072 m Weight2200 kg CEcheckDouble screw extrudersFeddemExtruders > Double screw extrudersBrand > Feddem What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...

General SKU379X944 MakeCollin LocationBarneveld Type20x20 D Main Features Motor4.5 KW Inlet diameter30 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Working hours:1324 Screw diameter20 L/D20 Number of heating zones:4 Electric heatingcheck AC-motor4,5 kW, 3x 380/220 V Inlet30 x 20 mm Feeding with hoppercheck Number of temperature controllers:4 MaterialStainless steel Information No.32000892 Year of construction1992 With switchgearcheck Floorspace1,60x0,60 m Total height0,80 m Extra SpecificationsWith Collin granulator, 0-1400 rpm, 220/380 volt :Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU252X211 MakeBuss TypeTCS30-17D No.452770 Year of construction1999 Mounted on framecheck Main Features Motor5.5 KW Inlet diameter40 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter30 mm L/D20 Number of heating zones:2 Electric heatingcheck DC-motor5,5 kW, 380 volt, 1445 rpm With variable speed drivecheck Inlet40x30 mm Feeding with hoppercheck Feeding with metering screwcheck Number of temperature controllers:2 Materialcarbon steel ST52 1.0570 Information LocationBarneveld With switchgearcheck Sizes switchgear350x250x230 mm Floorspace1,50x0,65 m Total height1,85 m CEcheckSingle screw extrudersBussExtruders > Single screw extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU219X100 LocationBarneveld MakeXplore Sizes Screw diameter10 mm Main Features Motor0.55 KW Inlet diameter5 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter5-10 mm L/D10 Number of heating zones:6 Electric heatingcheck Air coolingcheck Water coolingcheck DC-motor550 watt, 208-240 volt Screw speed1-400 rpm Capacity5 ml MaterialChromed steel Information TypeMicro 5 Mach.No.5-03-12 Year of constructionUnknown With switchgearcheck Floorspace0,70x0,40 m Total height0,85 m Weight220 kg Extra SpecificationsScrew length 107 mm, volume 5,5 ml., (5 ml.), max barrel temperature 450°C, RKC SR mini touchscreen system, max vertical force 5 kN, pressure 200 barDouble screw extruders-Extruders > Double screw extrudersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

General SKU359W977 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) Information TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specificationsthis unit comes with: - control cabinet. - 3x temperature control units. - extruder barrel lift Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU435U1404 LocationBarneveld MakeKrupp werner & pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwcheck brabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 Information TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgearcheck (as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: -- Machine ...

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...

General SKUR1061 MakeKrupp Werner & Pfleider TypeZSK 50 P8.15E Mach.No.20474395 Year of construction2000 Sizes Screw diameter45 mm Main Features Motor51 KW Inlet diameter50 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter45 mm L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motorcheck Feeding with hopper(3x) Feeding with metering screwcheck MaterialStainless steel 1.2379 (X153 CrMoV12) Information LocationBarneveld With switchgear(2x) Sizes switchgear0,9x0,6x2,1 M (1x) 1,6x0,6x2,1 M (1x) Floorspace4,7 x 1,1 m Total height1,5 m Weight4000 Kg Extra SpecificationsWith twin screw side entry Werner &: Pfleiderer ZS-B 58 with 3 x K-tron dosing screws including funnels including 2x vibrating chute and including Bredel hose pump SP / 32 Double screw extrudersW&PExtruders > D ...